Hi
I have an old Mediapad M3 lite 8" with stock rom .
Yesterday after a full discharged battery, I put it in charge and start it , after 1 hour I turned on it and it goes in loop with huawei logo continuously .
Well .... I decided to do an hard reset, entered in recovery mode and did a full wipe to recover it .
The procedure was done, the tablet start and tell me as usual questions, language, google account, wifi etc .... it starts to install the last google backup found, this for a couple of minute when it turned off for ever .
Now is not possible to turn on it, not power on, not possible to enter in recovery, nothing , I tried also to disconnect battery hoping in a reset but nothing changed .
What do you suggest to do ???
In this moment if I connect it to my PC I see only the Qualcomm HS-UB COM port .
If I remember well there is a procedure to reinstall the full stock rom ( if someone could help me I appreciate it ) , but I cannot found the stock ROM CPN-W09 .
Help me please
thank you do much
Daniele ....#
Related
Hi there ,
I came to you after a lot of searching for a place that maybe can help me in case problematic.
I have a device from the famous " ZTE " .
About a month ago the device started to make himself turning on and off and then suddenly shuts down once more and since than he never turn on again.
What happens is that I turn on the device is coming up with the company logo and again and again.
The device has a root and recovery - and when I press the power button and volume up button device comes to recovery .
I tried almost everything,to replace Rom , delete everything from the device through recovery ( WIPE ) and even tried to burn the original stock Rom device company's computer via flashtools - but without success ( in my opinion the problem is Drivers - computer fails to recognize the device ) .
I already went to a lot of labs in my country, but none of them agreed to help me / could not help me.
Htiitzati with a lot of savvy people and they say that the problem is hardware - and not in parts.
Is there any chance you could help me?
Sagi .
UP - i must to get help !
sagi98 said:
UP - i must to get help !
Click to expand...
Click to collapse
How about you post on the right section?
This is zte blade, it has nothing to do with zte v970
Check my sig, to install custom roms, and recovery
Sorry but i'm just a newbie here. Plz help me ... I'm having someproblem with my SS4 I9500 GSM only model. Just bought it a few days ago and yesterday after I root it with Kingroot everything still ok until I download the TWRP recovery on CHPlay. It show some kind of warning that could affect my SD but I ignore and have it done something to install the TWRP on my phone. After one time reboot my phone started to run real slow , super hot until hang itself and extremely battery draining ( about 25 - 30 % for one time boot till it hang and reboot ). I've tried to reinstall an Original Firmware but couldn't because I can't connect my phone with the PC everytime I tried to connect the cable my PC show the Code Err 23. Device not recognized. . I tried the factory reset but it still operated like that and there's no TWRP but the original recovery of android. Changed the cable , changed the PC , still nothing happened. Someone plz help !!!
Hello,
i have a problem with my 1 week old yotaphone and hope you guys can help me to solve.
Let me say, this is my first android device. After a long time using iphones i saw this 2-displays concept and wanted to give it a try.
But now my problem and the way to:
The phone was brand new and first of all i charged it for a wohle night.
After that i put in the sim-card and started the phone and walked through the start-procedure with WLAN, Googleaccount etc.
Then the phone told me about an update and i started it over WLAN.
The phone was downloading, rebooting and shows me a white window "updating x of 127(?) Apps".
Somewhere in the middel the phone rebooted again and now its in a bootloop.
What is possible with the phone right now.
I can start the phone wit the bootloop (powerred byAndroid, then restart)
I can use "Power + Vol-" to bring it into downloading mode
When i use "Power + Vol+" nothing happend.
When i use "Vol+ + Vol-" nothing happend.
The akku of the phone is empty now and it only works with usb or power unit connected.
In bootloop or downloading mode it is not charging.
What i tried.
What i try:
I read many topics with bricked / bootlooped yotphones and how to flash or cache whipping.
i connected the phone to my pc and used yotoflasher with many different firmwares.
I used fastboot:
- flashed the system.ing with differnet sizes.
- tried different custom recovery.img from different threads here and from other sites.
Even a complete new image, moddified RU img doesn`t help.
The phone stays in bootloop.
Yes, it`s a warranty case, but before i start to strech my nerves by handling with the dealer and shipping
this phone back to china i will try everything else and hope you can help me out of this situation.
Thanks a lot
easyxx said:
Hello,
i have a problem with my 1 week old yotaphone and hope you guys can help me to solve.
Let me say, this is my first android device. After a long time using iphones i saw this 2-displays concept and wanted to give it a try.
But now my problem and the way to:
The phone was brand new and first of all i charged it for a wohle night.
After that i put in the sim-card and started the phone and walked through the start-procedure with WLAN, Googleaccount etc.
Then the phone told me about an update and i started it over WLAN.
The phone was downloading, rebooting and shows me a white window "updating x of 127(?) Apps".
Somewhere in the middel the phone rebooted again and now its in a bootloop.
What is possible with the phone right now.
I can start the phone wit the bootloop (powerred byAndroid, then restart)
I can use "Power + Vol-" to bring it into downloading mode
When i use "Power + Vol+" nothing happend.
