Database Users

T-Mobile wing - Broken LCD screen

I some how managed to break my phone's LCD screen. Not sure how it happened... I swear. I called T-Mobile hoping for a replacement and as expected they courteously asked me go F#%K myself. It's almost a new phone so I'm not willing to give up on it.
So now, I'm looking for a way to fix it. First, I want to know where I can find a compatible LCD screen for a descent price. The once I've come across so far are more than $100. And second, instructions on how to replace the screen.
Any help with this will be truly appreciated.
Thanks!

Anyone ever figure out the replacement process? My daughter broke hers yesterday.
Thanks

when you order a screen..it should come with tools.
you use those to remove the housing..
then you basically unplug the old LCD touch display and plug in the new one..
i think.

I saw the higher priced lcd's on ebay that included tools & instructions. I basically have the tools I need. I would just like to have the instructions and an lcd. Wny are things like this so hard to find nowadays.

foltz61 said:
I saw the higher priced lcd's on ebay that included tools & instructions. I basically have the tools I need. I would just like to have the instructions and an lcd. Wny are things like this so hard to find nowadays.
Click to expand...
Click to collapse
I have the instruction on how to do replacement for LCD (t-mobile wing) only to take out screws and if your not aware of every detailed of what your doing your probably end up killing your WING

Go on ebay and look for a ebay seller by the name of lcd4pda. I talked to him in email about the lcd screen, he has the tmobile wing lcd in stock with tools and instructions. 65.00 to 85 bux to get one and it comes with the digitaltizer on it which my wing has a hole in the digitalizer and i have to order a new lcd, hes my best bet.

New LCD, still not working
I dropped my Wing a week ago and it seemed fine. Put it in my pocket and then took it out a couple hours later and the screen had about 4 cracks in it. I assumed it was because I had dropped it earlier. The screen was white except for some blue areas where the cracking was most severe.
I ordered a brand new replacement LCD screen on ebay and just finished installing it. To my utter dismay the screen is still completely white!! It seems to respond to my touch (it goes brighter when I touch it), and it turns on and off w/ the power switch, but there is nothing but white on the screen.
Is it possible I got the connection loose when I installed it? Or is it likely there's something else wrong with my phone? Thanks in advance for any help.

It's probably a bad connection. Did you ever think you'd have to go through so much disassembly to replace the screen? Just so everyone knows, lcd4pda is legit.
Edit: Shipping was extremely high ($16.99). The location on eBay is shown as Canada but, it comes from Virginia. via First Class. I checked shipping to my location on the USPS site. It only cost $1.98. The package weight is 6oz.

Tell me about it! I had to practically start taking photographs to remember where all of the pieces and screws went. I dropped one of the screws on the ground and it took me 10 minutes to find . I'll disassemble again later tonight and refit all of the connections to see if that makes a difference. I sure hope so.
For those replacing their screens, the service manual:
http://www.modaco.com/content/Pocke...58716/HTC-Service-Manuals-Dismantling-Guides/
has a good set of instructions on how to disassemble the Wing. The hardest part is when you have to use a credit card or something similar to unseat the keyboard. You actually have to insert the card or other plastic tool between the edge of the keyboard and the edge of the phone. The pictures confused me because it seemed like I was supposed to insert the card flat into the side of the phone but really, if your phone is sitting on top of the table, you actually insert the card DOWN into this small space.
Also, for those that are new to removing the connections that are in the phone (like I was), there is usually some tape that you have to first remove before you can unhook the connection.

It worked! The connection from the screen to the phone, the one underneath the RF board, wasn't pushed in quite far enough. I reseated it and voila! I now have a working phone again that can not only receive calls but can make them now!
Now that I know it works, I can also recommend seller superpc168 on ebay. $49.75 for the screen and I spent $15 for 2-day UPS shipping.

Thanks cracula. Just ordered a screen on ebay. Hopefully I should be able to fix my phone.

still have white screen.
does anyone know what i can do to fix that. i tried reseating everything but it seems to still have the white screen. any help will be appreciated.

