Hermes hits toilet - 8525, TyTN, MDA Vario II, JasJam General

OK, it happened. It was powered on, splashed, went under for about 3 seconds and I pulled it out. I immediately pulled the battery and set it out to dry. so now 24 hours later I power it up and .... well the lcd is toast. I can heat everything power up and navigate blindly somewhat. I open the phone and then I hear it dialing numbers randomly.
OK, that is all I can figure out so far. The question is do you guys think it is worth trying to replace the lcd and see if that fixes the majority of the problems or a waste of time?

In the mean time I have ordered a tilt/8925 or whatever they are calling it now.

Ouch...some users say that you need to open it up and clean it with some solution to get rid of the stuff that the water puts on there. I've always been paranoid about that (PDA is the new newpaper in the can...).

Its fairly easy to open, just make sure you download the guides(in wiki under htc service manual). Its a HELL of a lot EASIER if you also have the number 6 torque key... Once you do it you'll see its fairly robust and takes an awful lot of force to break., just follow the steps one at a time and TAKE YOUR TIME cos theres no first prize for flying through the disassembly and finding you forgot to put something back or missed a screw.
Cheers...

Steelpreacher;
Just as a side note; my 8525 has hit water twice! The first time it fell into my garden pond; just barely hit the water when I caught it but it did get wet. After doing 'all the right things', I was in the same boat as you--no lcd; could navigate blindly. Took it apart somewhat and left it open. When I came back to it about 3 weeks later, it was alive and well! Screen was fine and all the keys worked.
If you do buy another phone as I did, keep the other around as a spare and check it again in a month or so. It may surprise you!

I wounder if you use it as toilet paper or what.

Selling?
Would you like to sell it? Coming back from all that damage may be pricy.

Vicious said:
Would you like to sell it? Coming back from all that damage may be pricy.
Click to expand...
Click to collapse
Vulture...

