Related
Hi all, fortunately I have my motorola Atrix but I have a problem when playing videos by hdmi to TV, connect the phone and it started the implementation of video on TV but nothing comes out, it is as if not detected, know if I have to do something special on the phone to work this out??
Thanks and regards
Do you select the webtop or media setting once you plug it in? If so, and you aren't getting anything, then your unit might be defective.
Sent from my Nexus One using XDA Premium App
hello I am Spanish and do not quite understand what I say, I connect my phone to the TV by HDMI and then open the rocketplayer by example and not play anything on TV.
I've seen people talking about playing with the entertaiment center hd but can not find how to start that application. I've seen that in managing applications is a size 0.0B, may be why?
Where I can get this application??
Thanks and regards.
josete_chaco said:
hello I am Spanish and do not quite understand what I say, I connect my phone to the TV by HDMI and then open the rocketplayer by example and not play anything on TV.
I've seen people talking about playing with the entertaiment center hd but can not find how to start that application. I've seen that in managing applications is a size 0.0B, may be why?
Where I can get this application??
Thanks and regards.
Click to expand...
Click to collapse
When you plug in the HDMI cable, a pop-up should appear on the phone asking to start the HD Entertainment Center. That's the only way to get video-out onto the TV. If this isn't popping up and you haven't done anything to modify your phone software, then your device my have a problem.
ok thanks for the help, the only modification I've done is to make the root software, nothing else has that something to do?
I have only tested on a old TV, I'll try another to see if that is the problem, my TV is the first that came with hdmi at best can that be right?
Greetings
My Atrix had something wrong with it's HDMI, I had to return it and get a new one. When I plugged it in to a TV the phone would act properly (the pop-up menu would appear, and the controls would be present when the media center was selected) but I wouldn't see anything but snow on my TV. I also tried a HDMI computer monitor to the same effect. I lastly went to the ATT store and tried a dock, same problem.
Interesting to know that it was more than just mine.
Oh, mine was stock, not rooted yet.
-Tom
Hi all, ultimately the problem is not the phone, I tested a friend's TV and it works perfectly, when you connect me jump hd window center and all good, so I have a problem with my TV.
If someone happens just as well try it on another TV in case.
Thanks for the tips and greetings.
I got a UG007 ii from Amazon for $50. I ordered the original version UG007 but got the one with two microUSB ports, research shows it is the UG007 ii. Very lucky to get a free upgrade, but after reading some other forums also very lucky to not get a *clone*. After reading about clones, and ordering problems, I can report complete success and happiness.
Not many thorough guides and lots of random stabs at getting rooted. Some of the downloads set off my Avira anti virus which was bad, so anything not totally clean was deleted and not used.
DRIVERS: Getting the drivers to work on Window 7 x64bit took some searching and work. I was surprised that both microUSB ports will supply power to the UG007, but only the microUSB next to the microSD slot will work for adb. Also, there is an extra USB section in the settings that allows your device to communicate (at all) with the PC. Wrapping my head around the fact the UG007 ii device defaults to supporting multiple USB host ports, it makes sense there is a switch to reverse the defaults for connecting to a PC. Twisted brain stuff. LOL.
ROOT: Many various methods exist. I found only one root method that worked, and all others I tested failed. After the drivers are working, it is very easy to root using TPSarky-VonDroid-Root.zip. I really like this method installs SuperSU, and I updated it via the market afterwards. I verified root successfully, loaded busybox and terminal emulator via the marketplace.
RECOVERY: I update.zip installed a CWM recovery successfully. The xda member fun_ has this great post for RK3066 devices. Follow the links to CWM-based Recovery images for RK3066 devices and download the UG007_CWM.zip for Ugoos UG007. Aterwards just rename to update.zip and push to /sdcard and install.
During this whole process I used a USB keyboard with small touch pad for *mouse*. The CWM recovery only works with keyboard, but I could have used only a USB mouse on drivers and root setup, because the device has an onscreen keyboard.
Overall the device works great. There are some cons:
First: There appears to be no microphone nor record ability with the stock ROM. I tried lots of bluetooth headsets which play music and movies fine but the microphones failed. I ordered and will try an external USB soundcard dongle later.
Second: There is a security problem because the screen never locks nor sleeps, with one random exception (clicking on items in notifications). The workaround for security is a wonderful application "Smart Lock Free" and its widget to lock/unlock all with one click.
Nothing else really bothers me, so I must say this device is an exciting Android Stick Computer.
Model: rk30sdk
Android version: 4.1.1
Kernel version: 3.0.8+ [email protected] #169 SMP PREEMPT Thu Dec 20 18:07:08 CST 2012
Build number: RK30_ANDROID4.1.1-SDK-v1.00.1015 rk30sdk-eng4.1.1 JRO03H eng.ant.20121220.180742 test-keys
UPDATE ONE: The device is available on Amazon and others. Search for "UG007 ii", verify 2 microUSB ports, verify Android 4.1.1, verify looks same as below:
Afunta(tm) Bluetooth Ug007 Mini Pc Android 4.1 Google Tv Dongle Dual Core Cortex A9 Wifi 1080p RAM 1gb+rom 8gb+3d (2 Micro USB Slots)
Price $56.99 USD from afunta-mall
or
New Version Bluetooth Ug007 II Mini PC Android 4.1.1 Google TV Dongle Dual Core Rockchip 3066 Cortex A9 Wifi 1080p RAM 1GB+ROM 8GB
Price $62.48 USD from geekbuying.com
The above are just two vendor examples, looks exactly like mine. There are many other good vendors. The geekbuying.com guys are interesting because on their website they released a 4.2.2 ROM for this stick. There are also many bad vendors and clones which look different and are not UG007 ii. Your mileage may vary. Good luck.
UPDATE TWO: I have now tested three USB sound cards. The only working USB soundcard, that survives a reboot still working, is the Syba SD-CM-UAUD USB Stereo Audio Adapter, C-Media Chipset, RoHS. With this USB soundcard the audio input (microphone) and output (speakers) work with the UG007 ii. See further information in next post.
I added the USB sound card. Now I am able to use a microphone on the UG007 ii. Great.
The (semi) working device is Syba SD-CM-UAUD USB Stereo Audio Adapter, C-Media Chipset, RoHS The microphone input works, audio output not.
