Related
I've had the following problem which I solved and now I'm wondering if anyone else found it, since I'm afraid it might point out to some hardware fault.
When selecting LG Software mode on the phone for connecting to your PC, Windows (in my case, 7 x64) attempts to install an MTP USB Device, but fails with Code 10: Device cannot start. At this point I (after many trial-and-error cycles) had to select Update Driver for that device in Device Manager, select Browse my computer for driver software > Let me pick from a list of drivers, and from the next screen, pick USB Composite Device instead of MTP USB Device. It installed right away and then 4 other USB devices popped up, which also were installed (using Windows Update). After this, LG PC Suite (and also LG Mobile Support Tool) detected the phone with no problems.
So, were any of you confronted with this?
Just wanted to say I had the same problems following your steps allowed me to get this to work. Thanked!
Thank you so much. This solved the problem.
I'm actually having this same issue. When I click "Show me a list of blah blah" it doesn't give me a USB Composite option. I only get two MTP options, and if I check "Show Compatible Hardware" it shows a bunch of drivers for MTP, WMP, and some other protocols. Any ideas?
gunnarizbeast said:
I'm actually having this same issue. When I click "Show me a list of blah blah" it doesn't give me a USB Composite option. I only get two MTP options, and if I check "Show Compatible Hardware" it shows a bunch of drivers for MTP, WMP, and some other protocols. Any ideas?
Click to expand...
Click to collapse
I am in the same situation, can you help how to fix this?
this problem fix?
I have a problem. Phone download mod work but I connect computer not connect phone. Says "This device can work faster". Device manager says yellow exclamation.
I try any computer but problem doesnt fix.
metalboy94 said:
I've had the following problem which I solved and now I'm wondering if anyone else found it, since I'm afraid it might point out to some hardware fault.
pick USB Composite Device instead of MTP USB Device. It installed right away and then 4 other USB devices popped up, which also were installed (using Windows Update). After this, LG PC Suite (and also LG Mobile Support Tool) detected the phone with no problems.
So, were any of you confronted with this?
Click to expand...
Click to collapse
yes, but unfortunately i don't have USB Composite Device as a selection on Windows 7 64bit. any other suggestions to get this stupid lg software installed?
After spending over 6 hours on this problem and installing a new windows, I finally found the culprit, it was Xposed Media Scanner, disabling it fixed the problem. Of course if you did not install this module before then the solution is not for you, maybe it will help someone reaching this page from Google.
put in a new SSD and got Windows 8.1, did a fresh install on a new hard-drive, everything's been working great, My nexus 4 has worked with with ADB./Fastboot and I've been able to transfer files to and from it in MTP mode. Been like that for about 4 days until about 3 hours ago, I had Windows Explorer crash, had to run Task Manager, end the process, and then manually restart explorer.exe My device was plugged in when this happened, and afterwards, I noticed that I could no longer see my Nexus 4 under the Devices & Drives section of "This Computer" (My Computer had a better ring to it lol) First I tried rebooting both my laptop and my Nexus 4, then I tried uninstalled the drivers, rebooting, re-installing, and then rebooting again. Did that like 4 times now, each time re-downloading the drivers, and doing an MD5 hash to create a Checksum, and checking them each time. Also to no avail. ADB shows my device serial number when i enter : ADB Devices, but says it's unauthorized, so if I try anything like: ADB Reboot Bootloader, it says Device is not authorized.
So ! I don't understand wtf is going on. Was working fine before. The drivers are up to date, I just flashed the Official OTA image, and was on the leaked image prior to that. Then earlier this evening I switched to the newest version of the Nexus 5 Port, and everything was still working fine, hadn't made any changes in a couple hours before this happened. When I install the drivers, It acts like it worked. Instead of saying "NEXUS 4" under Other Devices in my Device Manager, it says Composite ADB Interface under Android Devices and MTP under Portable Devices. Sometimes tho the MTP entry will still show the Yellow Exclamation Point. But goes away. Don't know whats up with that either.
Also, it wont let me install drivers unless I am in MTP mode, which Usually you can install them regardless (tho I never tried in Camera mode, I am just assuming about that one) Usually I install drivers without MTP or Camera modes checked, but now if I try it, it says that Windows Cant find the Drivers, even tho I am obviously browsing for them myself and selecting them. And just now I tried updating instead of re-installing them, and it keeps saying that Windows has determined they are the most up to date.
