Database Users

replacing the screen on a HTC 8125 wizard??

Ok, my LCD cracked. I have purchased another one, but I am wondering if anyone can tell me what kind of nightmare I am going to be in for in doing the replacement. (I have a lot of experience in repairing small electrical devices, music equipment, etc... so this isnt my first foray into this type of repair) but I have been looking over this phone, and it doesnt look like its going to be easy by any means, to get the the screen assembly. in fact, it almost looks like I am going to have to go at it through the Back of the phone (pain in the a$$). Any helpfull hints, or tips would be greatly appreciated. I have a couple days to wait, while I wait for my T6 torque driver to come in from order, so I am fishing for tips in the meantime. Thanks in advance!!

Somebody posted a link to a service manual pdf awhile back. I downloaded it then, and I just tried to attach it to this post, but it wouldn't let me. It said upload failed. But if you search around here and at howardforums.com, you'll probably find the original. It detailed the complete disassembly and reassembly of a wizard (actually an HTC Prodigy, but very similar to the Wizard).

You can find the manual at http://www.box.net/public/4enzlr1l8c

excellent, Thanks very much for the manual link, Thats going to come in VERY handy. Thanks again.

Vladpire said:
excellent, Thanks very much for the manual link, Thats going to come in VERY handy. Thanks again.
Click to expand...
Click to collapse
can I ask where you purchased the screen? I just broke mine today.

myssteree said:
can I ask where you purchased the screen? I just broke mine today.
Click to expand...
Click to collapse
You can buy the LCD here:
http://www.pdasmart.com/products/XDH-WZLCDpdaphonehtcmini.htm
Or if (Like me), your touchscreen is broken you can order from Hong Kong:
http://cgi.ebay.com/OEM-Cingular-81...ryZ41343QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Does anyone know how to replace the touchscreen once the LCD is out of the phone????
Steve

Low cost replacement screen...
myssteree said:
can I ask where you purchased the screen? I just broke mine today.
Click to expand...
Click to collapse
I hope this info isnt too late, but I just bought a replacement LCD with the touch screen overlay for my gen 2 cingular 8125 for $65 shipped and insured. I got it off ebay. And that was a buy it now price. Here is a link to there ebay store... http://stores.ebay.com/e2shopstore. And here is an email address I got from him... [email protected]. The replacement LCD with the touch screen overlay for a gen 1 cingular 8125 was $95 shipped and insured.

damn lcd screen.......
anyone know offhand how to tell if your 8125 is gen 1 or 2 without disassembling the damn thing first?

One thing the manual doesn't tell you...
The volume slider tab might be vulnerable to less-than-careful extrication of the board. It's a pretty flimsy piece of plastic when you put pressure on it in a way it wasn't intended....
The other thing I found out is that a wedge shaped plastic tool for the case is a must. I bought one, and I am so, so glad I did. Otherwise you may break the tabs that hold your face plates on, or at least scratch 'em up pretty badly. A cuticle tool (for fingernails) might work pretty well if you don't want to spring (more), as long as the plastic isn't harder than the plastic of the face plates.

Volume slider broken
Blast! Some small metal thing pinged out when I was putting my Wizard back together again, and now my volume slider is flapping about loosely.
The manual has absolutely no detail about how this tiny piece of metal fits back in. Looks like there is a tiny switch with a miniscule vertical slot inside the wizard around that area.

I swear I posted this last night but is not appearing so here goes again:
Has anyone replaced the touchscreen only? Is it hard to separate from the LCD? My MDA had a dead center and I'd like to fix it while spending as little as possible, but if its going to be a problem I'll get the full LCD.

