ZTE Blade Z Max Z982 Soft Brick, Help Needed. - Blade General

(Could have asked 3 years prior but never really bothered any... oh well!)
Hi, I am looking for help trying to recover this device I had managed to soft brick a few years ago. All that I am able to do is access EDL mode and open the recovery menu. Trying to boot into the bootloader from the recovery is useless as that goes back to the splash screen as well as the default boot. I am now unaware of what else there is to fix this problem. I have tried everything I know thussfar. Please, I would like assistance.
Thanks,
Mae

Related

[HELP] TF101G Stuck on EEEPad inicial screen

Hi everyone, I'm a new member to the forum, but have been a follower for quite some time.
Let's start by introducing my device wich is:
EEEPad Transformer TF101G with ICS running the latest WW_9.2.2.6 firmware.
The device is rooted and running ASUS stock recovery.
Everything was working fine until I decided to do a Cold Boot.
It got stuck on the cold boot menu for like 3 hours and I decided to turn it off.
After that it got stuck on the inicial Asus splash screen. I forced it to turn off a couple a times and it eventually booted up.
I knew something wasn't right, so I backed up all my files and applications.
Then decided to do a factory reset through POWER + VOL-
After that it never booted again, and after a few seconds on the splash screen I hear a click noise, like the hard drive is turning off.
When I try force it to turn off, it starts up again automatically.
I've tried to flash it through nvflash, but being a TF101G it also means it is sbkv3, wich is not supported by nvflash.
Also tried boot recovery tools, but it won't even start, because as I try to connect it to the computer through adb mode, after that "click" noise, the device becomes disconnected.
I didn't try any dangerous applications and stuff like that, just decided to do a simple cold boot, the device is a week old.
If I'm posting this in the wrong section I apologize.
And hope someone can come up with a good idea.
Thanks in advance.
Obviously somethings corrupted and in my opinion the only way to fix it would be to reflash the rom in apx mode using nvflash but that doesn't seem to be possible for your device as of yet but if everything is still stock maybe you can unroot the device (or play dumb) and get it replaced under warranty?
I don't think I can unroot it, since it won't run abd mode.
I'm trying to find a way of not having to send it to warranty.
Saving it as a last resort...
Akusura said:
I don't think I can unroot it, since it won't run abd mode.
I'm trying to find a way of not having to send it to warranty.
Saving it as a last resort...
Click to expand...
Click to collapse
Eek.. since it was factory resetted I think you need to send it to warranty. Not much we can do now with just a splash screen on sbkv3
I don't consider myself an advanced user.
But I really did search everywhere and I got the idea that only with APX and without a compatible NVFlash I was screwed.
But I still had some hope.
Do you think they will give me trouble because of it being rooted?
I my opinion I don't think they will ever know, because It won't boot, It won't run recovery mode (stock) and nothing else at all, the only way to fix it is to flash it, but maybe I'm just being naive.
I treated it with all the care in the world, so only by divine intervention it is a hardware problem.
But you never now...
you should be ok (should)......
i done pretty much the same thing to a customers TF and Asus fixed it no problem.
The fact is that I actually didn't do anything wrong.
Just a cold boot that didn't work, followed by a a factory reset...
How long did it take for yours to get fixed?

LG E617G - Boot Screen is stuck in a loop

Alright, so I've got an LG E617G from Bell Aliant, a mobile carrier in Canada. I know it's rooted and it's the most up-to-date OS I could possibly get for this phone, stock, but I can't check the OS at the moment, or at least in a way I know of. I went to reset the phone to factory default settings and it gets stuck in this boot loop. I shut down, boot it back up. Now the boot screen sound doesn't finish properly and it just is stuck in a loop.
I tried to do a hard reset/forced recovery mode thing (Volume Down + Power then go to holding Home only when the LED on the bottom of the screen light up) and that didn't work. Same broken sound and stuck loop. Thinking that the charge might have something to do with it (It was at about 7% when I tried to do the initial reset. Stupid, I know, but I was drunk).
I just tried to do the same hard reset/forced recovery mode thing and that didn't work, same boot screen problem. I searched on the forums here as well as online and the only information that I've gotten is that the L5 is the closest well known representation of the LG E617g so I'm hoping you guys can help.
It should also be known, I did give ES File Explorer root access the day prior to the reset in an attempt to change the actual font. That didn't work so I tried 2 different applications that I found information on. iFont and Font Installer. I tried something with Font Installer and it didn't work so I installed iFont (without uninstalling Font Installer) and installed a font there. That didn't seem to work so I just ignored it. Then I noticed that the font had changed but only on Facebook apps. This was why I wanted to do the reset, to get rid of this font nonsense. Now I think I may have just ****ed it all up.
Any help would be greatly appreciated. Ask what you need of me, if you do need anything, and tell me a quick way of possibly finding that information or linking to a tutorial how and I will get back to you ASAP. Thank you for the patience and help guys.
********
I have since solved the problem. I downloaded and installed all drivers again, ran the LG Mobile Support Tool and on the top menu bar I went Customer Support > Recovery and put my IMEI in and hit check. Got my info and another pop up came up. Downloaded the data for my phone (I had to run it in Download mode. I took out battery, held up and down volume while plugging it in the PC, run this recovery mode. I'd fail the recovery mode but then I'd just run the program part again on the computer while keeping it in plugged in.) and installed it. Worked fine after that.
Thanks a lot for this detailed solution!
need4steer said:
Thanks a lot for this detailed solution!
Click to expand...
Click to collapse
Ah, no problem. I spend most of my time looking at forums that talk about my exact problem but never a solution. Just wanted to make sure that if anyone ends up with my problem that my fix worked.