So I am out of I ideas. I even updated windows media player cause that's what fixed my issue on Day 1 of running Windows 8.1 when it wouldn't recognize it at all. So I don't know. Sorry for the long post but I wanted to make sure I got everything in there so hopefully someone can narrow down what the issue is. Cause I've been at it for 3 hours, haven't slept yet, my Nexus 5 gets here today, and I need to get this fixed before I sell it to my buddy. Its brand new, only 15 days old.*
Any thoughts ?*
First, connect your Nexus 4 and use Device Manager to uninstall both MTP and ADB devices, make sure to check the box to delete the driver files as well. Then uninstall any other usb or adb drivers for other Android devices.
Then disable USB Debugging on the phone and get MTP to work first, Windows should be able to install it automatically.
For ADB, Windows 8 will not allow to install unsigned driver. To install unsigned driver, reboot Windows 8 into Advanced startup and press F7 at the menu to disable driver signature (Google it if you don't know how). Although you could install Google USB driver which is signed I think, I recommend using Universal Naked Driver (link in sig.)
ADB Devices, but says it's unauthorized
Click to expand...
Click to collapse
You need to authorize it from your phone, when you connect your phone to the PC with USB Debugging turned on, a toast message on the phone will ask you to authorize the device.
eksasol said:
First, connect your Nexus 4 and use Device Manager to uninstall both MTP and ADB devices, make sure to check the box to delete the driver files as well. Then uninstall any other usb or adb drivers for other Android devices.
Then disable USB Debugging on the phone and get MTP to work first, Windows should be able to install it automatically.
For ADB, Windows 8 will not allow to install unsigned driver. To install unsigned driver, reboot Windows 8 into Advanced startup and press F7 at the menu to disable driver signature (Google it if you don't know how). Although you could install Google USB driver which is signed I think, I recommend using Universal Naked Driver (link in sig.)
You need to authorize it from your phone, when you connect your phone to the PC with USB Debugging turned on, a toast message on the phone will ask you to authorize the device.
Click to expand...
Click to collapse
ok I am gonna try that now. And as far as the part about my phone being unauthorized. I already knew about the notification that pops up, i was waiting for it to happen. Never did tho. Maybe it will happen after I do the rest of what you said. thanks, i will post my results in a min
no matter what i do, i cant get MTP working. When i uninstall the ADB entry in Device Manager it gives me the check-box option for removing drivers as well, but not on MTP. And now it wont even give me the option to uninstall, update, or anything at all, even tho I uninstalled it already so it should at least give me the option to install drivers. Even tho it's showing up in Device Manager as a Portable device, if I look in Printers and Devices, it shows up as unspecified device. Disabled USB Debugging, and all that. it says its working but it wont show up in My Computer>Devices and Drives still. For some reason ever once in awhile it will pop up with the Yellow Exclamation Point tho, only for a brief second tho. other then that, its shows it like it's running correctly. Also, nothing pops up saying that windows is installing drivers when i plug it in. Which in Win 7, XP, etc, it always did. Does this not happen in Windows 8.1 ?
Also, under Driver Details, which is the only option it lets me click on MTP, it says the drivers are from 2006 lol
Update - Just reinstalled the drivers for ADB and enabled USB Debugging, and everything is still saying its working even tho its not. But when I take my phone out of MTP mode it shows up in device manager under "Other Devices" as Nexus4, with a Yellow Exclamation, and it gives me the option to update drivers, so i tried, but it says Windows Can't find my driver. This is very frustrating.
Had this problem aswell, which was caused by the N version of Windows 8 versions.
These versions dont have Windows Media Player istalled, which is needed for MTP to work.
So to fix your problem you need to download that latest Windows Media Player (WMP) from microsoft and install that.
I dont have the N version, I have WMP installed, i mentioend your fix in the OP. Had to update it, and it worked. It was working fine for the last few days, then it stopped working suddenly
double post, sorry. dont know why that happened.
