replacing the screen on a HTC 8125 wizard?? - 8125, K-JAM, P4300, MDA Vario General

Ok, my LCD cracked. I have purchased another one, but I am wondering if anyone can tell me what kind of nightmare I am going to be in for in doing the replacement. (I have a lot of experience in repairing small electrical devices, music equipment, etc... so this isnt my first foray into this type of repair) but I have been looking over this phone, and it doesnt look like its going to be easy by any means, to get the the screen assembly. in fact, it almost looks like I am going to have to go at it through the Back of the phone (pain in the a$$). Any helpfull hints, or tips would be greatly appreciated. I have a couple days to wait, while I wait for my T6 torque driver to come in from order, so I am fishing for tips in the meantime. Thanks in advance!!

Somebody posted a link to a service manual pdf awhile back. I downloaded it then, and I just tried to attach it to this post, but it wouldn't let me. It said upload failed. But if you search around here and at howardforums.com, you'll probably find the original. It detailed the complete disassembly and reassembly of a wizard (actually an HTC Prodigy, but very similar to the Wizard).

You can find the manual at http://www.box.net/public/4enzlr1l8c

excellent, Thanks very much for the manual link, Thats going to come in VERY handy. Thanks again.

Vladpire said:
excellent, Thanks very much for the manual link, Thats going to come in VERY handy. Thanks again.
Click to expand...
Click to collapse
can I ask where you purchased the screen? I just broke mine today.

myssteree said:
can I ask where you purchased the screen? I just broke mine today.
Click to expand...
Click to collapse
You can buy the LCD here:
http://www.pdasmart.com/products/XDH-WZLCDpdaphonehtcmini.htm
Or if (Like me), your touchscreen is broken you can order from Hong Kong:
http://cgi.ebay.com/OEM-Cingular-81...ryZ41343QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Does anyone know how to replace the touchscreen once the LCD is out of the phone????
Steve

Low cost replacement screen...
myssteree said:
can I ask where you purchased the screen? I just broke mine today.
Click to expand...
Click to collapse
I hope this info isnt too late, but I just bought a replacement LCD with the touch screen overlay for my gen 2 cingular 8125 for $65 shipped and insured. I got it off ebay. And that was a buy it now price. Here is a link to there ebay store... http://stores.ebay.com/e2shopstore. And here is an email address I got from him... [email protected]. The replacement LCD with the touch screen overlay for a gen 1 cingular 8125 was $95 shipped and insured.

damn lcd screen.......
anyone know offhand how to tell if your 8125 is gen 1 or 2 without disassembling the damn thing first?

One thing the manual doesn't tell you...
The volume slider tab might be vulnerable to less-than-careful extrication of the board. It's a pretty flimsy piece of plastic when you put pressure on it in a way it wasn't intended....
The other thing I found out is that a wedge shaped plastic tool for the case is a must. I bought one, and I am so, so glad I did. Otherwise you may break the tabs that hold your face plates on, or at least scratch 'em up pretty badly. A cuticle tool (for fingernails) might work pretty well if you don't want to spring (more), as long as the plastic isn't harder than the plastic of the face plates.

Volume slider broken
Blast! Some small metal thing pinged out when I was putting my Wizard back together again, and now my volume slider is flapping about loosely.
The manual has absolutely no detail about how this tiny piece of metal fits back in. Looks like there is a tiny switch with a miniscule vertical slot inside the wizard around that area.

I swear I posted this last night but is not appearing so here goes again:
Has anyone replaced the touchscreen only? Is it hard to separate from the LCD? My MDA had a dead center and I'd like to fix it while spending as little as possible, but if its going to be a problem I'll get the full LCD.

