[HELP] TF101G Stuck on EEEPad inicial screen - Eee Pad Transformer General

Hi everyone, I'm a new member to the forum, but have been a follower for quite some time.
Let's start by introducing my device wich is:
EEEPad Transformer TF101G with ICS running the latest WW_9.2.2.6 firmware.
The device is rooted and running ASUS stock recovery.
Everything was working fine until I decided to do a Cold Boot.
It got stuck on the cold boot menu for like 3 hours and I decided to turn it off.
After that it got stuck on the inicial Asus splash screen. I forced it to turn off a couple a times and it eventually booted up.
I knew something wasn't right, so I backed up all my files and applications.
Then decided to do a factory reset through POWER + VOL-
After that it never booted again, and after a few seconds on the splash screen I hear a click noise, like the hard drive is turning off.
When I try force it to turn off, it starts up again automatically.
I've tried to flash it through nvflash, but being a TF101G it also means it is sbkv3, wich is not supported by nvflash.
Also tried boot recovery tools, but it won't even start, because as I try to connect it to the computer through adb mode, after that "click" noise, the device becomes disconnected.
I didn't try any dangerous applications and stuff like that, just decided to do a simple cold boot, the device is a week old.
If I'm posting this in the wrong section I apologize.
And hope someone can come up with a good idea.
Thanks in advance.

Obviously somethings corrupted and in my opinion the only way to fix it would be to reflash the rom in apx mode using nvflash but that doesn't seem to be possible for your device as of yet but if everything is still stock maybe you can unroot the device (or play dumb) and get it replaced under warranty?

I don't think I can unroot it, since it won't run abd mode.
I'm trying to find a way of not having to send it to warranty.
Saving it as a last resort...

Akusura said:
I don't think I can unroot it, since it won't run abd mode.
I'm trying to find a way of not having to send it to warranty.
Saving it as a last resort...
Click to expand...
Click to collapse
Eek.. since it was factory resetted I think you need to send it to warranty. Not much we can do now with just a splash screen on sbkv3

I don't consider myself an advanced user.
But I really did search everywhere and I got the idea that only with APX and without a compatible NVFlash I was screwed.
But I still had some hope.
Do you think they will give me trouble because of it being rooted?
I my opinion I don't think they will ever know, because It won't boot, It won't run recovery mode (stock) and nothing else at all, the only way to fix it is to flash it, but maybe I'm just being naive.
I treated it with all the care in the world, so only by divine intervention it is a hardware problem.
But you never now...

you should be ok (should)......
i done pretty much the same thing to a customers TF and Asus fixed it no problem.

The fact is that I actually didn't do anything wrong.
Just a cold boot that didn't work, followed by a a factory reset...
How long did it take for yours to get fixed?

Related

[Q] [Bricked] Please Help

Hey Everyone.
I recently went back home from college to find my transformer completely bricked. I have no idea what is wrong with it, and although It was previously rooted, was running prime, and was overclocked, I don't really know exactly what was on it anymore.
As it is now, it will not turn on, and just loops to tge EEE Pad ASUS screen when turned on or off, and does not do anything else. If I attempt to get into recovery by holding tho volume key down, then pressing up, It goes to the android guy with a ! in a triangle.
I really want to get it back working, and hopefully running ICS. I have looked all over and can not find anything that helps. I really want to use it for taking notes in class.
Can anyone please explain to me as if I was an idiot (Which I am) what to do.
It was be greatly appreciated!
Thanks Alot,
Alex
Alex2x3 said:
Hey Everyone.
I recently went back home from college to find my transformer completely bricked. I have no idea what is wrong with it, and although It was previously rooted, was running prime, and was overclocked, I don't really know exactly what was on it anymore.
As it is now, it will not turn on, and just loops to tge EEE Pad ASUS screen when turned on or off, and does not do anything else. If I attempt to get into recovery by holding tho volume key down, then pressing up, It goes to the android guy with a ! in a triangle.
I really want to get it back working, and hopefully running ICS. I have looked all over and can not find anything that helps. I really want to use it for taking notes in class.
Can anyone please explain to me as if I was an idiot (Which I am) what to do.
It was be greatly appreciated!
Thanks Alot,
Alex
Click to expand...
Click to collapse
That Android guy with ! is your stock recovery.
Try Vol down plus power button but instead of Vol Up,
wait till you get the Cold boot or wipe data option. Try cold booting first to see if it work.
If not try wiping data.
I suspect it did an ICS update while you were gone?
Well, first of all what SBK version do you have? (If you dont know, check your serial number, if its B70 or higher, you have SBK2).
Second, try a cold boot by starting it with power + vol-, then wait until you get the option to cold boot.
You can install the official asus 4.0.3 rom by downloading it from their site, unzipping the zip file, rename the new zip to EP101_SDUPDATE.zip (not sure if thats the correct naming), place it in the root of your SD card then boot recovery. It should install the rom then and, hopefully, start.
Id recommend doing that as a last resort though, unless you dont really care about losing whatever you got on the tablet right now.
There are most likely other ways to get it going again.
edit: damn it baseball, dont sneak in with an answer while Im writing my own answer
I've tries both cold booting and wiping and both just freeze the transformer up.
Although the wipe says that it atleast completes before freezing.
The problem is that I can not get into recovery tho, so how am I supposed to load up the official rom? I do not care about losing any data at all.
Any other suggestions? I do not have a b70 transformer btw!
You have recovery but it's stock recovery.
Download the official firmware from ASUS.
Extract the zip file and rename to EP101_SDUPDATE.zip"
Put it on the root of your sd card and bout into recovery
(it's that Android with ! that you saw)
Thanks alot guys that fixed it pretty easilly.
Typing this from it right now.