UPDATE: Finally got audio input and output working with this device. Basically, plug and play is not always a reliable method. Instead reboot with device connected and audio in & out works.
I also got another fancy USB sound card from Syba that does not work for input nor output. This one finally worked. This one did **not** work for me. I did little troubleshooting.
UPDATE: After further testing I found this device also works, but sometimes crashes on plug and play. When I reboot with device connected the audio in & out works, and subsequent plug and play works. Typical problems are caused by plug and play device with recorder application open or music player open, or switching devices with plug and play without rebooting.
So, with a microphone connected on the first, I decided to try VOIP programs again. After installing Groove IP, same as before it crashed when launched. However, Talkatone works. It is complicated to get it working. Here is what I did:
Installed Talkatone, In the settings it gives under the *Phone* tab, I selected Call Settings. I changed Start Call on "normal". It was set to "BlueTooth (when available)", but I could never get the microphone working, listening with bluetooth headset and microphone input to the USB sound card. Bluetooth was wierd because I was able to hear on the headset with setting "Bluetooth (when available)" but neither the bluetooth nor USB sound card microphone input worked. Bluetooth devices never show in the Android Sound settings.
Under Android Settings, Sound, Sound Devices Manager. With the above USB sound card connected the options are:
Talkatone working configuration:
Sound input devices: USB PnP Sound Device (***selected)
Sound output devices:
ROCKCHIP HDMI (***selected)
USB PnP Sound Device (not selected)
Note: I switched my audio OUT setting to HDMI and connected a speaker to the back of my HDMI monitor. You, like me, are probably now saying WTF. Yes? While the microphone is working on USB PnP Sound Device it seems the audio output does not work on either of my USB sound cards. However, with Talkatone setup Start Call on normal, the HDMI audio output works with the microphone input on USB PnP Sound Device. LOL
UPDATE: If you reboot with USB sound card connected you can use USB PnP Sound Device output. But, plug-n-play may kill your output until reboot with connected.
I run tests using Music player for audio output, and the Sound Recorder for input. The Sound Recorder application can be *found* on the stick computer in the /system/app folder. It is bundled with the device but I was unable to find a launch icon. Information on Sound Recorder is Version 4.1.1-eng.ant.20121212.085830 Once run, I can subsequently find & run again using search on "SoundRecorder". Also, in the Play market the Sound Recorder Shortcut by Kayan Nurav gives an icon as a fix to launch Sound Recorder.
Using these configurations I can successfully make Talkatone voice calls with the UG007 ii. My voice quality depends on microphone sensitivity. The sound out via HDMI to speakers sounds perfect.
There are still some annoyances. After reboot or re-plugging the USB sound card: if you want Rockchip HDMI output the Android settings need to be fixed (as shown above). I frequently test sound output using the music player and test input with sound recorder because of frequent sound input and/or output failures requiring me to reboot. Definitely a work in progress, yet interesting.
UPDATE: Finally got audio input and output working with these devices. Basically, plug and play is not a good method. Instead reboot with device connected and audio in & out works. I tested a third USB sound card where audio input/microphone does *not* ever work. If you find some, please post further examples of working USB soundcards in this thread.
quick question
i want to use the stick computer as web/ftp server so i only need it on and there is no need to a TV except for the first time i use+configure
does the stick turn on and boot just by plugging the power ??
mf_ said:
quick question
i want to use the stick computer as web/ftp server so i only need it on and there is no need to a TV except for the first time i use+configure
does the stick turn on and boot just by plugging the power ??
Click to expand...
Click to collapse
No, it does nothing with power plugged only. I must first plug HDMI and then power to get boot.
Bob Smith42 said:
No, it does nothing with power plugged only. I must first plug HDMI and then power to get boot.
Click to expand...
Click to collapse
can you please do me a favor (im asking because not connecting to tv avoids extra electricity costs, since android can be controlled trough airdroid)
connecting the HDMI cable only to ug007ii and leave the other side hanging loose without connecting to TV
does it boot ??
mf_ said:
can you please do me a favor (im asking because not connecting to tv avoids extra electricity costs, since android can be controlled trough airdroid)
connecting the HDMI cable only to ug007ii and leave the other side hanging loose without connecting to TV
does it boot ??
Click to expand...
Click to collapse
No. It does not power up when connected only to cable. But, if you turn off monitor and connect cable it does boot.
There is an old hack of putting resisters on DB15 video connectors and plugging into laptop external video ports. What this did was enable new screen resolutions on 1st generation netbook computers. It was something if done wrong could also ruin your video card. LOL
Thinking along the same lines there us surely some way to fake the HDMI monitor connection by hacking an HDMI plug.
Cant Wait
I just got the exact same unit you did I was expecting the UG007 cant wait to hook it up in the AM Thanks for all your postings it will be a great guideline for me.
Thanks Again
Thx, OP, for this thread~! It came in really handy after I purchased the UG007II and I was looking for a way to root and install CWM. I got this for mom for Mother's Day and she really loves it for watching Netflix shows & movies.
CWM for Official UGOOS 4.2.2 firmware
Has anyone else upgraded to the latest official 4.2.2 firmware? I have and it's very good. Smoother, faster, and everything still works, of course. I also got it rooted using the original method for the original Android 4.1.1 firmware.
But I'm having issues with CWM. I installed the original UG007 CWM through the Rockchip flash tool (as opposed to the update.zip method b/c it doesn't work with 4.2.2 anymore) but I can't actually create any Nandroids inside CWM. Things aren't being mounted & recognized correctly.
Does anyone know of any updated CWM recovery for 4.2.2?
i try everithing and cant connect to my pc de UG007 II
WORK IN PROGRESS: UPDATING
STOP PRESS: FIRESTARTER 3.0 RELEASED. SANITY RESTORED.
http://forum.xda-developers.com/fire-tv/themes-apps/app-root-home-launcher-replacement-app-t3118135
Before sending your Fire TV/Stick back to Amazon in disgust, beware of its limitations, and try these tips.
Bottom line is it's going to be a solid step up from Fire TV 1. But right now, it has a few issues.
