So after trying to backup everything in recovery and flash PACMAN ROM for my phone, everything seemed fine, until it rebooted... When the LG logo appeared, suddenly weird horizontal lines started going across my screen and suddenly the edges of the phone started greying until the whole phone started going greyish-white, then powered off. I tried rebooting several times, and eventually it just wouldn't boot at all. If I hild the power button, it vibrates for a sec and nothing. When I plugged it into my PC, I can access it like a USB storage drive and my internal storage is still there, but I can figure out how to fix my phone. Did my screen die? Is there a way I can recover my phone from my PC via USB?
BlackGuyRX said:
So after trying to backup everything in recovery and flash PACMAN ROM for my phone, everything seemed fine, until it rebooted... When the LG logo appeared, suddenly weird horizontal lines started going across my screen and suddenly the edges of the phone started greying until the whole phone started going greyish-white, then powered off. I tried rebooting several times, and eventually it just wouldn't boot at all. If I hild the power button, it vibrates for a sec and nothing. When I plugged it into my PC, I can access it like a USB storage drive and my internal storage is still there, but I can figure out how to fix my phone. Did my screen die? Is there a way I can recover my phone from my PC via USB?
Click to expand...
Click to collapse
Back up your internal storage to your pc, more importantly the nandroid which is in the TWRP folder. Then follow this guide to get your phone back to stock.
I think that rom is kk u can find more info about that problem in liquidsmoth thread please tell me if fix it if not that mean how I know maybe u need to replace something in motherboard
Art is right. Follow the guide to get back to stock. If that doesn't work then it's a hardware problem.
Looks like I'm never trying the pacman rom on the g2...
Ok update. After following the steps in that guide posted, the firmware loaded and the AT&T boot screen popped up after reboot, though now LG Flash Tool is still doing it's thing and the screen's off with the phone still in USB and power light slowly blinking red, so I have no idea if it's fine or not.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Alright, it turns out it completed the installation and I just had to unplug it, it now works! I just want to know of which custom ROM to go with now.
BlackGuyRX said:
Alright, it turns out it completed the installation and I just had to unplug it, it now works! I just want to know of which custom ROM to go with now.
Click to expand...
Click to collapse
Check the index in my signature, the roms are organised by android version and variant
Art Vanderlay said:
Check the index in my signature, the roms are organised by android version and variant
Click to expand...
Click to collapse
Well, you deserve the Thanks, mate! Maybe he/she is still new here.
raravi said:
Well, you deserve the Thanks, mate! Maybe he/she is still new here.
Click to expand...
Click to collapse
Cheers raravi. I assume it's a guy, as his name is Blackguy lol.
BlackGuyRX said:
Alright, it turns out it completed the installation and I just had to unplug it, it now works! I just want to know of which custom ROM to go with now.
Click to expand...
Click to collapse
Why dont you serach your requirements in D-802 section. I mean what are doing here bud.
http://forum.xda-developers.com/lg-g2/development-d802
Related
After several attempts trying to apply Lag Fix, my phone ended up doing endless boot loops and due to my ROMs being on the SD Card instead of Internal SD, I could not flash it and seem to not have access to somehow get the ROM file from External to Internal SD. I then tried to restore the Stock ROM through Odin and it failed miserably, with several stalls that eventually led to the screen shown below. This screen stays on when I press the power button and nothing else seems to work. Removing SIM and SD Cards also did nothing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I got it past that by plugging in the USB cable and getting into download mode with Power/Vol+/-. However, I can not get anything to flash via ODIN once connected. ODIN does recognize the device on port 6 but once I select the stock files nothing appears to happen from there. ODIN just sits there. I went on a walk at the boardwalk to see if I just needed to give it more time but it was on the same screen. If I flash a kernal it sits at zImage, and if I flash a ROM it sits at cache.rfs
Regards,
B
vibrantFTW said:
I got it past that by plugging in the USB cable and getting into download mode with Power/Vol+/-. However, I can not get anything to flash via ODIN once connected. ODIN does recognize the device on port 6 but once I select the stock files nothing appears to happen from there. ODIN just sits there. I went on a walk at the boardwalk to see if I just needed to give it more time but it was on the same screen. If I flash a kernal it sits at zImage, and if I flash a ROM it sits at cache.rfs
Regards,
B
Click to expand...
Click to collapse
if you can get to download mode just keep trying to flash with odin. I think some mentioned loading the files before you plug in the usb cable.