Ok does this version of english bother anyone else?
OEM Cingular 8125 PDA Touch Screen, it does not includes the main LCD. Please according the parts which showing in the item pictures.About my this item,it is just a touch screen, not the full LCD. It is glassy cover on the color LCD. It's for the one whose Dopod 818 i-Mate Jam touch screen was broken, or out of order, we can provide this replacement...So the buyer need not buy a full expensive replacement LCD,just for the touch screen problem...
Last time I bought something on ebay from a guy that talked like this I got a fake h700 that hat the bluetooth range of 2 ft, couldn't even wear my phone on my belt

anyone have the service manual for the cingular 8125? that htc wizard looks different than mine, mine is round? thanks

eddienj said:
anyone have the service manual for the cingular 8125? that htc wizard looks different than mine, mine is round? thanks
Click to expand...
Click to collapse
Towards the beginning of this thread, there is a post with the link to a PDF. I checked it out, and it's for the prodigy but it looks almost exactly like my 8125 wizard.

almost... should taking it apart be the same? I don't want to ruin something, I would prefer to have the manual for my phone exactly.. thanks

Prodigy not exactly same as 8125
Took a good look at the pdf manual for the Prodigy...it's not close enough to the 8125 for me to feel comfortable disassembling the 8125.
I need to replace the clear screen only...got the tools (incl. plastic wedge), but will have to find an 8125 manual first.

The manual is pretty much right on except in one area. For the Wiza200 (t-mobile MDA), the backing is taken off from the back/side areas. For the Wiza100 (Cingular 8125), you need to take it off near the border of the keyboard. I posted some pictures a few months back in this thread: http://forum.xda-developers.com/showthread.php?t=266382
I'm not sure how difficult it is to seperate the LCD and digitizer as I replaced the whole thing. And, as stated before, the volume slider is pretty fragile. It can break if its not seated in the actual button.

have you seen any exact manual, instruction, guide how to do that or just pics?
Thanks,
Tom

My lcd cracked a couple days ago...for no reason...i don't remember dropping it or anything....just have a long crack across the screen.
Now, the left half is black while the right half is barely visible. Paperweight....
Anyone in the NYC can fix this ?

I'll be working on my next week so i'll let you know.
Peace,
Tom

Related

I hate my luck - 2nd Broken Co-ax

Ever get that feeling that someone doesn't like you?
Just now after taking a picture of the keyboard membrane my universals Co-ax cable decided to break, for the second time since I got it in late November
unlike last time though it's not completely broken, the screen only works when the display is twisted (see video), I'm wondering how long it will last like that though
anyone know where i can get a replacement cheap or has a broken universal that I can buy for spares?
thanks
Midget_1990 said:
Ever get that feeling that someone doesn't like you?
Just now after taking a picture of the keyboard membrane my universals Co-ax cable decided to break, for the second time since I got it in late November
unlike last time though it's not completely broken, the screen only works when the display is twisted (see video), I'm wondering how long it will last like that though
anyone know where i can get a replacement cheap or has a broken universal that I can buy for spares?
thanks
Click to expand...
Click to collapse
What the heck are you doing to it??
(swinging from the lid ) )
Bad luck chap
hi midget,
sorry for your bad luck. I have one universal with broken screen. everything else working fine including phone and touch screen. I am in London uk. PM me if it helps.
THX
Joshi
is the screen cracked? or just not displaying anything. if it's the screen thats cracked i would be interested
NO screen not cracked just don't show anything. You can heard the sound when you click on screen.
THX
tinojoshi said:
NO screen not cracked just don't show anything. You can heard the sound when you click on screen.
THX
Click to expand...
Click to collapse
sounds like the same part is broken then... wont be much use

