WM6.1 ENG "cprog.exe" problem pls help - Touch 3G General

I bought HTC Touch 3G T3232 at Dealextreme.com
OS: Windows Mobile 6.1 ENG.
All seems to work like a charm till yesthurday .. I usualy use few programs like navigation TT and the others normaly, but After I started navigation TomTom7 +830 maps (few times before work ok).. the phone has become a frozen ...So I didn't worry about and did a SOFT RESET (it was my third soft reset for 14days..)and the phone boot ok ,BUT THE FEATURE GSM PHONE NOW IS NOT AVAILABLE , only WIFI or BT at wireless manager available now.. Also the BATTERY INDICATOR WARN ME with EXCLAMATION MARK that "Battery chemistry is unknown" and if I try to click on phone link at the base of my OS [Windows Mobile 6.1] it will pop up the window message:
'cprog' is not a valid Pocket PC application.
PLEASE HELP me what should I do ? I tried to copy cprog.exe from windows folder with no success (it told me its a part of ROM and could not be copied)
I DID SUCCESFULLY HARD RESET (clean boot): ["Volume up" + "Center Button DOWN" + "Power"] and the phone boot/load factory setting, but the problem with missing phone function cprog is still there, also problem with exclamation mark of battery... SOME TIPS WHAT SHOUD I DO WITH ?
I can use it now only as an PDA with WM6.1 but without phone function.. it is so depresive.. I tried another battery with no success. SOFT and HARD RESET work but HELP NOT..
PLEASE HELP ME ...THANKS A LOT..
help would be much appreciated...
SPECIFICATION of MY HTC touch 3G:
ROM version 01.001.1.CHS
ROM Date 9/30/2009
Radio Version 1.07.9291
Protocol Version DV3.0
Model No. NEXPERIA SY.SOL 5209
Platform Pocket PC
IMEI: has ok
CPU: QUALCOMM 7225
Speed: 528Mhz
RAM: 192MB
Flash size: 256MB
Data Bus: 32bit
Storage: size 174.96MB
Display: 240x320
Colors: 65536
Bluetooth MAC: has ok
IF someone has the same phone could be so good to send me the right ROM link or what else I can do ,
THANKS A LOT FOR ANY HELP INFO , solution....

The problem is a hardware failure and the module does not initialize TAPI. You can't solve this problem, if the guarantee is valid you can only send it in for service, otherwise I do not know if it agrees with the cost of repairs or cost for shipping a new phone.

ah ... ummm if yu got a cooked ROM ... jus take a backup n clear internal storage ... i mean d settings>system>clear storage ..
ur fone will reinstall d OS ...
n ur gud

factory reset
factory reset and it will be good

Related

T-Mobile Suspended Mode

Hello every one. I really would apperciate if someone can help me with my problem becuase i am new here.
I bought a used T-Mobile pocket pc 2003 from ebay.
It has the following information when it boot:
G324e4
R6.25.02
4.01.16
The problem i have that when it goes to suspend mode after 3 min. it won't get back when I press the power key or any other keys. I have to do full reset every time it does that.
It did work really good when I cancel the suspend mode with no problems but the battry won't last 4 hours.
Is it a sofware problem, or hardware problem? Please help!
Thank you,
Lisa
Just to clarify do you have a replaceable battery or is the ppc 2003 installed on the old t-mobile pc which has an inbuilt battery, non replaceable? Also when you say you have to "restart" do you mean you have to do a soft reset, or a hard reset?
What for Software have you installed on your device.
As much as i know KSE Truefax had caused such an issue.....
Stefan
Thank you for the reply.
To answer the first question It has built in battery you can't take it off and I do hard reset meaning i erease all software I installed.
For the second question: The pocket pc 2003 still have it's orginal operating system. I didn't change any thing. Here is the sys. info:
Rom Version 4.01.16 ENG
Rom date 02/04/04
Radio version 6.25.02
Protocol version 324e4
CPU ARM SA1110
Speed 206 MHz
Ram size 32MB
Flash size 32 MB
Flash chip type 28F128
data bus 32 bits
Hardware PW10B1
when i checked the root certificate i found the following softwares:
Equfax secure
Class 2 public primary
Class 3 public primary
Entrust.net certificate
Globalsign root
GTE cyber trust global
GTE cyber trust root
Secure server certificate
Thawte premuim service
Thawate Server CA
The start up files under windows directory here is the list
aflashman 6/10/03
Battery mointer 6/10/03
cflashman 6/10/03
poutlook 6/10/03
PLEASE HELP !
Thank you in advance
I have the exact problem. but now i cant get my phone to work at all really. i upgraded my radio stack, but i think i went too far now it says no service. and i am stuck. what now? actually if someone could tell me how to get back to 2002 and start all over it would be most appreciated.
edit: flashed radio back, now i can dial out. but after the 2 minutes it won't let me suspend anymore. are the cooked roms part of the issue? i dunno i am thinking of a downgrade to 2002 then try again. i wish i still had my old rom backed up (didn't have a spare sd card). now i am stuck still needs a soft reset to come back up.
radio 6.24.00.
ROM 1.16
protocol G324e4
fixed it!
downgrade to 2002, left the radio stack alone. now it works. going to keep trying to see if i can bump it back up. just received a tmo edition from atrick-pay that has 2003. I think maybe a downgrade to 2002 then unlock will help. I am going to study it a bit more.

