Okay it will turn on, and i can plug it in but it wont show up on my computer,
I"m running:
Machine name: 1NF3CT3D-PC
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: NVIDIA
System Model: 132-CK-NF79
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz (4 CPUs), ~2.7GHz
Memory: 2048MB RAM
Available OS Memory: 2046MB RAM
Page File: 1357MB used, 2735MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
When i turn my phone on it sits at the at&t logo screen (solid white with att logo in center) and sits there till i remove the battery
I think i bricked it b.c i installed a new rom, then it started with the problems,
I have tried reset button, i have tried hard reset, i don't know of any other methods, there is no memory card or sim in when trying to boot up, but i installed the rom on the phone memory.
ANY HELP WOULD BE MUCH APPRECIATED. EITHER BY EMAIL OR BY REPLY ([email protected])
Related
Hi Peeps,
I've been uing my 3300 for quite a while now (O2 branded XDA) with an 8 gig card coupled with SDHC-Artimis drivers (dated Nov 07). I've been experiencing freezes on start up with increasing frequency (it gets as far as the volume sliders and just hangs there) and have decided that a modified ROM could be the way to go, preferably one that has sdhc drivers built in. Incidently, the freezes appear to be related to the use of Copilot - installed on the card - but I could be wrong. Also, hard reset and restore from the most current backup now goes straight to the hanging state Hence the "start from scratch" new ROM thinking.
Currently, on start up, my device reports the following on an O2 branded "Welcome" screen:
IPC 3.04.0001
SPC 3.04.0000
GSM 02.67.90
OS 3.4.0.0
Looking around on the Wiki (wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades) I see that the Latest ROM is 3.15. However, further looking at the page shows that - if I'm reading the table correctly - 3.15 is available in Polish only. The latest HTC WM6 English version appears to be 3.13.405.1. Is that correct? Does this ROM support SDHC? If not what is the latest SDHC driver available for the 3300?
Do I need to do anything else before upgrading (apart from back-up of course) and which would be the most appropriate /latest back-up instructions to follow (I'm using Vista 64 but can use an XP 32 machine if needs be).
TIA
PaulS
I bought HTC Touch 3G T3232 at Dealextreme.com
OS: Windows Mobile 6.1 ENG.
All seems to work like a charm till yesthurday .. I usualy use few programs like navigation TT and the others normaly, but After I started navigation TomTom7 +830 maps (few times before work ok).. the phone has become a frozen ...So I didn't worry about and did a SOFT RESET (it was my third soft reset for 14days..)and the phone boot ok ,BUT THE FEATURE GSM PHONE NOW IS NOT AVAILABLE , only WIFI or BT at wireless manager available now.. Also the BATTERY INDICATOR WARN ME with EXCLAMATION MARK that "Battery chemistry is unknown" and if I try to click on phone link at the base of my OS [Windows Mobile 6.1] it will pop up the window message:
'cprog' is not a valid Pocket PC application.
PLEASE HELP me what should I do ? I tried to copy cprog.exe from windows folder with no success (it told me its a part of ROM and could not be copied)
I DID SUCCESFULLY HARD RESET (clean boot): ["Volume up" + "Center Button DOWN" + "Power"] and the phone boot/load factory setting, but the problem with missing phone function cprog is still there, also problem with exclamation mark of battery... SOME TIPS WHAT SHOUD I DO WITH ?
I can use it now only as an PDA with WM6.1 but without phone function.. it is so depresive.. I tried another battery with no success. SOFT and HARD RESET work but HELP NOT..
PLEASE HELP ME ...THANKS A LOT..
help would be much appreciated...
SPECIFICATION of MY HTC touch 3G:
ROM version 01.001.1.CHS
ROM Date 9/30/2009
Radio Version 1.07.9291
Protocol Version DV3.0
Model No. NEXPERIA SY.SOL 5209
Platform Pocket PC
IMEI: has ok
CPU: QUALCOMM 7225
Speed: 528Mhz
RAM: 192MB
Flash size: 256MB
Data Bus: 32bit
Storage: size 174.96MB
Display: 240x320
Colors: 65536
Bluetooth MAC: has ok
IF someone has the same phone could be so good to send me the right ROM link or what else I can do ,
THANKS A LOT FOR ANY HELP INFO , solution....
The problem is a hardware failure and the module does not initialize TAPI. You can't solve this problem, if the guarantee is valid you can only send it in for service, otherwise I do not know if it agrees with the cost of repairs or cost for shipping a new phone.
ah ... ummm if yu got a cooked ROM ... jus take a backup n clear internal storage ... i mean d settings>system>clear storage ..
ur fone will reinstall d OS ...
n ur gud
factory reset
factory reset and it will be good
Hello ,
I installed XDAndroid 2.1 (rel 2.5a).cab on microsd Kingstone 2 gb,
but when start the autosetup the image is more large of the display and I can't complete the setup.
can you help me?
