HELLO I HAVE BOUGHT AN MTK6260 BASED SMARTWATCH (GV09 MODEL but sold as DZ09 by vosmep Am*zon.it) AND I'VE TRIED TO FLASH ALL THE FIRMWARES ON THE DRIVE FOLDER LINKED IN XDA BUT WHITOUT SUCCESS.
I cant install any watch (VXP) through mediatek app or fundo app... I've attached my rom readback splitted to be flashed, any suggestion?
Bought a cheap Chinese smartwatch over the Internet, seemed a Y1 but now I think it's a fake.
Used code *#8375# to get some info, which look as follows:
[VERSION]: K13-COB-Y1- IPS7789BOE-BDYD-ZH-V06.563- 20180507 [BRANCH]: 11CUMEOX_61D_BT_11C
I think it has the Mediatek MTK6261D chip.
The pedometer seems fake as well and counts 7 steps every 7 seconds. The screen waking gesture doesn't work.
Inserted a 16G spare microSD card I had, and confirmed the watch is able to read it.
Tried to install some other watch face with the Mediatek SmartDevice Android app. The app recognizes the watch as a Y1 but I can't install any watch face.
Any help available? Thanks
debernardis said:
Bought a cheap Chinese smartwatch over the Internet, seemed a Y1 but now I think it's a fake.
Used code *#8375# to get some info, which look as follows:
[VERSION]: K13-COB-Y1- IPS7789BOE-BDYD-ZH-V06.563- 20180507 [BRANCH]: 11CUMEOX_61D_BT_11C
I think it has the Mediatek MTK6261D chip.
The pedometer seems fake as well and counts 7 steps every 7 seconds. The screen waking gesture doesn't work.
Inserted a 16G spare microSD card I had, and confirmed the watch is able to read it.
Tried to install some other watch face with the Mediatek SmartDevice Android app. The app recognizes the watch as a Y1 but I can't install any watch face.
Any help available? Thanks
Click to expand...
Click to collapse
Can you upload FULL_FLASH Backup please?
I have to get comfortable before with all these tools to download and upload watch firmwares, plus, I don't have a Windows computer (just virtualized Windows XP and Linux Mint on a MacBook).
I had this same question
[VERSION] K13-COB-Y1-IPS7789HSD-QCY-KS-V.1429-20180522[BRANCH]:11CUMEOX61D_BT_11CBUILD:_NO SERIAL#:[BUILD TIME]2018/05/22 12:25[MRE VERSION]3100HAL_VERNO:
Thank you.
If everything goes well, I receive a Y1 watch today.
Is it difficult to make a backup of the firmware?
Cause if it is not too difficult, I would try to make it and share the rom with you. It would be nice to install additional faces to this watch.
OK I got
1) FlashTool_v5.1516.00
2) mtk drivers v1.1032.1
3) Readback Extractor mtk 2.4
I'll try to run them on a XP virtualbox istance in my Mac.
Could anybody please point me to a guide to backup the original firmware, so that I can upload it here?
Thanks.
debernardis said:
OK I got
1) FlashTool_v5.1516.00
2) mtk drivers v1.1032.1
3) Readback Extractor mtk 2.4
I'll try to run them on a XP virtualbox istance in my Mac.
Could anybody please point me to a guide to backup the original firmware, so that I can upload it here?
Thanks.
Click to expand...
Click to collapse
Her comes your Download:
Flashtools and Flash Guide inside
https://drive.google.com/open?id=1xd3HyHitBzW0x1fufchU5aFkAoY9slV4
any update yet on y1 smartwatch?
i need assistance too to install watch face on y1, some one or some guide specifically for this watch?
hi there is a pc software call "smart china res", this can change your watch face easily,but i guess is paid software.need to google it.
I have recently bought a GT08 from Amazon (ZKCreation Smart Watch with SIM Card Slot Bluetooth Health Track Smart Wristwatch Independent Smart Phone Watch for Android IOS Smartphones (Black)) and was watching reviews about the GT08 smartwatch and some 'fake' GT08 videos popped up in the autoplay. I clicked on the video and seen that the 'fake' watches do not have Tools on the bottom right so I checked my one and was surprised to find out my one had Names on it! This led me to believe it was a fake one I bought so I looked online to find ways to flash the real GT08 firmware on to the fake GT08 watch ( this should theoretically be possible because the motherboards look the same) and found nothing. So I thought about posting this question here.
Extra Useful information about the suspicious smartwatch:
Using the *#8375# code gives me:
Code:
LD991F7_V7.0_A_GRD_
GT08_LX7789_SL3029_
9305_9307_Z_A_V9.5
[BRANCH]:
11CW1352MP
MTK61D_BTDIALER_11
C
BUILD: BUILD_NO
SERIAL#: SN001234567
[BUILD TIME]
2018/05/31 14:29
[MRE_VERSION] -
267260076
HAL_VERNO:
I do not think the IMEI is needed but if it is please request it and I will update the thread.
So is it possible to flash the real GT08 firmware to this watch?
Another side-question is that will it work with Flash Tool since it has a MediaTek SoC (MT6261) just like the original GT08?
I think my gt08 is fake too.
Like u said icant acces videos or install apps and some codes dont work.
It's fake as it has 6261D chipset, not 6260 (6261's a dumbed down version)
You can't do much with it, I got a lemon too when I ordered a GT08
You won't be able to watch videos, use *#00000000#* to install games or install .vxp apps on it.
---------- Post added at 06:58 PM ---------- Previous post was at 06:56 PM ----------
It is much better to use full android watches (not wearos), I have a Kospet Optimus Pro
Go here for more info
Hi all,
I am new to all of this and want to try my hand at getting root for my Eonon GA9453B.
Android 10
MTK 8227L 1.2GHz ARM A7 Quad-Core
2GB RAM
32GB ROM
I could only find one other post referencing MTK 8227L but not sure where to begin.
Many thanks in advance!
JPS
Also need to add Kingo root did not work
I have an Eonon GA9450B with the 8227L with the same processor
I was able to use the following instructions to get root:
ROOT Head unit 8227l
Hello, I´m newbie on this forum, so I need some hint or help with rooting this headunit. I´ve tryed kingroot apk, kingoroot apk, kingoroot pc version via usb debug without sucess. Last I´ve tryed this instructions for ownice, but still no...
forum.xda-developers.com
Note: before using the instructions above I had to enable developer mode and usb debugging.
I'm currently in the process of figuring out how to install TWRP using these instructions:
[ROOT][FLASH][TWRP] Josmile / Xonrich MTK 8227L VW Head unit Android 10
Hi, i'v bought this unit and share all information i can find here. The unit is very good, runs android 10 but i like to customize further. Updates: - Added Magisk install instructions (prefere) - Just created a TWRP to this unit! Links bellow...
forum.xda-developers.com
Best of luck.
Hi all,
I have a Android radio PX30 with MCU : MTCE _KSP_V3. after I searched for the brand I found its effort&bj.
Is there a way to update it to android 10 or install custom rom on it?
many thanks
I have three videos on YT that show you how to upgrade. Two are free and the third is paid but probably the best method. The GPS slot method I won't include because it isn't recommended.
{Mod edit}
RKDevTool Method (USB)(Free and Safe)
ROMs Here.
Recommended ROM.
Both of these methods work for upgrading and downgrading very reliably. Data lost whichever method you use so backup with SwiftBackup then pull the folder to your computer.