Replacement Wing Lcd
I got a Replacement LCD for my WING for $55 at WWW.HTCLCD.COM

..........

The weirdest thing!
I found the manual through various places including here on the site. With the manual every thing went fine. EXCEPT THAT NOW THE MAJORITY OF THE KEYBOARD BUTTONS AREN'T WORKING. It must be a faulty connection on my part of course. I'm gonna give it another shot tonight and see if it works a gain. I found the screen on the fonlogix site(blackberry8100parts.com).

Broken lcd tmobile wing
i just had my wing lcd screen fixed but by someone who doesn't work for tmobile he fixes phones and installs iphone programs on them also.. He charged me $100 to fix my lcd screen, tmobile wanted between $150 to $250 to fix it i told tmobile screw it i'll find somwhere and i did.. If you can find an outside source to fix your phone do so..

i broke my screen on my tmobile wing a while back.....was taking a 7 hour drive and the phone was sitting on the passenger seat in the sun for a few hours, later on that evening i picked it up and noticed i had a nice big crack on the screen from top to bottom somehow
called tmobile, they told me i had been paying the insurance they gave me the phone # to the insurance people, called them....paid a $100 deductible and got a brand new replacement wing
never thought i'd use the insurance, glad it came handy!

if its under warrenty dont tell them its broken say its a bloack screen theyll send you a new one and they will charge you once you send it back 100 dlrs for out of warrenty thats not bad for another phone wing

https://blackberry8100parts.3dcarts...ment-LCD-W-Touch-Screen-Digitizer_p_6-69.html
only $55. they sent me the screen but i had to remind them... a bit slow (nearly 5 days to process the order) but it is good and they provide instructions
https://blackberry8100parts.3dcartstores.com/LCD-Installation-instructions_ep_29.html

Screen Replacement Services
Another option, especially for those not comfortable with tearing apart small electronics, is to have the phone repaired by a professional. I actually own a small company called Jet City Devices that can replace the screen on your T-Mobile Wing. The cost is a lot lower than a new phone and you'll have your phone back - with all of the data in tact - in under a week.
Just an option for those that don't want to spend their time trying to figure out how to fix their Wing themselves.

Hermes hits toilet

OK, it happened. It was powered on, splashed, went under for about 3 seconds and I pulled it out. I immediately pulled the battery and set it out to dry. so now 24 hours later I power it up and .... well the lcd is toast. I can heat everything power up and navigate blindly somewhat. I open the phone and then I hear it dialing numbers randomly.
OK, that is all I can figure out so far. The question is do you guys think it is worth trying to replace the lcd and see if that fixes the majority of the problems or a waste of time?

In the mean time I have ordered a tilt/8925 or whatever they are calling it now.

Ouch...some users say that you need to open it up and clean it with some solution to get rid of the stuff that the water puts on there. I've always been paranoid about that (PDA is the new newpaper in the can...).

Its fairly easy to open, just make sure you download the guides(in wiki under htc service manual). Its a HELL of a lot EASIER if you also have the number 6 torque key... Once you do it you'll see its fairly robust and takes an awful lot of force to break., just follow the steps one at a time and TAKE YOUR TIME cos theres no first prize for flying through the disassembly and finding you forgot to put something back or missed a screw.
Cheers...

Steelpreacher;
Just as a side note; my 8525 has hit water twice! The first time it fell into my garden pond; just barely hit the water when I caught it but it did get wet. After doing 'all the right things', I was in the same boat as you--no lcd; could navigate blindly. Took it apart somewhat and left it open. When I came back to it about 3 weeks later, it was alive and well! Screen was fine and all the keys worked.
If you do buy another phone as I did, keep the other around as a spare and check it again in a month or so. It may surprise you!

I wounder if you use it as toilet paper or what.

Selling?
Would you like to sell it? Coming back from all that damage may be pricy.

Vicious said:
Would you like to sell it? Coming back from all that damage may be pricy.
Click to expand...
Click to collapse
Vulture...