Vouch. Since I use win8.1 (no n version) Mtp doesnt work. I tried all known drivers, disabled driver signature and so on. The only working combination for me is Usb Debugging + PTP. Then I use file manager to cut the files. Airdroid would be an alternative as well.
update - SOLVED * Kind of.....I say kind of cause I still don't know what caused it but apparently Flashing to the Nexus 5 Port fixed the issue lol. I am assuming something pertaining to the way USB connectivity is controlled by Android got corrupted, and a fresh install was in order. Whatever it was, it worked and i am back in business. thanks to all those who attempted to help.
Sent From My Nexus 4 via XDA Premium 4
trying to get some help for my ZE551ML 4gb - unrooted and with the latest update
I have never had an issue plugging my phone into my pc and transferring files. I bought my daughter a BLU R1HD and that wont wont show up on any pc when plugged into USB...yes dev and debug is enabled.....installed a bunch of different drivers to try to get that phone to work and it wont....
but worse is now my phone wont show up.
I went to the main thread here and located drivers and installed, and nothing....went to asus support and dl drivers and nothing...
does anyone know why or how i can get the drivers installed on my W10 PC so I can plug phone into usb and transfer files?
In the pc's device manager, is the device listed there? And is there a yellow mark on the device name? Maybe the drivers didn't install properly, you can right click on the device and click update driver, then choose automatically, you must be connect to the internet for it to find the required driver and install automatically.
I had same issue. Makw sure phone is not. Plugged into the pc. Load up windows into safe mode with networking. Once there open device manager. From the pulldown menu choose show hidden devices then find the Asus drivers and uninstall and if available tick the box that says delete the driver.. reboot, reinstall.... Done.
This will work for most usb devices that are having issues.
Frankenberrie said:
I had same issue. Makw sure phone is not. Plugged into the pc. Load up windows into safe mode with networking. Once there open device manager. From the pulldown menu choose show hidden devices then find the Asus drivers and uninstall and if available tick the box that says delete the driver.. reboot, reinstall.... Done.
This will work for most usb devices that are having issues.
Click to expand...
Click to collapse
sadly this did not work. I grabbed the drivers from the ZF2 resource thread here at XDA
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
for the BLU R1HD I was told to install these
https://androidmtk.com/download-mtk-usb-all-drivers
whih i did and also uninstalled and resinstalled along with the intel drivers.
I did exactly as explained above and the device will not show up.
I have the Z00AD -- ZE551ML -- 4GB/2.3GHz 64gb version running Stock OS with NO ROOT - an its up to date (v 40.194)
I attached screen shot to show what I have going on - thanks
come on
Are you using the same cord for both phones with the computer? If so, try a different cord
Sent from my ASUS_Z00A using Tapatalk
Reboot the pc with the "disable driver signature verification" option and then reinstall the drivers.
This may or may not have some relevance to your problem. Try downloading a program called USB Device Viewer, run it as an administrator and uninstall all the phone drivers that are listed. Reboot your computer, plug your ZE551ML in and let it install the drivers. Hope this is of some help.
i finally fixed this bs problem. simply a matter of device manager >>>> portable devices >>>>> right click >>> update drive>>> browse my computer >>> Let me pick>>>
for me i had
Model
MTP Device
MTP USB Device
select MTP USB DEVICE >>> Click Next and done
how stupid is this? the simple solution after 2 weeks of pain in the ass is what makes this so stupid.
Hi,
I've received a couple of days ago two Onplus 5.
They both work great but when I try to connect them to my desktop, they get detected as "qualcomm hs-usb diagnostics 900e" by windows 10 that states the USB device is not recognised.
The issue is reproduced on a laptop, although it did get picked up once by the laptop, only to fail on a second attempt with the same device name "qualcomm hs-usb diagnostics 900e" after I installed the driver provided by Oneplus.
I read on the forum that "qualcomm hs-usb diagnostics 900e" is normally related to Bricked phone issues, which is not my case and I don't know what to do to resolve this.
I also tried to activate the USB debug mode on the phone, but this didn't change the problem.
My windows are all up to date and my phones as well (running Android 7.1.1, OxygenOS 4.5.2)
Has anyone experienced this issue with that phone or any other?
I would greatly appreciate some help and I thank you in advance for reading this and offering advice.