Let's talk about the elephant in the room: the angry reviews. Almost all the complaints are about the glitchy remote (we have a fix), battery cover (sometimes the customer isn't always right), audio issues (Amazon is patching, stay tuned). No question, it's got some bugs out of the gate, but Amazon has responded and hopefully all will be resolved shortly . Enjoy:
http://www.amazon.com/Amazon-DV83YW-Fire-TV/product-reviews/B00U3FPN4U/
Fire TV 2: hardware shortcomings by design that many regard as substandard.
If these are important, you might need to look elsewhere.
1. USB 2.0 not even USB 3.0. USB-C is the new standard appearing on phones and laptops.
2. Ethernet 10/100 not GB.
3. No optical port. Possible solution: http://www.amazon.com/dp/B010JQMHNW/?
4. HDMI 1.4, not HDMI 2.0, limited to 4K at 30fps.
Software bugs and annoyances, most probably due to OS 5, but yet to be confirmed.
Could be fixed either by Amazon or developers.
1. Audio limited to stereo other than for Amazon Prime. Quiet audio.
As promised, Amazon has released a patch (extremely quickly):
“By this coming Monday, October 12th, you will receive an automatic software update that enables Dolby Digital Plus for customers who have a Dolby Digital Plus system (including support for Netflix and Amazon Video). An update for older Dolby Digital systems (not Dolby Digital Plus) will be distributed on November 30th.” -Amazon
Update from AFTVNews:
One of the new device’s largest complaints, a lack of Dolby Digital surround sound support, which has been partially fixed already, stems from changes made to support Netflix. I’m told by my source at Amazon that Netflix gave the Fire TV engineering team a new version of their software at the last minute which required changes to the Fire TV’s software to work correctly. Those changes conflicted with Dolby Digital surround sound support. With not enough time to fix support for both, Amazon was faced with the decision to ship without Netflix or without Dolby Digital surround sound. They chose the latter which, in my opinion, was the right choice.
http://www.aftvnews.com/amazon-is-d...-internal-testing-pool-for-bug-fixing-effort/
2. Fire TV 2 WiFi Remote drops out, glitchy, lags, etc.
Do this when setting up if you're connecting via Ethernet: disconnect your LAN cable, connect to WiFi, reconnect your network cable.
And then do this anytime if your remote becomes laggy: disconnect Ethernet cable, reconnect Ethernet cable.
That should fix it. Really, it's usually that simple.
If not, there could be interference, you could try changing channels or frequency on your router or restrict the available protocols (just N or AC, for example). Let us know if you're still having problems.
3. Highly inconvenient to launch Kodi and other sideloaded apps.
Long story, somewhat shortened: The Fire OS only shows icons for apps obtained from Amazon's App Store. That, unfortunately, doesn't include Kodi, everyone's favourite media player, and about 99% of the reason the AFTV has a cult following. There have been two popular ways to get around Amazon's belligerence: by having Kodi launch as proxy of another app (usually Ikono TV) using Llama; or by employing Firestarter to bind it to the Home button.
Both can be loaded via ADFire.
Unfortunately, Llama no longer works (for this purpose) in OS5/AFTV2, so skip that route and install FireStarter:
ADBFire : http://forum.xda-developers.com/showthread.php?t=2786505
FireStarter http://forum.xda-developers.com/fire-tv/themes-apps/app-root-home-launcher-replacement-app-t3118135
Kodi: http://kodi.tv
I recommend mapping the Home Button single click to Kodi, and the Home button double-click to Amazon Home. Or if you'd prefer to use Firestarter as your home screen, then map it to the double-click. The added bonus to this setup is every time you're in Kodi and hit the Home button inadvertently, instead of losing your **** yet again, it'll just flash in and out of the app and then pause whatever you're watching.
Here's a guide on sideloading to the Fire. Again, I strongly recommend ADBFire:
http://www.aftvnews.com/sideload/
If you have an Android tablet or phone, there are several apps that can push apps across to the Fire, such as Apps2Fire. That way you can download your apps direct from the official Google Play Store. Don't forget they won't automatically update. You'll need to push those updates across as well.
4. Can't connect via ADB to sideload using ADBFire etc since using FireStarter
First up: make sure you have ADB enabled. Settings>System>Developer Options> Both ADB Debugging and Apps from Unknown Sources need to be On.
FireStarter has two methods of intercepting Home button presses: one using ADB, and one not using ADB. The issue that's arisen since the introduction of Fire OS 5 is that the operating system no longer permits parallel ADB connections, so if FireStarter is using it to intercept Home button presses, you won't be able to connect to the Fire TV using ADB, and thus you won't be able to sideload apps and files using ADBFire.
We now have two options:
Option 1 (Firestarter won't use ADB): Open FireStarter, under Settings, uncheck "Home Detection via ADB."
Advantage: You only need ADB enabled to connect with ADBFire. No need to touch FireStarter.
Disadvantage: Only detects your customized Home button choices within the Fire TV's home screen, and not within apps. Pressing Home within Kodi, for example, will return you to the Home screen. Pressing it again will send you back to Kodi (or whatever action you've chosen. A potential advantage is this now gives you three variants of the Home button: a single and double-click from the Home screen; and the traditional Fire TV Home shortcut from within any app.
Option 2: (FireStarter uses ADB): Open FireStarter, check "Home Detection via ADB"
Advantage: FireStarter will now obey your Home button choices (single and double-click) from anywhere.
Disadvantage: You will either need to kill FireStarter (see below) or temporarily revert to Option 1 in order to do your ADB stuff. Note: there's now a handy shortcut direct to the ADB Debugging toggle within FireStarter.
Tip: If you go with Option 2, you can quickly kill FireStarter's grip on ADB by going: Settings>Manage Applications>FireStarter and Force Stop. And then restarting FireStarter or the Device once you've finished your ADB business.
5. External storage limited to disks formatted in FAT32.
There's no reason why Amazon couldn't enable other formats, but there's little incentive to bother. Even Macs don't support NTFS out of the box. Either format your drives in FAT32 (and split larger files if necessary) or move them to a network share. Not hard to work around. Here's a tip:
http://www.aftvnews.com/how-to-play...b-off-the-fire-tvs-fat32-usb-storage-in-kodi/
6. Difficult to remove battery cover?
No it's not. Slide it back then lift it up. Dead easy:
https://www.youtube.com/watch?v=R3t1GOCzjzY&
7. Can't move Kodi to external storage.
http://www.aftvnews.com/some-apps-like-kodi-cannot-write-to-external-storage-yet-on-fire-os-5/
Upgrade to Jarvis (still in alpha but perfectly acceptable).