HTC G1 Screen cracked (digitizer) - G1 Parts order

Hi,
I'm new to this forum so i'd like to say hello to everybody first
I have a g1 with the screen cracked. When I say the screen is cracked I mean that upper glass area; The lcd does not seem to be cracked in any way so there is no bleeding at all. Touch still works very well even in the cracked area.
I seem to have come across only 1 ebay auction that was selling a digitizer and everywere is absurdly expensive to buy. Any ideas where i can find one ? At 189$ i'm half way to buying a new phone tbh.
Also I saw in this forum that some people had the same problem and people told them that they would need to replace both lcd AND digitizer, however i clearly saw in the htc dream service manual that they are two separate parts with separate part numbers. Is there some particular reason for this ?
Just to clarify, can any tell me the order in which components are placed in the htc g1 ? Im assuming they are as follows:
Touch Screen Digitizer
LCD Screen
cover and hinge
in that order..Am I right in my assumption ?
Thanks,
Mewt

Bump. I would like to know as well.

Check it out:
This listing just got put up on eBay today. This guy has 50 digitizers for sale:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=230336383436

If you are sure the LCD is intact, you should just buy the Digitizer. The LCD can easily be seen by opening up the phone.
http://cgi.ebay.com/HTC-T-MOBILE-GO...5|66:2|65:12|39:1|240:1318|301:1|293:1|294:50

I can confirm you can replace the digitizer WITHOUT replacing the lcd.
I just did it. A car ran over my G1 a while ago and I've been lurking on ebay ever since waiting for digitizers to be listed. With a new digitizer, a Torx screwdriver and about an hour I have just replaced the broken one and the new one works perfectly.
Of course that also means I now have a spare G1 since I bought another one in case I couldn't get a replacement.

I will be doing the same shortly.
Actually this is the best price I have found on a digitizer
http://www.perfectesell.com/gog1glscdico.html
Any tips on replacing the part? Does the phone have to come completely apart?

I can't buy from that buyer as he doesn't ship to Malta but thanks, now I know what I need to look for and will be doing so. Hope I can get my g1 working well again...I just hate trying to read messages with cracks in them
Thanks all for your replies

Its quite fiddly but as long as you have the manual you should be okay.
There's a few things tho. Page 23 doesn't really show you how to disconnect the camera very well. On the underside of the main board there is a connector like the one for the screen. It is released by flipping the paddle lever think 90 degrees down. Otherwise the camera connector gets pulled out when you remove the mainboard.
It should go without saying you don't need to disassemble the bottom "chin" part when you remove it. Oh and page 24 has an error, those aren't the 2 screws you need to remove, its 2 long ones, one is in the top right of that picture on page 24 the other is to the right of the one circled.

Mr_dev said:
Its quite fiddly but as long as you have the manual you should be okay.
There's a few things tho. Page 23 doesn't really show you how to disconnect the camera very well. On the underside of the main board there is a connector like the one for the screen. It is released by flipping the paddle lever think 90 degrees down. Otherwise the camera connector gets pulled out when you remove the mainboard.
It should go without saying you don't need to disassemble the bottom "chin" part when you remove it. Oh and page 24 has an error, those aren't the 2 screws you need to remove, its 2 long ones, one is in the top right of that picture on page 24 the other is to the right of the one circled.
Click to expand...
Click to collapse
hey would you say the average person would be able to change the digitizer or do you have to be a handy man.. taking anybodys replys ONLY if you''ve done it

Well I guess I am the average person but then I've taken many a pc and laptop apart and put it back together again so maybe not...
There's nothing that requires great skill in it. As long as you're gentle, patient and careful (taking apart a G1 is like making love to a beautiful woman...). Keep track of what screws came from where and don't try and force anything.
Remember you need some torx head screwdrivers. but you can get these on ebay for very little.
I have to admit I feel a bit smug when I see forum posts from people who advise you sent it back to T-Mo and pay a $100+ excess for them to do it. As if!

Ah, my screen is just gently scratched, but it's annoying sometimes. I might look at into this if it gets any worse.
Just looking at the back of the screen when the G1 is open, it looks like I'd have to take the whole phone apart...are there guides I can look at?