When i use "Vol+ + Vol-" nothing happend.
The akku of the phone is empty now and it only works with usb or power unit connected.
In bootloop or downloading mode it is not charging.
What i tried.
What i try:
I read many topics with bricked / bootlooped yotphones and how to flash or cache whipping.
i connected the phone to my pc and used yotoflasher with many different firmwares.
I used fastboot:
- flashed the system.ing with differnet sizes.
- tried different custom recovery.img from different threads here and from other sites.
Even a complete new image, moddified RU img doesn`t help.
The phone stays in bootloop.
Yes, it`s a warranty case, but before i start to strech my nerves by handling with the dealer and shipping
this phone back to china i will try everything else and hope you can help me out of this situation.
Thanks a lot
Click to expand...
Click to collapse
Mine too,stuck in bootloop. I also tried the fastboot and it said waiting device.
kophyo07 said:
Mine too,stuck in bootloop. I also tried the fastboot and it said waiting device.
Click to expand...
Click to collapse
If your phone displays Downloading... and fastboot keeps saying waiting for device then there is something wrong with the installed ADB driver. Check some of the posts in this forum like this one on how to fix this. http://forum.xda-developers.com/yotaphone-one/help/yotaphone-2-yd-206-china-flash-firmware-t3306797/post69311402#post69311402
Strange that you had an OTA (Over The Air update). You didn't do anything between the SIM/Google registration and OTA ?
Normally there are no OTAs allowed on yd206 phones bought from China/HK , where did you buy it ? Chinese retailers have their own firmware that they put on phones , for me , maybe you had bad firmware installed.
The warranty of your phone is voided if you flash yotaphones bought from China and HK .
When you use yotaflasher do you get error message or "waiting for device" ?
To flash the Yotaphone , it should be in developer mode , but you couldn't put it in this mode because it first did the OTA that started your bootloop. Android apps are updated like that ("installing x of 127") when it gets updated to lollipop. Normally the OTA should have worked OK. Did you allow enough time at the Yotaphone logo after the first reboot ? It stays on this logo for 5 minutes before starting. I made this mistake.
The OTA started just after you set up Google etc ?
If so, normal yotaflashing will never work, but at least you havent broken the warranty . The thing we need to know is what exactly happened when you tried to flash , what errors messages appeared ?
If you did not put the phone in developer mode, then you cannot easily flash the phone, so your best possibility is to return the phone. Normally you can contact the seller by chat or email . Some are very good in exchanging.
It IS possible to flash your phone using fastboot, but I would not personally attempt it and you would lose your warranty . You need rootkits, SDK toolkits, universal drivers and images. Google "bootloop without USB debugging".
When I flashed my yd206 , (after many attempts) I flashed my yd206 to yd201 Russian KitKat ROM first and then did an OTA to lollipop.
You may have difficulty understanding it first because I wrote it through google translate.
I'm a 2 month z17 user. I tried various software because of the notion of the original software and the gapps problem. I got my last performance on the miu9.
I left the charge in the evening, my phone slowed down and stayed plugged in the morning. I thought it might be software and I tried to wipe it with twrp. I ended up doing the w-ipe process. I tried to discard the software I used later. I waited 4 hours and 5 hours. loading lasted for exactly 1 day.
What should I do ?
phone: ZTE Nubia Z17 (nx563j)
twrp: 3.2.1.1 Glass
Rom: [PORT] MIUI 9 by xiaomi.eu 9.2.4 stable
I hope ı understand rıght . I thınk you stuck in twrp ? you cant open the phone :S
if you re still in twrp . you can connect pc wıth usb .
put stock rom 4.16 and ınstall it.
edit : bana mesaj atabilirsin.
The original software is suan. I have twrp access. but the phone is slow and stuck at every step. as if it were a "bad sector".
- pm gönderdim kardeşim.
hi guys this is my first post about le pro 3 phone ( x720 )
Before more than one year i was install custom rom ( panaroid android rom ) and it is the best for me iam installed it via official TWRP and rooted it . but suddenly has loop and i cannot open anything just fastboot screen and when i charging it just i see red light , i tried to flash Qfile via flashone 2.0 tool ( i am installed all drivers needed ), flashed is successful but the problem loop is continue , after that iam going to local market ( in iraq ) they didn't have maintenance for leeco phone but i asked him to remove battery and return it , after doing so, he charged the phone, showed the charge rate and battery, became the battery percentage 55 % and I turned it on, but the problem continued , i flashed qfile again but nothing happened , I left the phone for months, then I gave it to a friend from China where we work together in the same company in Iraq, he took the phone to a maintenance center in China and they repaired it ( they find hardware problem and the replaced element or some thing like that ), My friend gave me the phone works with emui 5.8 and he buy spare battery and he told me that no need to replace battery as maintenance center say , after that just i install twrp and flash emui 6.0.0.30 and make root for it , the phone work fine for one month but also suddenly the system freeze and reboot loop , i tried to inter recovery but the screen black and white lines appeared as in previous problem .
what should i do dear friends
No body here ?