8. LED only glowing when it detects a remote button press
Either a bug or a new way of doing things. Either way, it's not ideal.
9. Can't Chromecast from Android device to Fire TV
Yes, you can cast from Youtube, but nothing else (that I can find). Blame Google for that:
http://www.aftvnews.com/google-has-chromecast-receiver-app-pulled-from-fire-tv-appstore/
You can, however, Airplay to it. Via Kodi is one method, that usually works, but can be flaky sometimes. There are a bunch of apps you can try. Some work better than others. I picked up this one when it was free, it works:
http://www.amazon.co.uk/x9F99-x65B9-x513F-AirReceiver/dp/B00L5HQRGS/
And for those of you with other Amazon devices, there's always Fling:
https://developer.amazon.com/public...g/docs/understanding-the-amazon-fling-service
How about Bluetooth controller frequently loses connection to the AFTV? Mine drops it's connection probably 2 or 3 times every hour.
sudman said:
How about Bluetooth controller frequently loses connection to the AFTV? Mine drops it's connection probably 2 or 3 times every hour.
Click to expand...
Click to collapse
Isn't the AFTV2 remote Wi-Fi?
I will be watching this thread closely. Thank you for posting.
Sent from my HTC One_M8 using XDA Free mobile app
list additions
I would add to the list:
Issues with day 1 software update, (several resets, issues to get working)
Wifi remote constantly cuts on/off (taking out batteries seems like temp fix)
Stutters in apps like WatchESPN
Second the dropping of lama/kodi icon support
Despite better hardware, little change in actual performance (yet to be fully seen)
Claude Koch said:
Isn't the AFTV2 remote Wi-Fi?
Click to expand...
Click to collapse
I was under the impression that it was BT same as the original but cant find a definitive answer eitherway. Eitherway the damn thing keeps discontecting!!!! Will be sending mine back if things dont improve fast.
sudman said:
I was under the impression that it was BT same as the original but cant find a definitive answer eitherway. Eitherway the damn thing keeps discontecting!!!! Will be sending mine back if things dont improve fast.
Click to expand...
Click to collapse
http://www.aftvnews.com/list-of-all-fire-tv-and-fire-tv-stick-remote-and-game-controller-specs/
Claude Koch said:
About time we compiled a tally of what's broken, missing or just plain annoying on the new Fire TV, and what's (about to be) broken by the official release of OS 5 on the old Fire TV.
4. More to come.....
Click to expand...
Click to collapse
Thanks for this. I was criticized elsewhere for bringing up some shortcomings of 2. I am very interested in the gizmo you linked that breaks off the 5.1 via Optical and 2ch mini-jack from the HDMI stream. The product dates back to 2013 which makes me skeptical. I've bought a few of these that did not work. I have 4 port Monoprice HDMI switch that has the 5.1 and 2ch breakout. It disappoints as it is 5.1 OR 2ch, not both. The one's I have had tried similar to your post would pass sound to all six speakers but it was in reality Stereo which will fool some people. The clue for me is, does the blue Dolby light come on? A quick test for DD Plus handling is "House of Cards". If you get a blue light viewing that, it's good to go. It's been almost a year since I last fooled with them so maybe there is something that is NEW and works.
I am still looking for one that really works. The only thing I know that splits off 5.1, for real, is 1's Optical connector.
What's funny is that I pitched my Roku3 over the DD+ impasse. Now Roku4 is coming out and it HAS an optical connector.
I have an Echo/Alexa too and waiting to see how all that works out with my 1 if it does at all. I'm rooted so unless Rbox comes through, I'm out of luck. Right now my Echo is pretty much a party novelty but it can now control my Nest and Insteon devices. Just found the most useful feature is using it as a meat timer.
It's a shame 2 isn't all of 1 but better and more.
I had problems with the connection with my remote too.
Are you used ethernet at the first start to connect with your router? Never set up wifi connection?
Try this
1. disconnect fire tv from ethernet
2. connect fire tv to wifi
3. reconnect the remote to fire tv
4. connect fire tv to ethernet again
for me i think it works... I am not 100% sure because the connection lost was very rare before. but give it a try.. :laugh:
There are huge issues with the WiFi the gain on the 5GHz 802.11ac is terrible in addition to issues above. I sent two of them back. Returning all of them is the only way Amazon will fix this!
I hate to say it, but it's looking like a lemon.
Edit: things are looking much better today.
What is an "Accessory Port". On my 1 I use a little dongle called Flirc to allow my Logitech Harmony One unified remote to control it. Needed it to feed the "Menu" command to 1. I now have a Harmony Ultimate with Hub and just imported the same settings.
I wonder if 2's "Accessory port" will allow a Flirc dongle to support unified IR remotes. Also wonder if it is even necessary with the 2. The Ultimate remote is still totally IR but the Hub is WiFi allowing it to talk to some smart devices. Guess I could test but hate to fix something that ain't broke. That's the main reason I'm afraid of 2. See no benefit except for 4K and I don't have that. My 1 setup works pretty well.
What I want to do is ditch my $160/mo DirecTV bill and replace it with another DVR option. SBC (aka AT&T) ate them and nothing good will come from that. "Repeating" myself, the Tivo Bolt is intriguing. Would replace FireTV and DirecTV. On the other hand, my rooted 1 with Nova Launcher and a Logitech K400 KB is a pretty nice little big screen Android box.
Nothing is just right.
sudman said:
How about Bluetooth controller frequently loses connection to the AFTV? Mine drops it's connection probably 2 or 3 times every hour.
Click to expand...
Click to collapse
It's an abomination. Seems like the wifi keeps dropping out.
Edit: fixed.
Claude Koch said:
It's an abomination. Seems like the wifi keeps dropping out.
Click to expand...
Click to collapse
But it's ON SALE. hurry while the supply lasts. Pulling 2 1/2 Stars. Not good.
http://www.amazon.com/dp/B00U3FPN4U/?tag=aftvndeal-20
The Main Reason AFTV 2 Is Not For Me
Root and Nova Launcher
Claude Koch said:
It's an abomination. Seems like the wifi keeps dropping out.