Here is some sites that helped me out.
This is an easy to ready explanation to what you are looking at.
http://www.phonewreck.com/wiki/index.php?title=T-Mobile_G1
This is where I found the service manual a while back
http://www.intomobile.com/2008/12/18/dissect-your-t-mobile-g1-with-the-htc-dream-service-manual.html
This was where you can find the digitizer. (I dunno which one it is... but I think its the clearpad) only thing I could not find a match on part numbers anywhere
http://www.synaptics.com/solutions/products
And this is the address and Houston local number for HTC America. (i didnt check the number so i'm 72.34763% sure its right(just do a little social engineering to get to where you need to be.) )
http://maps.google.com/maps?hl=en&i...-95.551229&spn=0.009187,0.015986&z=16&iwloc=A

same boat here. cracked digitizer. seems like the g1 is the only phone, for which you can't buy one.

Mr_dev said:
Well I guess I am the average person but then I've taken many a pc and laptop apart and put it back together again so maybe not...
There's nothing that requires great skill in it. As long as you're gentle, patient and careful (taking apart a G1 is like making love to a beautiful woman...). Keep track of what screws came from where and don't try and force anything.
Remember you need some torx head screwdrivers. but you can get these on ebay for very little.
I have to admit I feel a bit smug when I see forum posts from people who advise you sent it back to T-Mo and pay a $100+ excess for them to do it. As if!
Click to expand...
Click to collapse
hey i have a question i replace my digitizer but now the bottom part of the touch screen... closest to the menu button doesnt work. what do you think can be wrong

Pull it apart again using the service guide section 2.2.3 and make sure all connections have complete contact. If something is not sitting right the circuit may not be ringing out correctly. Once you have gone through all the steps 2.3.2(lcm assembly) and everything looks connected properly, assemble, reboot and test. If it is not fixed you may have a bad digitizer I'm hoping for the fact that most of your screen is working its just a connection problem.

Mr_dev said:
Its quite fiddly but as long as you have the manual you should be okay.
There's a few things tho. Page 23 doesn't really show you how to disconnect the camera very well. On the underside of the main board there is a connector like the one for the screen. It is released by flipping the paddle lever think 90 degrees down. Otherwise the camera connector gets pulled out when you remove the mainboard.
It should go without saying you don't need to disassemble the bottom "chin" part when you remove it. Oh and page 24 has an error, those aren't the 2 screws you need to remove, its 2 long ones, one is in the top right of that picture on page 24 the other is to the right of the one circled.
Click to expand...
Click to collapse
When you reassembled what did you do about the tape and gaskets? Were you able to buy new or did you use something else? Thanks!
Matt

s02mike said:
Here is some sites that helped me out.
This is an easy to ready explanation to what you are looking at.
http://www.phonewreck.com/wiki/index.php?title=T-Mobile_G1
This is where I found the service manual a while back
http://www.intomobile.com/2008/12/18/dissect-your-t-mobile-g1-with-the-htc-dream-service-manual.html
This was where you can find the digitizer. (I dunno which one it is... but I think its the clearpad) only thing I could not find a match on part numbers anywhere
http://www.synaptics.com/solutions/products
And this is the address and Houston local number for HTC America. (i didnt check the number so i'm 72.34763% sure its right(just do a little social engineering to get to where you need to be.) )
http://maps.google.com/maps?hl=en&i...-95.551229&spn=0.009187,0.015986&z=16&iwloc=A
Click to expand...
Click to collapse
i'm willing to try replacing it myself as well and i was wondering how much your purchased your new digitizer for. would the one suggested earlier at this link: http://www.perfectesell.com/gog1glscdico.html be good? it seems a lot cheaper than other ones and i dont want to buy a faulty and cheap one that may not work as well or break. any other tips would be GREATLY appreciated. TIA!

