Hello guys, i'm ****ed with this...
I bought an Android Head Unit in AliExpress and it doesn't boot any more, so I need to enter in Recovery Mode to Wipe Data or reinstall/update ROM. (Picture Below)
My Android Head Unit is a RK3066 (aliexpress.com/item/Android-4-4-4-Stereo-unversal-car-GPS-of-2-DIN-101mm-176mm-7-inch-navi/2048082018.html) with touch buttons, just a physical reset button.
So I can't enter in the desktop, it just stop in boot logo. How can I enter in Recovery Mode?
Picture: kfdown.a.aliimg.com/kf/UT8ouieXrNbXXagOFbX5.jpg
(Sorry, can't post external links yet, just copy/paste links in browser)
Thank you so much!
SimpleReboot at Play Store?
Sent from my iPhone using Tapatalk
If it's anything like mine, use a pen to press and hold the reset button. While still holding, press and hold the power button for five seconds. Then release the reset button and continue to hold the power button for five seconds. Then finally release the power button.
I am same problem , Are you find answoring?
I have a tesla style unit for the mustang
Model # rkpx3 (all it says)
No physical buttons on the unit except for a pen hole style reset button.
I am trying to boot into recovery mode. Can anyone help?
hi I can help you
pls massage me
@hotaudio. Can you give your solution here please ?
Solution ?
Ranger11x89 said:
I have a tesla style unit for the mustang
Model # rkpx3 (all it says)
No physical buttons on the unit except for a pen hole style reset button.
I am trying to boot into recovery mode. Can anyone help?
Click to expand...
Click to collapse
Hello @Ranger11x89 !!
Do you find a solution ?
Not yet just messaged the gentleman that said he could help
did you find a solution ? im stuck like you are.
ariyano said:
did you find a solution ? im stuck like you are.
Click to expand...
Click to collapse
try long press power button for about 5seconds, then short press the power button ,see if you can enter the recovery mode.
I also have the same problems with the same unit as first guy asked, so how to enter recovery menu?
Same issue here...don't know how to enter into recovery. There is only a small reset button and a mute (sound off) button. Here's a pic. Any help would be appreciated.
Thanks,
Scott
same as the phone... i got into mine with holding power and home button(if you have one)
I have the same problem with model XRC7.1-0035
gunzo71 said:
same as the phone... i got into mine with holding power and home button(if you have one)
Click to expand...
Click to collapse
Unfortunately I have no home button. Just reset and sound off buttons.
Thanks
Did you ever find a solution? I have not physical buttons besides the reset button and I cannot get it to go in recovery mode. I have pressed the reset button for a long period of time. Held it for 20 seconds (then) 3 seconds (then) 1 quick click. nothing has worked. I have an Eincar (Topway!) stereo unit in a bootloop.
cloudd26 said:
Did you ever find a solution? I have not physical buttons besides the reset button and I cannot get it to go in recovery mode. I have pressed the reset button for a long period of time. Held it for 20 seconds (then) 3 seconds (then) 1 quick click. nothing has worked. I have an Eincar (Topway!) stereo unit in a bootloop.
Click to expand...
Click to collapse
Use the tweezers put on place C17 IC (two pin) like in picture attached, make it short circuit until the android unit restart (about 5-7 seconds) and take off the tweezers.
It should restart into recovery
Hope it helps you.
In my case, I did the factory reset unfortunately my H/U got stucked on boot logo. My solution is below.
My H/U is Rockchip
1. Install the driver to ur PC
2. Prepare ROM xxx.img
3. Follow this instructions wiki.radxa.com/Rock/flash_the_image
Hope this will help!!
It worked
jacotreus said:
Use the tweezers put on place C17 IC (two pin) like in picture attached, make it short circuit until the android unit restart (about 5-7 seconds) and take off the tweezers.
It should restart into recovery
Hope it helps you.
Click to expand...