I am in download but still no progress. I've tried a lot of times and it just sticks at cache.rfs. I think its a total brick. ODIN **** out on my when I was flashing JAC's kernal. Can't get anything since then....
Regards,
B
OMG I finally got it. I had to leave ODIN open after it stuck at file analysis. I then took out the battery of the phone and put it back into download mode. I click start in ODIN and thankfully... she's flashing back to stock 2.1. I had tried a million different ways... ODIN is not exceptionally stable. No bueno. I think I'm going to keep the stock Kernal cause this was scary... lol.
Click to expand...
Click to collapse
I just fixed it a few minutes ago. I'm just quoting myself above.
Regards,
B
My phone is back working as well. Just kept at trying to get to download mode and it eventually went through.
have you tried system Emergency Recovery in kies?
jkcheng122 said:
My phone is back working as well. Just kept at trying to get to download mode and it eventually went through.
Click to expand...
Click to collapse
A word to the wise put your rom on the internal sd card. Glad you got it working
Hello all,
I'm in a jam here and hoping one of you can help me out.
The power button on my Moto X Pure Edition, which is not rooted, has stopped working completely. The battery died overnight and, obviously, the phone powered off. Now I can't turn it back on. I'd like to get it turned on or at least get my personal data off of it. Does anyone have any ideas?
I have figured out how to get it into AP Fastboot Flash Mode by holding down the Volume Up & Volume Down buttons simultaneously while plugging it into a power source. But, I cannot select "START" (or anything else) from Fastboot because my power button doesn't work.
Hoping I can figure out how to do this without taking apart the phone, which will void my warranty and probably won't result in me being able to fix it anyway.
Thanks so much for your help!
lowbar said:
Hello all,
I'm in a jam here and hoping one of you can help me out.
The power button on my Moto X Pure Edition, which is not rooted, has stopped working completely. The battery died overnight and, obviously, the phone powered off. Now I can't turn it back on. I'd like to get it turned on or at least get my personal data off of it. Does anyone have any ideas?
I have figured out how to get it into AP Fastboot Flash Mode by holding down the Volume Up & Volume Down buttons simultaneously while plugging it into a power source. But, I cannot select "START" (or anything else) from Fastboot because my power button doesn't work.
Hoping I can figure out how to do this without taking apart the phone, which will void my warranty and probably won't result in me being able to fix it anyway.
Thanks so much for your help!
Click to expand...
Click to collapse
Do you have fastboot installed on your computer? If you do then issue the following command : fastboot reboot
Your phone will now start up.
If you don't, install it. You will have to research how to do it for your system. I'm on Arch Linux, so won't know how to help you, but there will be a google guide.
sr.perro said:
Do you have fastboot installed on your computer? If you do then issue the following command : fastboot reboot
Your phone will now start up.
If you don't, install it. You will have to research how to do it for your system. I'm on Arch Linux, so won't know how to help you, but there will be a google guide.
Click to expand...
Click to collapse
Thank you for the suggestion. Got fastboot installed (used this: http://forum.xda-developers.com/showthread.php?p=48915118#post48915118) but it doesn't appear to be recognizing my device. See attached image. Still working on it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
lowbar said:
Thank you for the suggestion. Got fastboot installed (used this: http://forum.xda-developers.com/showthread.php?p=48915118#post48915118) but it doesn't appear to be recognizing my device. See attached image. Still working on it.
Click to expand...
Click to collapse
Hilarious. After an hour of fumbling around I figured out the USB port I had the phone plugged into was bad. Plugged it into one on the other side of the computer, recognized, rebooted, good to go.
Thanks so much for your help.
lowbar said:
Hilarious. After an hour of fumbling around I figured out the USB port I had the phone plugged into was bad. Plugged it into one on the other side of the computer, recognized, rebooted, good to go.
Thanks so much for your help.
Click to expand...
Click to collapse
Glad you sorted it.
sr.perro said:
Glad you sorted it.
Click to expand...
Click to collapse
hey man. Im having the same issue with my phone, but no matter what i do my pc still wont detect my phone. i don tknow what to do please help.
Hi.
I tried to update my mother in law Huawei p8 lite,phone in settings showed there is a firmaware update available,so I done a backup then download via wifi android 6.0,after download complete its asked me to procced so i click to yes,phone restart to upgrade mode but was stuck on 0% progress for very long time so I tried to restart the phone via power off button but after that phone doesnt start again any more.
