Hello,
I need to reinstall my tablet and I searched a lot here about custom rooms, which does not exists on this device. Thats why I want to reinstall official rom/stock rom and I found at official lenovo site this: pcsupport.lenovo.com/us/en/products/tablets/yoga-series/yoga-tablet-2-1050/downloads/ds102874
Is this what I want and is possible to install this without flash? I cannot find any tutorial for this. And which format is that rar file at lenovo site? Need's to be "converted" to .img file?
Bought a cheap Chinese smartwatch over the Internet, seemed a Y1 but now I think it's a fake.
Used code *#8375# to get some info, which look as follows:
[VERSION]: K13-COB-Y1- IPS7789BOE-BDYD-ZH-V06.563- 20180507 [BRANCH]: 11CUMEOX_61D_BT_11C
I think it has the Mediatek MTK6261D chip.
The pedometer seems fake as well and counts 7 steps every 7 seconds. The screen waking gesture doesn't work.
Inserted a 16G spare microSD card I had, and confirmed the watch is able to read it.
Tried to install some other watch face with the Mediatek SmartDevice Android app. The app recognizes the watch as a Y1 but I can't install any watch face.
Any help available? Thanks
debernardis said:
Bought a cheap Chinese smartwatch over the Internet, seemed a Y1 but now I think it's a fake.
Used code *#8375# to get some info, which look as follows:
[VERSION]: K13-COB-Y1- IPS7789BOE-BDYD-ZH-V06.563- 20180507 [BRANCH]: 11CUMEOX_61D_BT_11C
I think it has the Mediatek MTK6261D chip.
The pedometer seems fake as well and counts 7 steps every 7 seconds. The screen waking gesture doesn't work.
Inserted a 16G spare microSD card I had, and confirmed the watch is able to read it.
Tried to install some other watch face with the Mediatek SmartDevice Android app. The app recognizes the watch as a Y1 but I can't install any watch face.
Any help available? Thanks
Click to expand...
Click to collapse
Can you upload FULL_FLASH Backup please?
I have to get comfortable before with all these tools to download and upload watch firmwares, plus, I don't have a Windows computer (just virtualized Windows XP and Linux Mint on a MacBook).
I had this same question
[VERSION] K13-COB-Y1-IPS7789HSD-QCY-KS-V.1429-20180522[BRANCH]:11CUMEOX61D_BT_11CBUILD:_NO SERIAL#:[BUILD TIME]2018/05/22 12:25[MRE VERSION]3100HAL_VERNO:
Thank you.
If everything goes well, I receive a Y1 watch today.
Is it difficult to make a backup of the firmware?
Cause if it is not too difficult, I would try to make it and share the rom with you. It would be nice to install additional faces to this watch.
OK I got
1) FlashTool_v5.1516.00
2) mtk drivers v1.1032.1
3) Readback Extractor mtk 2.4
I'll try to run them on a XP virtualbox istance in my Mac.
Could anybody please point me to a guide to backup the original firmware, so that I can upload it here?
Thanks.
debernardis said:
OK I got
1) FlashTool_v5.1516.00
2) mtk drivers v1.1032.1
3) Readback Extractor mtk 2.4
I'll try to run them on a XP virtualbox istance in my Mac.
Could anybody please point me to a guide to backup the original firmware, so that I can upload it here?
Thanks.
Click to expand...
Click to collapse
Her comes your Download:
Flashtools and Flash Guide inside
https://drive.google.com/open?id=1xd3HyHitBzW0x1fufchU5aFkAoY9slV4
any update yet on y1 smartwatch?
i need assistance too to install watch face on y1, some one or some guide specifically for this watch?
hi there is a pc software call "smart china res", this can change your watch face easily,but i guess is paid software.need to google it.
Hi all,
Does anyone have the stock firmware for a Tenfifteen F1 or similar Smartwatch based on the MTK2503 SoC? Like an idiot I reflashed mine with the firmware from a Microwear L1 (which mostly works but has stopped the heart rate sensor working), without backing the original up.
Thanks!
Same )
mattabbo said:
Hi all,
Does anyone have the stock firmware for a Tenfifteen F1 or similar Smartwatch based on the MTK2503 SoC? Like an idiot I reflashed mine with the firmware from a Microwear L1 (which mostly works but has stopped the heart rate sensor working), without backing the original up.
Thanks!
Click to expand...
Click to collapse
I maked the same
but before flashing i was making a backup but i rebuild the firmware and now im here to help you (i got the same problem and unable to find any working firmware )
and still same internal error if i try to install a watch face with mtk smartdevice
h0t0t0p0:0/0/0j.0g0s0/0C010X0M0
im unable to post link i dont have 10 posts )
place it in notepad and remove all 0
Kostels said:
Same )
I maked the same
but before flashing i was making a backup but i rebuild the firmware and now im here to help you (i got the same problem and unable to find any working firmware )
and still same internal error if i try to install a watch face with mtk smartdevice
h0t0t0p0:0/0/0j.0g0s0/0C010X0M0
im unable to post link i dont have 10 posts )
place it in notepad and remove all 0
Click to expand...
Click to collapse
watch working but screen veritical lines
Hi guys,
I'm using the Ticwatch e Chinese version [ Ticwear firmware] and want to change it to Android wear 2.0
I found some people make it possible here : https://forum.xda-developers.com/sm...s/ticwatch-e-chinese-version-ticwear-t3781183
But the links in that forum is not working anymore. :crying:
If anyone has the files. Please help and give some tutorial.
THANK YOU VERY MUCH
nonstopp9 said:
Hi guys,
I'm using the Ticwatch e Chinese version [ Ticwear firmware] and want to change it to Android wear 2.0
I found some people make it possible here : https://forum.xda-developers.com/sm...s/ticwatch-e-chinese-version-ticwear-t3781183
But the links in that forum is not working anymore. :crying:
If anyone has the files. Please help and give some tutorial.
THANK YOU VERY MUCH
Click to expand...
Click to collapse
I want just the opposite. Do you happen to have a flashable firmware for the chinese version of the E?
BTW that thread you mentioned is what you need. Just download sp flash tool from Google. The ticwear to aw zip file link works
Sorry, but I don't have flashable for Chinese rom
Hello
Good day to you all. I have got 2 smartwatches running on MTK 6580 and MT6739. I want to know how I can install VXP watches faces. I tried to download the MediaTek Smart device App, it's not connecting to the smartwatch. Can anyone please help me out and provide me with a solution. Thank you in Advance and have a great day ahead