A500 suddenly died

Hi all,
I thought I'd consult the brains trust to see if anyone thinks this is salvageable. Was using my A500 about 2 hours ago, suddenly the screen powered off. Thinking nothing of it, I held down the power button to restart it. When powering back on, nothing appears to happen except for the power button lighting up. No screen on, no vibe, nothing except the power light on.
Tried power cycling a few times to no avail. Tried the reset button. Tried the Vol+ Power and Rotation switch reset. Nothing.
Out of morbid curiousity, I plugged it into the PC and switched it on and I get an APX driver being installed. So, clearly something is happening here.
It has done this once before and came back to life of its own accord very shortly afterwards, this time it's been dead for quite some time.
Any suggestions? It's well out of warranty now, so I doubt Acer would be interested in it at all.
Dopius_Fishius said:
Hi all,
I thought I'd consult the brains trust to see if anyone thinks this is salvageable. Was using my A500 about 2 hours ago, suddenly the screen powered off. Thinking nothing of it, I held down the power button to restart it. When powering back on, nothing appears to happen except for the power button lighting up. No screen on, no vibe, nothing except the power light on.
Tried power cycling a few times to no avail. Tried the reset button. Tried the Vol+ Power and Rotation switch reset. Nothing.
Out of morbid curiousity, I plugged it into the PC and switched it on and I get an APX driver being installed. So, clearly something is happening here.
It has done this once before and came back to life of its own accord very shortly afterwards, this time it's been dead for quite some time.
Any suggestions? It's well out of warranty now, so I doubt Acer would be interested in it at all.
Click to expand...
Click to collapse
In the Dev threads, or possibly Q&A, there is a thread called "stuck in APX mode". In there I believe are some steps to see if you can recover.
But, if you're in APX mode, you could probably try NVFlashing the bootloader and recovery the old fashioned way manually.
But look up that APX thread first. Will probably have the answer. I'll see if I can find it in a little while, if you don't find it first.
MD
Moscow Desire said:
In the Dev threads, or possibly Q&A, there is a thread called "stuck in APX mode". In there I believe are some steps to see if you can recover.
But, if you're in APX mode, you could probably try NVFlashing the bootloader and recovery the old fashioned way manually.
But look up that APX thread first. Will probably have the answer. I'll see if I can find it in a little while, if you don't find it first.
MD
Click to expand...
Click to collapse
Thanks MD. I looked up the threads you suggested, and after a lot of screwing around I have installed the APX drivers and used blackthund3r's APX Flash Util 0.3 (The link is broken to the current version) to attempt a recovery of my tab.
Its now sitting at an Acer screen, "Entering Acer Download Mode" while the flash util is sitting at:
Nvflash started
[resume mode]
It's been there for about 10 minutes now, no progress to report. Is it worth just sitting it out, or now that the damn tab shows SOME signs of life, can I just restart it and reset to factory?
And then most bizarre of all. I declared no progress, rebooted it. It went back to APX mode.
Re-ran the blackthund3r tool, it didnt do much so I bailed that. Restarted tab and attempted to load recovery (vol + and power) and it booted normally.
What the hell...
Dopius_Fishius said:
And then most bizarre of all. I declared no progress, rebooted it. It went back to APX mode.
Re-ran the blackthund3r tool, it didnt do much so I bailed that. Restarted tab and attempted to load recovery (vol + and power) and it booted normally.
What the hell...
Click to expand...
Click to collapse
erm for now i would make sure you have all backups of data, cpud etc,.. just incase. you can just sit em on your computer i always try to keep a nandroid of all 3 of my devices each month or so.:good:
edit: and of course keep the link for the thread MD recommended.
Gee. Sounds exactly like mine....
The only thing I haven't tried is an update .zip, but I don't hold out much hope.
Considering parting out at this point....
Yeah, I dont have high hopes that it will last a whole lot longer. Up to this point it has been running Acer OTA updates only, no custom ROMs and no root.
I restarted the tab a little while ago and it went back into APX mode again and stayed there. Some more furious button mashing and attempted restore-mode boots, and it booted normally.
I made the point of wiping it this time using the Vol+ & Power & Rotation Lock trick and its been ok so far.
Dopius_Fishius said:
Yeah, I dont have high hopes that it will last a whole lot longer. Up to this point it has been running Acer OTA updates only, no custom ROMs and no root.
I restarted the tab a little while ago and it went back into APX mode again and stayed there. Some more furious button mashing and attempted restore-mode boots, and it booted normally.
I made the point of wiping it this time using the Vol+ & Power & Rotation Lock trick and its been ok so far.
Click to expand...
Click to collapse
I have a cousin in Jamaica. She might possibly help (chicken foot and some frogs blood...voodoo you know)
Here's What I think.
You got some corrupt data or a partially bad devblock. This might explain the strange behavior on boot.
Like the tab really doesn't know how to boot.
Personally I would do 1 of 2 things at this point. Either;
1. Root that thing, and try running Timmy Deans root back to 3.2. This should reset your partitions back to normal. Then work your way back to an ICS rooted, Bootloader, and custom rom.
2. Leave it alone, and don;t turn the tab off. Clearly some partitions are messed up at this point. The toggle of the lock usually wipes user data. But the core issue is still there.
If it were me, I would pull out the nuclear missile and go for it all.
MD
Moscow Desire said:
I have a cousin in Jamaica. She might possibly help (chicken foot and some frogs blood...voodoo you know)
Here's What I think.
You got some corrupt data or a partially bad devblock. This might explain the strange behavior on boot.
Like the tab really doesn't know how to boot.
Personally I would do 1 of 2 things at this point. Either;
1. Root that thing, and try running Timmy Deans root back to 3.2. This should reset your partitions back to normal. Then work your way back to an ICS rooted, Bootloader, and custom rom.
2. Leave it alone, and don;t turn the tab off. Clearly some partitions are messed up at this point. The toggle of the lock usually wipes user data. But the core issue is still there.
If it were me, I would pull out the nuclear missile and go for it all.
MD
Click to expand...
Click to collapse
Tried the update.zip - nada
Tried timmiedean yesterday, went into Acer Download mode OK, failed....
If dolps is like mien, the first time he tries to go into recovery, it will crash again...
It's baaaack!
Tried blackthunder flash again, failed.
Went to turn off to get out of APX, and it booted!
Now boots, boots to recovery and boots to primary.
I have no explanation.
We will see.
I am suspicious....
tennessee_titan said:
It's baaaack!
Tried blackthunder flash again, failed.
Went to turn off to get out of APX, and it booted!
Now boots, boots to recovery and boots to primary.
I have no explanation.
We will see.
I am suspicious....
Click to expand...
Click to collapse
I told you maaaannnn, go see me cousin in Jamaica maaaannnnn. She do some good things you see
Glad it's running again.
MD
First, is this a SOD?
I can kill it by booting into recovery and get it back by using Blackthunder flash tool to go into APX and letting it sit for 20 minutes or so. Close the program, unplug, reboot and it is back. I would like to use timmiedean (td) and go back to square 1, but it fails at the image detect ( displays ICS 4.0.3 Civato as the current image, a red X for the new image). Has td been proven to work reverting from ICS? Will a boot recovery reflash and a new ROM flash solve this? Is there another way to get out of ICS back to HC?
Any suggestions/comments welcome!
EDIT: I flashed FLEXxx V4. Shut it off, problem still there....
Really frustrated. Trying to use the timmiedean tool, but it requires that the unit be shut off in the middle of the process, which kills it. Does anyone know the whereabouts of the blackthund3r revert tool, or the .apx package for his flash tool. I can't find it...
I'm done with this one. On Ebay for parts.... GONE!!!
Have an A100 now, rooted, unlocked,. on Relix
1 more A500 coming next week

