Sorry for creating another new post but having a nightmare, I have had an android unit installed for less than a week and tonight it has got stuck on the logo and won't boot
its this model https://www.ebay.co.uk/itm/384770479698 brogotek android 11 it was working perfectly well (apart from not remembering position of music tracks) I had been out and about driving most of the day (around 15 stop/starts if that makes any difference) up until around 6.30pm GMT and booted up fine everytime until then. I understand the unit is rooted as I guess most chinese type units are, then around 8pm I got in and it would not boot
It powers on to the logo screen but will not go any further and the lights on the buttons do not illuminate when i put the headlights on the journey was around 15 mins and it did not move beyond this screen, tried reset button, and press and hold reset button for over a minute
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After a bit of trial and error I managed to get into the recovery mode or at least I think it was, Power on and repeatedly tap on power button, I got the word "detected" in green and then I got this "
So it seems there are no recovery files, it did come with a usb drive in the box but nothing on it, I checked on a partition manager and this was the result
I have no idea what the unallocated space is but tried it in both usb ports on the unit and still getting the no update udisk or files message so can only conclude there is just nothing on it.
I have messaged the seller as it has 12 months warranty but can anyone help, could I get a rom even if its just a bog standard android rom to get it running??
Please help
Well kudos to brosmartek customer support, they have sent me some recovery files and I am now back up and running, took less than 10 mins
If not correctly installed, firmware can cause problems. Your device is
MTK8667 Octa-core based Android 11
Try searching or ask your vendor for update firmware for your device MTK 8667
Anton TNT said:
If not correctly installed, firmware can cause problems. Your device is
MTK8667 Octa-core based Android 11
Try searching or ask your vendor for update firmware for your device MTK 8667
Click to expand...
Click to collapse
Brosmartek have sent me their official files, just needed to unzip onto root of a USB drive, plug it in and reset into recovery mode, it worked a charm, reset to factory settings and working great
Hello,
I have exactly the same problem. The screen is stuck, I cannot enter any recovery mode and if I tap on the screen there appears the same message: "no find update udisk or files. please check"
How did you enter the recovery mode?
Spider! said:
Hello,
I have exactly the same problem. The screen is stuck, I cannot enter any recovery mode and if I tap on the screen there appears the same message: "no find update udisk or files. please check"
How did you enter the recovery mode?
View attachment 5660041
Click to expand...
Click to collapse
Hi
Looks like exactly the same issue I had
I contacted the manufacturers(brogotek) on the ebay sales page and they sent me a link to download recovery files.
I downloaded and extracted them to the root of a usb drive, plugged in and reset the unit and it recovered
robfox1975 said:
Hi
Looks like exactly the same issue I had
I contacted the manufacturers(brogotek) on the ebay sales page and they sent me a link to download recovery files.
I downloaded and extracted them to the root of a usb drive, plugged in and reset the unit and it recovered
Click to expand...
Click to collapse
Maybe you could share the link here to help others to leave the nightmare you had?
TorstenH said:
Maybe you could share the link here to help others to leave the nightmare you had?
Click to expand...
Click to collapse
LINK
https://we.tl/t-UeDC40i6Ul
Please be aware this was sent for a brosmartek android 11 MTK8667 unit, I have no idea if it will work for other units but I hope it does work for you
file must be extracted to root of usb drive, and all files and setting that were on your unit will be lost
Power on unit, press reset button during power up and it might recognise the files and update, if it doesn't find the files automatically, then rest again and do whatever you did to get the screen you posted above
Good luck
Related
So after trying to backup everything in recovery and flash PACMAN ROM for my phone, everything seemed fine, until it rebooted... When the LG logo appeared, suddenly weird horizontal lines started going across my screen and suddenly the edges of the phone started greying until the whole phone started going greyish-white, then powered off. I tried rebooting several times, and eventually it just wouldn't boot at all. If I hild the power button, it vibrates for a sec and nothing. When I plugged it into my PC, I can access it like a USB storage drive and my internal storage is still there, but I can figure out how to fix my phone. Did my screen die? Is there a way I can recover my phone from my PC via USB?