T-Mobile wing - Broken LCD screen

I some how managed to break my phone's LCD screen. Not sure how it happened... I swear. I called T-Mobile hoping for a replacement and as expected they courteously asked me go F#%K myself. It's almost a new phone so I'm not willing to give up on it.
So now, I'm looking for a way to fix it. First, I want to know where I can find a compatible LCD screen for a descent price. The once I've come across so far are more than $100. And second, instructions on how to replace the screen.
Any help with this will be truly appreciated.
Thanks!
Anyone ever figure out the replacement process? My daughter broke hers yesterday.
Thanks
when you order a screen..it should come with tools.
you use those to remove the housing..
then you basically unplug the old LCD touch display and plug in the new one..
i think.
I saw the higher priced lcd's on ebay that included tools & instructions. I basically have the tools I need. I would just like to have the instructions and an lcd. Wny are things like this so hard to find nowadays.
foltz61 said:
I saw the higher priced lcd's on ebay that included tools & instructions. I basically have the tools I need. I would just like to have the instructions and an lcd. Wny are things like this so hard to find nowadays.
Click to expand...
Click to collapse
I have the instruction on how to do replacement for LCD (t-mobile wing) only to take out screws and if your not aware of every detailed of what your doing your probably end up killing your WING
Go on ebay and look for a ebay seller by the name of lcd4pda. I talked to him in email about the lcd screen, he has the tmobile wing lcd in stock with tools and instructions. 65.00 to 85 bux to get one and it comes with the digitaltizer on it which my wing has a hole in the digitalizer and i have to order a new lcd, hes my best bet.
New LCD, still not working
I dropped my Wing a week ago and it seemed fine. Put it in my pocket and then took it out a couple hours later and the screen had about 4 cracks in it. I assumed it was because I had dropped it earlier. The screen was white except for some blue areas where the cracking was most severe.
I ordered a brand new replacement LCD screen on ebay and just finished installing it. To my utter dismay the screen is still completely white!! It seems to respond to my touch (it goes brighter when I touch it), and it turns on and off w/ the power switch, but there is nothing but white on the screen.
Is it possible I got the connection loose when I installed it? Or is it likely there's something else wrong with my phone? Thanks in advance for any help.
It's probably a bad connection. Did you ever think you'd have to go through so much disassembly to replace the screen? Just so everyone knows, lcd4pda is legit.
Edit: Shipping was extremely high ($16.99). The location on eBay is shown as Canada but, it comes from Virginia. via First Class. I checked shipping to my location on the USPS site. It only cost $1.98. The package weight is 6oz.
Tell me about it! I had to practically start taking photographs to remember where all of the pieces and screws went. I dropped one of the screws on the ground and it took me 10 minutes to find . I'll disassemble again later tonight and refit all of the connections to see if that makes a difference. I sure hope so.
For those replacing their screens, the service manual:
http://www.modaco.com/content/Pocke...58716/HTC-Service-Manuals-Dismantling-Guides/
has a good set of instructions on how to disassemble the Wing. The hardest part is when you have to use a credit card or something similar to unseat the keyboard. You actually have to insert the card or other plastic tool between the edge of the keyboard and the edge of the phone. The pictures confused me because it seemed like I was supposed to insert the card flat into the side of the phone but really, if your phone is sitting on top of the table, you actually insert the card DOWN into this small space.
Also, for those that are new to removing the connections that are in the phone (like I was), there is usually some tape that you have to first remove before you can unhook the connection.
It worked! The connection from the screen to the phone, the one underneath the RF board, wasn't pushed in quite far enough. I reseated it and voila! I now have a working phone again that can not only receive calls but can make them now!
Now that I know it works, I can also recommend seller superpc168 on ebay. $49.75 for the screen and I spent $15 for 2-day UPS shipping.
Thanks cracula. Just ordered a screen on ebay. Hopefully I should be able to fix my phone.
still have white screen.
does anyone know what i can do to fix that. i tried reseating everything but it seems to still have the white screen. any help will be appreciated.
Replacement Wing Lcd
I got a Replacement LCD for my WING for $55 at WWW.HTCLCD.COM
..........
The weirdest thing!
I found the manual through various places including here on the site. With the manual every thing went fine. EXCEPT THAT NOW THE MAJORITY OF THE KEYBOARD BUTTONS AREN'T WORKING. It must be a faulty connection on my part of course. I'm gonna give it another shot tonight and see if it works a gain. I found the screen on the fonlogix site(blackberry8100parts.com).
Broken lcd tmobile wing
i just had my wing lcd screen fixed but by someone who doesn't work for tmobile he fixes phones and installs iphone programs on them also.. He charged me $100 to fix my lcd screen, tmobile wanted between $150 to $250 to fix it i told tmobile screw it i'll find somwhere and i did.. If you can find an outside source to fix your phone do so..
i broke my screen on my tmobile wing a while back.....was taking a 7 hour drive and the phone was sitting on the passenger seat in the sun for a few hours, later on that evening i picked it up and noticed i had a nice big crack on the screen from top to bottom somehow
called tmobile, they told me i had been paying the insurance they gave me the phone # to the insurance people, called them....paid a $100 deductible and got a brand new replacement wing
never thought i'd use the insurance, glad it came handy!
if its under warrenty dont tell them its broken say its a bloack screen theyll send you a new one and they will charge you once you send it back 100 dlrs for out of warrenty thats not bad for another phone wing
https://blackberry8100parts.3dcarts...ment-LCD-W-Touch-Screen-Digitizer_p_6-69.html
only $55. they sent me the screen but i had to remind them... a bit slow (nearly 5 days to process the order) but it is good and they provide instructions
https://blackberry8100parts.3dcartstores.com/LCD-Installation-instructions_ep_29.html
Screen Replacement Services
Another option, especially for those not comfortable with tearing apart small electronics, is to have the phone repaired by a professional. I actually own a small company called Jet City Devices that can replace the screen on your T-Mobile Wing. The cost is a lot lower than a new phone and you'll have your phone back - with all of the data in tact - in under a week.
Just an option for those that don't want to spend their time trying to figure out how to fix their Wing themselves.