Related

Dropped Wing in Cup of V-8 Splash Berry Blend

Dropped it right in. Took it out fast and pulled out battery. Whats the chances of survival. I took the phone apart. Cleaned with cutips and blow dried it. Its currently in pieces in bags of rice.
The chances of it working are very slim, honestly I think you just made yourself a $300 paperweight (heard someone else say this thought it was funny) but goodluck though
mesajoejoe said:
Dropped it right in. Took it out fast and pulled out battery. Whats the chances of survival. I took the phone apart. Cleaned with cutips and blow dried it. Its currently in pieces in bags of rice.
Click to expand...
Click to collapse
Hey, keep your fingers crossed. I had a Tmobile MDA and I was on the phone when I was brushing my teeth in the bathroom and I leaned over to dry my hands and yup, you guessed it, dropped it in the toilet! When it fell in, I saw a large spark/flash. (The toilet was clean btw)...so I instantly pulled it out, and pulled the battery out. I left it on a cloth towel, and let it dry out for 4-5 days. To my disbelief, it actually worked again. The only issues I had after that, were 2 of the keyboard letters were hard to press. I mean, you could press them fine, but the letter didn't recognize until you pressed the button with some force. Don't worry too much, but I would definitely let it air dry for atleast a couple days before trying. If there is any water on any of the circuits when you try to power up, that's when you fry stuff! Good luck man!!!
wow what a coincidence running across this thread. I dropped my wing in the toilet last night and I almost cried because I thought it was done for. anyway I quickly pulled it out when it happened and took the battery out as well as my micro sd card and let it all dry for about 6 hours(i know that's not enough time). After I put it back together I was shocked to see that it actually powered up. Everything seemed fine at first but then I opened the start menu it started to cycle through everything on its own so I immediately shut it off and took it apart again and let it dry for 6 more hours. After I let it dry and put it back together it stopped moving on its own and everything works fine now with the exception of the down arrow. it no longer works for some reason and I am referring to the down arrow when the phone is in the closed position(the keyboard not showing). Anyway im thankful that the phone still works and it could have been much worse but not being able to press down in the closed position REALLY sucks. the moral of the story is to take better care of your phone. also, if anyone has an idea of how I can fix my down arrow not working please do tell however im assuming it short circuited or something but any help or advice would be greatly appreciated.
ReDxKinG said:
wow what a coincidence running across this thread. I dropped my wing in the toilet last night and I almost cried because I thought it was done for. anyway I quickly pulled it out when it happened and took the battery out as well as my micro sd card and let it all dry for about 6 hours(i know that's not enough time). After I put it back together I was shocked to see that it actually powered up. Everything seemed fine at first but then I opened the start menu it started to cycle through everything on its own so I immediately shut it off and took it apart again and let it dry for 6 more hours. After I let it dry and put it back together it stopped moving on its own and everything works fine now with the exception of the down arrow. it no longer works for some reason and I am referring to the down arrow when the phone is in the closed position(the keyboard not showing). Anyway im thankful that the phone still works and it could have been much worse but not being able to press down in the closed position REALLY sucks. the moral of the story is to take better care of your phone. also, if anyone has an idea of how I can fix my down arrow not working please do tell however im assuming it short circuited or something but any help or advice would be greatly appreciated.
Click to expand...
Click to collapse
Well, not having your down key def. does suck, but atleast the touch screen works, so you can still use your phone. As far as fixing it, don't really know any way to without cracking it open and doing some doctoring. I know you can use a softkey program and reprogram a different button on the face to act as the down key if you miss it that much. Hope this helps.
Well everything on the phone seems to be working correctly. However if you look at the screen at an angle its crazy looking. Definately some damage was done to the screen but if you look straight at it you wouldnt be able to tell. Maybe in a couple of days ill start to notice some stuff going wrong but so far everything is working. Thank God.
mesajoejoe said:
Well everything on the phone seems to be working correctly. However if you look at the screen at an angle its crazy looking. Definately some damage was done to the screen but if you look straight at it you wouldnt be able to tell. Maybe in a couple of days ill start to notice some stuff going wrong but so far everything is working. Thank God.
Click to expand...
Click to collapse
Yeah, I forgot mine did that too, but I think it was just condensation built up under the screen. That went away on mine, but it took a couple weeks or so. I don't think you will have anything crap out on you. If it hasn't already, I think you are fine.

wet g1?

