Sorry but i'm just a newbie here. Plz help me ... I'm having someproblem with my SS4 I9500 GSM only model. Just bought it a few days ago and yesterday after I root it with Kingroot everything still ok until I download the TWRP recovery on CHPlay. It show some kind of warning that could affect my SD but I ignore and have it done something to install the TWRP on my phone. After one time reboot my phone started to run real slow , super hot until hang itself and extremely battery draining ( about 25 - 30 % for one time boot till it hang and reboot ). I've tried to reinstall an Original Firmware but couldn't because I can't connect my phone with the PC everytime I tried to connect the cable my PC show the Code Err 23. Device not recognized. . I tried the factory reset but it still operated like that and there's no TWRP but the original recovery of android. Changed the cable , changed the PC , still nothing happened. Someone plz help !!!
Hi,
Bought the Meizu MX4 Pro recently. But upon first switch on, i got the screen showing: battery < 20%, cannot proceed with upgrade.
Now, once the battery was charged, i got the recovery screen to update and clean (With Flyme Logo), or to restart. Upon choosing restart, it stuck on the Flyme logo rotating...
I have downloaded the Flyme OS (5A, 4.5.7A, 4.5.7.1A, 4.5.7I) and placed it in the recovery drive of the mobile when connecting to a pc... but each and everytime, the screen shows checking firmware, then Firmware corrupt sign appears...
Thanks to point me in right direction... or what steps i need to follow to restore the mobile... I cannot find a dedicated forum for Meizu MX4 pro, only Meizu MX... i will try to post it there too, but if there is a better link please let me know...
Thanks,
Jinen
same problem! did you solve it? and even if i wanna clear data a screen with the unblock numbers appears and when i write my code i can't because there is just like 1 point every time i click instead 4 points so i must to restart again and the globe rotate again and system upgrade is always corrupt doesn't matter which firmware old or the latest... :S
Jinen_A said:
Hi,
Bought the Meizu MX4 Pro recently. But upon first switch on, i got the screen showing: battery < 20%, cannot proceed with upgrade.
Now, once the battery was charged, i got the recovery screen to update and clean (With Flyme Logo), or to restart. Upon choosing restart, it stuck on the Flyme logo rotating...
I have downloaded the Flyme OS (5A, 4.5.7A, 4.5.7.1A, 4.5.7I) and placed it in the recovery drive of the mobile when connecting to a pc... but each and everytime, the screen shows checking firmware, then Firmware corrupt sign appears...
Thanks to point me in right direction... or what steps i need to follow to restore the mobile... I cannot find a dedicated forum for Meizu MX4 pro, only Meizu MX... i will try to post it there too, but if there is a better link please let me know...
Thanks,
Jinen
Click to expand...
Click to collapse
Which your flyme version A o I? Do you remember the version that you have before flash? Try flash With 4.2.8.2(With the correct version A or I) good luck
Sent from my MX4 using Tapatalk
I have same problem.
javimad86 said:
same problem! did you solve it? and even if i wanna clear data a screen with the unblock numbers appears and when i write my code i can't because there is just like 1 point every time i click instead 4 points so i must to restart again and the globe rotate again and system upgrade is always corrupt doesn't matter which firmware old or the latest... :S
Click to expand...
Click to collapse
I have some problem with you, after I upgrade Firmware International to China. Before I don't now what firmware I use, I just follow step at internet tutorial upgrade Flyme OS, and I have wrong download firmware China. After that while I want to upgrade again the PIN password just can click only one number even though my PIN is 6 number. So while I click the first PIN the Command saya "Password is Wrong".
What I have to do please help me about this problem ...?
If your on (I) International download (I) version if your on (C) China download and so fourth. I found this site and it has worked for me https://www.flyme.cn/firmwarelist-7.html By the way Beta will never work on the Chinese model since they went with the only 3 traditional firmware upgrades for outside actual China itself! Hope this helps it owrked for me and I am on the Chinese model.
Hello,
I come to ask your help to solve a problem on a doogee x5 max pro.
After using it for a few months and then put away, I wanted to bring it out for a very small project.
I had the good idea to do a factory reset with an unofficial rom. I left it out and rescued a short time ago and I saw that there was still access to recovery.
I draw spflashtool and managed to install an official rom, February 2017.
The phone started but no access to Android, the phone was blocked in the boot process (on the logo doogee precisely)
After another test of ineffective flash, I now come to a stage or when I want to flash with an official ROM; spflashtool returns me:
Code:
BROM ERROR: S_FT_GET_Memory_FAIL (0xFDA)
Cannot found memory
I'm stuck at this stage ..
hi guys this is my first post about le pro 3 phone ( x720 )
Before more than one year i was install custom rom ( panaroid android rom ) and it is the best for me iam installed it via official TWRP and rooted it . but suddenly has loop and i cannot open anything just fastboot screen and when i charging it just i see red light , i tried to flash Qfile via flashone 2.0 tool ( i am installed all drivers needed ), flashed is successful but the problem loop is continue , after that iam going to local market ( in iraq ) they didn't have maintenance for leeco phone but i asked him to remove battery and return it , after doing so, he charged the phone, showed the charge rate and battery, became the battery percentage 55 % and I turned it on, but the problem continued , i flashed qfile again but nothing happened , I left the phone for months, then I gave it to a friend from China where we work together in the same company in Iraq, he took the phone to a maintenance center in China and they repaired it ( they find hardware problem and the replaced element or some thing like that ), My friend gave me the phone works with emui 5.8 and he buy spare battery and he told me that no need to replace battery as maintenance center say , after that just i install twrp and flash emui 6.0.0.30 and make root for it , the phone work fine for one month but also suddenly the system freeze and reboot loop , i tried to inter recovery but the screen black and white lines appeared as in previous problem .
what should i do dear friends
No body here ?
Hi
I have an old Mediapad M3 lite 8" with stock rom .
Yesterday after a full discharged battery, I put it in charge and start it , after 1 hour I turned on it and it goes in loop with huawei logo continuously .
Well .... I decided to do an hard reset, entered in recovery mode and did a full wipe to recover it .
The procedure was done, the tablet start and tell me as usual questions, language, google account, wifi etc .... it starts to install the last google backup found, this for a couple of minute when it turned off for ever .
Now is not possible to turn on it, not power on, not possible to enter in recovery, nothing , I tried also to disconnect battery hoping in a reset but nothing changed .
What do you suggest to do ???
In this moment if I connect it to my PC I see only the Qualcomm HS-UB COM port .
If I remember well there is a procedure to reinstall the full stock rom ( if someone could help me I appreciate it ) , but I cannot found the stock ROM CPN-W09 .
Help me please
thank you do much
Daniele ....#