Here's the correct page on the Perfectesell site:
http://www.perfectesell.com/htcgog1glscd.html
Same price ($65) as the ebay auction that ended.
I dunno what that $12.95 thing was... price doesn't seem right for glass, touch sensing wizardry

mattcairns said:
When you reassembled what did you do about the tape and gaskets? Were you able to buy new or did you use something else? Thanks!
Matt
Click to expand...
Click to collapse
Some of the gaskets i didnt fully remove so i just place em down... and some of the tape i didnt reuse.
bloob9 said:
i'm willing to try replacing it myself as well and i was wondering how much your purchased your new digitizer for. would the one suggested earlier at this link: http://www.perfectesell.com/gog1glscdico.html be good? it seems a lot cheaper than other ones and i dont want to buy a faulty and cheap one that may not work as well or break. any other tips would be GREATLY appreciated. TIA!
Click to expand...
Click to collapse
I bought my digitizer on ebay for about 25 dollars i think. then i bought the screwdrive kit for 7 dollars also

s02mike said:
Pull it apart again using the service guide section 2.2.3 and make sure all connections have complete contact. If something is not sitting right the circuit may not be ringing out correctly. Once you have gone through all the steps 2.3.2(lcm assembly) and everything looks connected properly, assemble, reboot and test. If it is not fixed you may have a bad digitizer I'm hoping for the fact that most of your screen is working its just a connection problem.
Click to expand...
Click to collapse
thanx i took it apart again and that fixed it... i have 2 more problems 1 major 1 not. i dont know but i normally got 3g service in my house and now i dont what could b the problem.
second is that the screen doesnt swivel smoothy as before

Broken screen whilst charging? WTF?

As the title suggests, my Elfins LED screen broke whilst on charge.
It was perfectly fine at about midnight. I was using it just fine.
Then i turn the screen off (power button) and place it (gently) on my shelf.
It did not fall off during the night, as it was exactly where i placed it when i woke, except the screen was slightly shattered down the right hand side and the screen colour was completely screwed up.
Im really rather angry about this.
Anyone else had any experience like this?
I have to wait for a while till i can afford a replacement screen.
Then ill have to wait 7-10 days waiting for it to be delivered
Then ill have to risk taking it apart >:C
Not happy :'(

Things do happen and I had a few customers who had no idea how their screens broke.
Screen replacement on Elf is a fairly straightforward procedure and screens are very reasonably priced on eBay. Make sure you unplug the digitizer and don't forget to plug it back in when done.
The best thing to do is to find the Service Manual, it will explain the dismantling procedure.
DON'T PANIC! Good luck

Dude, same problem.
but my screen didnt crack.
Mine problem was, the touchscreen didnt work.
If its under warrenty, its FREE!
Mine was about a week after the warrenty, so i managed to persue the HTC staff and they have replaced for me, free.
Well, Good Luck.

sadly ive had mine over a year now, and i got it second hand in the first place.
Ive already dismantled it, removed the screen & put it back together.
I havent even ordered the replacement screen yet

Order and test it out.
Remember to go for more popular companies, not ebay's.
My friend got 1 from ebay and his LCD looks very bad.

Im now very happy. I ordered a new screen on Ebay. Turned up today.
Just replaced it with no problems and now i have a working Elfin again :3
^___^

Yea, great stuff, nothing wrong with eBay! Oif course if you don't know what you are doing your screen will not look good or if you dont know what to order.
I also got a digitizer from eBay, $15.. replaced it perfect Genuine HTC Screen from Hong Kong.

Perfect!
Problem Solved!