okay, I put my phone in my coat pocket when it (the coat)was slightly damp for at least 2 hours and later, I found that my phone kept showing the option to power off and my keys werent responding...the keys didnt seem to be stuck...I then wiped then reflashed, which in itself took a good while since my keys werent responding fast enough...but even the reflash didnt work...so did I ruin my phone because of the damp coat? And if so, anybody know how I can fix it? I'm thinking about blow drying my phone...good idea or not?
Don't try to turn the phone on anymore. Remove the battery, battery cover, memory card and SIM card. Place your phone in a bowl of rice to absorb moisture. Sometimes there's just a bit of water left in the system. Let it dry off, phones come back to life most of the time.
SolemnWishing said:
Don't try to turn the phone on anymore. Remove the battery, battery cover, memory card and SIM card. Place your phone in a bowl of rice to absorb moisture. Sometimes there's just a bit of water left in the system. Let it dry off, phones come back to life most of the time.
Click to expand...
Click to collapse
Im going to try this, but just in case anybody else has any ideas, here's a few more details on my phone...it'll turn on, touch screen works, but it's when i use the hard keyboard and press the keys that the option to turn off shows up on the screen...and the phone's green and end keys are flashing on and off like the phone is turning itself on and off, on and off...never seen anything like this on the forums...weird...
naars90 said:
Im going to try this, but just in case anybody else has any ideas, here's a few more details on my phone...it'll turn on, touch screen works, but it's when i use the hard keyboard and press the keys that the option to turn off shows up on the screen...and the phone's green and end keys are flashing on and off like the phone is turning itself on and off, on and off...never seen anything like this on the forums...weird...
Click to expand...
Click to collapse
oh and thanks for the quick response...
No problem. The lights on the buttons going on and off is the water interfering with the circuitry. I highly recommend you leave your phone off, or you run the risk of shorting it out.
If water is making it run wrong, it **IS** shorting out.
my G1 was completely submerged in a lake for 5 minutes while powered on. as soon as it came out of the water i powered off, and blew it dry with an air compressor. left battery out for 24 hours and, worked 95% ever since. only had some random touch screen sensitivity loss.
if you are ok with taking the phone apart and the rice solution doesn't fix it then send me a PM and i'll let you know how to make absolutely sure nothing MORE goes wrong. right now though you probably messed up the phone cause you turned it on and off repeatedly
ok...did the rice solution...didnt work, so does anybody know any good, reliable cellphone repair shops in chicago that does the g1? Googled , found a place called CPR(cellphone repair) but the yelp reviews werent really convincing...so I thought I'd ask the people on here... you guys seem very reliable and I thought I'd rather ask you guys' opinions than go to a repair shop with poor to average reviews...pretty please?
oh, tubaking...ty for the reply...but I looked up the service manual and taking apart the g1 seems to take a lot more skill and experience working with electronics than I have, so that solution's out....thanks a lot anyways....peace, bro
there is no fix for permanant water damage, any shop is just gonna do the same thing i said unless they have access to the main board and all proper pieces to the phone. usually at times like this i go on ebay and buy a real cheap G1 with a broken screen or some other defect that the seller wants to get rid of the phone quickly and cheaply
I left my phone in the rain for a couple of hours and had the same issue. I know this is not the best solution (due to heat) but it fixed mine completely. I removed sdcard, battery, and bback. Then placed it on an egg carton and put in my toaster oven at 150 degrees for an hour or so. Didn't touch it for another day then powered it on. Power button glitched the first time I pressed it but has worked great ever since (been about 3 months)
dumfuq said:
I left my phone in the rain for a couple of hours and had the same issue. I know this is not the best solution (due to heat) but it fixed mine completely. I removed sdcard, battery, and bback. Then placed it on an egg carton and put in my toaster oven at 150 degrees for an hour or so. Didn't touch it for another day then powered it on. Power button glitched the first time I pressed it but has worked great ever since (been about 3 months)
Click to expand...
Click to collapse
That is awesome.
G1 at bottom of lake revived!
I think we should have a sticky to this Thread! Or maybe a a wet willie.
This weekend I dropped my G1 to the bottom of Lake Conroe and was able to fish it out within 5 minutes. Fortunately I was docked in about 6 feet of water. I totally took everything apart and when I got home placed the phone and parts in the direct sun wrapped in a white cloth. I suppose this is equivalent to the egg carton and toaster oven method.
That night, I put the pieces in a box of rice and put it back together in the morning and voila it worked!! For a few hours I had issues with the backlight coming in and out but after about 8 hours of use it works perfectly. I didn't even have to wipe or flash anything - everything like new.
Whew!!!
well, if people stopped playing with there phones and fingering it, it wouldn't get so wet, maybe you should try a personal lube if you can't keep your hands off
gridlock32404 said:
well, if people stopped playing with there phones and fingering it, it wouldn't get so wet, maybe you should try a personal lube if you can't keep your hands off
Click to expand...
Click to collapse
Damn it you beat me to it. I saw the title and said damn this is to easy, wet g1. haahaha.
I dropped my phone in boiled hot dog water and here's what worked for me. I took my phone completely apart and wrapped it up in tin foil. I then put it in the microwave on med-hi for 1:32. Once that is done you take it out and put the phone (disassembled of course) in a bag of bbq potatoe chips (yes it has to be bbq or it won't work) over night. In the mean time you need to feed your dog a snickers bar (this is a must). The next day you need to take magic fairy dust (found a good deal on ebay) and sprinkle it over your g1. Then put your phone back together and slap your momma. Push the power button and bam a perfectly working g1 again. I can write a detailed "how to for dummies" on this if it will get stickied.
supreme, you forgot they need to eat the bbq chips while powering the phone on.
crpercodani said:
supreme, you forgot they need to eat the bbq chips while powering the phone on.
Click to expand...
Click to collapse
Oh yea, I also forgot to mention with a tall glass of chocolate milk.
I'd bump your guide, if I would have had this then I wouldn't have spank the neighbor's wife's ass instead of my momma's, no wonder I still have a wet g1. Wait. What are we talking about, something about crickets and penut butter, I'm confuddle. Oh well back to spanking his wife's ass, mmmm cottage cheese thighs