Got sold a broken phone, couple of questions before attempting LCD repair.

I bought a Cingular 8125 from a seller on another forum and it arrived with a broken LCD. Also, the battery is dead and can't be charged. (Not to mention the missing stylus and lots of scratches on the case... all for a "like new" phone... but I digress.)
I was able to borrow a battery from a coworker with the same phone, and it does power on. The screen is all white with multicolored splotched around the cracks in the LCD. I was also able to hook it up via USB and browse it through Activesync, so I'm guessing the phone is running.
Is there any other way I can test that it's going to work before I invest in a new LCD/digitizer? Another coworker mentioned there might be an emulator I could run on my PC to control the device and place calls with it, does such a thing exist?
Finally, does anyone have experience with a particular ebay sell of LCDs that they could recommend? I've seen a bunch listed in the $50-$60 range, including shipping. Does anyone have any suggestions on a source for replacement LCDs other than ebay?
Thanks,
-Brett.
your not sol yet.
Well to answer your questions in order;
Yes there is something that will let you control and make calls useing your computer, its called SOTI Pocket Controller, look for it.
I bought a mda with a broken lcd on purpose cause after looking into it i found that replacing the lcd isn't so hard. i bought my lcd from ebay and my phone is running great ever since the repair. your going to need to get the service manual and a new lcd ofc, also a torx #5 (type of screw driver) and a #0 phillips head.
good luck with your phone
-capn
capncucci said:
Well to answer your questions in order;
Yes there is something that will let you control and make calls useing your computer, its called SOTI Pocket Controller, look for it.
I bought a mda with a broken lcd on purpose cause after looking into it i found that replacing the lcd isn't so hard. i bought my lcd from ebay and my phone is running great ever since the repair. your going to need to get the service manual and a new lcd ofc, also a torx #5 (type of screw driver) and a #0 phillips head.
good luck with your phone
-capn
Click to expand...
Click to collapse
I'll look for a copy of the SOTI Pocket Controller, that's exactly what I was looking for.
I've already downloaded the service manual, I've got the screwdriver, I can pick up a torx.... but what did you mean when you said "and a new lcd ofc"? Is that "a new lcd of course"?
Also, do you remember who you bought the LCD from since you seemed to have a good experience?
Thanks!
-Brett.
!
Glad I could help, yea I meant of course, sorry lol. im 1337.
i cant remeber but it was some random company that sold refurbished lcd's, just pick one that has a good rating and a decent price and hope for the best, sorry its all the advice i can give=/.
good luck!
-capn
Hi pal, try this software, this software allows you to control your phone from pc with mouse and many other things. It is called my mobiler and i use it very often.
1) Connect your phone through AS
2) Let my mobiler install cabinet on your phone
3) Run it an click on the system tray where is the symbol of the phone and cable and select open mobiler, this will show you your screen.
zzoinks said:
I bought a Cingular 8125 from a seller on another forum and it arrived with a broken LCD. Also, the battery is dead and can't be charged. (Not to mention the missing stylus and lots of scratches on the case... all for a "like new" phone... but I digress.)
I was able to borrow a battery from a coworker with the same phone, and it does power on. The screen is all white with multicolored splotched around the cracks in the LCD. I was also able to hook it up via USB and browse it through Activesync, so I'm guessing the phone is running.
Is there any other way I can test that it's going to work before I invest in a new LCD/digitizer? Another coworker mentioned there might be an emulator I could run on my PC to control the device and place calls with it, does such a thing exist?
Finally, does anyone have experience with a particular ebay sell of LCDs that they could recommend? I've seen a bunch listed in the $50-$60 range, including shipping. Does anyone have any suggestions on a source for replacement LCDs other than ebay?
Thanks,
-Brett.
Click to expand...
Click to collapse
Hey Brett, I've got some info you need to look into when buying a replacement lcd, there are two types that i know of, their distinct differences are the fact that one has a black flex cable, and the other has a gold one(One is the first generation lcd, and the other is the second generation). I made the mistake of not opening my 8125 after i bought it the same way you bought yours, with a broken screen... I bought an lcd with a gold ribbon cable(back when they were $90+) and it <i>worked</i> with my 8125 except the colors were mixed a.k.a. not as they should be. I bought another lcd(yes, another $90+ since the seller didn't offer a return policy) which <u>matched</u> the color of the old cracked lcd that came in my 8125(the ribbon/flex cable was black). And all was perfect!