Ok does this version of english bother anyone else?
OEM Cingular 8125 PDA Touch Screen, it does not includes the main LCD. Please according the parts which showing in the item pictures.About my this item,it is just a touch screen, not the full LCD. It is glassy cover on the color LCD. It's for the one whose Dopod 818 i-Mate Jam touch screen was broken, or out of order, we can provide this replacement...So the buyer need not buy a full expensive replacement LCD,just for the touch screen problem...
Last time I bought something on ebay from a guy that talked like this I got a fake h700 that hat the bluetooth range of 2 ft, couldn't even wear my phone on my belt

anyone have the service manual for the cingular 8125? that htc wizard looks different than mine, mine is round? thanks

eddienj said:
anyone have the service manual for the cingular 8125? that htc wizard looks different than mine, mine is round? thanks
Click to expand...
Click to collapse
Towards the beginning of this thread, there is a post with the link to a PDF. I checked it out, and it's for the prodigy but it looks almost exactly like my 8125 wizard.

almost... should taking it apart be the same? I don't want to ruin something, I would prefer to have the manual for my phone exactly.. thanks

Prodigy not exactly same as 8125
Took a good look at the pdf manual for the Prodigy...it's not close enough to the 8125 for me to feel comfortable disassembling the 8125.
I need to replace the clear screen only...got the tools (incl. plastic wedge), but will have to find an 8125 manual first.

The manual is pretty much right on except in one area. For the Wiza200 (t-mobile MDA), the backing is taken off from the back/side areas. For the Wiza100 (Cingular 8125), you need to take it off near the border of the keyboard. I posted some pictures a few months back in this thread: http://forum.xda-developers.com/showthread.php?t=266382
I'm not sure how difficult it is to seperate the LCD and digitizer as I replaced the whole thing. And, as stated before, the volume slider is pretty fragile. It can break if its not seated in the actual button.

have you seen any exact manual, instruction, guide how to do that or just pics?
Thanks,
Tom

My lcd cracked a couple days ago...for no reason...i don't remember dropping it or anything....just have a long crack across the screen.
Now, the left half is black while the right half is barely visible. Paperweight....
Anyone in the NYC can fix this ?

I'll be working on my next week so i'll let you know.
Peace,
Tom

Got sold a broken phone, couple of questions before attempting LCD repair.

I bought a Cingular 8125 from a seller on another forum and it arrived with a broken LCD. Also, the battery is dead and can't be charged. (Not to mention the missing stylus and lots of scratches on the case... all for a "like new" phone... but I digress.)
I was able to borrow a battery from a coworker with the same phone, and it does power on. The screen is all white with multicolored splotched around the cracks in the LCD. I was also able to hook it up via USB and browse it through Activesync, so I'm guessing the phone is running.
Is there any other way I can test that it's going to work before I invest in a new LCD/digitizer? Another coworker mentioned there might be an emulator I could run on my PC to control the device and place calls with it, does such a thing exist?
Finally, does anyone have experience with a particular ebay sell of LCDs that they could recommend? I've seen a bunch listed in the $50-$60 range, including shipping. Does anyone have any suggestions on a source for replacement LCDs other than ebay?
Thanks,
-Brett.

your not sol yet.
Well to answer your questions in order;
Yes there is something that will let you control and make calls useing your computer, its called SOTI Pocket Controller, look for it.
I bought a mda with a broken lcd on purpose cause after looking into it i found that replacing the lcd isn't so hard. i bought my lcd from ebay and my phone is running great ever since the repair. your going to need to get the service manual and a new lcd ofc, also a torx #5 (type of screw driver) and a #0 phillips head.
good luck with your phone
-capn

capncucci said:
Well to answer your questions in order;
Yes there is something that will let you control and make calls useing your computer, its called SOTI Pocket Controller, look for it.
I bought a mda with a broken lcd on purpose cause after looking into it i found that replacing the lcd isn't so hard. i bought my lcd from ebay and my phone is running great ever since the repair. your going to need to get the service manual and a new lcd ofc, also a torx #5 (type of screw driver) and a #0 phillips head.
good luck with your phone
-capn
Click to expand...
Click to collapse
I'll look for a copy of the SOTI Pocket Controller, that's exactly what I was looking for.
I've already downloaded the service manual, I've got the screwdriver, I can pick up a torx.... but what did you mean when you said "and a new lcd ofc"? Is that "a new lcd of course"?
Also, do you remember who you bought the LCD from since you seemed to have a good experience?
Thanks!
-Brett.