Help me unbrick ZTE V987 rooted and stuck on ZTE logo boot

Hi all,
My zte v987 is rooted and got stuck on zte logo boot.
Before it got stuck i was playing around with an app called "freedom" that hacks in app purchases. I went into settings and turned on the "freecore" it rebooted itself after and got stuck on zte logo forever. I am able to go into recovery mode but i dont have custom recovery installed i also dont have a backup of my stock rom or any kind of backup. I am clueless about flashing so i will really need a step by step instruction. I also tried resseting my phone back to factory settings but nothing happened. I also read some threads about flashing recovery using adb and fastboot but since im a noob on android i turned off (I dont know if you need it)usb debugging mode before this all happened and i dont know what to do now. I need help.
Thanks in advance also sorry for posting this twice since im a newbie and i really need help
Mod edit: THREAD CLOSED as duplicate of https://forum.xda-developers.com/showthread.php?t=2719620.

flashing went wrong, please help guys to guide me whats wrong here zenpad 10 300cl

Hi from Lithuania!
please help someone
short story - i tried to flash recovery image via asus flash tool and when it stuck. now i havent any droid at begining no recovery option, and when it powers up touch screen dont work.
long story- 1. my friend ask to remove password from zenpad,his children add it. password with program app lock or something.
2. i tried to do hard reset but i didnt find the combination (it was very strange) only three options comes with vol down and pow. nothing comes with vol up.
3. i decide to flash it to stock firmware, download stock img drivers and etc.
4. i used asus flash tool, and it stucks at the moment, and now i cannot flash it anymore. the symptoms are-
nothing comes when power up(only light)
when its power on touch screen not working,but still see the locked app and all concent.also cannot turn it off (need mouse to turn it off)
how i can get out of this situation? how to fix it ? please help guys, i dont have any minds now, searched info for 1 week, but maybe bad.
Greetings from Lithuania
the biggest question how to get the device to bootloader? i cannot to it by buttons

Please help! Soft bricked, unrooted, untouched, 100% stock phone brick during update

I am in need of serious help! I dropped my phone off a 2nd story, smashed the screen completely. So I took my wife's old stylo 2 plus (exact same phone) stuck my Sim and SD into it, registered through metro pcs, and it worked great.
I did software update because I was really excited (my old stylo 2 was rooted and had many problems along with being unable to update android software).
Update took about an hour, then said failed. After that it has been unable to boot up. I tried recovery mode, it offers to factory reset. Again reboots and stuck at logo screen. Says error device is corrupt, cannot be trusted, will not boot. I press power it says press power again to boot anyway. Restarts and sticks at logo screen. Device is basically untouched. No oem unlock, no debugging, no developer options, nothing has been touched ever, the phone is 100% stock. I even did factory reset before I started using the phone.
Can someone please help me at the least flash trip so I can fix this??
I am not new to this, but has been 5 years since I flashed anything. The problem is, is that it's still locked, and can't boot up. The phones bricked and never been touched!
If I can get twrp flashed I can go from there, I need a way to unlock it, or flash without unlocking.
Please help me I need my phone for work. I'd rather not switch back to an old smashed screen
Cecil12 said:
I am in need of serious help! I dropped my phone off a 2nd story, smashed the screen completely. So I took my wife's old stylo 2 plus (exact same phone) stuck my Sim and SD into it, registered through metro pcs, and it worked great.
I did software update because I was really excited (my old stylo 2 was rooted and had many problems along with being unable to update android software).
Update took about an hour, then said failed. After that it has been unable to boot up. I tried recovery mode, it offers to factory reset. Again reboots and stuck at logo screen. Says error device is corrupt, cannot be trusted, will not boot. I press power it says press power again to boot anyway. Restarts and sticks at logo screen. Device is basically untouched. No oem unlock, no debugging, no developer options, nothing has been touched ever, the phone is 100% stock. I even did factory reset before I started using the phone.
Can someone please help me at the least flash trip so I can fix this??
I am not new to this, but has been 5 years since I flashed anything. The problem is, is that it's still locked, and can't boot up. The phones bricked and never been touched!
If I can get twrp flashed I can go from there, I need a way to unlock it, or flash without unlocking.
Please help me I need my phone for work. I'd rather not switch back to an old smashed screen
Click to expand...
Click to collapse
You need to download the kdz(device firmware) and flash it in download mode using lg up.
Sorry for the super long delay. I did what you said, and was able to use my phone again in no time. Thank you very much!
LG Stylo 2 Plus
Cecil12 said:
Sorry for the super long delay. I did what you said, and was able to use my phone again in no time. Thank you very much!
Click to expand...
Click to collapse
Hey would you be able to tell me which firmware worked or possibly even a link. I am having issues with getting one to work on the lg stylo 2 plus using lg up.

Categories

Resources