So if you haven't yet, take your 8125 apart and make sure you know what lcd it has. Ebay listing for these lcds are pretty definitive on whether they use an lcd with a black or gold ribbon cable. Good luck!
Thanks for the tip! I was checking them out on ebay and I did notice that some sellers made it clear there was a difference.
I bought a T5 torx driver this weekend and managed to get the back of the phone off, exposing the main board.... but didn't get any further than that. I'll have to check the color of the ribbon before I order.
Do you remember if yours was a refub LCD or not? I've seen all but one seller (who was located in Hong Kong) are selling refub units. I'd prefer a new one, but I also don't want to wait 2 weeks to get something form Hong Kong. Any problems with a refurb?
Thanks,
-Brett.
I'd like to know myself the difference between a refurb unit and a new unit. Maybe they replace the digitizer of faulty lcds and then resell the "fixed" units, or maybe there is some other thing about the lcds that make them impossible to sell as new~
Btw my lcd (as it was claimed by the seller) was new. I got it in the mail from Hong Kong inside of bubble wrap and Hong Kong Newspaper post. I looked at the lcd and it sure <i>looked</i> brand new, new enough to immediately apply a screen protector before i installed it into my pda(so that the screen protector covers ALL of the screen and doesn't miss the corners or the sides, it's the best way to apply a screensaver if you ask me).
Bolik said:
Hi pal, try this software, this software allows you to control your phone from pc with mouse and many other things. It is called my mobiler and i use it very often.
1) Connect your phone through AS
2) Let my mobiler install cabinet on your phone
3) Run it an click on the system tray where is the symbol of the phone and cable and select open mobiler, this will show you your screen.
Click to expand...
Click to collapse
how do I align the screen with this program?
boi said:
how do I align the screen with this program?
Click to expand...
Click to collapse
Download and try this :-
zabardast_1 said:
Download and try this :-
Click to expand...
Click to collapse
Thank you very much!!!
I will try this as soon as I get home.
Boi
zabardast_1 said:
Download and try this :-
Click to expand...
Click to collapse
Thanks for the download
ewww...vista.
i dont even think microsoft really supports vista the way you would like for using your MDA. Best way to do anything to your phone (and what most of these roms seem to require) is Win XP.
For some reason microsoft wanted to change the way things were handled and I for one am not really happy with it.
Figured this might be the best place as ever. Before I part my Wizard and pay some large fee for a 8525.
Has anyone seen problems with the screen flickering and going mostly white/gray (with lines).
I had dropped my phone a few weeks back - I bought a replacement screen on Ebay and swapped it out - worked great for two weeks. All of a sudden, on Saturday night it went from working to just flickering. Could the new LCD's cable have gone bad? Anyone seen this?
KyleK29 said:
Figured this might be the best place as ever. Before I part my Wizard and pay some large fee for a 8525.
Has anyone seen problems with the screen flickering and going mostly white/gray (with lines).
I had dropped my phone a few weeks back - I bought a replacement screen on Ebay and swapped it out - worked great for two weeks. All of a sudden, on Saturday night it went from working to just flickering. Could the new LCD's cable have gone bad? Anyone seen this?
Click to expand...
Click to collapse
I had problems the first time I replaced my screen where I turned it on and it was completely white. Turns out I didn't have the connector properly seated. I took everything apart and made sure to fully seat the cable into the connector close the little clamp securely. After that it worked fine.
It might be worthwhile to take the phone apart again and make sure the ribbon cable connector hasn't come unseated.
Good luck!
-Brett.
zzoinks said:
I had problems the first time I replaced my screen where I turned it on and it was completely white. Turns out I didn't have the connector properly seated. I took everything apart and made sure to fully seat the cable into the connector close the little clamp securely. After that it worked fine.
It might be worthwhile to take the phone apart again and make sure the ribbon cable connector hasn't come unseated.
Good luck!
-Brett.
Click to expand...
Click to collapse
Yeah, I have the phone in pieces right now. I've tried blowing out the connector/etc. Going to try to clean it.
Btw, sorry about the thread hijack. I meant to post this in another thread for Wizard repairs, somehow got sidetracked and dropped it here.
zabardast_1 said:
Download and try this :-
Click to expand...
Click to collapse
Thank you for your help. I have now replaced the LCD from China but the expansion slot would not recognise any card. Did I do something wrong? Thanks in advance.