A200 bricked with black screen

Hi guys,
Original post was made on the AcerTabletForums, but I'd like to post it here too.
I kind of bricked my device, and I was hoping any of you might have useful input.
What did I do?
- I installed the CWN JB 4.1.1 found on this forum. Everything worked ok.
- I found the CWN JB 4.1.2 ROM on this forum, and decided to install that.
- Booted into recovery, wiped the cache partition -> ok
- Tried to wipe the data partition -> NOT ok, the system froze
- Could not boot anymore into the normal system, so rebooted again into recovery.
- Tried to install the CWN JB 4.1.2 ROM, to get back to a normal system -> NOT ok, the system froze again
And now, my A200 isn't doing anything anymore. I just get a black screen. The light on the button is on, but that's about it. All the key combinations to get it into recovery aren't working, it's simply black.
Is there a way to hack my way into the device without it booting? I guess I just have to build the file system again, but I can't manipulate the system if it's not booting ...
So far, I can only see my device popping up as "APX" in Windows. I can also see it in Linux when I probe it. That's good, right? The thing is still alive. However, I can't do any more than that ADB does not see it, so FastBoot doesn't see it either ...
Is there any way to do a low level flash of the device?
BTW: it is rooted, so I won't be able to send it to Acer. *sigh*
your device is still alive sort of... look around th thread there is some guide to revive it
calvin_ng said:
your device is still alive sort of... look around th thread there is some guide to revive it
Click to expand...
Click to collapse
You are in APX mode, which means, basically, you can only flash via NVFlash. This really is only useful for flashing bootloader files more or less. In some cases you can flash recovery image files , but probably not in your case, Unless you have the SBK (secured bootloader key), you're pretty much in a dire shape.
You can try installing an A200 stock update.zip from your ext sd. By holding vol+ and PWR. However, you may not get that far. Your recovery may be cooked as well.
I wouldn't worry too much about Acer Repair. Seeings they can't boot the tab to see what's on it, more than likely they will just change the mainboard and write it off as a bad chipset. They may try to run a service rom, which uses NVFlash, but the end result will be a clean tab anyhow.
Considering a percentage of tabs that take OTA result in APX or bootloop, I suspect there won't be an issue.
Hi there,
Sorry to hijack but I have a similar problem and I'm hoping someone can help.
I have a stock as a rock unrooted A200. I think my son let the battery drain and I haven't been able to turn it on ever since. I've kept the charger on overnight but I only get a black screen no matter what key combinations I use. The hard reset must have worked (even though I couldn't see anything) because my Win7 machine recognises the tablet and all my data is gone.
Is there a way I can revive it using the PC? I bought it cheap so it's not worth fixing but I kinda like it and it would be good for the kids to muck around on.
Thanks in advance.
Moscow Desire said:
You are in APX mode, which means, basically, you can only flash via NVFlash. This really is only useful for flashing bootloader files more or less. In some cases you can flash recovery image files , but probably not in your case, Unless you have the SBK (secured bootloader key), you're pretty much in a dire shape.
You can try installing an A200 stock update.zip from your ext sd. By holding vol+ and PWR. However, you may not get that far. Your recovery may be cooked as well.
I wouldn't worry too much about Acer Repair. Seeings they can't boot the tab to see what's on it, more than likely they will just change the mainboard and write it off as a bad chipset. They may try to run a service rom, which uses NVFlash, but the end result will be a clean tab anyhow.
Considering a percentage of tabs that take OTA result in APX or bootloop, I suspect there won't be an issue.
Click to expand...
Click to collapse

