Database Users

Junsun V1 stock rom to custom rom

Hello, can anyone tell me how can i change the stock rom from the Junsun v1 head unit? Or if anyone please do it for me i will be very appreciated.
The rom is android 10 at least is what's say on the HU.
I need the rom to be rooted at the least.
The link for the stock rom is here:
https://www.dropbox.com/s/ye7gyiwvo...ght=72&_currency=EUR&_lang=pt_PT&fromApp=true
If i broke the rules i am sorry for that.
Cheers
Specs from the unit attached.
https://imgur.com/a/DReoFS0

Malaysk can you help please?

Hi,
the link is dead. Can you upload it again?
Thanks

Here is the link directly from Junsun support service:
https://drive.google.com/drive/fold...imconversation.0.0.517d3e5fXpVMvR&usp=sharing
The FW is for the below configuration:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Info before and after update:

djborsi said:
Here is the link directly from Junsun support service:
https://drive.google.com/drive/fold...imconversation.0.0.517d3e5fXpVMvR&usp=sharing
The FW is for the below configuration:
View attachment 5194463
Info before and after update:
View attachment 5194465
Click to expand...
Click to collapse
Have you seen any changes after install?

I got this FW, because I complained about not working launcher (the apps and widgets could not be pinned to any of home screens).
After flashing it, the issue is still not solved.
The main difference, which I have noticed is the status bar - before was only with shortcut to WiFi and to mobile data (or Bluetooth) , afterwards are few more (brightness, mute, volume, "accelerate", Bluetooth, etc).

djborsi said:
I got this FW, because I complained about not working launcher (the apps and widgets could not be pinned to any of home screens).
After flashing it, the issue is still not solved.
The main difference, which I have noticed is the status bar - before was only with shortcut to WiFi and to mobile data (or Bluetooth) , afterwards are few more (brightness, mute, volume, "accelerate", Bluetooth, etc).
Click to expand...
Click to collapse
Hi, can you kindly send me pictures of the car radio info? i would like to understand if I own the same car radio
i'd like to update the firmware

Feloix-94 said:
Hi, can you kindly send me pictures of the car radio info? i would like to understand if I own the same car radio
i'd like to update the firmware
Click to expand...
Click to collapse
Here you can see mainly info before updating the unit:
https://forum.xda-developers.com/t/...4gb-android-10-headunit.4193061/post-84333939

djborsi said:
Here you can see mainly info before updating the unit:
https://forum.xda-developers.com/t/...4gb-android-10-headunit.4193061/post-84333939
Click to expand...
Click to collapse
Too bad, mine is a junsun v1 MT8227L

Hi, how can I go about installing the update? Is there a guide? Thanks

Feloix-94 said:
Pacat, al meu este un junsun v1 MT8227L
Click to expand...
Click to collapse
Feloix-94
Cred că asta este pentru tine. Aveți linkul pentru a descărca firmware-ul.
(...) https://easyupload.io/uqz0xp

djborsi said:
Here is the link directly from Junsun support service:
https://drive.google.com/drive/fold...imconversation.0.0.517d3e5fXpVMvR&usp=sharing
The FW is for the below configuration:
View attachment 5194463
Info before and after update:
View attachment 5194465
Click to expand...
Click to collapse
dbors, i have the same tablet as you.
(...)Android 10 + RDS for Peugeot 307, 4GB-64GB, WIFI+4G, 8-CORE+DSP
(...)
Is the firmware post by you is Stock ? I want the Factory Version, or I wonder what it was when you bought it.
Excuse my question, I do not have much experience in the field and I better ask than to do something stupid.

Salut, am acest cont de multi ani dar nu l-am folosit. Nu am prea multa experienta in domeniu, sunt adeptul softurilor stock. Am tableta Junsun V1 Pro pentru Peugeot 307 cu urmatoarele Specif. Android 10 + RDS, 4GB-64GB, WIFI + 4G, 8-CORE + DSP si am mare problema cu ea. Nu mai este functioneaza. Se deschide Android dar cred ca am niste fisiere de sistem lipsa si nu mai functioneaza nimic.
(...)

Unfortunately, I didn't get to take pictures on the "Aboute Device" menu before the tablet broke down.
I took some pictures now, that's what it looks like. At MCU: (H) (none)
MDIA: null
See the pictures above.