HTC G1 Screen cracked (digitizer) - G1 Parts order

Hi,
I'm new to this forum so i'd like to say hello to everybody first
I have a g1 with the screen cracked. When I say the screen is cracked I mean that upper glass area; The lcd does not seem to be cracked in any way so there is no bleeding at all. Touch still works very well even in the cracked area.
I seem to have come across only 1 ebay auction that was selling a digitizer and everywere is absurdly expensive to buy. Any ideas where i can find one ? At 189$ i'm half way to buying a new phone tbh.
Also I saw in this forum that some people had the same problem and people told them that they would need to replace both lcd AND digitizer, however i clearly saw in the htc dream service manual that they are two separate parts with separate part numbers. Is there some particular reason for this ?
Just to clarify, can any tell me the order in which components are placed in the htc g1 ? Im assuming they are as follows:
Touch Screen Digitizer
LCD Screen
cover and hinge
in that order..Am I right in my assumption ?
Thanks,
Mewt
Bump. I would like to know as well.
Check it out:
This listing just got put up on eBay today. This guy has 50 digitizers for sale:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=230336383436
If you are sure the LCD is intact, you should just buy the Digitizer. The LCD can easily be seen by opening up the phone.
http://cgi.ebay.com/HTC-T-MOBILE-GO...5|66:2|65:12|39:1|240:1318|301:1|293:1|294:50
I can confirm you can replace the digitizer WITHOUT replacing the lcd.
I just did it. A car ran over my G1 a while ago and I've been lurking on ebay ever since waiting for digitizers to be listed. With a new digitizer, a Torx screwdriver and about an hour I have just replaced the broken one and the new one works perfectly.
Of course that also means I now have a spare G1 since I bought another one in case I couldn't get a replacement.
I will be doing the same shortly.
Actually this is the best price I have found on a digitizer
http://www.perfectesell.com/gog1glscdico.html
Any tips on replacing the part? Does the phone have to come completely apart?
I can't buy from that buyer as he doesn't ship to Malta but thanks, now I know what I need to look for and will be doing so. Hope I can get my g1 working well again...I just hate trying to read messages with cracks in them
Thanks all for your replies
Its quite fiddly but as long as you have the manual you should be okay.
There's a few things tho. Page 23 doesn't really show you how to disconnect the camera very well. On the underside of the main board there is a connector like the one for the screen. It is released by flipping the paddle lever think 90 degrees down. Otherwise the camera connector gets pulled out when you remove the mainboard.
It should go without saying you don't need to disassemble the bottom "chin" part when you remove it. Oh and page 24 has an error, those aren't the 2 screws you need to remove, its 2 long ones, one is in the top right of that picture on page 24 the other is to the right of the one circled.
Mr_dev said:
Its quite fiddly but as long as you have the manual you should be okay.
There's a few things tho. Page 23 doesn't really show you how to disconnect the camera very well. On the underside of the main board there is a connector like the one for the screen. It is released by flipping the paddle lever think 90 degrees down. Otherwise the camera connector gets pulled out when you remove the mainboard.
It should go without saying you don't need to disassemble the bottom "chin" part when you remove it. Oh and page 24 has an error, those aren't the 2 screws you need to remove, its 2 long ones, one is in the top right of that picture on page 24 the other is to the right of the one circled.
Click to expand...
Click to collapse
hey would you say the average person would be able to change the digitizer or do you have to be a handy man.. taking anybodys replys ONLY if you''ve done it
Well I guess I am the average person but then I've taken many a pc and laptop apart and put it back together again so maybe not...
There's nothing that requires great skill in it. As long as you're gentle, patient and careful (taking apart a G1 is like making love to a beautiful woman...). Keep track of what screws came from where and don't try and force anything.
Remember you need some torx head screwdrivers. but you can get these on ebay for very little.
I have to admit I feel a bit smug when I see forum posts from people who advise you sent it back to T-Mo and pay a $100+ excess for them to do it. As if!
Ah, my screen is just gently scratched, but it's annoying sometimes. I might look at into this if it gets any worse.
Just looking at the back of the screen when the G1 is open, it looks like I'd have to take the whole phone apart...are there guides I can look at?
Here is some sites that helped me out.
This is an easy to ready explanation to what you are looking at.
http://www.phonewreck.com/wiki/index.php?title=T-Mobile_G1
This is where I found the service manual a while back
http://www.intomobile.com/2008/12/18/dissect-your-t-mobile-g1-with-the-htc-dream-service-manual.html
This was where you can find the digitizer. (I dunno which one it is... but I think its the clearpad) only thing I could not find a match on part numbers anywhere
http://www.synaptics.com/solutions/products
And this is the address and Houston local number for HTC America. (i didnt check the number so i'm 72.34763% sure its right(just do a little social engineering to get to where you need to be.) )
