Database Users

ELFin broken screen

Hi, i broke my Elfin display (T-mobile unlocked) my screen looks like this: (touchscreen is still working):
. I think i need the entire screen+digitizer thing and not only the digitizer? therefore this ? http://cnn.cn/shop/touch-screen-p-1900.html

Unlucky
The touch screen has 2 parts. The plastic outer screen is the digitizer and the lcd screen is the one underneath. When you take it appart the digitizer stays in the top of the housing and the lcd is attached to the middle bit.
Looks like you broke the LCD for sure but maybe the digitzer is ok - you will see as soon as you take it apart. The post here about how to disasemble a touch has clear pictures so check it out its quite easy to take apart if you follow the guide.

Yeah that definitely looks like you broke the LCD which is underneath the digitizer. Either take it to a service rep...or if you think you're up to it.....you can attempt to take the phone apart and replace the LCD yourself.

Difference between the lcd and digitizer????

I have sadly broke my screen but it looks fine, it's just the touch not working. Im new at this and I have no clue what the difference is between the lcd and the digitizer. I need to know what to replace on this. please help.

screen and digitizer
the screen is the actual lcd display while the digitizer "touch" part of tthe screen. now i havent replaced the screen on my wing yet but most units the screen and digitzar are one complete unit sometimes the digitizer can be seperated with a razor blade (not recomended) personaly i would replace the entire unit (lcd and digitizer)

Broken LCD

Hello all,
My Touch HD slipped from my hands and ended-up flat on the screen... the screen does not have a scratch, the digitizer still works perfect, but the LCD underneath is broken, so I get a black screen. I can still access the Touch HD via my PC thanks to MyMobilier, though (so why do I complain, huh?!!)!
I ordered a replacement LCD in Hong-Kong (thanks ebay!), got the HTC Service Guide, managed to remove the antenna cover (tough!) and dismantle the whole thing. But NOW I AM STUCK with the 'bezel', i.e. the cover, screen, digitizer, LCD, and metal plate with bolts all apparently glued together.
Anyone faced the same problem? Anyone knows how to separate the LCD from the screen and digitizer?
Cheers,
FroggyZ

Up
Anyone can help with this???

HTC HD2 dropped, Black Screen, but touch and whole phone works well

Hi
I've dropped my HD2. Everything is working, including touch screen, I can unlock the phone, I can answer the call, but screen is black, not broken.
What should I do? Does the lcd screen replacement will be sufficient? In that case, could the screen be ok, but some other display "processor" could be dead? I'm asking because I'll try to this on my own.

Could simply be the lcd cable has slipped slightly but probably more likely an LCD replacement needed.
You need remove rear housing & have a look & make a decision from your findings/testing.

hello
I've got a little update - lcd screen is working well - I mean it displays the image, the only malfunction is backlit. Right now when i use flashlign I can actually see whats on screen. Do you have experience or think that backlit connection can be repaired? Do You have any schematics for hd2' lcd ?

I suspect new LCD required by sounds of it. LCD can not be stripped for repair so after basic inspection of external connection replacement is only solution & not expensive due to falling cost of HD2 parts.

[Q] how to find out if digitizer works properly in broken nexus 7 (2012)

Hi, a few days ago i broke my nexus 7 screen . There is a huge crack on the screen and the touch works only in a small portion of the screen. The display is coming right though. Also, the broken screen seems to be touching the touch somewhere as the device sometimes responds without even touching the screen. How can i check whether i need to replace LCD glass only or i have to replace the glass along with the digitizer?