Unstoppable bootloop after flashing new ROM

Hey there.
I flashed a new ROM (Kaos Droid 7.0.0) and the fitting gapps some minutes ago from CWM Touch. Everything worked as supposed, no errors, no warnings, nothing. Then I rebooted the Nexus 7 and now it's stuck in the worst bootloop I have seen so far:
The Google Screen appears, stays for some seconds, then I see a screen with the CWM Logo and the text "ClockworkmodRecovery 6.0.38", after this the device seems to reboot and the sequence starts from the beginning again.
I can not get into recovery, I can connect to my PC via USB but connection and disconnection happens every few seconds (because of the bootloop).
I guess that's it for my Nexus 7 or does anyone have an idea what I can try to do. I'd be really thankful.
Jagutherrschaften said:
Hey there.
I flashed a new ROM (Kaos Droid 7.0.0) and the fitting gapps some minutes ago from CWM Touch. Everything worked as supposed, no errors, no warnings, nothing. Then I rebooted the Nexus 7 and now it's stuck in the worst bootloop I have seen so far:
The Google Screen appears, stays for some seconds, then I see a screen with the CWM Logo and the text "ClockworkmodRecovery 6.0.38", after this the device seems to reboot and the sequence starts from the beginning again.
I can not get into recovery, I can connect to my PC via USB but connection and disconnection happens every few seconds (because of the bootloop).
I guess that's it for my Nexus 7 or does anyone have an idea what I can try to do. I'd be really thankful.
Click to expand...
Click to collapse
Hi, Jagutherrschaften...
Try pressing VOLUME DOWN + THE POWER ON KEY and HOLD BOTH for 30 seconds (or as long as it takes to break out of the 'bootloop').
(or BOTH VOL KEYS + POWER ON if the above doesn't work... although it should).
Keep them pressed until you boot you into the bootloader....
You should now be free to run fastboot commands, to either fastboot flash back to factory stock... or you could attempt to just boot into recovery, and maybe do a Nandroid Backup restore from your previous setup (assuming of course, you created one).
Anyway... as long as you can still access the bootloader... all is not lost.
Rgrds,
Ged.
GedBlake said:
Hi, Jagutherrschaften...
Try pressing VOLUME DOWN + THE POWER ON KEY and HOLD BOTH for 30 seconds (or as long as it takes to break out of the 'bootloop').
(or BOTH VOL KEYS + POWER ON if the above doesn't work... although it should).
Keep them pressed until you boot you into the bootloader....
You should now be free to run fastboot commands, to either fastboot flash back to factory stock... or you could attempt to just boot into recovery, and maybe do a Nandroid Backup restore from your previous setup (assuming of course, you created one).
Anyway... as long as you can still access the bootloader... all is not lost.
Rgrds,
Ged.
Click to expand...
Click to collapse
Sorry, I forgot to mention that I can't boot into bootloader. I tried every single combination of keys. The bootloop goes on and is completely unimpressed by my keypresses. Bad bad thing.
Jagutherrschaften said:
Sorry, I forgot to mention that I can't boot into bootloader. I tried every single combination of keys. The bootloop goes on and is completely unimpressed by my keypresses. Bad bad thing.
Click to expand...
Click to collapse
How fast is the bootloop? and how long are you pressing the buttons for?
Lean on them, as it where, for a good minute or so... the device has to pick up the 'interrupts' sooner or later.
Rgrds,
Ged.
GedBlake said:
How fast is the bootloop? and how long are you pressing the buttons for?
Lean on them, as it where, for a good minute or so... the device has to pick up the 'interrupts' sooner or later.
Rgrds,
Ged.
Click to expand...
Click to collapse
Thank you for your answers. I tried every combination and kept the keys pressed for 2 mins. Nothing. The only thing I can actually do is shut the device down by pressing POWER + VOL UP for a long while.
If bootloop doesnt stop and you cant get into bootloader....then just long press power button..that should stop the cycle...and then volm down plus power button....should get u into bootloader..atleast worked for me..
Sent from my Nexus 7 using xda app-developers app
Now here is what it looks like (doesn't matter if I press keys or not): https://dl.dropboxusercontent.com/u/12668781/Nexus7_bootloop.mkv
The normal method you described neo45215 doesn't work for me as well.
Jagutherrschaften said:
Thank you for your answers. I tried every combination and kept the keys pressed for 2 mins. Nothing. The only thing I can actually do is shut the device down by pressing POWER + VOL UP for a long while.
Here is a video what it looks like (if I press keys or not or keep keys pressed or not doesn't matter):
www.michi-fehr.de/Nexus7_bootloop.mkv
(Sorry, youtube messes with me as well. Seems not to be my day today.)
Click to expand...
Click to collapse
Mmm... this is a strange one...
Just had a look a your video... and I've seen a few bootoops, but never one involving a Custom Recovery and ONLY the Bootloader Unlock screen (yes, that is the Bootloader - it's just not normally recognized as such, because it's not in FASTBOOT mode).
If you've shutdown the tablet by pressing VOL UP + POWER ON, you've effectively booted the device into APX mode (it looks like it's shutdown, but it isn't) - if it is in APX mode, the device is now awaiting for you to run some nvFlash commands, which currently can't be done (though there is now, a very specific exception, which is not applicable here).
I agree with the previous poster, @neo45215, VOLUME DOWN (hold), then POWER BUTTON, (whilst still holding VOLUME DOWN), should boot you into the bootloader... but I think precise timing is required. Please read the following, carefully, several times.
----------------------------------------
QUOTE from http://forum.xda-developers.com/showthread.php?t=2133986
"Starting from booted or boot-looping OS:
Power (10-15 seconds) -> Normal OS Boot**
** Bootloader Interrupt: In any of the cases where you hold the power button down to try to break out of the current operating mode, if you press the Vol-Down button right after you first see the black and white screen with the Google logo, the tablet will proceed immediately to bootloader/fastboot mode, rather than booting the normal OS. You need to be ready though - you only get about 1 or 2 seconds to do this! (Thanks to RMXO for pointing this out) Note that this means you can get to the bootloader directly from any other mode!
This also explains why, when attempting a cold start using Vol-Down + Power, if you accidentally let go of the vol-down button when the screen first lights up, the Nexus 7 will boot to the normal OS. In this case, pressing Vol-Down initially is actually superfluous - what makes the device go into bootloader/fastboot mode is the Vol-Down press immediately following the google splash screen - there actually is no unique "Go to fastboot from a cold start" method."
----------------------------------------
I'm at loss to suggest anything more helpful... this looks like the bootloop from hell! But I'm convinced, that with the correct timing and persistence, some key-combo interrupt could break the Nexus 7 out of it.
Rgrds,
Ged.
GedBlake said:
Mmm... this is a strange one...
Just had a look a your video... and I've seen a few bootoops, but never one involving a Custom Recovery and ONLY the Bootloader Unlock screen (yes, that is the Bootloader - it's just not normally recognized as such, because it's not in FASTBOOT mode).
If you've shutdown the tablet by pressing VOL UP + POWER ON, you've effectively booted the device into APX mode (it looks like it's shutdown, but it isn't) - if it is in APX mode, the device is now awaiting for you to run some nvFlash commands, which currently can't be done (though there is now, a very specific exception, which is not applicable here).
I agree with the previous poster, @neo45215, VOLUME DOWN (hold), then POWER BUTTON, (whilst still holding VOLUME DOWN), should boot you into the bootloader... but I think precise timing is required. Please read the following, carefully, several times.
----------------------------------------
QUOTE from http://forum.xda-developers.com/showthread.php?t=2133986
"Starting from booted or boot-looping OS:
Power (10-15 seconds) -> Normal OS Boot**
** Bootloader Interrupt: In any of the cases where you hold the power button down to try to break out of the current operating mode, if you press the Vol-Down button right after you first see the black and white screen with the Google logo, the tablet will proceed immediately to bootloader/fastboot mode, rather than booting the normal OS. You need to be ready though - you only get about 1 or 2 seconds to do this! (Thanks to RMXO for pointing this out) Note that this means you can get to the bootloader directly from any other mode!
This also explains why, when attempting a cold start using Vol-Down + Power, if you accidentally let go of the vol-down button when the screen first lights up, the Nexus 7 will boot to the normal OS. In this case, pressing Vol-Down initially is actually superfluous - what makes the device go into bootloader/fastboot mode is the Vol-Down press immediately following the google splash screen - there actually is no unique "Go to fastboot from a cold start" method."
----------------------------------------
I'm at loss to suggest anything more helpful... this looks like the bootloop from hell! But I'm convinced, that with the correct timing and persistence, some key-combo interrupt could break the Nexus 7 out of it.
Rgrds,