Unable to boot Qtek 9100/SPV M3000/HTC Wizard

hello everyone,
I recently bought a locked Qtek 9100 (SPV M3000/HTC Wizard) and I was trying to unlock it using lokiwiz v0.2. It went through all the steps without any problem, but one... it was still sim locked!
Maybe because my phone is a new version, as it had Feb 06 as its original date... I don't really have any clue.
As this didn't work, I tried to find out in Google if I could find any unlocking code, even if I had to pay 30 euros for it, as that free tool didn't work it out for me.
I used www.gsmliberty.net, paid for it, followed all their instructions - again, everything went perfect - and in the end... ... my phone is not working anymore!... It doesn't even get to the Windows Mobile Logo...
It shows HTC logo and the provider logo, but then reboots and keeps going on this cycle as long as the battery lasts.
I've tried to hard reset, but it stays all the same! I do everything as I have found out in every forum that has some information about it, and it still can't get out of this rebooting cycle...
Can anyone help me on this?
I fear that it had some kind of advanced protection against known unlocking tools and now its ruined for good
Please tell me that we can work this out! The phone was working perfectly before, when I inserted a SIM card that it allowed (from the phone's provider...)
Any help will be most welcome!
Cheers
Sorry to hear of your problems. Please tell me the details of the rom including the ipl and spl numbers. Is the rom a qtek one? - your post is confusing.
I would try reflashing the device with the original rom as the format has failed to do anything.
Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.
meschle said:
Sorry to hear of your problems. Please tell me the details of the rom including the ipl and spl numbers. Is the rom a qtek one? - your post is confusing.
I would try reflashing the device with the original rom as the format has failed to do anything.
Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.
Click to expand...
Click to collapse
Thank you for your help!
My ROM version is: 2.18.7.2 PTG (15 FeB 06)
IPL: 2.18
SPL: 2.18
I also have this numbers, which I wrote down before the phone got ruined...
Radio Version: 02.10.10
Protocol Version: 413.1.03
ExtROM: 2.18.7.9161
Which of the files in that FTP should I download?...
Looks like your rom is portugese so this will be the one
ftp://[email protected]/Wi...digy_2180702_21807102_20710_QTEK_PTG_Ship.exe
Perfect! Didn't want to do anything wrong this time.
I'll do it tonight, when I get home. Hopefully this will turn it around for me...
I'll let you know.
The least I can do is to say THANK YOU!
You have no idea of how much you can to to make the world a better place.
Thank you so much!
If there's anything I can help this forum in, please do let me know, I'll be glad if I can somehow pay back this enormous piece of advice.
hveiga said:
The least I can do is to say THANK YOU!
You have no idea of how much you can to to make the world a better place.
Thank you so much!
If there's anything I can help this forum in, please do let me know, I'll be glad if I can somehow pay back this enormous piece of advice.
Click to expand...
Click to collapse