Click to expand...
Click to collapse
A page back i posted a method to fix that if you are used ethernet cable at the first start o AFTV2.
Try this
1. disconnect fire tv from ethernet
2. connect fire tv to wifi
3. reconnect the remote to fire tv
4. connect fire tv to ethernet again
For me no connection losts between remote control and AFTV2 after a couple of hours.
I know the Apple TV was looming, but I don't get why Amazon felt the need to rush this out so fast. There just really isn't a reason to refresh a video streaming device annually. I understand they wanted to beat Apple to 4K, but looks like it cost them this time. I am sure updates will make it better, but this box might be the dud when we look back and the history of these things. I just hope it doesn't flop so bad they stop future revisions.
MajorWinters said:
A page back i posted a method to fix that if you are used ethernet cable at the first start o AFTV2.
Try this
1. disconnect fire tv from ethernet
2. connect fire tv to wifi
3. reconnect the remote to fire tv
4. connect fire tv to ethernet again
For me no connection losts between remote control and AFTV2 after a couple of hours.
Click to expand...
Click to collapse
Thanks for the tip. I'm going to let it be for a couple of days, then try your fix. Otherwise, I won't know it it helped.
Been trying to get it to detect the bluetooth remote from my other Fire TV but not having any luck.
EDIT: Great tip, seems to have done the trick! Added to list.
I sent mine back. I can't believe that the newer Fire TV performs much worse than my 1st Gen Fire TV. Here is what I find annoying.
Remote cover is very hard to open. Broke my nail and it took me nearly a half hour to get it open. Once it is open it is much easier after.
Remote freezes and stops responding. Have to take out batteries and put them back in. At first I though the unit froze but my BT keyboard works fine. Had to use that quite often.
Netflix no 5.1 surround sound. Also it takes much longer to get up to 1080p. On my old Fire TV 1080p instantly and if not just restart the stream. On the 2nd gen Fire TV mud quality sub 480p which can take up to 40 seconds or longer to get to 1080p unless I fast forward and rewind the stream but then it ends up ruining what I am watching when there are spoilers in the beginning of the program.
Other third party apps actually run worse. They stutter and skip frames like trying to watch a HD video on a Celeron PC from 2008.
The external storage option is a joke. First thing is they should have included more than 8gb of internal storage because the external microSD is useless. I moved all the apps and games I can to the external storage however most apps and some games still store at least half the data on internal storage so even then I was already running low on space while my 64gb microSD barely used any space.
Box runs much warmer than before and I have it on a cooling pad.
To me the picture quality seems worse. I don't have a 4k TV just 1080p but the picture is much darker and reds look more pixelated.
That is what I can think of off the bat but in the end I ended up sending it back like many others and I see a recall soon from Amazon. They should have never released this thing as the 1st Gen Fire TV was pretty much perfect. Yes it had issues when it first came out mainly the once outdated Netflix app and having to occasionally clear the Amazon video data app when it would not play but otherwise it performed much better than this new thing does.
It's looking like under OS5, external storage is sandboxed as read-only to Kodi. The same seems true of Android TV (Nvidia Shield), so I suppose it's a Lollipop security issue. If I'm right, this means no moving Kodi data/thumbnails to external storage and using the /sdcard/xbmc_env.properties to redirect. Can anyone confirm/disprove this?
Hi everyone,
I'm new to the forums, but I read the rules and I think I'm in the right place.
I own the original Nvidia Shield TV. I've long wanted touch emulation and to sideload games that I can play on my phone but on my TV. A couple years ago I rooted my shield, had a dual boot setup (Android TV + Full Android Marshmallow), and purchased Videomapit's Droid Mote server and client as well as his profile app. This worked for all intensive purposes, but it was clunky. My girl friend couldn't get the hang of using flashify to switch back to stock Android TV to watch Netflix, and I felt I had to use multiple game controllers, a keyboard, mouse, etc to navigate fluidly. I have since returned the shield to stock and given up on touch emulation...until....
The other day I came across this app in Google Play: USB Gamepad TouchMapper by makithappendigital. Apparently if I buy an Arduino Board: Micro, ProMicro, Leonardo or Beetle USB Stick and plug my gamepad into that using this app, touch screen on stock Android TV is now viable.
I have a couple questions...
1.) Has anyone actually tried this or something similar and did it work well?
2.) What is the difference between Micro, ProMicro, Leonardo or Beetle Arduino boards? Is one more effective for what I'm trying to accomplish, cheaper, or can be used for more than what I'd be purchasing one for (swiss army knife)?
Thank you in advance for your help and advice.
-OverClocked-
Use octopus! Thank me later
Slayerkodi said:
Use octopus! Thank me later
Click to expand...
Click to collapse
Although I appreciate your help I have to pass on this app... Many people of complained they have gotten credentials stolen in reviews.
Cut/Copy/Paste of permissions required from the Play Store:
This app has access to:
Device & app history
retrieve running apps
read sensitive log data
read your Web bookmarks and history
Cellular data settings
change/intercept network settings and traffic
Identity
find accounts on the device
add or remove accounts
read your own contact card
modify your own contact card
Calendar
read calendar events plus confidential information
add or modify calendar events and send email to guests without owners' knowledge
Contacts
find accounts on the device
read your contacts
modify your contacts
Location
approximate location (network-based)
precise location (GPS and network-based)
access extra location provider commands
SMS
read cell broadcast messages
read your text messages (SMS or MMS)
receive text messages (MMS)
receive text messages (SMS)
receive text messages (WAP)
send SMS messages
edit your text messages (SMS or MMS)
Phone
directly call phone numbers
reroute outgoing calls
read call log
read phone status and identity
make/receive SIP calls
write call log
add voicemail
Photos/Media/Files
access USB storage filesystem
read the contents of your USB storage
modify or delete the contents of your USB storage
Storage
read the contents of your USB storage
modify or delete the contents of your USB storage
Camera
take pictures and videos
Microphone
record audio
Wi-Fi connection information
view Wi-Fi connections
Device ID & call information
read phone status and identity
Wearable sensors/Activity data
body sensors (like heart rate monitors)
Other
access the cache filesystem
Access download manager.