So I readed a lot what to do but nothing work for me.
I download android 6.0 to pc then copy dload folder to sd card,then when card in phone I pressed volume + and - and power the same time but nothing happend,phone just vibrate once for very short time and nothing.
I tried also using adb procedure but phone is not recognized in my laptop with windows 8,all drivers installed I believe,I have mined all internet for proper drivers,all adb and fastboot drivers installed,included huawei drivers and HiSuite softaware and even Handset WinDriver installed and windows 8 only seen device like on picture below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I plugged phone to laptop via usb cable,short vibrate and nothing,so I press power off and volume down same time and laptop see something but not properly,please check below:
ADB not seen any adb device after command "adb devices" .
I can manulally choose driver for that like e.g ADB interface device but ADB still not see anything.
Tried also with disconnected battery couse read on this forum its help sometimes but nothing,still same.
After doing all that just realize sometimes red led blinking so its mean battery is down,and wont charge via usb on the phone,so I charged battery via external charger connected straight to the wires on battery,now red led not blinking.
Tried also on another laptop with windows xp,same ,nothing happend,adb not see anything,but sometimes in device manager phone is recognized as below:
On other forum when is recognized like that its possible to fix but need special usb box,which I ovcourse dont have.
What else I can try?
Summary:
phone not recognized in laptop,even with unplugged battery
phone wont start,no logo nothing
wont update from sd card wiht dload
is it totally brick?
pls help/
Hi!
i think your phone board was damage in process, happened to me on a Alcatel Idol... The same thing. I think the phone was already a bit laggi, no?
.
Phone was not worked properly,thats what my mother in law said.
Its sometimes show just white screen after unlock,or camera wont switch on.
And battery draining fast.I thought firmware upgrade will fix it but its brick now(
Update:I have fixed the phone with dc phoenix software-Installed new board firmware and then stock rom and its all ok now.
alsat1 said:
Update:I have fixed the phone with dc phoenix software-Installed new board firmware and then stock rom and its all ok now.
Click to expand...
Click to collapse
It would be useful if you did a little tutorial with links.
Thank you
MARCOSOFT said:
It would be useful if you did a little tutorial with links.
Thank you
Click to expand...
Click to collapse
I found informations and tutorial on xda forum so its all here
alsat1 said:
I found informations and tutorial on xda forum so its all here
Click to expand...
Click to collapse
Did you have to pay for the phoenix software?
MARCOSOFT said:
Did you have to pay for the phoenix software?
Click to expand...
Click to collapse
Yes 15 euro for 72hours.
Hello everyone,
I have a big problem and I can't find a solution.
My phone reboots after 20 seconds.
I just see the logo LeEco and 20 seconds after, it restarts continuously. it does not stop.
I can enter in the fastboot but the usb debugging mode is not enabled so I can' t do anything.
Please, what is the solution ?
Thank you very much
naovich said:
Hello everyone,
I have a big problem and I can't find a solution.
My phone reboots after 20 seconds.
I just see the logo LeEco and 20 seconds after, it restarts continuously. it does not stop.
I can enter in the fastboot but the usb debugging mode is not enabled so I can' t do anything.
Please, what is the solution ?
Thank you very much
Click to expand...
Click to collapse
Are you stock?
Sent from my SM-A730F using xda premium
Yes.
I am on the official Rom. I have never installed any other ROMs and I have never flashed the phone.
Thank you for your reply
naovich said:
Yes.
I am on the official Rom. I have never installed any other ROMs and I have never flashed the phone.
Thank you for your reply
Click to expand...
Click to collapse
You can try to do a hard reset I hope does it but it could be hardware issue.
Sent from my SM-A730F using xda premium
The hard reset doesn't work because the phone reboots when I enter to the recovery mode.
Someone told me it may be because I let the phone go to 0%. Do you think it's possible? If that's right, what do you think I can do now?
Thank you
naovich said:
The hard reset doesn't work because the phone reboots when I enter to the recovery mode.
Someone told me it may be because I let the phone go to 0%. Do you think it's possible? If that's right, what do you think I can do now?
Thank you
Click to expand...
Click to collapse
In that case leave it plugged in for a day and then retry reseting. You calibration could be out of whack.
If you are using the Leeco supplied usb C cable, replace it with a higher quality cable.
naovich said:
The hard reset doesn't work because the phone reboots when I enter to the recovery mode.