myTouch Doubles as a Sex Toy

I've had my myTouch for about a month now and have been lurking around the forums for about the same amount of time. With adequate research, I've been able to successfully root, install and run my phone with Maxismo's HERO rom. Successfully meaning have done all that can be with a 4GB class 2 SDHC.
Now to the title. Yesterday morning after a quick McDonalds run, a friend and I decided to post and enjoy our 600 calorie breakfast in the car while I had Pandora running on my Magic through the car audio jack. To no surprise, friend decides that it is a good idea to slide my phone off the armrest, onto the cupholder where a half-filled cup of McD's orange juice parked itself with no cover.. I blame the lady at the drive-thru for not giving us straws. It was in there for a good 5 seconds.
A **** load of used Kleenex's later, I examined the phone and found that the water-damage indicator was still solid white. Aside from the apparent stickier feel, everything seemed fine.. Until I got home. A couple hours later, I reached for my phone to find that it was vibrating. No call, no vmail, not even a text from homegirl to see how my phone was doing. I had tried all the "phone-drying" methods, from Dust-Off to submerging your phone into a bowl of uncooked rice and I still sit here writing this, with my month-old myTouch dancing around my desk like it was happy to see me.
My first question is, has anybody encountered such a problem? If so, has anyone devised a way to remedy this? Second, I have PHP through T-Mobile (phone insurance for those overseas).. Should I just un-root, suck it up and pay the $130 deductible?
I met up with homegirl later on that night and yes, she was happily myTouched.
I shall await replies if any. Thanks for reading.
does the phone still work besides that. cuz if you are going to pay the deductible, i say just report it stolen and pay the fee to get a new one and use the water damaged one as a back up to flash test roms. the only reason you would unroot it and return it is if you are going through warranty, but it would fail, because though the indicator is still white, they open it up and check for water damage there, so you would still have to pay an out of warranty fee, which is like 400 when I had to return my mytouch for warranty purposes.
Just out of curiosity, where is the water indicator?
Also you should leave the phone submerged (cover off and battery off) in rice or packs of silica if you kept those from packaging of electronics for about 2 days. The longer the better. Then see if the phone still works.
Taknarosh said:
Just out of curiosity, where is the water indicator?
Also you should leave the phone submerged (cover off and battery off) in rice or packs of silica if you kept those from packaging of electronics for about 2 days. The longer the better. Then see if the phone still works.
Click to expand...
Click to collapse
Water level indicator is on the lower right hand corner of the battery compartment. It's a round white sticker.
Phone was left (battery and cover off) in a bowl of rice as I mentioned in my post. I think it's the dried up sugar stuck on the board that's causing the phone to act up.. Gives a whole new meaning to "sweet phone".
tazz9690 said:
does the phone still work besides that. cuz if you are going to pay the deductible, i say just report it stolen and pay the fee to get a new one and use the water damaged one as a back up to flash test roms. the only reason you would unroot it and return it is if you are going through warranty, but it would fail, because though the indicator is still white, they open it up and check for water damage there, so you would still have to pay an out of warranty fee, which is like 400 when I had to return my mytouch for warranty purposes.
Click to expand...
Click to collapse
Phone is still running fine aside from being stuck on vibrate.. The volume button seems to be the only other that's acting up but it's sporadic. If I do end up keeping the phone I'll open it up and have a look-see. I imagine it isn't gonna be a walk in the park like my N95.
Good point on the warranty, my friend who works for T-Mobile said I could return it at her store though.. Will they crack it open later on and possibly bill me?
Thanks for the input.
mausheezy said:
Phone is still running fine aside from being stuck on vibrate.. The volume button seems to be the only other that's acting up but it's sporadic. If I do end up keeping the phone I'll open it up and have a look-see. I imagine it isn't gonna be a walk in the park like my N95.
Good point on the warranty, my friend who works for T-Mobile said I could return it at her store though.. Will they crack it open later on and possibly bill me?
Thanks for the input.
Click to expand...
Click to collapse