connect and disconnect from WiMAX
choose widgets
delete other apps' data
delete apps
power device on or off
download files without notification
force stop other apps
directly install apps
interact across users
full license to interact across users
manage users
update component usage statistics
Read install sessions
read your social stream
read sync statistics
close other apps
adjust your wallpaper size
read subscribed feeds
write subscribed feeds
transmit infrared
modify app ops statistics
modify battery statistics
modify/delete internal media storage contents
write to your social stream
read Home settings and shortcuts
write Home settings and shortcuts
receive data from Internet
view configured accounts
access other Google services
YouTube usernames
AdSense
AdWords
Google App Engine
Blogger
Google Calendar
contacts data in Google accounts
Dodgeball
Google Finance
Google Base
Google Voice
Google Groups
Google Health
iGoogle accounts
JotSpot
Knol
Picasa Web Albums
Google Maps
Google mail
Google mobile apps
Google News
Google Notebook
Orkut
Google Book Search
Google Webmaster Tools
Google Voice Search
Personalized Speech Recognition
Google Talk
Google Wi-Fi
Google Spreadsheets
Google Docs
YouTube
read instant messages
write instant messages
mock location sources for testing
view network connections
act as the AccountManagerService
create accounts and set passwords
read battery statistics
pair with Bluetooth devices
access Bluetooth settings
send sticky broadcast
change system display settings
change network connectivity
allow Wi-Fi Multicast reception
connect and disconnect from Wi-Fi
Change WiMAX state
delete all app cache data
disable your screen lock
expand/collapse status bar
control flashlight
measure app storage space
full network access
close other apps
change your audio settings
control Near Field Communication
make app always run
read sync settings
read terms you added to the dictionary
run at startup
reorder running apps
set time zone
set wallpaper
draw over other apps
use accounts on the device
control vibration
prevent device from sleeping
modify system settings
toggle sync on and off
add words to user-defined dictionary
set an alarm
write web bookmarks and history
install shortcuts
uninstall shortcuts
Google Play license check
read Google service configuration
=====
Has anyone had any experience with Arduino Boards?
That list is ridiculous, I will be deleting the app. Thanks for the heads up
Slayerkodi said:
That list is ridiculous, I will be deleting the app. Thanks for the heads up
Click to expand...
Click to collapse
Your welcome slayerkodi!
I am still looking for the answer to my 2 questions in my first post. Has anyone had experience with Arduino boards and touch emulation?
Bump...
Anyone?
USB Gamepad TouchMapper by makithappendigital. Apparently if I buy an Arduino Board: Micro, ProMicro, Leonardo or Beetle USB Stick and plug my gamepad into that using this app, touch screen on stock Android TV is now viable.
I have a couple questions...
1.) Has anyone actually tried this or something similar and did it work well?
2.) What is the difference between Micro, ProMicro, Leonardo or Beetle Arduino boards? Is one more effective for what I'm trying to accomplish, cheaper, or can be used for more than what I'd be purchasing one for (swiss army knife)?
3.) I am not familiar with Arduino boards, and I was hoping you could help me pick the lowest cost board that will work for Gamepad TouchMapper on Amazon.com. Can you send me a link or two of known boards that work on Amazon?
4.) Also I have a PS3 controller, but I noticed the PS4 has a touchpad. Does the touchpad work via the Arduino board on the Shield TV? If so I'd like to purchase a new controller.
5.) Is it possible to use the lesser expensive Snakebyte Gamepad for PS4 - Wired Controller? This controller is half the price.
6.) Can I use a 15 foot USB 3.0 extension cable to plug the controller into the board?
7.) What other cables do I need...I thought I read something about an OTG cable? Can you send me a link on Amazon?
I have started a thread about your software on an Android forum. Please answer my questions and I will help promote your product on the forum and to friends/family if this all works:
Thank you in advance for your help and advice.
Click to expand...
Click to collapse
Hi,
1) Google told me, that the App Gamepad TouchMapper will crash from the start on Android TV's (maybe google do not allow the "Overlays" on TV Devices). Maybe someone can install the Demo and send some crash reports. Then I can see what I can do.
2) The only difference is the USB port. For the Beetle (Amazon: CJMCU-Beetle-Leonardo-ATMEGA32U4-Development-Arduino) you don't need an USB cable, for all the others you need an USB cable to plug it in the USB Hub.
3) I'm using this: CJMCU-Beetle-Leonardo-ATMEGA32U4-Development-Arduino
But you can also use this (incl. USB Cable): KEYESTUDIO-Arduino-Compatible-Micro-Atmega32U4
4) PS3 and PS4 are working fine. The PS4 Touchpad is a Button only with Gamepad Touchmapper
5) No. But you can use the old XBox 360 USB "wired" gamepad
6) Yes.
7) You need the USB OTG cable for other Android Devices (Tablets, Smartphones) only, because they have no full USB 2.0 Port. UGREEN-Adapter-Samsung-Controller-Smartphone
Hint: With my NVidia Shield Tablet (with HDMI Output Port) the Gamepad Touchmapper is working fine. It has the same Processor like the NVidia Shield TV. And with an USB OTG Y Cable you can use USB OTG (USB Devices like: Gamepad, Ethernet, Arduino, ...) and charge the Tablet at the same time. So you don't need the NVidia Shield TV anymore. You can also install an Android TV Launcher on your tablet. Then you have the same usability like you know it from a real AndroidTV Device.
The best thing with the Gamepad Touchmapper is: it is made for Gamepad handling including the settings. You do not need fingers or a mouse to set up the settings/games. And you don't need a rooted device.
MakeItHappenDigital said:
Hi,
1) Google told me, that the App Gamepad TouchMapper will crash from the start on Android TV's (maybe google do not allow the "Overlays" on TV Devices). Maybe someone can install the Demo and send some crash reports. Then I can see what I can do.
2) The only difference is the USB port. For the Beetle (Amazon: CJMCU-Beetle-Leonardo-ATMEGA32U4-Development-Arduino) you don't need an USB cable, for all the others you need an USB cable to plug it in the USB Hub.
3) I'm using this: CJMCU-Beetle-Leonardo-ATMEGA32U4-Development-Arduino
But you can also use this (incl. USB Cable): KEYESTUDIO-Arduino-Compatible-Micro-Atmega32U4
4) PS3 and PS4 are working fine. The PS4 Touchpad is a Button only with Gamepad Touchmapper
5) No. But you can use the old XBox 360 USB "wired" gamepad
6) Yes.