!
Glad I could help, yea I meant of course, sorry lol. im 1337.
i cant remeber but it was some random company that sold refurbished lcd's, just pick one that has a good rating and a decent price and hope for the best, sorry its all the advice i can give=/.
good luck!
-capn

Hi pal, try this software, this software allows you to control your phone from pc with mouse and many other things. It is called my mobiler and i use it very often.
1) Connect your phone through AS
2) Let my mobiler install cabinet on your phone
3) Run it an click on the system tray where is the symbol of the phone and cable and select open mobiler, this will show you your screen.

zzoinks said:
I bought a Cingular 8125 from a seller on another forum and it arrived with a broken LCD. Also, the battery is dead and can't be charged. (Not to mention the missing stylus and lots of scratches on the case... all for a "like new" phone... but I digress.)
I was able to borrow a battery from a coworker with the same phone, and it does power on. The screen is all white with multicolored splotched around the cracks in the LCD. I was also able to hook it up via USB and browse it through Activesync, so I'm guessing the phone is running.
Is there any other way I can test that it's going to work before I invest in a new LCD/digitizer? Another coworker mentioned there might be an emulator I could run on my PC to control the device and place calls with it, does such a thing exist?
Finally, does anyone have experience with a particular ebay sell of LCDs that they could recommend? I've seen a bunch listed in the $50-$60 range, including shipping. Does anyone have any suggestions on a source for replacement LCDs other than ebay?
Thanks,
-Brett.
Click to expand...
Click to collapse
Hey Brett, I've got some info you need to look into when buying a replacement lcd, there are two types that i know of, their distinct differences are the fact that one has a black flex cable, and the other has a gold one(One is the first generation lcd, and the other is the second generation). I made the mistake of not opening my 8125 after i bought it the same way you bought yours, with a broken screen... I bought an lcd with a gold ribbon cable(back when they were $90+) and it <i>worked</i> with my 8125 except the colors were mixed a.k.a. not as they should be. I bought another lcd(yes, another $90+ since the seller didn't offer a return policy) which <u>matched</u> the color of the old cracked lcd that came in my 8125(the ribbon/flex cable was black). And all was perfect!
So if you haven't yet, take your 8125 apart and make sure you know what lcd it has. Ebay listing for these lcds are pretty definitive on whether they use an lcd with a black or gold ribbon cable. Good luck!

Thanks for the tip! I was checking them out on ebay and I did notice that some sellers made it clear there was a difference.
I bought a T5 torx driver this weekend and managed to get the back of the phone off, exposing the main board.... but didn't get any further than that. I'll have to check the color of the ribbon before I order.
Do you remember if yours was a refub LCD or not? I've seen all but one seller (who was located in Hong Kong) are selling refub units. I'd prefer a new one, but I also don't want to wait 2 weeks to get something form Hong Kong. Any problems with a refurb?
Thanks,
-Brett.

I'd like to know myself the difference between a refurb unit and a new unit. Maybe they replace the digitizer of faulty lcds and then resell the "fixed" units, or maybe there is some other thing about the lcds that make them impossible to sell as new~
Btw my lcd (as it was claimed by the seller) was new. I got it in the mail from Hong Kong inside of bubble wrap and Hong Kong Newspaper post. I looked at the lcd and it sure <i>looked</i> brand new, new enough to immediately apply a screen protector before i installed it into my pda(so that the screen protector covers ALL of the screen and doesn't miss the corners or the sides, it's the best way to apply a screensaver if you ask me).

Bolik said:
Hi pal, try this software, this software allows you to control your phone from pc with mouse and many other things. It is called my mobiler and i use it very often.
1) Connect your phone through AS
2) Let my mobiler install cabinet on your phone
3) Run it an click on the system tray where is the symbol of the phone and cable and select open mobiler, this will show you your screen.
Click to expand...
Click to collapse
how do I align the screen with this program?

boi said:
how do I align the screen with this program?
Click to expand...
Click to collapse
Download and try this :-

zabardast_1 said:
Download and try this :-
Click to expand...
Click to collapse
Thank you very much!!!
I will try this as soon as I get home.
Boi

zabardast_1 said:
Download and try this :-
Click to expand...
Click to collapse
Thanks for the download

ewww...vista.
i dont even think microsoft really supports vista the way you would like for using your MDA. Best way to do anything to your phone (and what most of these roms seem to require) is Win XP.
For some reason microsoft wanted to change the way things were handled and I for one am not really happy with it.