Sorry in English.
Hi, I have this account for many years but I have not used it. I don't have much experience in the field, I am a fan of stock software. I have the Junsun V1 Pro tablet for Peugeot 307 with the following Specif. Android 10 + RDS, 4GB-64GB, WIFI + 4G, 8-CORE + DSP and I have a big problem with it. It no longer works. Android opens but I think I have some missing system files and nothing works anymore
If I made the mistake of posting, please excuse me.

New stock rom:
Яндекс
Найдётся всё
disk.yandex.ru
8259P_junsunUI01Ov1280x720-Foreign_v21_20210313
The resolution is 1280 × 720, booting is slower.

robrose said:
New stock rom:
Яндекс
Найдётся всё
disk.yandex.ru
8259P_junsunUI01Ov1280x720-Foreign_v21_20210313
The resolution is 1280 × 720, booting is slower.
Click to expand...
Click to collapse
Hi,
Is that orignal ?
And what is solved after install ?
Ty

...

ORCohenil said:
Hi,
Is that orignal ?
And what is solved after install ?
Ty
Click to expand...
Click to collapse
Much better display quality/resolution. Not slower on my device. It's original.

Hi friends i have a junsun v2 4gb 64gb octacore intel socket sc9853. i have android 9.0 with api 27. i have seen that seller have my unit with android 10.0 but he tell me not have update for me. Any one have update for the system and mcu?
Is for mi kia sportage ql from 2017
Thanks.

Allwinner quad-core t3 k2001-nwd

Hi Everyone
Recently purchased a unit with the below specs:
APPVER: K2001N_NWD_S212701.20191226.212334.01
PlatformVER: K20N-2019/12/26
MCUVER: V3.0-FF01-20190909-A02-CAN0000-00-00-DVD0000000000-00
BTVER: GOC_XR829_4.0/2019/10/24
CANAPPVER: v19.12.23A
CANBOXVER: raise
I have 2 questions:
1. Where can I find firmware for this unit?
2. The "factory settings" menu seems to have an issue on "Gain Settings". I make changes to the gain on the ports but when it reboots it goes back to 0.
Any help would be appreciated.
Thanks

jitenm said:
Hi Everyone
Recently purchased a unit with the below specs:
APPVER: K2001N_NWD_S212701.20191226.212334.01
PlatformVER: K20N-2019/12/26
MCUVER: V3.0-FF01-20190909-A02-CAN0000-00-00-DVD0000000000-00
BTVER: GOC_XR829_4.0/2019/10/24
CANAPPVER: v19.12.23A
CANBOXVER: raise
I have 2 questions:
1. Where can I find firmware for this unit?
2. The "factory settings" menu seems to have an issue on "Gain Settings". I make changes to the gain on the ports but when it reboots it goes back to 0.
Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
Could you detail brand and model and attach a photo of the unit?

ultradj83 said:
Could you detail brand and model and attach a photo of the unit?
Click to expand...
Click to collapse
Hi
I cannot post a link to the website yet but here are the specs on the site. It does not have a brand name on it.
From bidborbuy.co.za
VW 7" Android 8.1 Touch Screen Car Radio For VW Multimedia Player with GPS Navigation Bluetooth USB
Specifications:
Model: VW Player
Decoding Chip: MTK 8227L
Cpu: A7 1.3GHZx4
Size:7 Inch
Memory 1G Storage 16G
FM Radio:87.5~108MHz
Voltage:12V
Bluetooth: Bluetooth 4.0
USB: USB2.0
Audio Amplifier: TDA7388

Hardware is really similar to my unit, both based on 8227L and TDA7388.
I can send the firmware I'm running to you, but no idea if it will run, it might brick your unit.
It works quite fine, but there's 2 problems:
1. Sometimes GPS is slow to fix.
2. On incoming calls it takes up to 10 seconds to start incoming voice, while outgoing voice starts immediately.

ultradj83 said:
Hardware is really similar to my unit, both based on 8227L and TDA7388.
I can send the firmware I'm running to you, but no idea if it will run, it might brick your unit.
It works quite fine, but there's 2 problems:
1. Sometimes GPS is slow to fix.
2. On incoming calls it takes up to 10 seconds to start incoming voice, while outgoing voice starts immediately.
Click to expand...
Click to collapse
Please send me the link, I was not concentrating and loaded a Russian version this afternoon :laugh:
Trying to find the original version but not winning, I would appreciate the link.
Thanks!

jitenm said:
Please send me the link, I was not concentrating and loaded a Russian version this afternoon :laugh:
Trying to find the original version but not winning, I would appreciate the link.
Thanks!
Click to expand...
Click to collapse
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...