BlackGuyRX said:
So after trying to backup everything in recovery and flash PACMAN ROM for my phone, everything seemed fine, until it rebooted... When the LG logo appeared, suddenly weird horizontal lines started going across my screen and suddenly the edges of the phone started greying until the whole phone started going greyish-white, then powered off. I tried rebooting several times, and eventually it just wouldn't boot at all. If I hild the power button, it vibrates for a sec and nothing. When I plugged it into my PC, I can access it like a USB storage drive and my internal storage is still there, but I can figure out how to fix my phone. Did my screen die? Is there a way I can recover my phone from my PC via USB?
Click to expand...
Click to collapse
Back up your internal storage to your pc, more importantly the nandroid which is in the TWRP folder. Then follow this guide to get your phone back to stock.
I think that rom is kk u can find more info about that problem in liquidsmoth thread please tell me if fix it if not that mean how I know maybe u need to replace something in motherboard
Art is right. Follow the guide to get back to stock. If that doesn't work then it's a hardware problem.
Looks like I'm never trying the pacman rom on the g2...
Ok update. After following the steps in that guide posted, the firmware loaded and the AT&T boot screen popped up after reboot, though now LG Flash Tool is still doing it's thing and the screen's off with the phone still in USB and power light slowly blinking red, so I have no idea if it's fine or not.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Alright, it turns out it completed the installation and I just had to unplug it, it now works! I just want to know of which custom ROM to go with now.
BlackGuyRX said:
Alright, it turns out it completed the installation and I just had to unplug it, it now works! I just want to know of which custom ROM to go with now.
Click to expand...
Click to collapse
Check the index in my signature, the roms are organised by android version and variant
Art Vanderlay said:
Check the index in my signature, the roms are organised by android version and variant
Click to expand...
Click to collapse
Well, you deserve the Thanks, mate! Maybe he/she is still new here.
raravi said:
Well, you deserve the Thanks, mate! Maybe he/she is still new here.
Click to expand...
Click to collapse
Cheers raravi. I assume it's a guy, as his name is Blackguy lol.
BlackGuyRX said:
Alright, it turns out it completed the installation and I just had to unplug it, it now works! I just want to know of which custom ROM to go with now.
Click to expand...
Click to collapse
Why dont you serach your requirements in D-802 section. I mean what are doing here bud.
http://forum.xda-developers.com/lg-g2/development-d802
Hi.
I tried to update my mother in law Huawei p8 lite,phone in settings showed there is a firmaware update available,so I done a backup then download via wifi android 6.0,after download complete its asked me to procced so i click to yes,phone restart to upgrade mode but was stuck on 0% progress for very long time so I tried to restart the phone via power off button but after that phone doesnt start again any more.
So I readed a lot what to do but nothing work for me.
I download android 6.0 to pc then copy dload folder to sd card,then when card in phone I pressed volume + and - and power the same time but nothing happend,phone just vibrate once for very short time and nothing.
I tried also using adb procedure but phone is not recognized in my laptop with windows 8,all drivers installed I believe,I have mined all internet for proper drivers,all adb and fastboot drivers installed,included huawei drivers and HiSuite softaware and even Handset WinDriver installed and windows 8 only seen device like on picture below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I plugged phone to laptop via usb cable,short vibrate and nothing,so I press power off and volume down same time and laptop see something but not properly,please check below:
ADB not seen any adb device after command "adb devices" .
I can manulally choose driver for that like e.g ADB interface device but ADB still not see anything.
Tried also with disconnected battery couse read on this forum its help sometimes but nothing,still same.
After doing all that just realize sometimes red led blinking so its mean battery is down,and wont charge via usb on the phone,so I charged battery via external charger connected straight to the wires on battery,now red led not blinking.
Tried also on another laptop with windows xp,same ,nothing happend,adb not see anything,but sometimes in device manager phone is recognized as below:
On other forum when is recognized like that its possible to fix but need special usb box,which I ovcourse dont have.
What else I can try?
Summary:
phone not recognized in laptop,even with unplugged battery
phone wont start,no logo nothing
wont update from sd card wiht dload
is it totally brick?
pls help/
Hi!
i think your phone board was damage in process, happened to me on a Alcatel Idol... The same thing. I think the phone was already a bit laggi, no?
.
Phone was not worked properly,thats what my mother in law said.
Its sometimes show just white screen after unlock,or camera wont switch on.
And battery draining fast.I thought firmware upgrade will fix it but its brick now(
Update:I have fixed the phone with dc phoenix software-Installed new board firmware and then stock rom and its all ok now.
alsat1 said:
Update:I have fixed the phone with dc phoenix software-Installed new board firmware and then stock rom and its all ok now.
