[Q] how to root Eonon GA9453B? - Android Head-Units

Hi all,
I am new to all of this and want to try my hand at getting root for my Eonon GA9453B.
Android 10
MTK 8227L 1.2GHz ARM A7 Quad-Core
2GB RAM
32GB ROM
I could only find one other post referencing MTK 8227L but not sure where to begin.
Many thanks in advance!
JPS

Also need to add Kingo root did not work

I have an Eonon GA9450B with the 8227L with the same processor
I was able to use the following instructions to get root:
ROOT Head unit 8227l
Hello, I´m newbie on this forum, so I need some hint or help with rooting this headunit. I´ve tryed kingroot apk, kingoroot apk, kingoroot pc version via usb debug without sucess. Last I´ve tryed this instructions for ownice, but still no...
forum.xda-developers.com
Note: before using the instructions above I had to enable developer mode and usb debugging.
I'm currently in the process of figuring out how to install TWRP using these instructions:
[ROOT][FLASH][TWRP] Josmile / Xonrich MTK 8227L VW Head unit Android 10
Hi, i'v bought this unit and share all information i can find here. The unit is very good, runs android 10 but i like to customize further. Updates: - Added Magisk install instructions (prefere) - Just created a TWRP to this unit! Links bellow...
forum.xda-developers.com
Best of luck.

Related

How to install XPosed Framework on MCU-s with Lollipop

Hello all,
I have following mcu-unit: MTCC-KLD6-V2.91 with 5.1.1 android and rk3188 chip.
Yesterday I could successfully rooted my device. But I was not able to install the XPosed Framework. In recovery mode I don't see the posibility to install a file. It accepts only *img files.
Do you have any advice for me?
Will Malaysk Rom possible work on my unit, too?
Thanks in advance for your help. It would be really much appreciated.
I nearly 100% sure that Malaysk ROMs will not load on your device. I recently purchased a unit with the same MCU. I believe that the MTCC MCUs are a short-lived, intermediate MCU. I believe most units will eventually move to the MTCD MCU. *sigh* Too bad for us. LOL
Magambi
I have successfully installed Malaysk ROMs.
Please check: http://forum.xda-developers.com/and...d-unit-mcu-mtcc-kld6-v2-91-android-5-t3400476

eonon GA9450B Head Unit: Any ROMS for MTK 8227L processors?

Hi XDA,
I have the eonon GA9450B which seems to be a good unit, but the UI is a bit rubbish. I was wondering if there are any roms I can install instead of the stock?
I've done a search and have not found anything hence I thought I would ask via a question.
System: Android 10, CPU: MTK 8227L 1.2GHz ARM A7 Quad Core, RAM: 2GB, ROM: 32GB
Thanks in advance for any help
19nuj said:
Hi XDA,
I have the eonon GA9450B which seems to be a good unit, but the UI is a bit rubbish. I was wondering if there are any roms I can install instead of the stock?
I've done a search and have not found anything hence I thought I would ask via a question.
System: Android 10, CPU: MTK 8227L 1.2GHz ARM A7 Quad Core, RAM: 2GB, ROM: 32GB
Thanks in advance for any help
Click to expand...
Click to collapse
Since it's not an MTCx unit. You might find info by searching '8227L' and also posting in forum with other MTK processor units. I've requested a mod moves this question to the Android Head units forum, because your unit isn't MTC nor does it have a specific sub forum.
Desperately looking for some updates here
I also have the GA9450B
I was able to use the following instructions to get root.
ROOT Head unit 8227l
Hello, I´m newbie on this forum, so I need some hint or help with rooting this headunit. I´ve tryed kingroot apk, kingoroot apk, kingoroot pc version via usb debug without sucess. Last I´ve tryed this instructions for ownice, but still no...
forum.xda-developers.com
Note: before using the instructions above I had to enable developer mode and usb debugging.
I'm currently in the process of figuring out how to install TWRP using these instructions:
[ROOT][FLASH][TWRP] Josmile / Xonrich MTK 8227L VW Head unit Android 10
Hi, i'v bought this unit and share all information i can find here. The unit is very good, runs android 10 but i like to customize further. Updates: - Added Magisk install instructions (prefere) - Just created a TWRP to this unit! Links bellow...
forum.xda-developers.com

BMW X1 E84 [ROM UPDATE]

Hello, I have a question.
First of all, I bought the attached Android Navigation for my X1 E84 (2012).
Can someone explain me why I always get the attached error while installing the new software?
I must say that the Navigation is a 10 inch one.
Can someone send me some links related to similar X1 Roms?
The firmware I tired to install is this one :
[ROM] [ROOT] MTK 8227L 2GB/32GB BONROAD BMW E60/E65/E90/E92 8.8" Touch Screen head unit iDrive integration (Magisk root now working!)
Hi everyone, Created an account just so I could post this as I hadn't seen the firmware for this specific 8227L setup anywhere else. This ROM was sent to me by the seller of the unit directly, obviously no guarantees it will work on any other...
forum.xda-developers.com

Effort & BJ MTCE MCU Android 9 to Android 10 Update

Hi all,
I have a Android radio PX30 with MCU : MTCE _KSP_V3. after I searched for the brand I found its effort&bj.
Is there a way to update it to android 10 or install custom rom on it?
many thanks
I have three videos on YT that show you how to upgrade. Two are free and the third is paid but probably the best method. The GPS slot method I won't include because it isn't recommended.
{Mod edit}
RKDevTool Method (USB)(Free and Safe)
ROMs Here.
Recommended ROM.
Both of these methods work for upgrading and downgrading very reliably. Data lost whichever method you use so backup with SwiftBackup then pull the folder to your computer.

I want a ROM OR FIRMWARE Android 10 7inch for allwinner t3 quad core 1.2 ghz

Dear all ,Can I find firmware or from android 10 for my Head unit
I searched and try from https://4pda.to/forum/index.php?showtopic=840515&st=20040#entry97626765
but I want version 10
anyone can help?
Thanks,
Have you had any luck with this issue? I have the same head unit (mine is a Blaukpunkt) and neither USB jack works and it does not "see" my Bluetooth remote control. I assumed I simply needed to update the firmware but I have not been able to find any updated firmware for our POS Allwinner head unit. Please let me know if the USB and/or Bluetooth work on your Allwinner head unit. I am stumped. Thank you.

Categories

Resources