http://maps.google.com/maps?hl=en&i...-95.551229&spn=0.009187,0.015986&z=16&iwloc=A
same boat here. cracked digitizer. seems like the g1 is the only phone, for which you can't buy one.
Mr_dev said:
Well I guess I am the average person but then I've taken many a pc and laptop apart and put it back together again so maybe not...
There's nothing that requires great skill in it. As long as you're gentle, patient and careful (taking apart a G1 is like making love to a beautiful woman...). Keep track of what screws came from where and don't try and force anything.
Remember you need some torx head screwdrivers. but you can get these on ebay for very little.
I have to admit I feel a bit smug when I see forum posts from people who advise you sent it back to T-Mo and pay a $100+ excess for them to do it. As if!
Click to expand...
Click to collapse
hey i have a question i replace my digitizer but now the bottom part of the touch screen... closest to the menu button doesnt work. what do you think can be wrong
Pull it apart again using the service guide section 2.2.3 and make sure all connections have complete contact. If something is not sitting right the circuit may not be ringing out correctly. Once you have gone through all the steps 2.3.2(lcm assembly) and everything looks connected properly, assemble, reboot and test. If it is not fixed you may have a bad digitizer I'm hoping for the fact that most of your screen is working its just a connection problem.
Mr_dev said:
Its quite fiddly but as long as you have the manual you should be okay.
There's a few things tho. Page 23 doesn't really show you how to disconnect the camera very well. On the underside of the main board there is a connector like the one for the screen. It is released by flipping the paddle lever think 90 degrees down. Otherwise the camera connector gets pulled out when you remove the mainboard.
It should go without saying you don't need to disassemble the bottom "chin" part when you remove it. Oh and page 24 has an error, those aren't the 2 screws you need to remove, its 2 long ones, one is in the top right of that picture on page 24 the other is to the right of the one circled.
Click to expand...
Click to collapse
When you reassembled what did you do about the tape and gaskets? Were you able to buy new or did you use something else? Thanks!
Matt
s02mike said:
Here is some sites that helped me out.
This is an easy to ready explanation to what you are looking at.
http://www.phonewreck.com/wiki/index.php?title=T-Mobile_G1
This is where I found the service manual a while back
http://www.intomobile.com/2008/12/18/dissect-your-t-mobile-g1-with-the-htc-dream-service-manual.html
This was where you can find the digitizer. (I dunno which one it is... but I think its the clearpad) only thing I could not find a match on part numbers anywhere
http://www.synaptics.com/solutions/products
And this is the address and Houston local number for HTC America. (i didnt check the number so i'm 72.34763% sure its right(just do a little social engineering to get to where you need to be.) )
http://maps.google.com/maps?hl=en&i...-95.551229&spn=0.009187,0.015986&z=16&iwloc=A
Click to expand...
Click to collapse
i'm willing to try replacing it myself as well and i was wondering how much your purchased your new digitizer for. would the one suggested earlier at this link: http://www.perfectesell.com/gog1glscdico.html be good? it seems a lot cheaper than other ones and i dont want to buy a faulty and cheap one that may not work as well or break. any other tips would be GREATLY appreciated. TIA!
Here's the correct page on the Perfectesell site:
http://www.perfectesell.com/htcgog1glscd.html
Same price ($65) as the ebay auction that ended.
I dunno what that $12.95 thing was... price doesn't seem right for glass, touch sensing wizardry
mattcairns said:
When you reassembled what did you do about the tape and gaskets? Were you able to buy new or did you use something else? Thanks!
Matt
Click to expand...
Click to collapse
Some of the gaskets i didnt fully remove so i just place em down... and some of the tape i didnt reuse.
bloob9 said:
i'm willing to try replacing it myself as well and i was wondering how much your purchased your new digitizer for. would the one suggested earlier at this link: http://www.perfectesell.com/gog1glscdico.html be good? it seems a lot cheaper than other ones and i dont want to buy a faulty and cheap one that may not work as well or break. any other tips would be GREATLY appreciated. TIA!
Click to expand...
Click to collapse
I bought my digitizer on ebay for about 25 dollars i think. then i bought the screwdrive kit for 7 dollars also
s02mike said:
Pull it apart again using the service guide section 2.2.3 and make sure all connections have complete contact. If something is not sitting right the circuit may not be ringing out correctly. Once you have gone through all the steps 2.3.2(lcm assembly) and everything looks connected properly, assemble, reboot and test. If it is not fixed you may have a bad digitizer I'm hoping for the fact that most of your screen is working its just a connection problem.
Click to expand...
Click to collapse
thanx i took it apart again and that fixed it... i have 2 more problems 1 major 1 not. i dont know but i normally got 3g service in my house and now i dont what could b the problem.
second is that the screen doesnt swivel smoothy as before