ultradj83 said:
Hardware is really similar to my unit, both based on 8227L and TDA7388.
I can send the firmware I'm running to you, but no idea if it will run, it might brick your unit.
It works quite fine, but there's 2 problems:
1. Sometimes GPS is slow to fix.
2. On incoming calls it takes up to 10 seconds to start incoming voice, while outgoing voice starts immediately.
Click to expand...
Click to collapse
ultradj83 said:
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
Click to expand...
Click to collapse
Thanks! Will give this a try
I have a backup unit to install if i break this one so I will play around

Not MTCB.... Requesting Mod move

DIdn't work unfortunately.
I will need to find the chinese original k2001n_nwd firmware for this to get back to normal :laugh:
Will do some digging

Hi again
Managed to source the correct firmware from the russian forums.
The only issue I have is that the gain settings revert back to 0 when saving the config. I am trying to increase the bluetooth/usb volumes but it does not save the changes.
Anyone have a fix for this?

ultradj83 said:
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
Click to expand...
Click to collapse
I can't acces to the link

Alessolabestia said:
I can't acces to the link
Click to expand...
Click to collapse
ultradj83 said:
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
Click to expand...
Click to collapse
Can give again the link for i try whit mine
Thanks

Dear,
as a long time has passed I don't remember exactly what file I shared through that link...
What's your modem (a pic might be useful)?
What's your problem?

i brick my unit and i need image for allwinner t3 k2001 i thinks is ( t3-p2 )

ultradj83 said:
Dear,
as a long time has passed I don't remember exactly what file I shared through that link...
What's your modem (a pic might be useful)?
What's your problem?
Click to expand...
Click to collapse
i brick my unit and i need image for allwinner t3 k2001 i thinks is ( t3-p2 )

copas15 said:
i brick my unit and i need image for allwinner t3 k2001 i thinks is ( t3-p2 )
Click to expand...
Click to collapse
Please send a picture and model specs as I'm not sure what mirror you have...

Greshare GS18950 DMSM5BE Android 8.1 DVR Mirror firmware, tools and bugs list
Hello there. This is the DMSM5BE: DMSM5BE_116_Media_Sleep_2020120715 firmware and tools attached. Known bugs: Wi-Fi off after reboot Bluetooth off after reboot CarKeeper app video streaming not working Park Monitor not working Awful UI...
forum.xda-developers.com

I need miudrive screen please

Hello , I also purchased the same.. with 1Gb ram. Is there any way to increase the RAM externally? I mean like using a class 10 memory card? Maybe its a dumb idea as I'm not a techie. I wanted to increase the RAm because Waze is not fluid smooth in the device. Thanks in advance

請問usb讀不到，要如何處理，謝謝！！
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[BACKUP] 825x Pro based headunits AC8257/8259 SP Flash tool backup

Hello
I managed to brick my 8259 based headunit where it was stuck in FASTBOOT mode, but i also managed to revive it with this backup!
It contains all the data that is needed, see the picture down below. I also have edited the scatter file to pinpoint to every file correctly, just be sure to format before flashing.
The preloader and recovery is at the end of the flash because of verified boot error otherwise.
Thought i could share this so people wont get the headache i went through
825x Pro Backup Download
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Ossuret
أ lps 825x pro 4/64. 4G.
https://a.aliexpress.com/_mKNgAXi
نموذج x8
بعد توقف البرنامج الثابت v1pro 81٪
ريستار
إصلاح fastboot
هذا النسخ الاحتياطي. جيد بالنسبة لي أم لا

اss
أ lps 825x pro 4/64. 4G.
https://a.aliexpress.com/_mKNgAXi
نموذج x8
بعد توقف البرنامج الثابت v1pro 81٪
ريستار
إصلاح fastboot
هذا النسخ الاحتياطي. جيد بالنسبة لي أم لا
Steefzar said:
Hello
I managed to brick my 8259 based headunit where it was stuck in FASTBOOT mode, but i also managed to revive it with this backup!
It contains all the data that is needed, see the picture down below. I also have edited the scatter file to pinpoint to every file correctly, just be sure to format before flashing.
The preloader and recovery is at the end of the flash because of verified boot error otherwise.
Thought i could share this so people wont get the headache i went through
825x Pro Backup Download
View attachment 5484589
Click to expand...
Click to collapse
thanx sir gooooooood job 100✓