Screen off/black/dead? But onscreen buttons, sound, touch and LED lights work

I have the dreaded S7 that only has the Eng boot image to root it. G930p. I change the wallpaper put it on the charger because the battery was quite low, and came back a few minutes later to a black screen or a completely off screen, but all on-screen touchdowns work, touches work because I can open the lock screen with swiping, and on-screen buttons work because I can turn it off. Also all the LED lights work. Yet I still can't see anything on the screen and I've tried touching all over to see if the brightness may have been turned all the way down. I have read online that when the battery gets too low the screen dims to a certain level until the battery dies or the phone is plugged in. In some cases at the battery is too low the phone fails to wake up when it's plugged in and the screen goes out. Now here's the problem I can't figure out when the phone is in download mode therefore after flashing firmware I can't go through the proper steps of factory resetting the device because I can't see the screen. Now there may be a couple of reasons why this happened one being having used in Xposed module to remove some status bar icons. Now I didn't have issues with the same exact phone on Android 7 with the Xposed module blocking status bar icons so I use the same module for this device which is now on Oreo. However I am used to seeing the screen stay on and a warning pop-up saying the system user interface has crashed and usually that warning presents itself over and over until the status bar icon is replaced. Now I did have to go about a different way of doing this on Oreo. Since turning off data doesn't actually make the data indicator disappear I turned on airplane mode to get rid of it and then made the airplane mode icon disappear because that Xposed module will not make the data icon disappear. I'm willing to do whatever it takes to get this device back I just want someone to tell me the screen is not dead and it's still able to be brought back that would make me happier at this moment.

