Database Users

Stuck on SP Screen? THink Its Bricked

Okay it will turn on, and i can plug it in but it wont show up on my computer,
I"m running:
Machine name: 1NF3CT3D-PC
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: NVIDIA
System Model: 132-CK-NF79
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz (4 CPUs), ~2.7GHz
Memory: 2048MB RAM
Available OS Memory: 2046MB RAM
Page File: 1357MB used, 2735MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
When i turn my phone on it sits at the at&t logo screen (solid white with att logo in center) and sits there till i remove the battery
I think i bricked it b.c i installed a new rom, then it started with the problems,
I have tried reset button, i have tried hard reset, i don't know of any other methods, there is no memory card or sim in when trying to boot up, but i installed the rom on the phone memory.
ANY HELP WOULD BE MUCH APPRECIATED. EITHER BY EMAIL OR BY REPLY ([email protected])

KAIZE - 2 DIN Pure Android 4.4.4/RK3188 CarStereo Radio Head Unit

Hi !
I just bought a head unit I founded on AliExpress :
http://www.aliexpress.com/item/Quad...dition-Edge-Fusion-F150-F500/32344021566.html
This one is especially compatible with Ford cars, and it works pretty well with my 2005 Mustang GT.
Here is some informations :
Model n° : S07
MCU : MTCB-KGL-V2.55
Android version : 4.4.4_01062015
Kernel : 3.0.36++
Build number : rk3188-eng4.4.4 01062015.15:09:11
CPU : armv7 1.6GHz (x4)
RAM : Samsung DDR3 1GB
Internal storage : 16Gb
Screen : 1024*600
I founded some issues :
sometimes the storage does not mount at boot (internal / GPS card / Sd card). It's ok if I reset the unit
my android phones are not detected by the head unit (OnePlus and Micromax). They can be charged, but nothing more appens, so it's impossible to try the "mirror link".
Otherwise, it's fine. The audio quality is quite good, my reverse camera is switched on automatically (with the can-bus adapter).
The factory settings are accessible with the usual password "126".

It's seems to be the same as this one : Seicane S127302
http://www.seicane.com/fr/seicane-s...h-3g-wifi-bluetooth-rearview-mirror-lien-obd2
Hardware and software are the same

Bluetooth not working

I have a Verizon Moto Z Force Droid. The bluetooth stopped connecting, and does not display any devices. I've downloaded Bluetooth Box , and it shows the BT MAC address as 02:00:00:00:00:00. This is not the same as the MAC address displayed in the system settings, or when a run shell settings get secure bluetooth_address. Any ideas on how to fix?
Adroid Version:8.0.0
Adroid security patch level: July 1,2018
Configuration version: F16.MOT.XT1650.0
Baseband version: M8996_1239.53.01.126.29.01R GVS
Kernel version: 3.18.71-perf-g4a66e91 [email protected] #1 Fri Jun 29 05:45:52 CDT 2018
Build number: OCLS27.76-69-6

Joying JY-UO135N4G - SC9853i - MCU problem, problem with boot up

Hello!
I am having trouble updating my MCU. I've been randomly losing this driver for a while now. After starting the car, the radio has a problem with starting (android works fine, no sound from the radio) when the MCU starts, the version is unknown. After 5 minutes, the device resets, sometimes the MCU will load and everything works until the car is turned off again.
During the update (SD Card FAT32, empty only with the original files from the joying blog - Trying few others), the information that SDCARD cannot be mounted
It goes to the line where the STM32UD was updated correctly, then the line with the description: "2019.09.07 10:40:57 JY_53_C63L_H32P48F64_Ver: 1.0" - the device is locked here, nothing happens - after 5 minutes, restart the device and loop.
How the device works properly MCU Version is:
2019.09.07 10:40:57 JY_53_C63L_H32P48F64_Ver: 1.0
Any factory reset not working.
CPU Info:
Intel X86_Octa-Coire 1.8Ghz [email protected] + 32 GB
Android 8.1
What should I do, what file should I use? Radio is:
Joying JY-UO135N4G
I don't speak perfect English, I use a translator. For thorough help, sending any files, I am able to use a grant. I am asking for help in solving the problem.
I am asking for information which data is still needed to solve the problem. The device is rotated.
After struggling to start the device, I did not have an MCU, I used Joying Extra Tool and the option -Rebot Option - Soft Reboot (Gui only, sufficient for all apk replacements)
After starting the car, the panel LEDs light up for 2 seconds and then they turn off, the device usually starts after a few minutes, the vehicle's logo is displayed with a countdown from 5 to 0, the device stops on the number 0. I have to hold power off and manually reset the device, then Andorid is charging correctly.
Twice after using it, the device started working properly. The MCU showed up in the settings.
System info:
Kernel: #451 SMP PREEMPT FRI MAR 29 2019
Platform: (24)6313 LF Full band carplay
touch: 911_1060(263efcda)E:0
APP 1024x600 2019-11-28 15:50:42
System 2019-11-28 09:40:06 Thursday

Setting password for AC8227L

Hello everyone.
I've just purchased a new AC8227L head unit for my car and was wondering how to change the boot logo and got stuck with setting password. I tried to used 0000 but not lucky. How can I get the setting password?
Android version: 9.0
Memory: 1.0 GB
Storage: 16 GB
System platform: AC8227L
Build number: ZXDZ_2020.03.18.10
Mcu version: CVD1810-WJ_20.04.15_309
Thanks

Try 000000

Try 000000

haseeb720 said:
Try 000000
Click to expand...
Click to collapse
Yup that works (Y)
Thanks

Password please?

try 12345 or 1234

Nun of the passwords above helped with my car stereo I’m not sure how to get the password