Figured this might be the best place as ever. Before I part my Wizard and pay some large fee for a 8525.
Has anyone seen problems with the screen flickering and going mostly white/gray (with lines).
I had dropped my phone a few weeks back - I bought a replacement screen on Ebay and swapped it out - worked great for two weeks. All of a sudden, on Saturday night it went from working to just flickering. Could the new LCD's cable have gone bad? Anyone seen this?

KyleK29 said:
Figured this might be the best place as ever. Before I part my Wizard and pay some large fee for a 8525.
Has anyone seen problems with the screen flickering and going mostly white/gray (with lines).
I had dropped my phone a few weeks back - I bought a replacement screen on Ebay and swapped it out - worked great for two weeks. All of a sudden, on Saturday night it went from working to just flickering. Could the new LCD's cable have gone bad? Anyone seen this?
Click to expand...
Click to collapse
I had problems the first time I replaced my screen where I turned it on and it was completely white. Turns out I didn't have the connector properly seated. I took everything apart and made sure to fully seat the cable into the connector close the little clamp securely. After that it worked fine.
It might be worthwhile to take the phone apart again and make sure the ribbon cable connector hasn't come unseated.
Good luck!
-Brett.

zzoinks said:
I had problems the first time I replaced my screen where I turned it on and it was completely white. Turns out I didn't have the connector properly seated. I took everything apart and made sure to fully seat the cable into the connector close the little clamp securely. After that it worked fine.
It might be worthwhile to take the phone apart again and make sure the ribbon cable connector hasn't come unseated.
Good luck!
-Brett.
Click to expand...
Click to collapse
Yeah, I have the phone in pieces right now. I've tried blowing out the connector/etc. Going to try to clean it.
Btw, sorry about the thread hijack. I meant to post this in another thread for Wizard repairs, somehow got sidetracked and dropped it here.

zabardast_1 said:
Download and try this :-
Click to expand...
Click to collapse
Thank you for your help. I have now replaced the LCD from China but the expansion slot would not recognise any card. Did I do something wrong? Thanks in advance.

HTC G1 Screen cracked (digitizer) - G1 Parts order

Hi,
I'm new to this forum so i'd like to say hello to everybody first
I have a g1 with the screen cracked. When I say the screen is cracked I mean that upper glass area; The lcd does not seem to be cracked in any way so there is no bleeding at all. Touch still works very well even in the cracked area.
I seem to have come across only 1 ebay auction that was selling a digitizer and everywere is absurdly expensive to buy. Any ideas where i can find one ? At 189$ i'm half way to buying a new phone tbh.
Also I saw in this forum that some people had the same problem and people told them that they would need to replace both lcd AND digitizer, however i clearly saw in the htc dream service manual that they are two separate parts with separate part numbers. Is there some particular reason for this ?
Just to clarify, can any tell me the order in which components are placed in the htc g1 ? Im assuming they are as follows:
Touch Screen Digitizer
LCD Screen
cover and hinge
in that order..Am I right in my assumption ?
Thanks,
Mewt

Bump. I would like to know as well.

Check it out:
This listing just got put up on eBay today. This guy has 50 digitizers for sale:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=230336383436

If you are sure the LCD is intact, you should just buy the Digitizer. The LCD can easily be seen by opening up the phone.
http://cgi.ebay.com/HTC-T-MOBILE-GO...5|66:2|65:12|39:1|240:1318|301:1|293:1|294:50

I can confirm you can replace the digitizer WITHOUT replacing the lcd.
I just did it. A car ran over my G1 a while ago and I've been lurking on ebay ever since waiting for digitizers to be listed. With a new digitizer, a Torx screwdriver and about an hour I have just replaced the broken one and the new one works perfectly.
Of course that also means I now have a spare G1 since I bought another one in case I couldn't get a replacement.

