Related
can someone help me fix it?
Post this in Q&A instead of general.
Also provide more information.
1. What specifically did you do..step by step
2. What is the phone doing to make you think it is bricked?
3. What have you tried to do to resolve the issue?
4. Have you searched the forum and found the thread on "How to fix a bricked Epic?"
I was using oden and i had on download mode but i took the battery out before the phone reboot... its stuck with a "phone ! computer" logo im looking in the forum for help but cant find the answer... i searched youtube too
check this video tutorial
http://www.youtube.com/watch?v=LhQyIxjzaoA
trying it now ....
my computer says usb device not recognizd
kingjuice said:
I was using oden and i had on download mode but i took the battery out before the phone reboot... its stuck with a "phone ! computer" logo im looking in the forum for help but cant find the answer... i searched youtube too
Click to expand...
Click to collapse
Whenever you get the Phone/Computer logo, pull the battery, then hold 1 and power on. It should go back to download mode. It has happened to me lots of times due to Odin failing to flash (I usually have to rotate pit's before Odin finally flashes for me).
tried that but still no luck... should i reset my desktop?
it worked!!!!
thank you both very much!!!!
Zomg its not bricked........
Bricked = doesnt turn on to anything!!!!!!!!!!!!
Bricked != download mode
it was stuck on one spot and only went to download mode... that is being bricked right?
kingjuice said:
it was stuck on one spot and only went to download mode... that is being bricked right?
Click to expand...
Click to collapse
No. Being bricked is when it wont even enter download mode, and there is no way get it back. If it will get into download mode, you can Odin it back to stock, and so it is NOT bricked. It is VERY hard to really brick this phone.
The term bricked gets thrown around a lot, but when something is bricked it means you can't use it for anything other than a brick. Unless you royally mess something up you should always be able to hold down the number 1 and power to get to download mode.
Now if you can't get your computer to recognize your phone for what ever reason that is another story. That is usually just an issue with you not having your drivers properly installed.
kingjuice said:
it was stuck on one spot and only went to download mode... that is being bricked right?
Click to expand...
Click to collapse
Officially bricked means "up the creek without a paddle" or in other words, you made a 250-600$ mistake. It is when you get absolutely no reaction from the phone or that no one has ever been able to bring the phone out of that specific state back into working order.
If you get the phone working using the tutorial "How to fix my bricked Epic" then it really wasn't "bricked" in the first place. Glad to hear you got it back.
...also I am very proud of the epic forum goers for not completely murdering this guy for this post..
lol sorry guys but thanks again!!!
No problem. Have fun flashing your phone
Sent from my SPH-D700 using XDA App
I just got a SGS 2 Canadian "Rogers LTE" Editiion: SGH-I727R.
I was trying to Root the phone with Odin but now am stuck on a black screen with a yellow triangle and a message"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
Kies cannot see the phone and I cannot go into any other mode, anything I do goes back to the same screen. I did a lot of reading but couldnt get to anything cause I cant go into recovery or even download mode. I would really appreciate some help if possible. If this is in the wrong section please move to where it should be.
Did you try to flash international (GT-I9100) firmware? This firmware isnt compatible with the GS2 LTE from Rogers. If you can still get into download mode or recovery mode you may be able to flash correct firmware and recover your phone though I don't know if its available yet, if you cant get to either download or recovery mode you may be forced to send it to Samsung for repairs which likely wont be free since you have voided the warranty.
Sent from my GT-I9100 using XDA App
www.golazo.ca said:
I just got a SGS 2 Canadian "Rogers LTE" Editiion: SGH-I727R.
I was trying to Root the phone with Odin but now am stuck on a black screen with a yellow triangle and a message"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
Kies cannot see the phone and I cannot go into any other mode, anything I do goes back to the same screen. I did a lot of reading but couldnt get to anything cause I cant go into recovery or even download mode. I would really appreciate some help if possible. If this is in the wrong section please move to where it should be.
Click to expand...
Click to collapse
You should be able to connect the phone to Odin while you have the Yellow Triangle on screen.
Odia.
Odia said:
You should be able to connect the phone to Odin while you have the Yellow Triangle on screen.
Odia.
Click to expand...
Click to collapse
What do I load on the phone if Odin can connect? There is nothing on the phone yet, I just trying my first file.
www.golazo.ca said:
I just got a SGS 2 Canadian "Rogers LTE" Editiion: SGH-I727R.
Click to expand...
Click to collapse
You're in the wrong forum, the i9100 has nothing in common with your phone and i hope you didn't try to flash any of the i9100 stuff. Maybe the att i777 has more in common with your phone, best to browse their section rather than ours.
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
rajukhadka19782 said:
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
Click to expand...
Click to collapse
You must use ODIN
go to download mode then flash your rom
rajukhadka19782 said:
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
Click to expand...
Click to collapse
i have same problem after i install app from google play try to flash rom can,t find 1 that work
plz help.
you need to use odin to flash the stock firmware back going into download mode and for rom just visit - http://www.sammobile.com/ and download firmware from there just see you model and select you country and download latest stock rom and flash it or else tell me your model number and country i will provide you link
AmGaD-SaLaH said:
You must use ODIN
go to download mode then flash your rom
Click to expand...