they send it to their return center and there they open it up. it happened to me on my sidekick. My trackball on it wasn't working so i returned it to warranty. They billed me 3 months later because they said it was an out of warranty product because they found water damage on the inside of the phone and the water damage indicator was still white. I didn't even know that it had water damage when I returned it. It must have gotten water in it when my hands were wet or when I had it in the rain.
Have you tried to turn off the vibrate feature from the settings to see if that turned off the vibrations?
All stickied up is what your volume button is. That is why it is vibrating and why the volume is acting up. The trick would be to get the sticky orange juice out from under your volume rocker. My menu button was sticking so I used a tiny piece of paper to stick in the very tiny gap between button and phone, maybe you will be able to dislodge the sticky stuff. Its a thought.
But insurance wise I think I'd say I lost it at Mcdonalds (snicker).
mausheezy said:
I met up with homegirl later on that night and yes, she was happily myTouched.
Click to expand...
Click to collapse
ROFLMAO!
I agree. Keep the phone and report it stolen.
Had the same thing happen with cranberry and vodka. pull the battery. Get the assembly manual off of the forum. Dissasemble and clean any and all boards with 90% isoproyl alcohol and a childs soft bristle tooth brush. Do not blow on the boards to dry them as condensation can occur. Just use a fan at room temperature. Make sure you don't get a bunch of alcohol in places it won't come out of (speakers, Microphones, any type of button, USE COMMON SENSE), and only use as much as absolutely necesary. I did mine about 24 hours after it happened and it is still working 3 months later. Sugar will kill it eventualy if left inside so it needs to come out. I have had not one single issue since iI cleaned mine. BE VERY GENTLE. There are a total of FOUR liquid indicators on the unit. One in the battery compartment, and two you cant see, and yet another behind the tab for holding a lanyard. If you need better instructions shoot me an e-mail. [email protected]
tazz9690 said:
they send it to their return center and there they open it up. it happened to me on my sidekick. My trackball on it wasn't working so i returned it to warranty. They billed me 3 months later because they said it was an out of warranty product because they found water damage on the inside of the phone and the water damage indicator was still white. I didn't even know that it had water damage when I returned it. It must have gotten water in it when my hands were wet or when I had it in the rain.
Have you tried to turn off the vibrate feature from the settings to see if that turned off the vibrations?
Click to expand...
Click to collapse
Yeah I did and it still did it. I guess warranty exchange is out of the question then.. Thanks again.
Tech no logy said:
All stickied up is what your volume button is. That is why it is vibrating and why the volume is acting up. The trick would be to get the sticky orange juice out from under your volume rocker. My menu button was sticking so I used a tiny piece of paper to stick in the very tiny gap between button and phone, maybe you will be able to dislodge the sticky stuff. Its a thought.
But insurance wise I think I'd say I lost it at Mcdonalds (snicker).
Click to expand...
Click to collapse
Haha. I tried it out with a bunch of post-its and it seems to have alleviated the volume issue slightly. I think I do have to open it up though coz it's still acting up. Thanks for the tips.. Maybe I should blame it on a McDonalds staff member.
softbanksucks said:
ROFLMAO!
I agree. Keep the phone and report it stolen.
Click to expand...
Click to collapse
Haha I think I will.
donepate said:
Had the same thing happen with cranberry and vodka. pull the battery. Get the assembly manual off of the forum. Dissasemble and clean any and all boards with 90% isoproyl alcohol and a childs soft bristle tooth brush. Do not blow on the boards to dry them as condensation can occur. Just use a fan at room temperature. Make sure you don't get a bunch of alcohol in places it won't come out of (speakers, Microphones, any type of button, USE COMMON SENSE), and only use as much as absolutely necesary. I did mine about 24 hours after it happened and it is still working 3 months later. Sugar will kill it eventualy if left inside so it needs to come out. I have had not one single issue since iI cleaned mine. BE VERY GENTLE. There are a total of FOUR liquid indicators on the unit. One in the battery compartment, and two you cant see, and yet another behind the tab for holding a lanyard. If you need better instructions shoot me an e-mail. [email protected]
Click to expand...
Click to collapse
Thanks. You might expect an email from me pretty soon.
mausheezy said:
Yeah I did and it still did it. I guess warranty exchange is out of the question then.. Thanks again.
Click to expand...
Click to collapse
it's a good thing you have insurance then and you told them that you "lost" it or it was "stolen"