My device info:
cpu qualcomm 7225
speed 528 (?)
qvga 240x320
radio version 1.07.9235
model No. NEXPERIA SY.SOL 5209
Thanks
salvotg
salvotg said:
Hello ,
I installed XDAndroid 2.1 (rel 2.5a).cab on microsd Kingstone 2 gb,
but when start the autosetup the image is more large of the display and I can't complete the setup.
can you help me?
My device info:
cpu qualcomm 7225
speed 528 (?)
qvga 240x320
radio version 1.07.9235
model No. NEXPERIA SY.SOL 5209
Thanks
salvotg
Click to expand...
Click to collapse
Which device are you selecting when you first setup android? I am guessing that you need to select a device that also has a qvga resolution
Hello,
my problem is that I can't select any device, when autosetup start, the image exceeds the display , maybe I have to copy manually the default.txt on sd root but I don't know which is the right one for my device.
Thanks for your help
salvotg
salvotg said:
Hello,
my problem is that I can't select any device, when autosetup start, the image exceeds the display , maybe I have to copy manually the default.txt on sd root but I don't know which is the right one for my device.
Thanks for your help
salvotg
Click to expand...
Click to collapse
perhaps giving the other method of running Android a try? Simply copy all the files onto your device and boot haret.exe instead of running the *.cab
I alredy tried in this way,
but Hared.exe, ask me the default.txt,
and I don't know which select, when I start Haret.exe I see:
first line I must show the default.txt
and bottom:
Found machine Generic ARM 926,
Haret.exe whitout default.txt don't start
Thanks
salvotg
Salvotg have you make it...? I own a t3238 and I´m trying the same thing...
if you are not using a supported device (which refers to most WVGA devices)
you need to install android manually.
The cab is just for automation and the theory is not much different.
haret + rootfs + initrd + startup.txt + systems.ext
please make sure the kernel supports your devices... not all devices are supported with the same kernel. The best bet is to ask in the forum for your device.
After a quick check, if yours device is a HTC Jade, please give up. The kernel would NOT support your device at least in the near future.
In fact, developer need to develop another kernel for your device to work.
Thx for the answer Mcdull...
hello, hope somebody will help me.
i have an pna from pioneer called pm-990 made in china:
the processor is ARM.
os: windows ce 5 core
i have tried to make an update and after finding an image i put it on my sd card and the card in the pna. i restarted the pna and the update procedure started after showing a few rows, a window appeard, it was searching for an update, it couldn't find any update. after that a reboot it and noe when i try to power it he shows the start image for a few seconds and then shut's down.
please help me. i'm desperate.
Hello!
I am having trouble updating my MCU. I've been randomly losing this driver for a while now. After starting the car, the radio has a problem with starting (android works fine, no sound from the radio) when the MCU starts, the version is unknown. After 5 minutes, the device resets, sometimes the MCU will load and everything works until the car is turned off again.
During the update (SD Card FAT32, empty only with the original files from the joying blog - Trying few others), the information that SDCARD cannot be mounted
It goes to the line where the STM32UD was updated correctly, then the line with the description: "2019.09.07 10:40:57 JY_53_C63L_H32P48F64_Ver: 1.0" - the device is locked here, nothing happens - after 5 minutes, restart the device and loop.
How the device works properly MCU Version is:
2019.09.07 10:40:57 JY_53_C63L_H32P48F64_Ver: 1.0
Any factory reset not working.
CPU Info:
Intel X86_Octa-Coire 1.8Ghz [email protected] + 32 GB
Android 8.1
What should I do, what file should I use? Radio is:
Joying JY-UO135N4G
I don't speak perfect English, I use a translator. For thorough help, sending any files, I am able to use a grant. I am asking for help in solving the problem.
I am asking for information which data is still needed to solve the problem. The device is rotated.
After struggling to start the device, I did not have an MCU, I used Joying Extra Tool and the option -Rebot Option - Soft Reboot (Gui only, sufficient for all apk replacements)
After starting the car, the panel LEDs light up for 2 seconds and then they turn off, the device usually starts after a few minutes, the vehicle's logo is displayed with a countdown from 5 to 0, the device stops on the number 0. I have to hold power off and manually reset the device, then Andorid is charging correctly.
Twice after using it, the device started working properly. The MCU showed up in the settings.
System info:
Kernel: #451 SMP PREEMPT FRI MAR 29 2019
Platform: (24)6313 LF Full band carplay
touch: 911_1060(263efcda)E:0
APP 1024x600 2019-11-28 15:50:42
System 2019-11-28 09:40:06 Thursday