Click to collapse
I have the same problem and C17 IC did the trick. Thank you
I've had an Android head unit in my E46 for about 4 years now and is has been working fine. Got it second hand so no idea what brand it is. All I can say is that it's using a Telechips TCC8900 Evaluation Board. When I switch it on, there's a toggle between the Android "side" of it and the radio, SD card, AUX in side. Recently the Android side starts to boot and then the screen flickers and fades out with these weird black and white patterns, like an old tv switching off. It never boots. The FM "side" boots just fine with no such issues so it doesn't seem to be a screen problem.
I've tried hitting the rest button, holding the reset button, holding the reset button with a combination of other buttons but nothing is working.
I know the info is scant but if anyone has any ideas, I'd really appreciate some help.
I started this thread in order to help myself and others get their Steering Wheel Controls working. I'll start off with my setup:
2007 Chevy Silverado Extended Cab ON-STAR, No BOSE, No Amp
Axxess GMOS-LAN-012 GM LAN29 Data OnStar, Satellite, Chime Retention Interface
Axxess ASWC Steering Wheel Control Adapter
Connections made:
Pink from Axxess Interface > Pink Axxess ASWC (Pin7)
Pink from Joying (Key 2) > Pink from 3.5mm Jack (Cut Plug) Axxess ASWC
Brown from Joying (Key 1) > White from 3.5mm Jack (Cut Plug) Axxess ASWC
ASWC Red and Black goes to Interface Red and Black (ACC Power and Ground)
Programming:
Ign ON / Radio booted (Give it 15-20 sec after boot to load all apps)
Press the RESET on the ASWC for 2-5 seconds and release (hold for no more than 10 sec or you will be in manual programing mode)
LED on the ASWC should be flashing rapidly
Almost immediately after releasing the RESET button start pressing the VOL + on your steering wheel repeatedly until the LED turns off
The LED should remain off for 1-2 seconds then flash 7 times (Car detected on Pin 7 Pink) and pause.
The LED should now blink 1 time (Radio HU detected type 1 Eclispe)
The LED should now be ON (Not Flashing)
You may have to do this a couple of times to get the timing right.
Using the steps above NOT all but some of the buttons started working.
VOL+, VOL-, SOURCE, UP, DOWN
You can now map those keys to various Radio functions under Settings -> Car -> Steering Wheel
I tried to go into manual mode on the ASWC to assign all the buttons but at least according to their instructions never could get it to detect anything. Might be because of the way the Axxess interface retains ONSTAR etc... who knows...
Anyway hope this helps someone.
Fyi tried the PAC SWI JACK adapter could not get it to detect anything. I tried all radios.
Sent from my SM-N910P using Tapatalk
i got my Joying as a Jeep specific model, so the SWC worked right out of the box. However i recall reading about other people setting up various other head units on Jeep forums, and the name "Axxess ASWC" seems to ring a bell with people not getting them to work
Maybe they will come out with a Silverado or GM version... I'm good with what I have. Vol+ Vol- Source/ (Long Press HOME) Scan up Reassigned Scan Down to MUTE
Ok, apparently there is no recovery mode for the device or any other similar unbranded devices. The only way to fix firmware or any other issues is to flash it directly using the sequence below, especially if you don't have physical buttons. Make sure you have the firmware in a usb drive directly plugged in without extension cable, or using sd card slot.
Turn off the power to the HU, then press reset button, and keep it pressed. Then turn on the power, the illumination should remain dark at this moment due to the reset button is still pressed. After 3 secs, release the reset button, and immediately when the HU start to illuminates, turn off the power, then turn it back on in quick succession. The screen should show start update, and the progress will be shown on the screen.
You don't need to take the device out from your car. Just turn the key slightly, no need to turn on the ignition, to turn the power on.
Hope it helps somebody.
Hi guys,
Any idea how to enter recovery mode with this hu? It does not have physical buttons. Pressing reset button for few seconds did nothing. Thx in advance.
Hi, i have a problem with my unit: JY-UOS03P4 (4GB px5 android 8)
When the unit is long time off, when i turn it on, the touch screen and the physic buttons don't work, only works the steering wheel buttons. For what i have to Reset the unit and loste all the FM frequencies....
Any idea of what i can do?
And some option to keep off the unit when i start the engine of the car and only turn it on when i press the power button?
Sorry for my english.