No problem glad you got it sorted. I like to help (this is what this FORUM is for) and would hope that it does make a difference. Best way you can help is learn, learn, learn and then help, help, help others. The helpers in the forum seem to come and go so i suppose there is a shortage, most come for info and advice. I enjoy posting helps me relax lol thats why i have over 1000 posts - must be well chilled out by now :wink:
btw do other sims work in your device now - if not ask for your money back!
dun know
hi guys i need help here i'm using spv m3000 with french langueage
i did follow as what told in this part (Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.)
one thing i dun get is what is exe and where to find please help me
my ipl is 1.03
spl 1.03.0000
os 1.3.1.4
exe is the RUU (RomUpdate Utility) icon in the Rom you downloaded,just run the RUU,it'll start to flash.
hi thanks for ur info i did try to flah the rom ruu but it cannot
flash the rom is there anything else i forget to do /
i did follow all the instrution where i can get the upgrade rom for french version for this pda phone
btw i'm using window vista
chanra said:
hi thanks for ur info i did try to flah the rom ruu but it cannot
flash the rom is there anything else i forget to do /
i did follow all the instrution where i can get the upgrade rom for french version for this pda phone
btw i'm using window vista
Click to expand...
Click to collapse
Vista is still not compatible for flashing,use winXP,its highly recommended and doen't give any problems.
hi thanks alot for info
i did flash wt english rom i use as what u told ( winxp)
thanks alot i wont forget ur help
(zabardast_1)
chanra said:
hi thanks alot for info
i did flash wt english rom i use as what u told ( winxp)
thanks alot i wont forget ur help
(zabardast_1)
Click to expand...
Click to collapse
Thanz!
It was my pleasure to help you,glad you got it working
I have problem n unlocking M3000
I have problem in unlocking SPV M3000.
IPL 2.16
SPL 2.16
meschle said:
Looks like your rom is portugese so this will be the one
ftp://[email protected]/Wi...digy_2180702_21807102_20710_QTEK_PTG_Ship.exe
Click to expand...
Click to collapse
i try to download from link but ask for FTP pass !? what is ?
Hi am new here,
can i updat my device ?
i like to improve the GUI of my pocket pc ,ist possible?
now my device running wm 5 ,can i updat for wm 6?
my device is Qtek wizard200
and more as follows.
suggest me ...thank u
22/09/09 12:02:51
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: .................
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8fb7d682 - 60.63M (0x3ca0000)
ee9e4266 - 9.99M (0x9fd800)
4ea9d13a - 43.24M (0x2b3e000)
cfb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
0fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000813902052e1c1780140406da
Key Index: 82
qtek wizard upadting
Hi am new here,
can i updat my device ?
i like to improve the GUI of my pocket pc ,ist possible?
now my device running wm 5 ,can i updat for wm 6?
my device is Qtek wizard200
and more as follows.
suggest me ...thank u
22/09/09 12:02:51
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: .................
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8fb7d682 - 60.63M (0x3ca0000)
ee9e4266 - 9.99M (0x9fd800)
4ea9d13a - 43.24M (0x2b3e000)
cfb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
0fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000813902052e1c1780140406da
Key Index: 82

Upgrade ROM without ActiveSync!