I will be doing the same shortly.
Actually this is the best price I have found on a digitizer
http://www.perfectesell.com/gog1glscdico.html
Any tips on replacing the part? Does the phone have to come completely apart?

I can't buy from that buyer as he doesn't ship to Malta but thanks, now I know what I need to look for and will be doing so. Hope I can get my g1 working well again...I just hate trying to read messages with cracks in them
Thanks all for your replies

Its quite fiddly but as long as you have the manual you should be okay.
There's a few things tho. Page 23 doesn't really show you how to disconnect the camera very well. On the underside of the main board there is a connector like the one for the screen. It is released by flipping the paddle lever think 90 degrees down. Otherwise the camera connector gets pulled out when you remove the mainboard.
It should go without saying you don't need to disassemble the bottom "chin" part when you remove it. Oh and page 24 has an error, those aren't the 2 screws you need to remove, its 2 long ones, one is in the top right of that picture on page 24 the other is to the right of the one circled.

Mr_dev said:
Its quite fiddly but as long as you have the manual you should be okay.
There's a few things tho. Page 23 doesn't really show you how to disconnect the camera very well. On the underside of the main board there is a connector like the one for the screen. It is released by flipping the paddle lever think 90 degrees down. Otherwise the camera connector gets pulled out when you remove the mainboard.
It should go without saying you don't need to disassemble the bottom "chin" part when you remove it. Oh and page 24 has an error, those aren't the 2 screws you need to remove, its 2 long ones, one is in the top right of that picture on page 24 the other is to the right of the one circled.
Click to expand...
Click to collapse
hey would you say the average person would be able to change the digitizer or do you have to be a handy man.. taking anybodys replys ONLY if you''ve done it

Well I guess I am the average person but then I've taken many a pc and laptop apart and put it back together again so maybe not...
There's nothing that requires great skill in it. As long as you're gentle, patient and careful (taking apart a G1 is like making love to a beautiful woman...). Keep track of what screws came from where and don't try and force anything.
Remember you need some torx head screwdrivers. but you can get these on ebay for very little.
I have to admit I feel a bit smug when I see forum posts from people who advise you sent it back to T-Mo and pay a $100+ excess for them to do it. As if!

Ah, my screen is just gently scratched, but it's annoying sometimes. I might look at into this if it gets any worse.
Just looking at the back of the screen when the G1 is open, it looks like I'd have to take the whole phone apart...are there guides I can look at?

Here is some sites that helped me out.
This is an easy to ready explanation to what you are looking at.
http://www.phonewreck.com/wiki/index.php?title=T-Mobile_G1
This is where I found the service manual a while back
http://www.intomobile.com/2008/12/18/dissect-your-t-mobile-g1-with-the-htc-dream-service-manual.html
This was where you can find the digitizer. (I dunno which one it is... but I think its the clearpad) only thing I could not find a match on part numbers anywhere
http://www.synaptics.com/solutions/products
And this is the address and Houston local number for HTC America. (i didnt check the number so i'm 72.34763% sure its right(just do a little social engineering to get to where you need to be.) )
http://maps.google.com/maps?hl=en&i...-95.551229&spn=0.009187,0.015986&z=16&iwloc=A

same boat here. cracked digitizer. seems like the g1 is the only phone, for which you can't buy one.

Mr_dev said:
Well I guess I am the average person but then I've taken many a pc and laptop apart and put it back together again so maybe not...
There's nothing that requires great skill in it. As long as you're gentle, patient and careful (taking apart a G1 is like making love to a beautiful woman...). Keep track of what screws came from where and don't try and force anything.
Remember you need some torx head screwdrivers. but you can get these on ebay for very little.
I have to admit I feel a bit smug when I see forum posts from people who advise you sent it back to T-Mo and pay a $100+ excess for them to do it. As if!
Click to expand...
Click to collapse
hey i have a question i replace my digitizer but now the bottom part of the touch screen... closest to the menu button doesnt work. what do you think can be wrong

Pull it apart again using the service guide section 2.2.3 and make sure all connections have complete contact. If something is not sitting right the circuit may not be ringing out correctly. Once you have gone through all the steps 2.3.2(lcm assembly) and everything looks connected properly, assemble, reboot and test. If it is not fixed you may have a bad digitizer I'm hoping for the fact that most of your screen is working its just a connection problem.