7) You need the USB OTG cable for other Android Devices (Tablets, Smartphones) only, because they have no full USB 2.0 Port. UGREEN-Adapter-Samsung-Controller-Smartphone
Hint: With my NVidia Shield Tablet (with HDMI Output Port) the Gamepad Touchmapper is working fine. It has the same Processor like the NVidia Shield TV. And with an USB OTG Y Cable you can use USB OTG (USB Devices like: Gamepad, Ethernet, Arduino, ...) and charge the Tablet at the same time. So you don't need the NVidia Shield TV anymore. You can also install an Android TV Launcher on your tablet. Then you have the same usability like you know it from a real AndroidTV Device.
The best thing with the Gamepad Touchmapper is: it is made for Gamepad handling including the settings. You do not need fingers or a mouse to set up the settings/games. And you don't need a rooted device.
Click to expand...
Click to collapse
Thank you very much! I am going to place an order on Amazon for the Arduino board and give it a try. I will report my results here in the next week or two.
over_clocked said:
Thank you very much! I am going to place an order on Amazon for the Arduino board and give it a try. I will report my results here in the next week or two.
Click to expand...
Click to collapse
I think I've found a way to use Overlays with the NVidia Shield TV (there is a different API for TV). I've ordered one, and then I will make an App especially for the Shield TV and Android TVs next week. I've published also a 2nd App to play Games with Mouse and Keyboard (https://play.google.com/store/apps/details?id=com.makeithappend.keymousetouchmapperdemo). I'm so happy to have the possibility to do it without root and without hacks. Now it's perfect for me. There are so nice games in the App Store with fantastic 3D Graphics, but it annoyed me to play these games with fingers. With Mouse und Keyboard and also Gamepad it's easier and it makes more fun
MakeItHappenDigital said:
I think I've found a way to use Overlays with the NVidia Shield TV (there is a different API for TV). I've ordered one, and then I will make an App especially for the Shield TV and Android TVs next week. I've published also a 2nd App to play Games with Mouse and Keyboard (https://play.google.com/store/apps/details?id=com.makeithappend.keymousetouchmapperdemo). I'm so happy to have the possibility to do it without root and without hacks. Now it's perfect for me. There are so nice games in the App Store with fantastic 3D Graphics, but it annoyed me to play these games with fingers. With Mouse und Keyboard and also Gamepad it's easier and it makes more fun
Click to expand...
Click to collapse
Ok so my arduino board arrived! I ended up purchasing this one:
https://www.amazon.com/gp/product/B0786LJQ8K/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
And I bought this case to protect it:
https://www.amazon.com/gp/product/B07984HVT7/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
So I tried your "original" demo on Nvidia Shield TV and it allows me to assign the analog stick and a button to the screen, but never allows me to actually test the stick and the button. Your app was on sale a week or two ago so I purchased it. With the full application it never detects the ps3 dualshock controller is plugged in. Then I realized that a long time ago when I rooted my Shield TV I had used the sixaxis pairing utility to change the master address to pair via Bluetooth (please note my Shield TV is no longer rooted, I returned it to stock firmware). I assumed Bluetooth connectivity was the problem. So I plugged my ps3 controller into my computer, ran the sixaxis pairing utility and created a fake address so it would no longer pair with my Shield TV. I then verified that my Shield TV was no longer pairing with my ps3 controller via Bluetooth.
I opened your paid app on the shield. When it asks me to plug in the ps3 controller it still does not detect the controller. However the USB hub, usb cable, and ps3 controller is working as I am able to navigate through menus on my Shield TV with the PS3 controller, so I do not know what is wrong here. I can't test on my phone because I have a Google Pixel and it uses USB C, so I do not have USB C to 5 pin mini B cable at the moment, but I'm sure it would work.
I will wait for your new app to test on the Shield TV once you incorporate the new API.
Thanks for the reply. Interesting. I have to think about.
I will receive my NVidia Shield TV Device in a few days, then I can more to say.
Btw. did you connected the Arduino Board and then ack the permissions a few times? After two ack permissions you have to see a PopUp Window with "Modify Data" and then "Success! Reboot... please wait 10 Seconds!"
If not, then the Arduino Board is not activated.
---------- Post added at 08:55 PM ---------- Previous post was at 08:37 PM ----------
I've tested my PS3 Controller with the Paid App and my NVidia Shield Tablet ... it found the controller (ask permission) the menu was coming up, but no control. Then I pressed the PS button once, then I could navigate the menu.
The PS3 controller is working also with the paid app.
MakeItHappenDigital said:
Thanks for the reply. Interesting. I have to think about.
I will receive my NVidia Shield TV Device in a few days, then I can more to say.
Btw. did you connected the Arduino Board and then ack the permissions a few times? After two ack permissions you have to see a PopUp Window with "Modify Data" and then "Success! Reboot... please wait 10 Seconds!"
If not, then the Arduino Board is not activated.
---------- Post added at 08:55 PM ---------- Previous post was at 08:37 PM ----------
I've tested my PS3 Controller with the Paid App and my NVidia Shield Tablet ... it found the controller (ask permission) the menu was coming up, but no control. Then I pressed the PS button once, then I could navigate the menu.
The PS3 controller is working also with the paid app.
Click to expand...
Click to collapse
Thank you for your reply! When I was using the demo, I remember it was asking for permission. I thought I granted it, but it kept nagging for permission relentlessly. It's not asking anymore?!? I do not remember if it ever said "modify data" or not. How can I get Android to ask again? Also my arduino board has a green power light on that is solid. Additionally it has a yellow light that is blinking. The letter "L" is next to the yellow flashing light. I'm not sure that is a problem or not... I have gone into settings, developer options, revoked usb debugging, disabled and re-enabled usb debugging (this was probably not necessary, but just troubleshooting). I still can not get the Shield TV to ask for permission.
over_clocked said:
Thank you for your reply! When I was using the demo, I remember it was asking for permission. I thought I granted it, but it kept nagging for permission relentlessly. It's not asking anymore?!? I do not remember if it ever said "modify data" or not. How can I get Android to ask again? Also my arduino board has a green power light on that is solid. Additionally it has a yellow light that is blinking. The letter "L" is next to the yellow flashing light. I'm not sure that is a problem or not... I have gone into settings, developer options, revoked usb debugging, disabled and re-enabled usb debugging (this was probably not necessary, but just troubleshooting). I still can not get the Shield TV to ask for permission.