hi bro
My Herald have a big problem. it's freeze on the HTC spash screen and can't load the ROM. I've made a hard rest, it's done but the problem ist still present.
I've download the Windows Mobile 6 RUU on the HTC official site but it's impossible to do the rest because ActiveSync is not connected with my phone. How can i resolve my problem without ActiveSync?
see this post 6
this method work!
http://forum.xda-developers.com/showthread.php?t=340618
I've done all said in the forum you have indicate but nothing....
I fear that my device is not out!
WaveMaster1406 said:
hi bro
My Herald have a big problem. it's freeze on the HTC spash screen and can't load the ROM. I've made a hard rest, it's done but the problem ist still present.
I've download the Windows Mobile 6 RUU on the HTC official site but it's impossible to do the rest because ActiveSync is not connected with my phone. How can i resolve my problem without ActiveSync?
Click to expand...
Click to collapse
Have you placed the phone into bootloader mode before using the RUU? (Holding the camera down and pressiing the soft reset button?)
Activesyn won't recognize the phone if connected during bootloader ... but if the phone says "USB" on the bottom left, you can run the RUU and it will work.
My device display "USB" in bootloader mode when i connect it to my PC.
But the problem is that the pc can't detect a new device connected...
When i try to flash by the SD card my herald can't detect the card!
I'm affraid! Please HELP ME!!!
why you d´ont write more?
isp XXXXXXXXXX
spl XXXXXXXXXX
card formatted at FAT 32?
camera + comm + reset ?
and was see you
"card not recognized?"
i am not a profi, but if one one this read, can you help
i find this in herald forum from here, try it again, and again....
and answer.
Ciao
why you d´ont write more?
isp XXXXXXXXXX
spl XXXXXXXXXX
card formatted at FAT 32?
camera + comm + reset ?
and was see you
"card not recognized?"
i am not a profi, but if one one this read, can you help
i find this in herald forum from here, try it again, and again....
and answer.
Ciao
IPL 1.08.0001
SPL 1.08.0001
It's normal that i get same informations about IPL and SPL?
I've done the procedure to enter in bootloader mode
But my computer don't detect it and my device display "USB" in the white area
of bootloader screen (this is normal)
But i don't know why it can't read my card with HERAIMG.NBH file inside!!!
The version of my bootloader is not displayed. Is it normal?
Per aps my bootloader get to be flashed, but how can i do it if it's the source of my problem?
PLEASE YOU ARE MY LAST SOLUTION!
about ipl 1.08xxxx and spl 1.08 xxxxx (very bad problem)
http://forum.xda-developers.com/showthread.php?t=343760&page=2
1 you have original Ruu.,.,......ship.exe
try it again when you are in bootloader mode, and reply. goes or not?
2 you have your original ruu..........ship.exe
whit winrar extrat all, and you have to rename the ruusigned file (60MB or more MB not the file with 1 MB!, to HERAIMG.nbh.
if dont work i some not can help you i m sorry.
my device work after many problem again but i have no WLAN and i have not isp 1.08xxxxxxxxxx
i wish you can write very good new!
show in your computer
if you are in bootloader mode wiht herald
if you have a networkcard not active! reactive this now
i had wm5 and his sync automatic
but after data crash on herald with wm6 does not sync again,
i search in my computer and a have see that 1 windows mobile device card does not was connect and i have reconnect this. and momentanly works again good with wm5, wm6, touch flo
show, you have no other way
ciao

O2 Atom Life Problem

i have O2 Atom life which the system device is
data bus : 32 bits
flash size: 1 gb
ram size:64 mb
extrom : ex0917
hardware: v7
Radio : AL1_KLNC2340_070905_RS0001
ROM : WWE_RC2140907B2
and the trouble is
1. I cannot turning on the wifi. it's only appears loading but wifi cannot turning on
2. i can send and receive sms, but i can't make a phone call , when i tried to make a phone call shown " Cannot complete the call. the signal may be unavailable or the phone number may not be valid. verify the number or try again later." I can receive a phone call but everytime i klik answer button there's nothing happened.
3. I can't connect to GPRS even the setting is alright.
when I tried self diagnostic for WLAN with usb connect to pc result is pass but when it not plug in to pc its shown "get adapter info () return FALSE"
wish some body could help me plis. THKS
sorry for my bad english
You have say which ROM you use? Which software you've installed?
hi, i think better u hard reset your atom life to be factory setting which default setting, then u need to install network wizards, its will be funtion at all.
If the above two solutions dont work, try flashing to a more reliable ROM and also consider changing the Radio firmware because that seems like it could be the issue.