Hey, i hzve an s7 edge myself i spent the extrra doe and got the one with dual sims and 128gb motherboard as well. It's been my bae ever since. its been tied to me everywhere i go. 3 or four jobs the lake, hiking, skiing, the shower while it was all original She's fell out of my pocket into the toilet while i was bent over cleaning. Don't get me started how many times ive dumped it out of my lap getting out of the car or bed. what im getting at is im not the type of guy to buy a lambo and leave it at home while i take everybodies pink slips with the camero. I bought the one i wanted and i use the **** out of it because i love it. Ill try to shorten this up a bit here. I had my girlfriend cussing me like a moron when i bricked it 10 minutes in to its 1st full charge. But I straightened it out that morning and then i took the plastic off and slapped it in an $80 case because i used to own a umi super and the screen on that thing would break if you laid you hand on it too hard while you were driving and since this phone cost like $400 more i was bound and determined to not break it like the umi. (That phone puts anything ive ever play edwith to shame when it comes to performance but still to this day theres not one case that covers the screen that fits that phone).With the curved screen and that price tag There was no other way to go at the time i know where to get a case to get the job done for much less now but ...Any ways what i first started having problems with was battery life turned charging port problems. Basically kept a clean rom and fresh apps to for the longest time just to keep the damn thing on for a couple of hours at work when. It never lasted more that 4 hours even when it was brand new but if i kept the screen off i could just make it through rush and still have some sort of music or movie the whole time. Eventually it ended up strapped to a power bank because maybe its just me but 3 or 4 hours isnt **** for a phone battery . i mean who buys a mini tv that only plays the shows you like and its backwards compatible all psxsegatendo 1 and 2 games and turns the screen off. battery life to me is how long it will last on high full blast and a little flash light just in case. every thing I read about this thing raved about its all day 2 with the screen off battery life. Talk about everyone being liars my umi had a little bit bigger battery by the specs but it would last like 4 days if it was half dead and i realized i was gonna be in the woods for a while. what i'm getting at is eventually no matter if i kept my storage and apps clean or not the it was gonna be dead real quick if i didnt have it plugged in. No problem i just settled into carring my phone around on a power bank the size of a brick. Talk about rocking it old school. I might as well have been walking around the appartments with the house phone and the dock. Around here if you get your phone fixed you do it yourself or you can just plan on them breaking the damn thing or bugging it or losing it out of spite and after i did the screen on my umi a couple of times i was not looking forward to doing my edges. I wasnt sure it was in my skill set. I'll have you know when my charging cables started going bad so often that i was staked out trying just daring a ***** to get close to my phone you know drawing down on servers at waffle house because i would go take a piss and somebody broke the wire i just bought at the store across the street oh hell no. Somebody was gonna die either some random waitresses or that f**king wire knome that gets me every time slip up and zone out or it was gonna be my phone. so researched a little bit and made a few calls and ihad a tuperware container with $600 worth of screws and stickers. I say it again i have you know when i finally had to replace the battery my phone was in mint condition there wasnt a scratch on it. Except the little bit of paint around the inside of the charge port. And i try not to drop my phone and i put it down if i need to use both hands but it was mint condition after it came back from hell the second or third time before. Turns out when i changed the battery i was back to getting a reasonable 4 hours of screen on time but it didn't take long for me to realize it wasnt a tweeked out waho and it wasnt knomes and it wasnt my power bank ****ting out on the quickcharge port ... I just needed a new charge port.heres where we come back around to your question. I bought one and while i was waiting on it it dawned on me that all i really did was pop the back off i might wanna see how hard it was gonna be to change the charge port. So about the time the package came i finally found a video with somebody that actually doing a good step by step tutorial on changing the charge port. Then needless to say i see why i couldnt find video where somebody only changed the charge port. The only way to do it with out doing super micro soldering is to replace the screen because you have to actually dismantle the screen to get the capacitive buttons out. This is because the are actually on a pcb with the homebutton and then wrapped around the frame then the screen is glued down. the only people i saw get the screen loose from tje glass and frame from whatr i could tell where just lucky and happened to have the camera going when they rolled the dice and either tried to hit that 3 degree sweet spot inbetween burning the leds and the glue not melting.. Or they didnt give a **** about this $600 burner phone because they have a whole room full of them for parts in their daddys dust free glass lab that has has every niche piece of tech for doing the job minus the actual machine at samsung. Oh and dont forget the fat mexican kid that stole a bottle of the adhesive remover made for it god knows who he knows that works there but i have to put him in there even though he didnt risk anything because the internet won't tell you what adhesive they use so good luck figuring it out i tried like 15 different chemicals and hes not gonna tell you either and he made sure to put it in a different bottle so you cant tell from the video. you might keep on being positive and think well i saw new screen s for like 30 dollars 10 if its used but let me tell you they used to be 50 with everything you need to do it fairly easily . Those $10 $15 are at leaste 30 now and they dont come already fastened to a frame and most dont even have the glass that goes over it. All this is assuming that you still have a mint condition untouched screen thats still ok. If you actually need the screen its no skin of your back now that i told you what you are getting into most straightend you out so theres not much trial and error where you spent 50 80 on parts you cant use before you just go ahead and breakdown and buy the whole thing even though the pieces are less than half cost because most people dont have the equipment and know how to properly use them and get the job done right. Now once you sit with this price tag for a while and decide if you guys can get along with each other after that much money comes up missing. It's a piece of cake to change basically the hardest thing is getting some of the cables to actually snap back onto the different pieces. the rest might take you 30 minutes or an hour but its really kindercarden low level difficulty you just have to have a blow drier or hopefully a heat gun. so here it is the original samsung screen is the only one, out of the 4 screens that i got my hands on, that the touch digitizer or whatever still works after the screen is out. The rest must have had the electronics tied together because they would work with just crack but if the screen goes out all the way none of the screens i had were resposive to touch. so try and get that thing re flashed to stock and see if that helps. i doubt it but ive seen it before . Now its been a year since i bought a screen so they may have doubled by now but last time i bought one I got one of what is understood to be one of the better ones actually put together in a factory with the gold foil caps where the different screws go and it wasnt pulled off a parts phone. and the cheapest if could find was $100 and tax and shipping it WAS like 120 american keep in mind 2 or 3 months before that i bought the same thing for $50 to the door frame and all. if i had to do it again i would definatley buy a used original if i could find one with no burn marks. There were hot boys in china selling the **** out of some screens off phones they stole and parted out like a chop shop would do a car. but i couldnt see past the used part the first time i replaced my screen especially since if every thing was as it should be in the world i wouldnt be taking a perfect screen and throwing it in the trash because nobody at any of these 20 something electronic repair places in my town has the nuts to take a soldering gun to my phone an replaceing the port its self. Oh and one more thing dollar for dollar they wanted exactly the same amount of money at the shop to replace the screen if you don't think you can do it they said 120 for an s7 edge. but the piece of mind was well worth doing it yourself once you get into it and see how easily it can be done.
Sincerely Walter,