Unplug phone, restart windows.
Go to settings / about phone / press build number 5-6 time (don't remember exactly how many times) to enable developer options
turn on USB debugging
select USB configuration MTP (media transfer protocol)
plug it in
Install drivers
And now on you should have it working every time you plug it to your laptop.
dcrnic said:
Unplug phone, restart windows.
Go to settings / about phone / press build number 5-6 time (don't remember exactly how many times) to enable developer options
turn on USB debugging
select USB configuration MTP (media transfer protocol)
plug it in
Install drivers
And now on you should have it working every time you plug it to your laptop.
Click to expand...
Click to collapse
Thanks dcrnic, I must have skipped a step with the debugging mode because your procedure did the trick.
Is this a normal process to have to go to Dev mode and Debug mode to be able to connect to a PC?
Thanks again for your help!:good:
Win 10 do not recognize device as it is so new. Probably in the future this will be solved on Windows end.
I found online link for drivers
https://drive.google.com/file/d/0B-LgkimFUEksbjRCY1BkWnduVW8/view?usp=sharing
Moderators
Please delete ... Today forum is so slow, and it do double posting for some reason even I press reply just once.
Thank you.
FIXED: Use stock op5 cable. The other cable that gave me issues works just fine for op2.
The phone used to be seen by win10, but since oem unlock and superSU, the computer at work doesn't recognize it. Ran the 4.5.2 update with same results. I noticed that in Developer Options -> Select USB configurations charging is selected and greyed out. Going in selecting anything else returns is to Charing.
Device Manager > Find the phone > Right click > Update drivers (or something like that) > Select driver from Computer > Select "MTP USB Device" Enjoy
I'm having the same issue. If I manage to get it to connect to the PC, then after I unplug and plug it again it gives the same not recognised balloon. It only seems to work with USB Debugging On
I ended up using the original op5 cable and it recognizes the phone right away.The cable that didn't work for op5 is not stock, but worked perfectly fine for op2.
Same issue
Even I'm facing the exact same issue on my op5
dcrnic said:
Win 10 do not recognize device as it is so new. Probably in the future this will be solved on Windows end.
I found online link for drivers
https://drive.google.com/file/d/0B-LgkimFUEksbjRCY1BkWnduVW8/view?usp=sharing
Click to expand...
Click to collapse
The drivers are on the phone, they're mounted as a drive when you plug the phone in? They even add ADB tools when you install them, they're in C:\Program Files (x86)\OnePlus USB Drivers and the ADB tools are in the Android folder within there.
djsubterrain said:
The drivers are on the phone, they're mounted as a drive when you plug the phone in? They even add ADB tools when you install them, they're in C:\Program Files (x86)\OnePlus USB Drivers and the ADB tools are in the Android folder within there.
Click to expand...
Click to collapse
Yes, they are on the phone, but computer need to recognize device to see it. It does not, so the drivers on the phone are useless in this case.
I compared this to my ZTE Axon 7. If you choose "Charge only" the Axon 7 is recognized as a USB input device. This should also happen for our OP5 but the driver (which btw. is a windows standard driver) does not contain PID 900E and also does not like to have it forced to a USB input device.
The Axon 7's PID is F006.
However, the real issue is when Windows decides to use Qualcomm's HS USB Diagnostic Interface driver which seems to give even more trouble (at least for me). When I tried to switch to MTP this would not work and my Windows 10 hung itself up when rebooting or shuting down. For now I just disabled the "Unknown device" to prevent such things from happening. Charging still works this way and the phone is correctly recognized when changing to MTP.
If you are facing the same issue, disconnect the Oneplus 5 from your PC, reboot the PC and after that launch the device manager. You need to enable hidden devices in the view menu of the device manager to see disconnected devices. Now remove the device "Qualcomm HS USB Device Interface" and also choose to uninstall the driver itself. After that you can connect your device again and it should pop up as "Unknown device". Then simply disable the device.
Regarding the drivers from Oneplus: this package is lacking a driver for the device we are seeing (VID_05C6&PID_900E).