Ged.
Click to expand...
Click to collapse
Thanks a lot for your help, I have tried everything, I can't get anywhere... neither bootloader nor recovery.
Additionally I can't make the device do anything I want by adb.
And as a "bonus" I can't send my Nexus7 to repair because this stupid bootloop shows "ClockworkMod Recovery v6.0.3.8" :silly:
Jagutherrschaften said:
Thanks a lot for your help, I have tried everything, I can't get anywhere... neither bootloader nor recovery.
Additionally I can't make the device do anything I want by adb.
And as a "bonus" I can't send my Nexus7 to repair because this stupid bootloop shows "ClockworkMod Recovery v6.0.3.8" :silly:
Click to expand...
Click to collapse
Really sorry to hear this... it is baffling:.
I've been hanging around on XDA since January, and I've come across a lot of weird behaviour, reported by other posters. But this is something that is outside my experience.
A few questions... (no guarantees, but I'll try to see if I can come up with something)...
Can you post download links for EVERYTHING you've flashed...
The ROM, the Gapps, the CWM recovery.
Also, what order did you flash them in?
Did you use fastboot? or a Toolkit at any time?
Where you rooted BEFORE you embarked on this endeavour?
How did you acquire root?
How long have you had the Nexus 7?
Is it a WiFi only model or a WiFi and 3G model?
Have you flashed any other Custom ROMs prior to this one?
If, so, any problems?
Do you know your current bootloader version number?
What was the battery status (percentage) prior to you flashing this ROM?
Sorry for all the questions... but something, some tiny litlle detail, might set a 'eureka!' light bulb off in my head.
Rgrds,
Ged.
GedBlake said:
Really sorry to hear this... it is baffling:.
I've been hanging around on XDA since January, and I've come across a lot of weird behaviour, reported by other posters. But this is something that is outside my experience.
A few questions... (no guarantees, but I'll try to see if I can come up with something)...
Can you post download links for EVERYTHING you've flashed...
The ROM, the Gapps, the CWM recovery.
Also, what order did you flash them in?
Did you use fastboot? or a Toolkit at any time?
Where you rooted BEFORE you embarked on this endeavour?
How did you acquire root?
How long have you had the Nexus 7?
Is it a WiFi only model or a WiFi and 3G model?
Have you flashed any other Custom ROMs prior to this one?
If, so, any problems?
Do you know your current bootloader version number?
What was the battery status (percentage) prior to you flashing this ROM?
Sorry for all the questions... but something, some tiny litlle detail, might set a 'eureka!' light bulb off in my head.
Rgrds,
Ged.
Click to expand...
Click to collapse
OK, I'll try to answer as detailed as possible:
ROM KaosDroid7.0.0
FittingGApps
CWM Recovery (Touch) was installed through ROM Manager Premium
The order of what I did was: I made a backup in Titanium Backup Pro, then I made a nandroid backup by ROM Manager Premium. I went to recovery, wiped /cache and /data, then flashed KaosDroid7.0.0, flashed GApps and rebooted. After my Nexus7 had fully booted I restored some user apps and settings via Titanium Backup Pro. I had to reboot. After that I explored that clock was force closed whenever I tried to access the alarm clock. I wondered if I could possibly have overseen a checkmark when restoring with Titanium Backup Pro (maybe forgotten to untick a system app or setting) which could lead to the force close. So I decided to start over again.
This time I thought about using ROM Manager Premium for wiping and flashing. I started the app and it told me there was an update for CWM Recovery. So I installed this update through ROM Manager Premium - CWM Recovery Touch 6.0.3.8. I rebooted and went to recovery to flash ROM and GApps again the normal way. Before flashing I wiped /cache and /data again. Everything went fine until I rebooted the tablet and found myself in this "bootloop of hell" as you called it... After having tried a lot to break it, I opened the Nexus7 to remove battery for the first time.
OK, now the other questions:
I bought my Nexus7 about 11 months ago, it's the 16 GB WiFi only version. I aquired root by using this Toolkit and everything went really smooth. I tried several ROMs yes, after some time I came across KaosDroid (don't exactly know which version I started with, maybe v5.0.0) and really liked it. I flashed a new version whenever there was one and never had any problems before.
I am not sure about my current bootloader version, I have some not too long ago nandroid backups on my PC, can I find out anywhere in there? About battery, it was 55 % or so before I started flashing, maybe even more.
The way I see this is: It looks like ROM Manager has messed something up. I have never seen a screen like the ROM Manager screen that occurs in the bootloop right after the Google screen before. Unless maybe when making a nandroid backup through ROM Manager, not sure about this. But it shouldn't be there in a normal boot sequence as far as I understand it.
The only way I can access my Nexus7 is via USB on my PC. And I have like 5 seconds to act while this ROM Manager screen is on, that's the time frame when my PC says "Nexus7 connected" and even the Toolkit finds the device and says it's in "ADB mode", then prints the serial number, but sadly after that it waits for the device to enter adb mode forever.
EDIT: And of course I can get access in APX mode, but from what I have read there is no way to do anything because commands etc. to install a new bootloader are not known (yet?).
Thanks a lot for your help and patience, it actually helps to know there is someone who reads this :good:.
It's not the end of the world if I can't reanimate my Nexus7 but it served me so well for almost a year and I really like it .
Jagutherrschaften said:
OK, I'll try to answer as detailed as possible:
ROM KaosDroid7.0.0
FittingGApps
CWM Recovery (Touch) was installed through ROM Manager Premium
The order of what I did was: I made a backup in Titanium Backup Pro, then I made a nandroid backup by ROM Manager Premium. I went to recovery, wiped /cache and /data, then flashed KaosDroid7.0.0, flashed GApps and rebooted. After my Nexus7 had fully booted I restored some user apps and settings via Titanium Backup Pro. I had to reboot. After that I explored that clock was force closed whenever I tried to access the alarm clock. I wondered if I could possibly have overseen a checkmark when restoring with Titanium Backup Pro (maybe forgotten to untick a system app or setting) which could lead to the force close. So I decided to start over again.
This time I thought about using ROM Manager Premium for wiping and flashing. I started the app and it told me there was an update for CWM Recovery. So I installed this update through ROM Manager Premium - CWM Recovery Touch 6.0.3.8. I rebooted and went to recovery to flash ROM and GApps again the normal way. Before flashing I wiped /cache and /data again. Everything went fine until I rebooted the tablet and found myself in this "bootloop of hell" as you called it... After having tried a lot to break it, I opened the Nexus7 to remove battery for the first time.
OK, now the other questions:
I bought my Nexus7 about 11 months ago, it's the 16 GB WiFi only version. I aquired root by using this Toolkit and everything went really smooth. I tried several ROMs yes, after some time I came across KaosDroid (don't exactly know which version I started with, maybe v5.0.0) and really liked it. I flashed a new version whenever there was one and never had any problems before.
I am not sure about my current bootloader version, I have some not too long ago nandroid backups on my PC, can I find out anywhere in there? About battery, it was 55 % or so before I started flashing, maybe even more.
The way I see this is: It looks like ROM Manager has messed something up. I have never seen a screen like the ROM Manager screen that occurs in the bootloop right after the Google screen before. Unless maybe when making a nandroid backup through ROM Manager, not sure about this. But it shouldn't be there in a normal boot sequence as far as I understand it.
The only way I can access my Nexus7 is via USB on my PC. And I have like 5 seconds to act while this ROM Manager screen is on, that's the time frame when my PC says "Nexus7 connected" and even the Toolkit finds the device and says it's in "ADB mode", then prints the serial number, but sadly after that it waits for the device to enter adb mode forever.
EDIT: And of course I can get access in APX mode, but from what I have read there is no way to do anything because commands etc. to install a new bootloader are not known (yet?).
Thanks a lot for your help and patience, it actually helps to know there is someone who reads this :good:.
It's not the end of the world if I can't reanimate my Nexus7 but it served me so well for almost a year and I really like it .
Click to expand...
Click to collapse
Hello again, Jagutherrschaften...
Sorry for taking so long to get back to you, but I've been really busy with non-Android stuff all day.
Before I signed off XDA early this morning, (Fri, UK time)... and before you posted your explanation of how you got into your undesirble predicament, I was trying to think why your Nexus 7 is attempting to boot into CWM. It's something I've never seen before... it occurred to me, CWM may have been incorrectly flashed to the boot partition, instead of the recovery partition. This would go some way to explaining why your Nexus 7 is attempting to boot into CWM instead of normal Android.