Mr_dev said:
Its quite fiddly but as long as you have the manual you should be okay.
There's a few things tho. Page 23 doesn't really show you how to disconnect the camera very well. On the underside of the main board there is a connector like the one for the screen. It is released by flipping the paddle lever think 90 degrees down. Otherwise the camera connector gets pulled out when you remove the mainboard.
It should go without saying you don't need to disassemble the bottom "chin" part when you remove it. Oh and page 24 has an error, those aren't the 2 screws you need to remove, its 2 long ones, one is in the top right of that picture on page 24 the other is to the right of the one circled.
Click to expand...
Click to collapse
When you reassembled what did you do about the tape and gaskets? Were you able to buy new or did you use something else? Thanks!
Matt

s02mike said:
Here is some sites that helped me out.
This is an easy to ready explanation to what you are looking at.
http://www.phonewreck.com/wiki/index.php?title=T-Mobile_G1
This is where I found the service manual a while back
http://www.intomobile.com/2008/12/18/dissect-your-t-mobile-g1-with-the-htc-dream-service-manual.html
This was where you can find the digitizer. (I dunno which one it is... but I think its the clearpad) only thing I could not find a match on part numbers anywhere
http://www.synaptics.com/solutions/products
And this is the address and Houston local number for HTC America. (i didnt check the number so i'm 72.34763% sure its right(just do a little social engineering to get to where you need to be.) )
http://maps.google.com/maps?hl=en&i...-95.551229&spn=0.009187,0.015986&z=16&iwloc=A
Click to expand...
Click to collapse
i'm willing to try replacing it myself as well and i was wondering how much your purchased your new digitizer for. would the one suggested earlier at this link: http://www.perfectesell.com/gog1glscdico.html be good? it seems a lot cheaper than other ones and i dont want to buy a faulty and cheap one that may not work as well or break. any other tips would be GREATLY appreciated. TIA!

Here's the correct page on the Perfectesell site:
http://www.perfectesell.com/htcgog1glscd.html
Same price ($65) as the ebay auction that ended.
I dunno what that $12.95 thing was... price doesn't seem right for glass, touch sensing wizardry

mattcairns said:
When you reassembled what did you do about the tape and gaskets? Were you able to buy new or did you use something else? Thanks!
Matt
Click to expand...
Click to collapse
Some of the gaskets i didnt fully remove so i just place em down... and some of the tape i didnt reuse.
bloob9 said:
i'm willing to try replacing it myself as well and i was wondering how much your purchased your new digitizer for. would the one suggested earlier at this link: http://www.perfectesell.com/gog1glscdico.html be good? it seems a lot cheaper than other ones and i dont want to buy a faulty and cheap one that may not work as well or break. any other tips would be GREATLY appreciated. TIA!
Click to expand...
Click to collapse
I bought my digitizer on ebay for about 25 dollars i think. then i bought the screwdrive kit for 7 dollars also

s02mike said:
Pull it apart again using the service guide section 2.2.3 and make sure all connections have complete contact. If something is not sitting right the circuit may not be ringing out correctly. Once you have gone through all the steps 2.3.2(lcm assembly) and everything looks connected properly, assemble, reboot and test. If it is not fixed you may have a bad digitizer I'm hoping for the fact that most of your screen is working its just a connection problem.
Click to expand...
Click to collapse
thanx i took it apart again and that fixed it... i have 2 more problems 1 major 1 not. i dont know but i normally got 3g service in my house and now i dont what could b the problem.
second is that the screen doesnt swivel smoothy as before

Broken screen whilst charging? WTF?