Does anyone know if the latest update (OxygenOS 4.5.5 update) addresses this issue? It says the following as one of the bug fixes:
"To restore connectivity to a Windows 10 PC, please turn off USB debugging prior to the upgrade"
aa_chow said:
Does anyone know if the latest update (OxygenOS 4.5.5 update) addresses this issue? It says the following as one of the bug fixes:
"To restore connectivity to a Windows 10 PC, please turn off USB debugging prior to the upgrade"
Click to expand...
Click to collapse
Worked for me, only remember to Uncheck usb debugging BEFORE the update....
Hmm, didn't work for me, same behavior as before the update...Qualcomm HS-USB as soon as phone is plugged in...USB debug was off.
Sent from my ONEPLUS A5000 using Tapatalk
try changing port (and remember to restart the pc)
Just got my phone today. It updated to 4.5.5 immediately. All I did was connect it to the computer (windows 10) and everything works.
bricky23 said:
Just got my phone today. It updated to 4.5.5 immediately. All I did was connect it to the computer (windows 10) and everything works.
Click to expand...
Click to collapse
It worked the first time too, but not the second time...at that point connected detected as Qualcomm HS-USB Diagnostic, and computer won't shut down.
And yes I installed it a few time, and it works the first time connecting, but not the second time around.
Sent from my ONEPLUS A5000 using Tapatalk
I don't have my OP5 yet, but I had a very similar and difficult experience with my OP3 when I first received it on Windows 10 Pro. On top of installing the proper drivers, I also had to go into Device Manager and run some steps (I'm going off on memory so they may not be entirely accurate). The root cause is driver signature check enforced in Windows 8+. So by going into Device Manager and seeing "kedacom USB driver", right click and find the oneplus USB driver you installed above and also need to disable the driver signature enforcement (in windows 10 go to advanced startup settings, reboot and choose (I think) #7 then reboot). Then plug in the phone usb go to device mgr right click on kedacom USB driver and choose the oneplus driver.
I don't have all the steps in the right order but it should fix your issue.
Hello good nights to all, my question is this i have a g4 plus moto (xt1641) which they gave me, the problem is only on the led does not show that this charging, when reading in forums that stay in a brick, but not i could find a solution, i saw videos on youtube that explain how to leave this but the problem is that my pc (with windows 10) does not recognize the device, already install the drivers of motorola and the tutorials and still does not recognize nothing, someone else has happened this or any way to leave and to be able to operate my device, feel if it is a repost and also for my bad english and for writing in capital letters i had not realized.
Are you using a high quality USB data cable, or preferably the original cable that came with the device, and are you connecting to a USB 2.0 port? Also, do you have driver signature enforcement disabled on your Windows 10 PC? Without signature enforcement disabled, the fastboot drivers may not load. Does your computer detect that you've connected the device too (i.e. do you see the device appear in Device Manager, even if it's unrecognised)? Do you have another computer to test with?
Well. First time you must install all need drivers. Second time if your computer does not see it, try another usb or another computer or go to my computer - manage - device manager - maybe usb ports or something, your phone must see as qualcomm driver. If it is not there your comouter must go to test mode on or then off, see only for this reason next topic https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016
Third time you must check your comouter test mode on or off must see your phone as qualcomm driver, try both time. When you will be test mode on or off restart your computer and then connect to cable. If your phone is not died, it must seen as qualcomm driver (first time maybe computer will say many times Usb do not recognize or something, this is good news, then you try that your phone seen as qualcomm driver)
Fourth time if it happens, you must see this tipic
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
Fifth time you must install adb mininal and fastboot. Then go to c disk, program files and see folder same name and copy this folder to desktop
Sixth time download april security patch files. If it is as .zip, please archive it and copy files to desktop folder adb mininal and fastboot https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Seventh time go to instructions of again this topic (install blankfish.bat and etc)
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761 (go to desktop folder adb and minimal fastboot, press shift and right mouse click, choose open powershall here and wait then for 2-3 minutes) then type in run commands, first 3 you must see up as write bootloader and next many commands you must see down side of this topic
Main is that your computer must read your phone even first time, usb not recognized or somthing, it is good news yellow sign (wait for about 3-4 minutes when you connect your phone) or see in computer > manage > device manager it must be as qualcomm driver. Also need to see you white light that your phone is charging or see computer that it is not dead. If battery is low try charge your phone for 30 minutes