So in an attempt to replicate your situation, I fastboot flashed CWM on my Nexus 7, to the boot partition with...
Code:
fastboot flash boot recovery-clockwork-touch-6.0.3.8-grouper.img
...instead of (and correctly)...
Code:
fastboot flash recovery recovery-clockwork-touch-6.0.3.8-grouper.img
Upon completion of this flash, I hit START (from the bootloader)... and as expected my Nexus 7 booted into the Google logo, and then directly into CWM.
...but it didn't bootloop as depicted in your video, it just ran CWM as normal..
I booted several times into CWM, but no bootloop. (It's kind of weird having two custom recoveries installed... there's an option in CWM to restart Recovery, which upon tapping, my N7 booted straight into TWRP !, which is my Custom Recovery of choice. And resides correctly in the recovery partition. I had to make a conscious effort to reboot as normal, in order to boot into CWM).
Anyway, more puzzled more than ever, I fastboot flashed the Jellybean 4.3 stock boot .img back to it's rightful place, rebooted the tablet, to make sure everything was working as normal, and went to bed.
Later, after you posted, I re-read it many times (and took a look at the links), and re-watched your video several more times (by the way, Nandroid backups don't backup the bootloader), and nothing occurred to me; no 'euraka' ! moment.
The bootloader is obviously still intact... if it wasn't, then your Nexus 7 wouldn't boot at all. Besides, it's there, visible, with the unlocked padlock symbol !
I'm inclined to tentatively agree with your assessment that ROM Manager screwed something up. I haven't used ROM Manager for ages, due to known issues on my Advent Vega. And on the Nexus 7, I just use fastboot. On the Vega, you use a command called flash_image to flash images, and is syntactically very similar to fastboot.
Sticking with my Vega for a moment... some users are unable to boot into CWM at all. And nobody seems to know why. But a while ago, somebody did some research into this problem, and it was speculated that on some Vegas there are BAD NAND BLOCKS (like bad sectors on a hard drive, only on a chip instead) in the MISC partition, where a binary state flag is set, telling the tablet to boot into Recovery instead of Android.
Now it's a bit a leap... and hugely speculative... but I wonder if the MISC partition on your Nexus 7 may have become corrupted... ?POSSIBLY? as a result of using ROM Manager... and that is telling the tablet to boot into Recovery instead of Android.
This is a far from satisfactory explanation, though, for several reasons...
* I'm not sure how far you can extrapolate the partition structures of one completely different tablet to another completely different tablet.
* It doesn't explain why your tablet is bootlooping and mine didn't (after replacing the stock boot.img with the CWM recovery .img in the boot partition.
* And finally... I'm still baffled why VOL DOWN+POWER ON doesn't break out of the bootloop and boot directly into the bootloader. Everything I know about the Nexus 7 tells me that this should happen... and it's always been the case, that as long as you can access the bootloader, the tablet is recoverable.
I'm afraid I have nothing else to suggest or try... other than what you've tried already.
I can only offer my apologies that I was unable to assist you... maybe somebody with more technical expertise might offer some new insight or suggestions.
Rgrds,
Ged.
GedBlake said:
Hello again, Jagutherrschaften...
Sorry for taking so long to get back to you, but I've been really busy with non-Android stuff all day.
Before I signed off XDA early this morning, (Fri, UK time)... and before you posted your explanation of how you got into your undesirble predicament, I was trying to think why your Nexus 7 is attempting to boot into CWM. It's something I've never seen before... it occurred to me, CWM may have been incorrectly flashed to the boot partition, instead of the recovery partition. This would go some way to explaining why your Nexus 7 is attempting to boot into CWM instead of normal Android.
So in an attempt to replicate your situation, I fastboot flashed CWM on my Nexus 7, to the boot partition with...
Code:
fastboot flash boot recovery-clockwork-touch-6.0.3.8-grouper.img
...instead of (and correctly)...
Code:
fastboot flash recovery recovery-clockwork-touch-6.0.3.8-grouper.img
Upon completion of this flash, I hit START (from the bootloader)... and as expected my Nexus 7 booted into the Google logo, and then directly into CWM.
...but it didn't bootloop as depicted in your video, it just ran CWM as normal..
I booted several times into CWM, but no bootloop. (It's kind of weird having two custom recoveries installed... there's an option in CWM to restart Recovery, which upon tapping, my N7 booted straight into TWRP !, which is my Custom Recovery of choice. And resides correctly in the recovery partition. I had to make a conscious effort to reboot as normal, in order to boot into CWM).
Anyway, more puzzled more than ever, I fastboot flashed the Jellybean 4.3 stock boot .img back to it's rightful place, rebooted the tablet, to make sure everything was working as normal, and went to bed.
Later, after you posted, I re-read it many times (and took a look at the links), and re-watched your video several more times (by the way, Nandroid backups don't backup the bootloader), and nothing occurred to me; no 'euraka' ! moment.
The bootloader is obviously still intact... if it wasn't, then your Nexus 7 wouldn't boot at all. Besides, it's there, visible, with the unlocked padlock symbol !
I'm inclined to tentatively agree with your assessment that ROM Manager screwed something up. I haven't used ROM Manager for ages, due to known issues on my Advent Vega. And on the Nexus 7, I just use fastboot. On the Vega, you use a command called flash_image to flash images, and is syntactically very similar to fastboot.
Sticking with my Vega for a moment... some users are unable to boot into CWM at all. And nobody seems to know why. But a while ago, somebody did some research into this problem, and it was speculated that on some Vegas there are BAD NAND BLOCKS (like bad sectors on a hard drive, only on a chip instead) in the MISC partition, where a binary state flag is set, telling the tablet to boot into Recovery instead of Android.
Now it's a bit a leap... and hugely speculative... but I wonder if the MISC partition on your Nexus 7 may have become corrupted... ?POSSIBLY? as a result of using ROM Manager... and that is telling the tablet to boot into Recovery instead of Android.
This is a far from satisfactory explanation, though, for several reasons...
* I'm not sure how far you can extrapolate the partition structures of one completely different tablet to another completely different tablet.
* I't doesn't explain why your tablet is bootlooping and mine didn't (after replacing the stock boot.img with the CWM recovery .img in the boot partition.
* And finally... I'm still baffled why VOL DOWN+POWER ON doesn't break out of the bootloop and boot directly into the bootloader. Everything I know about the Nexus 7 tells me that this should happen... and it's always been the case, that as long as you can access the bootloader, the tablet is recoverable.
I'm afraid I have nothing else to suggest or try... other than what you've tried already.
I can only offer my apologies that I was unable to assist you... maybe somebody with more technical expertise might offer some new insight or suggestions.
Rgrds,
Ged.
Click to expand...
Click to collapse
Hey again GedBlake.
The last thing you have to do is apologize for helping me a lot, reading through all my text and making things clear for me. And even more you flashed stuff to your device to test if my situation can be reproduced - good that it's not . You've spent a lot of free time just to help, that's really great :good:.
With my bootloader still being intact and the device being recognized by my PC I wonder if maybe I can manage to fastboot flash a different bootloader and/or a new recovery which might maybe break the silly loop when booting. That's my only idea left but if the bootloader isn't in fastboot mode at some time during the loop this won't work too. But I'll give it a try, it's better than cutting tomatoes on my Nexus7 :laugh:.
Thank you very much for your help. If there is anything worth reporting I will of course.
Jagutherrschaften said:
Hey again GedBlake.
The last thing you have to do is apologize for helping me a lot, reading through all my text and making things clear for me. And even more you flashed stuff to your device to test if my situation can be reproduced - good that it's not . You've spent a lot of free time just to help, that's really great :good:.
With my bootloader still being intact and the device being recognized by my PC I wonder if maybe I can manage to fastboot flash a different bootloader and/or a new recovery which might maybe break the silly loop when booting. That's my only idea left but if the bootloader isn't in fastboot mode at some time during the loop this won't work too. But I'll give it a try, it's better than cutting tomatoes on my Nexus7 :laugh:.
Thank you very much for your help. If there is anything worth reporting I will of course.
Click to expand...
Click to collapse
Thanks for your kind words... they're appreciated.
Unfortunately, before you can fastboot flash anything, the Nexus 7 needs to be properly booted into the bootloader (the screen with the green Android lying on its back, and the word START adjacent to the POWER BUTTON)... and that requires breaking out of the bootloop first.