Click to collapse
Thanks dude for the suggestion.
me 2
Me 2, I want to unbrick it how to download my firmware?
Galaxy Grand Prime SM-G530/H/DV is Not accepting ODIN connection
Galaxy Grand Prime SM-G530/H/DV
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
maq66 said:
Galaxy Grand Prime SM-G530/H/DV
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
Click to expand...
Click to collapse
Seems like the EFS partition is broken (IMEI Invalid)
If You don't have any backups done by custom recovery, well... You're probably done.
I am having a similar problem. After enabling KNOX, which I thought was just another antivirus, my phone rebooted, and just got stuck. It would go to the boot page, with the name, and then it would act like it was gonna go to my home screen, but the screen would go black and it would start over. I cleared the cache and factory wiped it, but still no luck. I didn't enable usb debugging, and from what I know there is no way to enable it. I need it to use odin to flash a rom and start over. any suggestions?
dineshjumani said:
you need to use odin to flash the stock firmware back going into download mode and for rom just visit - http://www.sammobile.com/ and download firmware from there just see you model and select you country and download latest stock rom and flash it or else tell me your model number and country i will provide you link
Click to expand...
Click to collapse
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
talvigi said:
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
Click to expand...
Click to collapse
I'm with the same problem! All solutions need to go to download or recovery mode, but I can't turn on my phone and Odin can't catch it! Please, could somebody help me?
Thanks!
lucas13garcia said:
I'm with the same problem! All solutions need to go to download or recovery mode, but I can't turn on my phone and Odin can't catch it! Please, could somebody help me?
Thanks!
Click to expand...
Click to collapse
Does your device start at all or not? if it starts tell me what do you see? Is the battery charged, anden have you tried Odin 1.87, and have you tired to flash repair firmware 4.4.4, please Try it and make sure to only flash BL file first.
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Does your device start at all or not? if it starts tell me what do you see? Is the battery charged, anden have you tried Odin 1.87, and have you tired to flash repair firmware 4.4.4, please Try it and make sure to only flash BL file first.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Hey, thank you for the help!
It starts and it doesn't! With the battery, after I try to turn on, it keeps blinking repeatedly and stops only if I remove the battery. And my issue with any fix that I try to flash is that the computer doesn't recognize, probably cuz the blinking blue light is just a random light and not the phone actually trying to turn on... so Odin, for example, doesn't catch any device!
Is there any way to make the computer recognize it? I already tried some usb drivers, but nothing so far... BTW, I have a windows 10.
Thanks!
lucas13garcia said:
Hey, thank you for the help!
It starts and it doesn't! With the battery, after I try to turn on, it keeps blinking repeatedly and stops only if I remove the battery. And my issue with any fix that I try to flash is that the computer doesn't recognize, probably cuz the blinking blue light is just a random light and not the phone actually trying to turn on... so Odin, for example, doesn't catch any device!
Is there any way to make the computer recognize it? I already tried some usb drivers, but nothing so far... BTW, I have a windows 10.
Thanks!
Click to expand...
Click to collapse
Well Windows 10 64bit has been creating problems for many many people in the forum and I have seen people running vm and win 7 for the best results. And something very important I must say is that, most of the new computers do have USB 2.0 ports but they are limited in number, so you should find one on ur PC, to us it specifically for phone tweaking softwares. I would suggest you find another PC or laptop around,
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
Click to expand...
Click to collapse
Without recovery or Download mode, you'll need to take it to someone with a black box or jtag.
If you can access a working phone of your same model, you can boot download mode from sd
http://forum.xda-developers.com/grand-prime/development/fix-g530-debrick-img-guide-to-make-t3422115
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
mrunank said:
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
Click to expand...
Click to collapse
What happens when you go to download mode?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
mrunank said:
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
Click to expand...
Click to collapse
Did you try wiping cache and what is your model?
waleeds1 said:
What happens when you go to download mode?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
Did you try wiping cache and what is your model?
Click to expand...
Click to collapse
My model is SM530H I cannot enter the recovery mode to wipe the cache . When I try to go into the recovery mode, samsung logo flashes and then the screen goes blank. Same thing happens when i try to normally switch on the phone
mrunank said:
My model is SM530H I cannot enter the recovery mode to wipe the cache . When I try to go into the recovery mode, samsung logo flashes and then the screen goes blank. Same thing happens when i try to normally switch on the phone
Click to expand...
Click to collapse
What about download mode? Btw it should not go to logo it should go to recovery after bootimage. You should hold down power home and volume down untill download mode comes or power home and volume up untill recovery menu comes
Hello everyone.
First ouf all. Please exuse my bad english.
Im desperately need help to solve my problem.
Two days a go, my note 3 9005 go down alone, it wont boot, no download mode, no recovery mode, even if i connect with pc. I try to use adb but it not reconize him. No matter the method i use to just enter the download mode. It not succed. It show me only the two screen as below. UDC START. POWER RESET. no matter what i did.
Someone please can assist me. Any kind of help will be much appreciated.*
Thanks to all.