Click to expand...
Click to collapse
It would be useful if you did a little tutorial with links.
Thank you
MARCOSOFT said:
It would be useful if you did a little tutorial with links.
Thank you
Click to expand...
Click to collapse
I found informations and tutorial on xda forum so its all here
alsat1 said:
I found informations and tutorial on xda forum so its all here
Click to expand...
Click to collapse
Did you have to pay for the phoenix software?
MARCOSOFT said:
Did you have to pay for the phoenix software?
Click to expand...
Click to collapse
Yes 15 euro for 72hours.
Hello everyone,
I did something stupid I think .
To begin with:
A few days ago I installed the Lite firmware from Malaysk for the PX6 STM32: Link . Everything went fine until...
Today I installed my reverse camera, and I noticed that there where some issues, so I tought to restore the firmware back to the stock firmware with the one I found here: Link .
Name of the firmware:KC1E0110-P01-1.1.4.3.1_20200323_160300.
I've downloaded the firmware and put it on a USB stick (formatted to FAT32), the unit recognized the update and I clicked on the arrow to update the device..... After that the Unit rebooted and the startup (Opel) logo appeared. After that it goes to a black screen. I've waited and waited, but nothing happend. :crying:
I't goes to the Boot screen (Opel Logo) and continue's to a black screen. I also tried to enter recovery mode, but without any chance. There is also not so much information available for the PX6 Eunavi/Bosion radio's.
I've uploaded a video to Youtube, concerning this problem: https://www.youtube.com/watch?v=GQav_5BJWxI
What I tried so far:
Press the reset button
Update the original firmware by using the SDDiskTool and the firmware file found here: https://yadi.sk/d/IcibzBqDuAEh5Q but no result. It seems that it reacts on the GPS SD card slot by giving a distorted image.
Before I try to put the radio in Maskrom mode, this is my last hope.
Please can someone help me further, I also contacted Eunavi for support.
Thanks in advance!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update 03-07-2020:
- Tried it again by disconnecting the battery from the car, but with no result.
- Flashed the recovery file through the rockhip Rockchip Create Upgrade Disk Tool v1.53 on a normal FAT32 USB. Nothing happends.
- It seems that only the GPS SD CARD slot is responding with booting up from SD. When i put the micro SD card in the GPS Slot and boot up the device, it gives a distorted screen.
- I also contacted Bosion and Eunavi, Bosion is responding but doesn't want to help me with how to enter the recovery mode.
Bosion confirms that Eunavi is just a reseller of these units. I advice people the next time to buy directly from Bosion. They are responding fast.
just connect a keyboard on BACK SIDE USB it is important front side doesnt work connect via backside usb press ctrl+alt+del device will restart than rapidly pres i key while holding alt + printscreen pray god for me
or just reflash the firmware
PX6 RK3399 STM32 Android 10 Head Unit user q&a
My device: RK3399 STM32 Android 10 Head Unit with DSP I've installed Magisk v22.0 via this guide: https://forum.xda-developers.com/t/root-for-android-10-px6-mtce.4134041/ After using in app install function my device restarted but never came up...
forum.xda-developers.com
Heres the problem I started getting after I took the update from Magisk this morning. I did the update through Magisk app using their recommended method of flashing it I believe and I think thats how the problems started.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it just boot loops now with that message over and over again. On top of that error I am unable to boot into Download Mode or Recovery, I get this when I try to:
Any one have any ideas on how to fix this, I'm all ears. Thanks for the help
arksoother said:
Heres the problem I started getting after I took the update from Magisk this morning. I did the update through Magisk app using their recommended method of flashing it I believe and I think thats how the problems started.
it just boot loops now with that message over and over again. On top of that error I am unable to boot into Download Mode or Recovery, I get this when I try to:
Any one have any ideas on how to fix this, I'm all ears. Thanks for the help
Click to expand...
Click to collapse
Try flashing Mr. Bump linked here -> https://forum.xda-developers.com/showpost.php?p=68638985&postcount=54
rahimali said:
Try flashing Mr. Bump linked here -> https://forum.xda-developers.com/showpost.php?p=68638985&postcount=54
Click to expand...