As the title suggests, my Elfins LED screen broke whilst on charge.
It was perfectly fine at about midnight. I was using it just fine.
Then i turn the screen off (power button) and place it (gently) on my shelf.
It did not fall off during the night, as it was exactly where i placed it when i woke, except the screen was slightly shattered down the right hand side and the screen colour was completely screwed up.
Im really rather angry about this.
Anyone else had any experience like this?
I have to wait for a while till i can afford a replacement screen.
Then ill have to wait 7-10 days waiting for it to be delivered
Then ill have to risk taking it apart >:C
Not happy :'(

Things do happen and I had a few customers who had no idea how their screens broke.
Screen replacement on Elf is a fairly straightforward procedure and screens are very reasonably priced on eBay. Make sure you unplug the digitizer and don't forget to plug it back in when done.
The best thing to do is to find the Service Manual, it will explain the dismantling procedure.
DON'T PANIC! Good luck

Dude, same problem.
but my screen didnt crack.
Mine problem was, the touchscreen didnt work.
If its under warrenty, its FREE!
Mine was about a week after the warrenty, so i managed to persue the HTC staff and they have replaced for me, free.
Well, Good Luck.

sadly ive had mine over a year now, and i got it second hand in the first place.
Ive already dismantled it, removed the screen & put it back together.
I havent even ordered the replacement screen yet

Order and test it out.
Remember to go for more popular companies, not ebay's.
My friend got 1 from ebay and his LCD looks very bad.

Im now very happy. I ordered a new screen on Ebay. Turned up today.
Just replaced it with no problems and now i have a working Elfin again :3
^___^

Yea, great stuff, nothing wrong with eBay! Oif course if you don't know what you are doing your screen will not look good or if you dont know what to order.
I also got a digitizer from eBay, $15.. replaced it perfect Genuine HTC Screen from Hong Kong.

Perfect!
Problem Solved!

MyTouch 3G slide screen not working

Hey guys, I have had this phone since August of 2010 and personally its really nostalgic, in all reality I prefer it over my Galaxy S, Especially for the Slideout keyboard and seems to have better ROM support :/ But around November 2011 the screen would spaz out not respond and just not turn on. Sometimes it would but so dark it was nearly impossible to see it. I'm not sure if the screen is dead I haven't used it since November when I got my Galaxy S. If the screen is dead, is there any type of repair service? or a way to buy a top half for the screen and replace it?

Look on Ebay, there are lots of these phones for cheap.
Sent from my T-Mobile myTouch 3G Slide using xda premium

Sounds like a loose connection on the cable for the screen. I had the same problem with mine. I'm still using this phone now. Free fix if you can figure out how to take the phone apart & basically unplug & re-plug. Be super careful though! And of course it could be a different problem.

You can buy a new one very cheap in amazon or ebay i dont think it worth to repair

Not sure it's the right place to post this, I replaced the digitizer in my old MT3GS (cracked in my pocket), and ever since, Ive have the screen-spazzing issue as well - wasn't my first time replacing a screen, either. For me, the solution _every time_ has been hit the power button to lock the screen, hit it again to get back to what I was doing... Never had to totally power down to fix the spaz :\
If it'd interest you at all, I'd be willing to send you the phone, charger brick, (and the metal case if I can find the damn thing) for $50+ship - thats what I paid for the new digitizer... If you have better troubleshooting skills than I do, good on you, because I've torn this one down and put back together again at least 2 or 3 times since replacing the digitizer, and can't find a single loose connection - maybe you'll have better luck than me?
Thanks
L4T

I called a repair shop I found on craigslist and they mentioned it's more than likely the flex cable, not the lcd screen or glass digitizer. These phones' cables go through lots of wear due to the sliding mechanism. They gave me a 70 dollar estimate, so I just don't slide my phone out anymore to prevent the screen from spazzing out or blacking out for good (it happened to a friend of mine's MTS3g). I've also seen the cable for sale online on ebay or repairsuniverse but I'd rather wait for my full upgrade than invest in it AND risk not fixing it.

I really wanna use this phone again, the slide mechanism is so worn on it you can feel it its kinda tough to do its not springy like it was outta the box, also on ebay these phones still run close to 200 dollars, I would take it apart, as its out of warranty anyways, but I don't have the proper tools to do so, like the mini philips head and the tiny socket wrench. And I hear it is most likely the flex cable but as I said I can't access it.