Indeed, if the VOL DOWN+POWER ON button combo was working as it should... breaking out of the bootloop would AUTOMATICALLY boot your Nexus 7 into the bootloader.
Finally, your bootloader doesn't need to re-flashed. One you have a stable bootloader boot, normally, (and the easiest way), would just be to flash back to factory stock.
Rgrds,
Ged.
GedBlake said:
Thanks for your kind words... they're appreciated.
Unfortunately, before you can fastboot flash anything, the Nexus 7 needs to be properly booted into the bootloader (the screen with the green Android lying on its back, and the word START adjacent to the POWER BUTTON)... and that requires breaking out of the bootloop first.
Indeed, if the VOL DOWN+POWER ON button combo was working as it should... breaking out of the bootloop would AUTOMATICALLY boot your Nexus 7 into the bootloader.
Finally, your bootloader doesn't need to re-flashed. One you have a stable bootloader boot, normally, (and the easiest way), would just be to flash back to factory stock.
Rgrds,
Ged.
Click to expand...
Click to collapse
Hey again.
Thanks for your explanation, I am not really a newbie with PCs and Tablets etc. but some things are not very interesting until you really need to know them. Like bootloader and fastboot in Android.
So the conclusion in my case is that maybe some day someone will find out how to get access to the N7 via APX - or to be precise, someone finds out or gets to know the necessary commands to flash something to the N7 over the APX-interface. Right?
Because from what I've read it doesn't really make sense to send my N7 in for repair right? Although it hasn't even had its 1st birthday yet I have no chance to get a warranty repair or exchange as it's very obvious I rooted the device and flashed stuff (the damned ROM Manager-screen clearly shows this). And ASUS charges 90 $ (or €, don't know) just for diagnosis, that's a bit much for a device that cost 199 €.
Any further advise? Could I buy a broken N7 from eBay for example and repair mine this way? I would have to change the mainboard right?
Have a nice sunday everyone .
U said you opened the battery...so wen u plugged it back in again,u shouldn't be in bootloop technically... Just a boot!...wat happens if u press the volm down and power button combo just as u insert the battery?
Sent from my Nexus 7 using xda app-developers app
Jagutherrschaften said:
Hey again.
Thanks for your explanation, I am not really a newbie with PCs and Tablets etc. but some things are not very interesting until you really need to know them. Like bootloader and fastboot in Android.
So the conclusion in my case is that maybe some day someone will find out how to get access to the N7 via APX - or to be precise, someone finds out or gets to know the necessary commands to flash something to the N7 over the APX-interface. Right?
Because from what I've read it doesn't really make sense to send my N7 in for repair right? Although it hasn't even had its 1st birthday yet I have no chance to get a warranty repair or exchange as it's very obvious I rooted the device and flashed stuff (the damned ROM Manager-screen clearly shows this). And ASUS charges 90 $ (or €, don't know) just for diagnosis, that's a bit much for a device that cost 199 €.
Any further advise? Could I buy a broken N7 from eBay for example and repair mine this way? I would have to change the mainboard right?
Have a nice sunday everyone .
Click to expand...
Click to collapse
Hi, Jagutherrschaften...
Really sorry it had to end like this... but... perhaps it doesn't...
Nothing about your situation makes logical sense... but reading through your posts again, I find this- On the 3rd October, you posted...
Jagutherrschaften said:
Thank you for your answers. I tried every combination and kept the keys pressed for 2 mins. Nothing. The only thing I can actually do is shut the device down by pressing POWER + VOL UP for a long while.
Click to expand...
Click to collapse
QUOTE FOR EMPHASIS:- "...by pressing POWER + VOL UP for a long while..."
This key press combo doesn't actually shut down the device... it just pushes it into APX mode. It just looks like it's shutdown.
But that's not my point... my point is your Nexus 7 detected that key press interrupt... and acted accordingly.
It did what it was supposed to do.
Maybe you hit the buttons at JUST THE RIGHT INSTANT during the bootloop... and if it can do it for one key press combo... it can do it for another. Namely, POWER+VOL DOWN.
And for this reason... I think you need to try and try and try and try and try again... until you hit the same PRECISE TIMING SWEET SPOT... such that POWER+VOL DOWN takes you into the bootloader.
Vary the timings a bit here and there... alternate pressing the buttons, both before AND after when the Google logo appears.
By your own account... you've already done it once (you just got into the wrong mode... APX mode instead of bootloader mode).
But here's the danger... if after your Herculean efforts, you do manage, finally, to access the bootloader... you absolutely cannot afford to reboot the device normally until after you've fastboot flashed back to factory stock... otherwise the whole cycle will begin again.
So... you need, in preparation...
* A fully charged Nexus 7.
* All the drivers needed (if you don't already have them) installed on your PC.
* The Jellybean 4.3 Factory Stock image downloaded (see my Sig, second link) and unzipped and ready to go.
* A working knowledge of how to use Fastboot.
* And finally... an indomitable spirit! of perseverance... and, of course, a fair amount of free time.
------------------------------------------
I am convinced that your tablet is recoverable.
It's gotta be worth a shot... "once more unto the breach, dear friends", as old Bill Shakespeare would have it.
Anyway... the very best of luck.
Rgrds,
Ged.
GedBlake said:
Hi, Jagutherrschaften...
Really sorry it had to end like this... but... perhaps it doesn't...
Nothing about your situation makes logical sense... but reading through your posts again, I find this- On the 3rd October, you posted...
QUOTE FOR EMPHASIS:- "...by pressing POWER + VOL UP for a long while..."
This key press combo doesn't actually shut down the device... it just pushes it into APX mode. It just looks like it's shutdown.
But that's not my point... my point is your Nexus 7 detected that key press interrupt... and acted accordingly.
It did what it was supposed to do.
Maybe you hit the buttons at JUST THE RIGHT INSTANT during the bootloop... and if it can do it for one key press combo... it can do it for another. Namely, POWER+VOL DOWN.
And for this reason... I think you need to try and try and try and try and try again... until you hit the same PRECISE TIMING SWEET SPOT... such that POWER+VOL DOWN takes you into the bootloader.
Vary the timings a bit here and there... alternate pressing the buttons, both before AND after when the Google logo appears.
By your own account... you've already done it once (you just got into the wrong mode... APX mode instead of bootloader mode).
But here's the danger... if after your Herculean efforts, you do manage, finally, to access the bootloader... you absolutely cannot afford to reboot the device normally until after you've fastboot flashed back to factory stock... otherwise the whole cycle will begin again.
So... you need, in preparation...
* A fully charged Nexus 7.
* All the drivers needed (if you don't already have them) installed on your PC.
* The Jellybean 4.3 Factory Stock image downloaded (see my Sig, second link) and unzipped and ready to go.
* A working knowledge of how to use Fastboot.
* And finally... an indomitable spirit! of perseverance... and, of course, a fair amount of free time.
------------------------------------------
I am convinced that your tablet is recoverable.
It's gotta be worth a shot... "once more unto the breach, dear friends", as old Bill Shakespeare would have it.
Anyway... the very best of luck.
Rgrds,
Ged.
Click to expand...
Click to collapse
@neo45215:
Technically yes, but my N7 doesn't seem to know this . Of course I've tried to get into fastboot mode right after putting back the battery as well. No chance, same bootloop.
@GedBlake:
Thanks for the encouragement, I will for sure give this a try (or several long trys to be precise). Hopefully tonight I'll have a lot of time to press keys .
And my answer to what Bill says would be: "To infinity... and beyond!"
No success so far, I tried pressing buttons for at least 1 h, nothing...
Just wanted to update the status .
Gesendet von meinem Nexus 7 mit Tapatalk 4
Facing same problem
Hello guys. I've done pretty much the same thing and my tab is in the same boot loop that this thread is all about.
The interesting thing is that the ROM I flashed is also KaosDroid7.0.0. I'm unable to prevent any further insight. Sorry for bumping. My clockwork mod version is btw, 6.0.4.1 which proves that the problem might not be clockworkmods or even ROM manager's problem. Since I hadn't used ROM manager.
Also, Is there any way whatsoever to use this APX mode? To fix my nexus.
---------- Post added at 02:05 PM ---------- Previous post was at 01:57 PM ----------
Well, I followed OP's steps almost exactly. First I'd restored the Kitkat factory image, and then I'd proceeded to install the KD 7.0.0. And after that, I realised I'd forgotten to flash Gapps. So I rebooted and then went into CWM to reflash and after that is when my Nexus 7 became useless :crying:
---------- Post added at 02:14 PM ---------- Previous post was at 02:05 PM ----------
Jagutherrschaften, did you send in your Nexus 7 for repair?