Steefzar said:
Hello
I managed to brick my 8259 based headunit where it was stuck in FASTBOOT mode, but i also managed to revive it with this backup!
It contains all the data that is needed, see the picture down below. I also have edited the scatter file to pinpoint to every file correctly, just be sure to format before flashing.
The preloader and recovery is at the end of the flash because of verified boot error otherwise.
Thought i could share this so people wont get the headache i went through
825x Pro Backup Download
View attachment 5484589
Click to expand...
Click to collapse

Steefzar said:
Hello
I managed to brick my 8259 based headunit where it was stuck in FASTBOOT mode, but i also managed to revive it with this backup!
It contains all the data that is needed, see the picture down below. I also have edited the scatter file to pinpoint to every file correctly, just be sure to format before flashing.
The preloader and recovery is at the end of the flash because of verified boot error otherwise.
Thought i could share this so people wont get the headache i went through
825x Pro Backup Download
View attachment 5484589
Click to expand...
Click to collapse

Steefzar said:
Hello
I managed to brick my 8259 based headunit where it was stuck in FASTBOOT mode, but i also managed to revive it with this backup!
It contains all the data that is needed, see the picture down below. I also have edited the scatter file to pinpoint to every file correctly, just be sure to format before flashing.
The preloader and recovery is at the end of the flash because of verified boot error otherwise.
Thought i could share this so people wont get the headache i went through
825x Pro Backup Download
View attachment 5484589
Click to expand...
Click to collapse
Hi please help reshare link because it is no longer active

drstoms said:
Hi please help reshare link because it is no longer active
Click to expand...
Click to collapse
maybe you can find some help on this page (translate whole page via Chrome Google translate)
ГУ на процессоре MTK AC8257, MCU: HDBEC/TS-G5 - 4PDA
ГУ на процессоре MTK AC8257, MCU: HDBEC/TS-G5, [Головное устройство][Автомагнитола][Android]
4pda.to

dedalos91 said:
maybe you can find some help on this page (translate whole page via Chrome Google translate)
ГУ на процессоре MTK AC8257, MCU: HDBEC/TS-G5 - 4PDA
ГУ на процессоре MTK AC8257, MCU: HDBEC/TS-G5, [Головное устройство][Автомагнитола][Android]
4pda.to
Click to expand...
Click to collapse
thank you but I have already looked everywhere my unit is 8259 after flashing spflashtool files to 8257 I have a black screen I thought they were the same units but not because 8259 can only be flashed 8259.bin but if there is a radio with a black screen after flash 8257 it will not upload anymore 2 bin files so I'm looking and there is no whole software anywhere under spflashtool but not under 8257 only under 8259

drstoms said:
there is no whole software anywhere
Click to expand...
Click to collapse
can you see this? (translate via Chrome)
ГУ на процессоре MTK AC8257, MCU: HDBEC/TS-G5 - 4PDA
ГУ на процессоре MTK AC8257, MCU: HDBEC/TS-G5, [Головное устройство][Автомагнитола][Android]
4pda.to
and i will search for you again (translate via Chrome)
https://4pda.to/forum/index.php?act=search&query=AC8259&username=&forums%5B%5D=636&source=all&sort=rel&result=posts

have you searched here?
ac8259
forum.xda-developers.com
and here?
Yt5760b AC8259 Frimware and MCU update files.
Found the Update files for the firmware and mcu. Went from 1.70 Mcu 0.7 to 1.73 Mcu 2.1 updating firmware also updated canbus to 10.0 It is for YT5760b 4gb Ram 8 core 1024x600 resolution. My unit System Info says that it is ac8259 but a separate...
forum.xda-developers.com
and here?
XYAUTO
file manager
file.xygala.com
user xyauto
pass 123456

unfortunately, on these threads, they also did not provide a link to the full spflashtool software that would clear my radio. I tried to unpack the correct 8259.bin file with python with the 8227 unpack file, but something is not going well, although I also do not know if such a distributed bin will match the spflshtool tool

dedalos91 said:
have you searched here?
ac8259
forum.xda-developers.com
and here?
Yt5760b AC8259 Frimware and MCU update files.
Found the Update files for the firmware and mcu. Went from 1.70 Mcu 0.7 to 1.73 Mcu 2.1 updating firmware also updated canbus to 10.0 It is for YT5760b 4gb Ram 8 core 1024x600 resolution. My unit System Info says that it is ac8259 but a separate...
forum.xda-developers.com
and here?
XYAUTO
file manager
file.xygala.com
user xyauto
pass 123456
Click to expand...
Click to collapse
Yes, from all pages I have probably already looked at 4pda on xygala (Xyauto login xyauto 123456) under 5760b horizontal screen of the software under 6gb of ram they flash through spflash but the screen remains black