Took it apart, put it back together. Somehow it works better just from doing that?

So, took apart my xplay today because my screen was having issues and I wanted to see if a cable was loose.
Couldn't tell what was wrong, so I put it back together.
After putting it back together, I noticed a few things.
1. The power button that had always been loose was suddenly tight and in one spot. I thought the phone was just made that way. Turns out mine was improperly assembled right from the time I opened it. Gotta say, that button is far less annoying now. Anyone else have a loose power button?
2. My battery. Before taking it apart, my battery was at 19%. After putting it back together, suddenly my battery said 43%!! Suddenly it's got more? The heck is going on here?
3. My screen hasn't glitched again so far. Even though I didn't actually do anything other than unplugging/screwing and replugging/screwing some parts.
4. Originally, the left trigger felt "mushy" now it clicks like the right one.
On a side note, after seeing how the slider works on the inside, I recommend ONLY opening the slider when you're actually about to play a game, and not just fiddling around with the phone. The way it's designed makes it very obvious to me that the ribbon connecting the screen to everything else is easily destroyed. It wouldn't surprise me if my screen was having problems because of that ribbon.
Edit: NOPE. It's totally screwed.
Edit again: When the screen is glitching, moving the slider makes it start working some of the time. I'm becoming more and more convinced the ribbon cable inside the slider is the problem.
captain67 said:
EDIT: NOPE. It's totally screwed.
Click to expand...
Click to collapse
LOL
Trolololol .
Can't you find a replacement cable?
I found one online, but I'm flat broke and literally have 1 dollar to my name the next 2 weeks. And my phone company wants what's left over after rent of the next cheque..
I'm gonna try and see if Rogers is stupid enough to give me a new phone without noticing what I did.
Sent from Asgard
Good luck!
captain67 said:
I found one online, but I'm flat broke and literally have 1 dollar to my name the next 2 weeks. And my phone company wants what's left over after rent of the next cheque..
I'm gonna try and see if Rogers is stupid enough to give me a new phone without noticing what I did.
Sent from Asgard
Click to expand...
Click to collapse
Looks like it's ten bucks shipped from ebay:
http://www.ebay.com/itm/SLIDE-SLIDE...572?pt=LH_DefaultDomain_0&hash=item20c4999f34
The only problem would be it'll likely take at least 2-3 weeks for it to come from Hong Kong!