Someone told me it may be because I let the phone go to 0%. Do you think it's possible? If that's right, what do you think I can do now?
Thank you
Click to expand...
Click to collapse
I am experiencing the exact same thing. So is someone else in another thread.
Completely stock now it's stuck in a boot loop and Recovery mode shows no options at all. Leaving it in Recovery mode leads to a reboot within 2-3 seconds.
Same as like me, i bought from bangggood 6months ago with problem sometimes restart again that ithink the issue from the software and then i try the Rom that iforget,after that hardbrick ohh no,a good news qfil is coming and i happy,even thought my device is turn on but the problem is same my device sometimes restart again,,,yeahhh at least my device is turn on
i try geneys 26s and root
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Genesys 26s Root
Thanks before
me to...somebody pls help me...:crying:
Heres the problem I started getting after I took the update from Magisk this morning. I did the update through Magisk app using their recommended method of flashing it I believe and I think thats how the problems started.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it just boot loops now with that message over and over again. On top of that error I am unable to boot into Download Mode or Recovery, I get this when I try to:
Any one have any ideas on how to fix this, I'm all ears. Thanks for the help
arksoother said:
Heres the problem I started getting after I took the update from Magisk this morning. I did the update through Magisk app using their recommended method of flashing it I believe and I think thats how the problems started.
it just boot loops now with that message over and over again. On top of that error I am unable to boot into Download Mode or Recovery, I get this when I try to:
Any one have any ideas on how to fix this, I'm all ears. Thanks for the help
Click to expand...
Click to collapse
Try flashing Mr. Bump linked here -> https://forum.xda-developers.com/showpost.php?p=68638985&postcount=54
rahimali said:
Try flashing Mr. Bump linked here -> https://forum.xda-developers.com/showpost.php?p=68638985&postcount=54
Click to expand...
Click to collapse
So here's the problem with doing this, I have no way of flashing Mr.Bump at the moment with the stupid tablet looping like it is. When I plug in the tablet I don't get the bepoop from my laptop telling me its plugged in and ready to go unless I press the power button and volume down. But then I get what the second picture showed, at that point then the pc does the bepoop sound but I still can't do anything with the tablet. So I guess my next question is how do I flash or use this with the state my tablets in? Thanks.
arksoother said:
So here's the problem with doing this, I have no way of flashing Mr.Bump at the moment with the stupid tablet looping like it is. When I plug in the tablet I don't get the bepoop from my laptop telling me its plugged in and ready to go unless I press the power button and volume down. But then I get what the second picture showed, at that point then the pc does the bepoop sound but I still can't do anything with the tablet. So I guess my next question is how do I flash or use this with the state my tablets in? Thanks.
Click to expand...
Click to collapse
Can you not even boot into bootloader/fastboot or TWRP/recovery?
You should be able to boot to recovery by following the steps shown here -> https://www.hardreset.info/devices/lg/lg-lk430-g-pad-f-70/recovery-mode/
You could also try and boot into safe mode and try and use the magisk manager to uninstall magisk - howto here -> https://www.hardreset.info/devices/lg/lg-lk430-g-pad-f-70/safe-mode/
okay update, so if you look at the fsecond picture it says fastboot_init() I assume this means its initialised? I have no idea what any of the stuff below that means. when I do the recovery mode it shows the words recovery for like a second then gives me the black screen with white text that you see in picture 2. when I try the other method all the tablet does is bootloop with a new error code of 2250 I think. So I have know idea whats going on with this. I'll try uninstalling Magisk like you said but things are looking bleak I feel?
arksoother said:
okay update, so if you look at the fsecond picture it says fastboot_init() I assume this means its initialised? I have no idea what any of the stuff below that means. when I do the recovery mode it shows the words recovery for like a second then gives me the black screen with white text that you see in picture 2. when I try the other method all the tablet does is bootloop with a new error code of 2250 I think. So I have know idea whats going on with this. I'll try uninstalling Magisk like you said but things are looking bleak I feel?
Click to expand...
Click to collapse
somebody else apparently had the same experience although on a different LG device -> https://forum.xda-developers.com/lg-spirit/help/help-fastboot-error-loading-keystore-t3430163
So it seems that fastboot commands may have been disabled which means you can't interact with the device in fastboot mode whatever you do.
If nothing else works, you could try and re-flash stock ROM if you can manage to get into download mode.
Best of luck!