dedalos91 said:
have you searched here?
ac8259
forum.xda-developers.com
and here?
Yt5760b AC8259 Frimware and MCU update files.
Found the Update files for the firmware and mcu. Went from 1.70 Mcu 0.7 to 1.73 Mcu 2.1 updating firmware also updated canbus to 10.0 It is for YT5760b 4gb Ram 8 core 1024x600 resolution. My unit System Info says that it is ac8259 but a separate...
forum.xda-developers.com
and here?
XYAUTO
file manager
file.xygala.com
user xyauto
pass 123456
Click to expand...
Click to collapse
There is software created for the 8259 unit in two files 8259.bin and 8259upd if someone could and had the opportunity to create software for spflashtool from such a bin file for 8259, I think the radio would stand up

The Chinese unit 8259 needs a firmware with android auto support

Hello,
I recently bought a unit for a BMW e60 CCC
XONRICH 6GB 128GB Android 11 Car Radio For BMW 5Series E60 E61 E63 E64 E90 E91 E92 E93 CCC CIC Multimedia CarPlay GPS Navigation
I'm asking for help in finding the firmware for it, best with android auto wiralles and carplay.
Maybe someone has a Junsun firmware that fits this unit.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hello everyone... I have exactly the same device. there is actually no one who knows which firmware belongs on the device?

Alguien resolvió el problema?
Mod translation: Did someone solve the problem?

Fixed download link
The firmware has not been verified and is used at your own risk
I do not bear responsibility for the bricks!!!
Диск
files.sberdisk.ru

Please help mi identify hardware - Uckazy 8259l HU (Alps 825x_pro) for bmw e70
Hi, I am so confused, and would really appreciate help. I read numerous threads and comments, but not able to understand the unit i have. I bought on aliexpress Uckazy 8259l model for bmw e70, which seems to be Alps 825x_pro according to CPUZ...
forum.xda-developers.com

i have a problem with this unit, idrive does not work in all android, it only works in the main menu

localos said:
Fixed download link
The firmware has not been verified and is used at your own risk
I do not bear responsibility for the bricks!!!
Диск
files.sberdisk.ru
Click to expand...
Click to collapse
Hy there,the link is not active! I need help because a make an update but does not work with my device i i need now at lest the original firmware.Please help me in some way! Thanks a lot!

puiutu73 said:
Hej, link jest nieaktywny! Potrzebuję pomocy, ponieważ aktualizacja nie działa z moim urządzeniem. Potrzebuję przynajmniej oryginalnego oprogramowania układowego. Proszę, pomóż mi w jakiś sposób! Wielkie dzięki!
Click to expand...
Click to collapse
WeTransfer - Send Large Files & Share Photos Online - Up to 2GB Free
WeTransfer is the simplest way to send your files around the world
we.tl

Kaczmar1989 said:
https://we.tl/t-4NZL6iVTnT[/
Click to expand...
Click to collapse
[QUOTE="Kaczmar1989, post: 885189...]
najnowszy system dla xonrich 8259
[/QUOTE]

https://we.tl/t-tm1sKwYrg2
starszy system

Kaczmar1989 said:
WeTransfer - Send Large Files & Share Photos Online - Up to 2GB Free
WeTransfer is the simplest way to send your files around the world
we.tl
Click to expand...
Click to collapse
Thanks a lot,hope fine! thanks !

Kaczmar1989 said:
http://
Click to expand...
Click to collapse
Could you please update the link with the firmware? This one is no more valid. Thanks a lot!

https://drive.google.com/file/d/19ZAnFKWZLOAS38GVT4K6nwrYwypFXqqx/view?usp=drivesdk
nowy system

Google Drive: Sign-in
Access Google Drive with a Google account (for personal use) or Google Workspace account (for business use).
drive.google.com
stary układ

Hello, I'm having a problem with the same ****. I bought a car audio company in Lodz because I was afraid of the Chinese and it was a mistake! I described this problem here in the forum in another topic. Generally, I need a batch file because I inserted a flash drive and he told me to format it so I did and then he asked if the flash drive should be shared memory and I accidentally pressed ok and all system files were irreversibly copied to the flash drive. The liar who installed me says it's my fault and there's nothing he can do about it because it's irreversible. I used it maybe two months and it's still under warranty but you can't get along with this idiot to help. The device resets while driving and generally goes dumb. I got angry and took it out and installed it in another Comfortmedia company but that one is lying and I would like to fix it and sell it. Please help, it's a shame to lose so much money. Below is a picture of the one I need soft for.

