My panasonic Tv have chipset rt2850 .accidently i install tcl tv rom to my tv by pressing power button through usb port.after installation only black with led glow screen. But i unable to install the tv orginal firmware by using power button.
Related
I have acer m500 tablet and it hangs at "Acer" logo screen. The reset button somehow don't work ( I don't feel any button pressurization when I use a paper clip). The tablet dies completely when I press pwr and Vol (+) button and I have to revive it by pressing pwr and middle button. I was told that this tablet has possibility for android os. I purchased mini usb cable from Fry's. Please help me how to flash this tablet into an adroid os. I believe the "meego" production is completely ceased.
We wanted one remote to be able to turn on/off the TV, change inputs and volume, and control the Shield. Never had a problem until the 8.0 upgrade, now the "Enter" button is not accepted by the Hulu app. The arrow buttons work, the Enter button works in other apps, and Hulu accepts Enter from the NVIDIA remote, but for some reason Hulu does not like the Enter button on this particular remote.
This is what we're using:
https://www.amazon.com/gp/product/B01CL3ZXGO/
IR setup is:
Power -> TV Power
Red -> TV Input
Yellow -> TV Volume Down
Blue -> TV Volume Up
The other buttons are non-IR and talk to the Shield.
I found an app that can remap the enter button for a price, but I was wondering if there are any free solutions available? In my opinion this is a bug, and I don't want to pay if Hulu is going to fix the bug.
If u press the home button and the back button together the tv is gone off with the shield same time u most have to setup your tv to be control with shiel remote
Hi, I have had an Eunavi 2DIN radio in the car for some time now OS: KC1D01F1-049-3,0,4,3,5-IVT-20190121 MCU: STM32-20190125-11-KC2-18 The seller sent me a new version of the OS, because Google Play didn't work for me, and when I uploaded it there, after the installation, the radio restarted and didn't start ... Just a black screen when I turned it on.
Does anyone have any idea how to get at least to the Recovery menu ??
just connect a keyboard on BACK SIDE USB it is important front side doesnt work connect via backside usb press ctrl+alt+del device will restart than rapidly pres i key while holding alt + printscreen pray god for me
Hello friends,
I think the TV has Android 9.0 installed - I'm not so sure.
It is this device: Telefunken XU50AJ600 (Amazon)
In any case, due to the small amount of RAM (4GB), I should not only have deactivated but also uninstalled apparently important apps.
The television boots and then the picture remains black - you can still visibly change the volume and click on Mute. Every now and then a message appears in the upper right corner that the memory is running out (I installed Kodi with a large list of films).
If I click the button for YouTube on the remote control, the screen briefly turns light gray and then turns black again.
Since I only use the television 100% with a streaming app, I unfortunately cannot say whether a normal television image (T2 / S2 / Cable) would be running in the background.
Now I would like to completely reset the television - but I can't get into the menu.
Now I have already tried a few things I found about the recovery mode, but I did not get into the recovery mode with any solution.
The television only has one physical button (power).
My approach was:
1) Disconnect the television from the power supply
2) Simultaneously press the “OK” and “Back” buttons on the remote control and also press the physical power button on the television.
3) Provide power to the TV.
2 people press these three buttons all the time. The red LED on the physical power button flashes, but nothing else happens - the television doesn't even turn on.
I suspect it's not the right keyboard shortcut.
I hope someone can help me.
Thank you very much
BR
Werner
I was fiddling with the CEC function to power-on tv with the shield and the screen went blank and now it won't power on. When I press the power button the green light comes on for a second and goes off. I don't have a controller on hand neither the original remote. I am using the mobile shield remote. Is there anything I can do to get it working again . All help highly appreciated. Thank you
18pcs said:
I was fiddling with the CEC function to power-on tv with the shield and the screen went blank and now it won't power on. When I press the power button the green light comes on for a second and goes off. I don't have a controller on hand neither the original remote. I am using the mobile shield remote. Is there anything I can do to get it working again . All help highly appreciated. Thank you
Click to expand...
Click to collapse
Got same issue, did you find a fix?
navrkr said:
Got same issue, did you find a fix?
Click to expand...
Click to collapse
Not yet. Nvidia support also unable to give any solution. For now shield Pro is bricked. If you do find a solution please let me know. Request help from someone who has gone through this nightmare.