Screen off/black/dead? But onscreen buttons, sound, touch and LED lights work

I have the dreaded S7 that only has the Eng boot image to root it. G930p. I change the wallpaper put it on the charger because the battery was quite low, and came back a few minutes later to a black screen or a completely off screen, but all on-screen touchdowns work, touches work because I can open the lock screen with swiping, and on-screen buttons work because I can turn it off. Also all the LED lights work. Yet I still can't see anything on the screen and I've tried touching all over to see if the brightness may have been turned all the way down. I have read online that when the battery gets too low the screen dims to a certain level until the battery dies or the phone is plugged in. In some cases at the battery is too low the phone fails to wake up when it's plugged in and the screen goes out. Now here's the problem I can't figure out when the phone is in download mode therefore after flashing firmware I can't go through the proper steps of factory resetting the device because I can't see the screen. Now there may be a couple of reasons why this happened one being having used in Xposed module to remove some status bar icons. Now I didn't have issues with the same exact phone on Android 7 with the Xposed module blocking status bar icons so I use the same module for this device which is now on Oreo. However I am used to seeing the screen stay on and a warning pop-up saying the system user interface has crashed and usually that warning presents itself over and over until the status bar icon is replaced. Now I did have to go about a different way of doing this on Oreo. Since turning off data doesn't actually make the data indicator disappear I turned on airplane mode to get rid of it and then made the airplane mode icon disappear because that Xposed module will not make the data icon disappear. I'm willing to do whatever it takes to get this device back I just want someone to tell me the screen is not dead and it's still able to be brought back that would make me happier at this moment.
Hey, i hzve an s7 edge myself i spent the extrra doe and got the one with dual sims and 128gb motherboard as well. It's been my bae ever since. its been tied to me everywhere i go. 3 or four jobs the lake, hiking, skiing, the shower while it was all original She's fell out of my pocket into the toilet while i was bent over cleaning. Don't get me started how many times ive dumped it out of my lap getting out of the car or bed. what im getting at is im not the type of guy to buy a lambo and leave it at home while i take everybodies pink slips with the camero. I bought the one i wanted and i use the **** out of it because i love it. Ill try to shorten this up a bit here. I had my girlfriend cussing me like a moron when i bricked it 10 minutes in to its 1st full charge. But I straightened it out that morning and then i took the plastic off and slapped it in an $80 case because i used to own a umi super and the screen on that thing would break if you laid you hand on it too hard while you were driving and since this phone cost like $400 more i was bound and determined to not break it like the umi. (That phone puts anything ive ever play edwith to shame when it comes to performance but still to this day theres not one case that covers the screen that fits that phone).With the curved screen and that price tag There was no other way to go at the time i know where to get a case to get the job done for much less now but ...Any ways what i first started having problems with was battery life turned charging port problems. Basically kept a clean rom and fresh apps to for the longest time just to keep the damn thing on for a couple of hours at work when. It never lasted more that 4 hours even when it was brand new but if i kept the screen off i could just make it through rush and still have some sort of music or movie the whole time. Eventually it ended up strapped to a power bank because maybe its just me but 3 or 4 hours isnt **** for a phone battery . i mean who buys a mini tv that only plays the shows you like and its backwards compatible all psxsegatendo 1 and 2 games and turns the screen off. battery life to me is how long it will last on high full blast and a little flash light just in case. every thing I read about this thing raved about its all day 2 with the screen off battery life. Talk about everyone being liars my umi had a little bit bigger battery by the specs but it would last like 4 days if it was half dead and i realized i was gonna be in the woods for a while. what i'm getting at is eventually no matter if i kept my storage and apps clean or not the it was gonna be dead real quick if i didnt have it plugged in. No problem i just settled into carring my phone around on a power bank the size of a brick. Talk about rocking it old school. I might as well have been walking around the appartments with the house phone and the dock. Around here if you get your phone fixed you do it yourself or you can just plan on them breaking the damn thing or bugging it or losing it out of spite and after i did the screen on my umi a couple of times i was not looking forward to doing my edges. I wasnt sure it was in my skill set. I'll have you know when my charging cables started going bad so often that i was staked out trying just daring a ***** to get close to my phone you know drawing down on servers at waffle house because i would go take a piss and somebody broke the wire i just bought at the store across the street oh hell no. Somebody was gonna die either some random waitresses or that f**king wire knome that gets me every time slip up