Blackstone Replacement Screen ........ or is it!

Just looking at replacing the screen on my blackstone as I've scratched it to buggery, so was perusing ebay and happened to stumble across this little beauty:
http://cgi.ebay.co.uk/for-HTC-Touch...trkparms=65:12|66:2|39:1|72:1683|293:1|294:50
Really HAD to share this with the community and see how other people react to the fact the screen on this looks like its made out of paper. In fact one edge is bent in the first picture.
...epic lulz.
Also on a side note, can anyone recommend a method for getting the screen replaced cheaply? I'm tempted to call HTC; I'm well within warranty, having only had the phone for 5 months but I know they're gonna charge me an arm and a leg. I see a lot of digitizers on ebay, but not sure if they include the front screen part which I actually need to get rid of the scratches. Any help would be great!
The seller has nearly 10000 positive feed-back and the screen looks fine to me.
Although how someone who needs a new screen because he does not even use a screen protector can describe someone else as an epic failure is beyond me.
heres the service manual, hope be helpful..
enjoy...
http://mikechannon.net/PDF%20Manuals/HTC_Blackstone_Service_Manual.pdf
MaskedMarauder said:
The seller has nearly 10000 positive feed-back and the screen looks fine to me.
Although how someone who needs a new screen because he does not even use a screen protector can describe someone else as an epic failure is beyond me.
Click to expand...
Click to collapse
Yes I noticed the seller has a good positive feedback, but don't you think that the fact it looks like it's made of paper is slightly amusing?
And yes, I didn't use a screen protector... sue me. This is why I was asking for help from a knowledgable community; thanks for the flame and a post of non-useful information.
Cheers for the service manual limx, having a flick through now
I could totally be off because I am new to this techie stuff but the listing says "This is Touch Screen (Digitizer) only, LCD Screen is NOT Included"
Yeah, that is just the digitizer, hence why it is "paper" thin. They are supposed to be!
Dodzey
From my experience, it is really hard to change de digitalizer because it is fixed to the screen. And if you force too much, you will break the screen also...
Just buy the kit screen+digitalizer, easier to replace but also more expansive

Resources