Help! Asus ZenPad 10 Z300 series stuck on logo screen

Hi, my wife got an Asus Zenpad 10 (Z300 series) tablet not too long ago, and recently it seemed to be acting up. It didn't seem to know what its battery level was so it'd suddenly shut down and would rarely stay on for a few hours if that.
I've been reading these forums and Google searching every evening for days now to no avail.
The the other day when i turned it on, it was in a bootloop. I had this happen on my own tablet so I was aware of using ADB and the recovery menu to wipe the davlik cache.
Except, that this Asus tablet only has fastboot screen (which I'd not seen before - my Samsung went to a different recovery mode), so I've been researching that more recently.
I got ADB and Fastboot working, erased the cache via Fastboot which stopped the bootloop, but it would only go as far as the logo with the little spinner circle. After messing around with fastboot trying to do a factory reset and put a custom recovery on it (TWRP) it now will only boot to the Asus logo and not even have a spinner anymore!
The flashing of anything - recovery, stock rom from ASUS (this file as I found elsewhere on these forums: UL-P01M-WW-3.3.8.0-user.zip -- although I'm not entirely sure i'm flashing correctly).
Anyway, I'm stuck with only an Asus logo or fastboot mode screen and am not that good with fastboot/adb since I only had to delve into it once to fix my own tablet over a year ago.
If anyone can help that'd be very much appreciated! :good:
[update]
OK so after failing to flash any zips (or anything!) to the device, I left it on in fastboot mode while I went to work. Now upon coming home the tablet is just a black screen! The laptop recognises it because Windows makes that chime sound when its plugged in via USB. But other than that, I can't get a response out of it Button combinations don't seem to help so now I'm not sure what to do!
Can anyone help me please? :crying:
Unless the bootloader is locked, you may have made a mistake trying to flash the ROM and trying to install a custom recovery. Anyways, if you hadn't made any changes yet to the system, I would have said check the battery first because it may be malfunctioning and not the phone it's self. I know from experience that it may have been the battery considering the way you said it was not reading the battery percentage right and shutting down. And that "bootloop", this was probably happening because it didn't have any power to start up the device as this is exactly what my device did when I had a faulty battery. My best bet is to 1 try to get a new battery, and then 2 see if your system is still intact otherwise try and reflash with the stock ROM (through adb or any computer to android debugger) and then reinstalling the right recovery that goes with the device or that of which is c-o-m-p-a-t-a-b-l-e.
Using CM12.1 on my SGH-T999
I exactly got the same issue, nothing I particularly have done as far I know, my tablet suddenly rebooted and now is stuck on Asus logo with the little circle that keeps turning.
I tried to let it go till my tablet get completely discharged and also tried to charge it completely, nothing change.
And when I wanna access to the recovery, I just get the green android mascot with the message "ERROR!". So I can't even access the recovery to reset my tablet :crying:
Edit: Tried a fastboot erase userdata and an erase cache, still bootlooping
Sorted
The only way I fixed this was by returning it to the shop and having the device replaced! Not the ideal solution, but it worked. :good:
MrLewk said:
The only way I fixed this was by returning it to the ship and having the device replaced! Not the ideal solution, but it worked. :good:
Click to expand...
Click to collapse
I guess I will have to do the same
MrLewk said:
Hi, my wife got an Asus Zenpad 10 (Z300 series) tablet not too long ago, and recently it seemed to be acting up. It didn't seem to know what its battery level was so it'd suddenly shut down and would rarely stay on for a few hours if that.
I've been reading these forums and Google searching every evening for days now to no avail.
The the other day when i turned it on, it was in a bootloop. I had this happen on my own tablet so I was aware of using ADB and the recovery menu to wipe the davlik cache.
Except, that this Asus tablet only has fastboot screen (which I'd not seen before - my Samsung went to a different recovery mode), so I've been researching that more recently.
I got ADB and Fastboot working, erased the cache via Fastboot which stopped the bootloop, but it would only go as far as the logo with the little spinner circle. After messing around with fastboot trying to do a factory reset and put a custom recovery on it (TWRP) it now will only boot to the Asus logo and not even have a spinner anymore!
The flashing of anything - recovery, stock rom from ASUS (this file as I found elsewhere on these forums: UL-P01M-WW-3.3.8.0-user.zip -- although I'm not entirely sure i'm flashing correctly).
Anyway, I'm stuck with only an Asus logo or fastboot mode screen and am not that good with fastboot/adb since I only had to delve into it once to fix my own tablet over a year ago.
If anyone can help that'd be very much appreciated! :good:
Click to expand...
Click to collapse
Asus has the firmware (Nougat) for this Z300M but I've no idea how you would get this loaded. Something to learn but as long as the OS is available you should be able to get back stock, latest OS............
zls

Categories

Resources