[HTC Blue Angel] Windows Mobile 6.1 WWE by Ham3r

Windows Mobile 6.1 WWE by Ham3r
final version!
Windows Mobile 6.1 (build: 21042.1.6.1)
OS: WM6.1 WWE
Free RAM after SR: ~105 MB.
Screen's:
Software:
- ArcSoft MMS 5,
- 1-Calc,
- Jbed,
- FileExplorerEx,
- full Office (without ppt),
- Network Wizard,
- Comm Manager
- SIM Manager from Iolite.
After flash:
After flash, please make HR. After align screen, run ExtROM, please make SR!
Download:
- 4shared
Please don't make mirrors!
hi
good work,nice to see a new developer here,for me i prefere wm 6.5, thnx and good work.
Plain???
Is this so vanilla isnt it?
Yes as homan say, welcome a new developer on Blueangel...
Keep it up!
+ Que PPC said:
Is this so vanilla isnt it?
Yes as homan say, welcome a new developer on Blueangel...
Keep it up!
Click to expand...
Click to collapse
Yes, is it Vanilla, but with useful, standard apps (Java, MMS, Calc). i cooking new WWE ROM, no vanilla, but Vanilla Creamy (more software)
hi, i am new flashig my SPV M2000, Could you tell me how to fix my phone???, I ran your software(hamer 10) and i turned it off(yes, i know!!!), now i only get "serial/usb v2.06", and when i push on/off, record and reset buttoms nothing happen. Could you help me???
sorry, i don't understand.. maybe reflash rom?
flash it in windows xp
Thank you very much!!
at last, ham3r, at last you decided to share your product here.
good idea.
guys, he is good rommaker(he made great roms for wizard, too).
downloaded this rom, today will test it on ba
managed to restore my bricked BA, had to use vista32 bit, the given drivers for BA and this rom by ham3r.
Mm, current I'm using a manila2D on it, works well.
Btw, any ideas on how to make the start menu of the WM6.1 change it colors? I prefer black, matching with the manila2D darkness.
Noted and thanks!
What does this mean ?
Sorry for the display of my ignorance, but I do not know what the following means -
>After flash:
>After flash, please make HR. After align screen, >run ExtROM, please make SR!
What do I have to do, please. I know about aligning sreen, but "make HR" and "run ExtROM, please make SR !" does not mean anything to me.
Thank you for your help
HR = Hard Reset (Push Camera Button + Voice Record and Resetbutton. Change the values KILT = NO, the rest yes. Change the values with die Voicerecord and Camerabutton. When finish Press the Mailbutton
ExtRom= Mostly runs automati when this folder is on your storage card, there are some extra programs for windows.
SR = Softreset (Press the reset Button with the Stylus)
Problem with HTC Touch mobile signals
Hello,
I have HTC Touch here are the details of my model. I am facing problem with mobile signal. Give me some solution for this.
lVersion ROM
Version 3.07.720.03 WWE
ROM Date 10/25/2008
Radio Version 03.34.90
Protocol Version 4.1.13.71
Hardware CPU OMAP850
Speed 201 MGz
RAM size 128 MB
Flash Size 256 MB
Data Bus 16 bits
Storage size 110.30 Mb
Display 240X320
Colors 65536
Bluethooth Version 2.0
Bluethooth Address 00:17:E896:89:7B
Identity Model No: ELF0100
Thanks,
Purushoth
hi,this thread for HTC Blue Angel only.
how do i bypass the country code error?
every wm 5 & 6 rom i tried still gives me the error...
please help me fix it!
Why don't you applied patch for certs?
Thanks for the posting and files...
HTC BA - PH20B1 (Siemens SX66 for cingular USA)
Please help...
I was able to update to 6.1 but stuck at the end
1. Did not get the screen alighnment option.
2. Screen alignment is missing, not able to click properly
3. Not able to see the programs
3. WIFI is not working
4. Sync is not working
5. Not able to run EXTROM
I appreciate your prompt response.
Thanks!
Ham3r said:
Windows Mobile 6.1 WWE by Ham3r
final version!
Windows Mobile 6.1 (build: 21042.1.6.1)
OS: WM6.1 WWE
Free RAM after SR: ~105 MB.
Screen's:
Software:
- ArcSoft MMS 5,
- 1-Calc,
- Jbed,
- FileExplorerEx,
- full Office (without ppt),
- Network Wizard,
- Comm Manager
- SIM Manager from Iolite.
After flash:
After flash, please make HR. After align screen, run ExtROM, please make SR!
Download:
- 4shared
Please don't make mirrors!
Click to expand...
Click to collapse
always make hardreset after flashing
press camera+record+reset during some seconds
in the open menu keep 1st line at no and select yes for 2nd and 3th lines
record change line and camera change yes/no
after that click mail button
if your mail button don't work (broken or something) use multi-port tty 1.42
search more info at forum

Categories

Resources