Click to collapse
So here's the problem with doing this, I have no way of flashing Mr.Bump at the moment with the stupid tablet looping like it is. When I plug in the tablet I don't get the bepoop from my laptop telling me its plugged in and ready to go unless I press the power button and volume down. But then I get what the second picture showed, at that point then the pc does the bepoop sound but I still can't do anything with the tablet. So I guess my next question is how do I flash or use this with the state my tablets in? Thanks.
arksoother said:
So here's the problem with doing this, I have no way of flashing Mr.Bump at the moment with the stupid tablet looping like it is. When I plug in the tablet I don't get the bepoop from my laptop telling me its plugged in and ready to go unless I press the power button and volume down. But then I get what the second picture showed, at that point then the pc does the bepoop sound but I still can't do anything with the tablet. So I guess my next question is how do I flash or use this with the state my tablets in? Thanks.
Click to expand...
Click to collapse
Can you not even boot into bootloader/fastboot or TWRP/recovery?
You should be able to boot to recovery by following the steps shown here -> https://www.hardreset.info/devices/lg/lg-lk430-g-pad-f-70/recovery-mode/
You could also try and boot into safe mode and try and use the magisk manager to uninstall magisk - howto here -> https://www.hardreset.info/devices/lg/lg-lk430-g-pad-f-70/safe-mode/
okay update, so if you look at the fsecond picture it says fastboot_init() I assume this means its initialised? I have no idea what any of the stuff below that means. when I do the recovery mode it shows the words recovery for like a second then gives me the black screen with white text that you see in picture 2. when I try the other method all the tablet does is bootloop with a new error code of 2250 I think. So I have know idea whats going on with this. I'll try uninstalling Magisk like you said but things are looking bleak I feel?
arksoother said:
okay update, so if you look at the fsecond picture it says fastboot_init() I assume this means its initialised? I have no idea what any of the stuff below that means. when I do the recovery mode it shows the words recovery for like a second then gives me the black screen with white text that you see in picture 2. when I try the other method all the tablet does is bootloop with a new error code of 2250 I think. So I have know idea whats going on with this. I'll try uninstalling Magisk like you said but things are looking bleak I feel?
Click to expand...
Click to collapse
somebody else apparently had the same experience although on a different LG device -> https://forum.xda-developers.com/lg-spirit/help/help-fastboot-error-loading-keystore-t3430163
So it seems that fastboot commands may have been disabled which means you can't interact with the device in fastboot mode whatever you do.
If nothing else works, you could try and re-flash stock ROM if you can manage to get into download mode.
Best of luck!
Hey y'all. I tried updating my PX5 (I had the latest HZC mcu installed) 6.0.1 to android 8.0 using this guide
After booting into recovery, I tried to select the update.img file through the SD card but nothing happened.
After nearly giving up, I decided to try the same thing using USB drive. I was able to select the img file, they screen showed a few lines of text and just instantly turned off.
I tried to boot it, enter recovery mode or what not but nothing happened.
If I hold the RST button for 10s~ the non-phsyical side buttons blink for 5s, but nothing happens. I was not able to return back to the recovery mode.
Is there anything to do to solve this? My PX5 has 1 USB slot and 1 TF slot. I assume it does not have GPS sd slot so that's why the file could not be read, and either I had a corrupted file on my USB drive or it's just impossible to do through USB and it bricked my device.
I would appreciate any help with solving this brick, It was a mistake trying to upgrade from the first place..
If there is nothing to do, i'll just go and buy a new head unit, I wanted to upgrade because it lacked some features and the UI was very simple and outdated.
I don't have a photo of the MCU, but i had the MTCE_HZC_2.94b installed from here: https://disk.yandex.ru/d/umCvHqCDzHccr
I also downloaded the update files from here, following the guide above.
Before updating the MCU, I had the MTCE_HZC_2.74 installed by stock. The MCU update worked well, the android upgrade failed utterly.
Now the unit won't turn on at all and there is a black screen. long pressing the RST button until the side buttons blink does not boot the device into recovery. seems like even recovery got corrupted somehow.
After some research, I found out that I can use OTG cable to flash the firmware and recovery using a PC.
Will I be able to flash android 8-10 directly instead of flashing the android 6? or I'd have to flash directly android 6?
If so, where can I get the frimware/img file i'll need to flash?
EDIT:
I tried to connect the system to a laptop using USB A to A cable but the rockchip tool did not recognize it..
any other ways or the unit is lost?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}