Click to expand...
Click to collapse
For this app you don't need Developer options or other options/settings.
If you have more than one TouchMapper Apps installed, then you have to quit all running TouchMapper Services! Reason: The other Services are stealing the device and you will never see a reaction with the app you are currently using.
If the Arduino Board "L" LED is blinking every second, then the Board is not modified by the App. The Arduino Board is correct modified if both LEDs TX/RX are blinking every 3 seconds. Unplug and replug the board. Then you will be asked about permissions (on some devices you have to press "OK" very quickly, otherwise the Arduino board will not work) and then you will see "modify data". This is only necessary for the first time. If the board is modified, then it will be instantly activated when you connect the board (no wait time).
YouTube Video: https://youtu.be/It_T2Dl6c70
I will receive my NVidia Shield TV wednesday, then I can say more about the Shield.
MakeItHappenDigital said:
For this app you don't need Developer options or other options/settings.
If you have more than one TouchMapper Apps installed, then you have to quit all running TouchMapper Services! Reason: The other Services are stealing the device and you will never see a reaction with the app you are currently using.
If the Arduino Board "L" LED is blinking every second, then the Board is not modified by the App. The Arduino Board is correct modified if both LEDs TX/RX are blinking every 3 seconds. Unplug and replug the board. Then you will be asked about permissions (on some devices you have to press "OK" very quickly, otherwise the Arduino board will not work) and then you will see "modify data". This is only necessary for the first time. If the board is modified, then it will be instantly activated when you connect the board (no wait time).
YouTube Video: https://youtu.be/It_T2Dl6c70
I will receive my NVidia Shield TV wednesday, then I can say more about the Shield.
Click to expand...
Click to collapse
Your video was helpful, thank you. I think I may have checked the box a few times (Use by default for this USB device) when I was asked for permissions, and therefore the board was never modified by your app. I am not sure how to reset that option in android as unplugging the board and plugging it back in no longer asks for permission. Under settings>apps>permissions there are no defaults set. I also hit the reset button on the arduino board, but that didn't help either. I hope you enjoy your Shield TV, it is truly a great device. The video processor is an upgrade over the shield tablet Tegra K1 processor. The Shield TV uses the Tegra X1 processor if I remember correctly.
over_clocked said:
Your video was helpful, thank you. I think I may have checked the box a few times (Use by default for this USB device) when I was asked for permissions, and therefore the board was never modified by your app.
Click to expand...
Click to collapse
You can try to install the App on an other Andorid device and modify the Arduino Board there.
This looks really cool! Years ago, I was able to use a Wii remote as a mouse on android. It was incredible, and I would gladly pay you handsomely if you could use this method and make it happen again. To illustrate what I am looking for, it was this. https://youtu.be/r1d1tU6o-Uo
If you can make that happen on my Shield TV, I would give you $, and shout your name from the rooftops for people to buy your app! Do you think that is possible using your method here?
bradleyw801 said:
This looks really cool! Years ago, I was able to use a Wii remote as a mouse on android. It was incredible, and I would gladly pay you handsomely if you could use this method and make it happen again. To illustrate what I am looking for, it was this. https://youtu.be/r1d1tU6o-Uo
If you can make that happen on my Shield TV, I would give you $, and shout your name from the rooftops for people to buy your app! Do you think that is possible using your method here?
Click to expand...
Click to collapse
This were easy, and I have the code, but is not working, how so many other function I would use. Google changed the Bluetooth Stack since Android 5 or so, till then Wii Bluetooth is not possible anymore.
But you can use another Phone to simulate the Wii Controller without IR Lights This is in the making.
MakeItHappenDigital said:
This were easy, and I have the code, but is not working, how so many other function I would use. Google changed the Bluetooth Stack since Android 5 or so, till then Wii Bluetooth is not possible anymore.
But you can use another Phone to simulate the Wii Controller without IR Lights This is in the making.
Click to expand...
Click to collapse
Yes, I remember. I used to use my Wii remote as a light gun for emulators and games like Major Mayhem. Unfortunately all airmouse or gyroscopic methods don't work well when trying to use it as a gun. Wii IR is the best for that purpose. Please let me know if you find a way to make this work with an arduino. Thank you!
bradleyw801 said:
Yes, I remember. I used to use my Wii remote as a light gun for emulators and games like Major Mayhem. Unfortunately all airmouse or gyroscopic methods don't work well when trying to use it as a gun. Wii IR is the best for that purpose. Please let me know if you find a way to make this work with an arduino. Thank you!
Click to expand...
Click to collapse
With an Arduino Leonardo + USB Host Shield + USB BT CSR Dongle it were possible.
But I don't know it for the NVidia Shield TV (different than normal Android Devices), I will test it in a few days.
Hmmm... I could make wireless Gamepad (Wii, PS3, PS4, XBox) also possible with Arduino Leonardo.
Update: Wii Remote (incl. Pointer) + Arduino Leonardo + Touch is working fine with Android Devices (without TV), but it was not easy, because of the low memory of the Arduino Leonardo, and some USB trouble with Android.
Waiting for my NVidia Shield TV Device.
Kindle Fire 10 (2019 version) running 7.3.1.0 I believe; it's never been updated out of the box and system updates are turned off so it can't tell me from the Settings app. But anyway.
I bought a dopey little $20 Bluetooth keyboard for another project. It works just fine on a Raspberry Pi I tested it on and on my pretty vanilla phone (BLU Vivo XL4 running relatively recent Android).
I decided it might be nice to use it with the Fire tablet so I opened Bluetooth on the tablet, set both the tablet and the keyboard to pair, and the keyboard appeared in the list of connected devices. Trouble is, the tablet isn't responding to key presses. I can open any app that accepts input and try to type with the keyboard but nothing goes through to the app.
is there anything I need to do to tell the tablet, "Hey tablet, see this thing over here you say you're connected to? It's a keyboard. Listen to it and repeat what it says." I've checked input and keyboard settings but I didn't see anything relevant.
Thanks!