and zone out or it was gonna be my phone. so researched a little bit and made a few calls and ihad a tuperware container with $600 worth of screws and stickers. I say it again i have you know when i finally had to replace the battery my phone was in mint condition there wasnt a scratch on it. Except the little bit of paint around the inside of the charge port. And i try not to drop my phone and i put it down if i need to use both hands but it was mint condition after it came back from hell the second or third time before. Turns out when i changed the battery i was back to getting a reasonable 4 hours of screen on time but it didn't take long for me to realize it wasnt a tweeked out waho and it wasnt knomes and it wasnt my power bank ****ting out on the quickcharge port ... I just needed a new charge port.heres where we come back around to your question. I bought one and while i was waiting on it it dawned on me that all i really did was pop the back off i might wanna see how hard it was gonna be to change the charge port. So about the time the package came i finally found a video with somebody that actually doing a good step by step tutorial on changing the charge port. Then needless to say i see why i couldnt find video where somebody only changed the charge port. The only way to do it with out doing super micro soldering is to replace the screen because you have to actually dismantle the screen to get the capacitive buttons out. This is because the are actually on a pcb with the homebutton and then wrapped around the frame then the screen is glued down. the only people i saw get the screen loose from tje glass and frame from whatr i could tell where just lucky and happened to have the camera going when they rolled the dice and either tried to hit that 3 degree sweet spot inbetween burning the leds and the glue not melting.. Or they didnt give a **** about this $600 burner phone because they have a whole room full of them for parts in their daddys dust free glass lab that has has every niche piece of tech for doing the job minus the actual machine at samsung. Oh and dont forget the fat mexican kid that stole a bottle of the adhesive remover made for it god knows who he knows that works there but i have to put him in there even though he didnt risk anything because the internet won't tell you what adhesive they use so good luck figuring it out i tried like 15 different chemicals and hes not gonna tell you either and he made sure to put it in a different bottle so you cant tell from the video. you might keep on being positive and think well i saw new screen s for like 30 dollars 10 if its used but let me tell you they used to be 50 with everything you need to do it fairly easily . Those $10 $15 are at leaste 30 now and they dont come already fastened to a frame and most dont even have the glass that goes over it. All this is assuming that you still have a mint condition untouched screen thats still ok. If you actually need the screen its no skin of your back now that i told you what you are getting into most straightend you out so theres not much trial and error where you spent 50 80 on parts you cant use before you just go ahead and breakdown and buy the whole thing even though the pieces are less than half cost because most people dont have the equipment and know how to properly use them and get the job done right. Now once you sit with this price tag for a while and decide if you guys can get along with each other after that much money comes up missing. It's a piece of cake to change basically the hardest thing is getting some of the cables to actually snap back onto the different pieces. the rest might take you 30 minutes or an hour but its really kindercarden low level difficulty you just have to have a blow drier or hopefully a heat gun. so here it is the original samsung screen is the only one, out of the 4 screens that i got my hands on, that the touch digitizer or whatever still works after the screen is out. The rest must have had the electronics tied together because they would work with just crack but if the screen goes out all the way none of the screens i had were resposive to touch. so try and get that thing re flashed to stock and see if that helps. i doubt it but ive seen it before . Now its been a year since i bought a screen so they may have doubled by now but last time i bought one I got one of what is understood to be one of the better ones actually put together in a factory with the gold foil caps where the different screws go and it wasnt pulled off a parts phone. and the cheapest if could find was $100 and tax and shipping it WAS like 120 american keep in mind 2 or 3 months before that i bought the same thing for $50 to the door frame and all. if i had to do it again i would definatley buy a used original if i could find one with no burn marks. There were hot boys in china selling the **** out of some screens off phones they stole and parted out like a chop shop would do a car. but i couldnt see past the used part the first time i replaced my screen especially since if every thing was as it should be in the world i wouldnt be taking a perfect screen and throwing it in the trash because nobody at any of these 20 something electronic repair places in my town has the nuts to take a soldering gun to my phone an replaceing the port its self. Oh and one more thing dollar for dollar they wanted exactly the same amount of money at the shop to replace the screen if you don't think you can do it they said 120 for an s7 edge. but the piece of mind was well worth doing it yourself once you get into it and see how easily it can be done.
Sincerely Walter,

Categories

Resources