K706 - 1.8 GHz x 8 - UIS7862A - QF001

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Latest Firmware ( May 2023 )
https://jitufirmwarezlink20230508.oss-eu-central-1.aliyuncs.com/update.zip
https://jitu375344745mcu230207.oss-eu-central-1.aliyuncs.com/mcu.bin
The factory setting passwords are 0000/000000/8888/1234/3368/7890/123456.
Spec when received unit from retailer:
Android 12
mcu: QF01.V01: 45: 20220818.011021
System: QF001.20220817.221459
DSP: BD37534
Radio: TSC4745
Processor: 1.8 GHz x 8 - UIS7862A
Device Name: K706
Software version: ums512_q0_20211130
Build number: QF001.20220817.221459
Hardware: QF001
DDR: 3GB
FLASH: 32GB
Update Instructions:
1. download these two files. copy <Update.zip> and <MCU.bin> to the root directory of a formatted USB drive(FAT-32).
2. plug the U-disk into the unit. enter Settings-General-System Upgrade. the system upgrade will start automatically. the step takes about 6 minutes, please do not cut the power off during the process.
3. after upgrading the system, enter Settings-General-MCU Upgrade- select the upgrade file -Confirm to do MCU upgrade. the step takes about 1 minute.
4. to activate the weather APK, please set your cellphone WiFi hotspot name as FYQP5QRG, and connect the player WiFi to your cellphone hotspot, and then it will activate the weather APK. When you are using an iPhone, please do not connect your iPhone Bluetooth to our player before you activate the weather APK, it is very important. After you activate the weather APK, you can connect your iPhone Bluetooth normally.
all bugs are now resolved, May and onwards is very stable build.
if you radio has different versions of DSP and Radio this update is not for you
DSP: BD37534
Radio: TSC4745

Whats about launcher? Is it possible now to set your own launcher as default?
Do google assistant work?

today i get newere update from HIZPO seller
The system firmware link： https://jitufirmwarecarletter230207.oss-eu-central-1.aliyuncs.com/update.zip
The MCU document link https://jitu321074745mcu230207.oss-eu-central-1.aliyuncs.com/mcu.bin

Good morning, so glad to find this thread!
Any word on the amount call features blocking the system or the launcher?
I was able to do the system update, thanks for that! Couldn't do the MCU update though.

Hi guys, there is another thread that is 49 pages long already. Link. Please check it out.
Also, @xdsbx, what is your unit? Is it an S1-4 or S5-8? The MCU seems to be specific to these 2 groups. Your firmware and MCU dates looks like the latest one released. Here is a dedicated thread for the firmware and MCU. Firmware

popamor said:
Hi guys, there is another thread that is 49 pages long already. Link. Please check it out.
Also, @xdsbx, what is your unit? Is it an S1-4 or S5-8? The MCU seems to be specific to these 2 groups. Your firmware and MCU dates looks like the latest one released. Here is a dedicated thread for the firmware and MCU. Firmware
Click to expand...
Click to collapse
It is a Hizpo 3c Unit.

xdsbx said:
It is a Hizpo 3c Unit.
Click to expand...
Click to collapse
I have not heard of a 3C, what is the ram sizes? Check the 1st link I shared above, it has a table and has the different machines with their ram sizes listed. Maybe 3C is a new variant. It would be interesting to know what are the differences with the other units that has been discussed in the other thread already.

popamor said:
I have not heard of a 3C, what is the ram sizes? Check the 1st link I shared above, it has a table and has the different machines with their ram sizes listed. Maybe 3C is a new variant. It would be interesting to know what are the differences with the other units that has been discussed in the other thread already.
Click to expand...
Click to collapse
It is the same unit as in description. Only the ram storage is 4Gb Rom 32gb.

May update with lot of improvements , works very well.
https://jitufirmwarezlink20230508.oss-eu-central-1.aliyuncs.com/update.zip
https://jitu375344745mcu230207.oss-eu-central-1.aliyuncs.com/mcu.bin