Still nobody. Please my phone is still down. Please:crying:
clark android said:
Still nobody. Please my phone is still down. Please:crying:
Click to expand...
Click to collapse
Flash stock Rom with odin...
rayman95 said:
Flash stock Rom with odin...
Click to expand...
Click to collapse
I can't. As i mentioned earlier. There is no download mode.
No one :crying::crying:
You require a service centre
Hi, i want to fix a phone of my friend by flashing it with odin, but things go wrong, the phone after failing wont start or respond to any button, i dont know what to do, please any help would be appreciated
Samsung Galaxy J1 SM-J100H
Edit:
Thanks xEmre66 for your reply, unfortunately no, i think i break the boot image, the phone wont boot on download mode even if i use 300k jig, i think the only solution is to use an sd card filled with the boot image, but i dont find in website a solution like that.
I tryed many solution but no one work, please if someone have the some problem tell me.
Can you get into the DownloadMode? (ODIN MODE)???
Sent from my SM-J100H using XDA-Developers mobile app
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
I have this phone but it is not my main phone but maybe I can help you.
Sent from my SM-J100H using XDA-Developers mobile app
i'm working on this problem..
i resolved,
share there
OSKCHAST said:
i resolved,
share there
Click to expand...
Click to collapse
Please can you share the solution ?, i cant fix the phone.
same problem here
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
caseres84 said:
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
Click to expand...
Click to collapse
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
xEmre66 said:
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
Click to expand...
Click to collapse
same in here. I flash original rom from sam mobile site and my samsung sm-j100h is bricked now. i flash using odin and everthing was ok and it was pass. but nothing happend later on, screen remains black and I don't know what to do.
or atleast tell me can I get somehow all data stored on phone, if yes how to do it
guys still nothing???
same problem guys i bricked the phone 2 days ago with the original firmware from sam mobile u.u i put my samusung j1 in download mode and with odin i done the reflash odin it was green and said me passed but then when i tried to turn on the phone nothing happened my phone is died hard bricked is there a guys something to do to repair him?
i got the same problem..
the phone was completely DEAD after i followed all the instructions here => https://www.youtube.com/watch?v=1T9fxno2s68
Please somebody help us..
Here's my thread => http://forum.xda-developers.com/android/help/help-sm-j100h-dead-power-flash-t3511894
Thank you very much..
im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance
Gal J1 of sadness.... but still hoping
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Chrisjopett said:
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Click to expand...
Click to collapse
PM me pls and tell me how you flashed it etc.
Help
I have same problem,hard brick.Can anyone help?
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
kkq29 said:
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
Click to expand...
Click to collapse
Can you get into Odin Mode? If yes, flash the stock firmware of your region (here is a fast server which provides very fast downloads: fw.updato.com) If no, then you should change your battery as you're saying "it came from my battery" and try the first step again.
If it doesn't help as expected, then your phone is hard bricked and can't be repaired at all. The only solution would be changing the motherboard, but I would not waste my money on a low-end device motherboard and I would directly buy a new phone. :/
Regards,
xEmre66
If I am correct...
Then SM-J110H have Spreadtrum SC7727S
Here is Pinout for Direct eMMC...
https://postimg.cc/image/ul680l5jv/
This Pinout seems also to work with:
Code:
SM-G318HZ
SM-Z130H
I have leaked SM-Z130H PDF... where Instruction is inside to repair with tweezer... USB cable + Spreadtrum Tool:
Code:
[B]ResearchDownload[/B]
In theory something similar should be possible with SM-J110H...
I have at the moment only 1 problem... to create PAC file...
No idea from where I can get:
Code:
FDL1
FDL2
Best Regards
Edit 1.
Sorry, seems I was drunken...
It is sooo hard to find Posts or Threads about SM-J110H...
But it seems SM-J100H also Spreadtrum device...
xEmre66 said:
PM me pls and tell me how you flashed it etc.
Click to expand...
Click to collapse
PM me too please
My teacher phone has a same problem, hehehe.
same problem here. my phone got stuck up with samsung logo then i just dowloaded a firmware on sammobile and i flash it via odin at first it passed then my phone did'nt turn on anymore.
J100H / DD Finding Deadboot solution
Hi ... guys me too having this sort of problem and i found bad about samsung using 32bit - Spreadtrum SC8830A EMMC chipset here
Fix solution Not Found still! if i done i will tell you!
on = SM-J100H/DD --- corp =samsung yateley, uk
ok friend iam searching for Solution for 3days bt i found none= with a clue
It is J100H on serial port= SPRD U2S Daig (ComXX) usb says= SPRD COM Emumerator
this means - all sprd flashing been done on this 2 port only - in Miracle Box it says -
Scanning USB Serial port...
SU2Serial Port: COM64
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot19...
>>BootLoad Error. ID: 1
so my option is if we build a sprdp.bin and flash in AP(PDA) it will boot to Download mode
and dont ask me where is that file i dont no - if any one can provide a real backup pit.pit file
via phone to me i can find something and let u know it. Only from a alive phone J100H/DD
plz friends i need help any dumps or pit. and if any one has a alive J100H/DD please tell me.!
so i can get some help from u --If you wish to help