Hello all,
I have following mcu-unit: MTCC-KLD6-V2.91 with 5.1.1 android and rk3188 chip.
Yesterday I could successfully rooted my device. But I was not able to install the XPosed Framework. In recovery mode I don't see the posibility to install a file. It accepts only *img files.
Do you have any advice for me?
Will Malaysk Rom possible work on my unit, too?
Thanks in advance for your help. It would be really much appreciated.
I nearly 100% sure that Malaysk ROMs will not load on your device. I recently purchased a unit with the same MCU. I believe that the MTCC MCUs are a short-lived, intermediate MCU. I believe most units will eventually move to the MTCD MCU. *sigh* Too bad for us. LOL
Magambi
I have successfully installed Malaysk ROMs.
Please check: http://forum.xda-developers.com/and...d-unit-mcu-mtcc-kld6-v2-91-android-5-t3400476
Related
Hi
I'm new and happy to be here.
Anyone have any advice on if I am able to update the Android from 4.4.4 KitKat to something later? I would be grateful if an image is available. I have searched and having no luck what so ever. I am in UK.
TY
Hi, have you tried Malaysk ROMs, here is a link that may interest you, "https://forum.xda-developers.com/showpost.php?p=70647239&postcount=6748", the Malaysk ROMs for MTCB/C units are 4.4.4 based but far superior to the original firmware, please read through the article before you start flashing and make sure your head unit meets the required criteria, I wouldn't want to be responsible for your head unit being bricked.
I have 2 of these head units, one is a MTCB and the other is a MTCC, I downgraded the MTCC head unit from 5.1 lollipop in favour of the 4.4.4 firmware by Malaysk because it is so much more comprehensive and flexible.
I hope this helps.
---------- Post added at 08:27 PM ---------- Previous post was at 08:26 PM ----------
Hi, have you tried Malaysk ROMs, here is a link that may interest you, "https://forum.xda-developers.com/showpost.php?p=70647239&postcount=6748", the Malaysk ROMs for MTCB/C units are 4.4.4 based but far superior to the original firmware, please read through the article before you start flashing and make sure your head unit meets the required criteria, I wouldn't want to be responsible for your head unit being bricked.
I have 2 of these head units, one is a MTCB and the other is a MTCC, I downgraded the MTCC head unit from 5.1 lollipop in favour of the 4.4.4 firmware by Malaysk because it is so much more comprehensive and flexible.
I hope this helps.
Dj_Clubber said:
Hi
I'm new and happy to be here.
Anyone have any advice on if I am able to update the Android from 4.4.4 KitKat to something later? I would be grateful if an image is available. I have searched and having no luck what so ever. I am in UK.
TY
Click to expand...
Click to collapse
Hi guys.
I just bought this HU and i thinking to upgrade the 5.1.1 Android to 6.0 or higher.Question is where i can dowloding from i digging on the internet and not find any.Other question is its worth to upgrade?
Here is the details of the unit
Xtrons PL82MTVA
MCU VERSION MTCD_HH_V2.05_1
Android version 5.1.1
Many Thanks for any help.
Upgrade
vurban said:
Hi guys.
I just bought this HU and i thinking to upgrade the 5.1.1 Android to 6.0 or higher.Question is where i can dowloding from i digging on the internet and not find any.Other question is its worth to upgrade?
Here is the details of the unit
Xtrons PL82MTVA
MCU VERSION MTCD_HH_V2.05_1
Android version 5.1.1
Many Thanks for any help.
Click to expand...
Click to collapse
That works, but one wonders if it is worth the effort?
Have it synonymous with my MTCD RK3188 tried and have given up dan!
Sure, you'll find an Android 6 update on the web, but it would be easier to just flash a ROM, for example. Malaysk ROM or Hal9k depending on tastes and functions, I recommend you both, whereby Malaysk ROM offers more features and finishes.
Dear all,
i have this Funrover head unit, please your help if it possible yo update firmware, actually i have android 8.0 but its very slow and the mirrorlink or Easyconnect wont work on usb type C...
i attached details of my head unit
thank you all, any help please
just need to know what firmware can install, since the one that came with the HU doesnt work easyconnect (android 8.0.)
dachepo said:
just need to know what firmware can install, since the one that came with the HU doesnt work easyconnect (android 8.0.)
Click to expand...
Click to collapse
You have a Sofia unit. That unit is running Android 6.0.1. That does not support phones with Android 8.x. There is no firmware that will help you.
You should better take a look at HUR: Head Unit Reloaded. It is made by an XDA developer.
surfer63 said:
You have a Sofia unit. That unit is running Android 6.0.1. That does not support phones with Android 8.x. There is no firmware that will help you.
You should better take a look at HUR: Head Unit Reloaded. It is made by an XDA developer.
Click to expand...
Click to collapse
but in the info says android 8.0
thats not real?
dachepo said:
but in the info says android 8.0
thats not real?
Click to expand...
Click to collapse
What info? From the supplier or the website or on your unit?
I don't see that from your images.
Also: A Sofia running on android 8.0? That would be the first that I know of (but I don't know everything , not by far )
Your 2nd image shows a Bluetooth version of 6.0.1.-23. That version is not correct, but is shows Android 6.0.1 with some kernel version.
Anyway: Even if your Sofia is running Android 8, there is no (custom) firmware available that will allow it to pair with an android phone on 8.x or newer.
Thank you for the explanation surfer.
That means i cannot install any of the firmware on this forum?
dachepo said:
Thank you for the explanation surfer.
That means i cannot install any of the firmware on this forum?
Click to expand...
Click to collapse
Probably not. Maybe you can install the gtxaspec custom rom, but only if your funrover is 100% identical with a Joying Sofia (which is possible).
Normally there is a fyt.prop where the company is defined. For Joying that id is 43. So even if you use that custom rom, you first need to change the id in the custom ROM to the Funrover id, otherwise your MCU will give problems.
And even in that case: your android phone 8 will still not be supported in Android auto/Easyconnected.
So my advice: Don't even try that route as you will not have any support.
Go for HUR like I advised in my first post.
Hi XDA,
I have the eonon GA9450B which seems to be a good unit, but the UI is a bit rubbish. I was wondering if there are any roms I can install instead of the stock?
I've done a search and have not found anything hence I thought I would ask via a question.
System: Android 10, CPU: MTK 8227L 1.2GHz ARM A7 Quad Core, RAM: 2GB, ROM: 32GB
Thanks in advance for any help
19nuj said:
Hi XDA,
I have the eonon GA9450B which seems to be a good unit, but the UI is a bit rubbish. I was wondering if there are any roms I can install instead of the stock?
I've done a search and have not found anything hence I thought I would ask via a question.
System: Android 10, CPU: MTK 8227L 1.2GHz ARM A7 Quad Core, RAM: 2GB, ROM: 32GB
Thanks in advance for any help
Click to expand...
Click to collapse
Since it's not an MTCx unit. You might find info by searching '8227L' and also posting in forum with other MTK processor units. I've requested a mod moves this question to the Android Head units forum, because your unit isn't MTC nor does it have a specific sub forum.
Desperately looking for some updates here
I also have the GA9450B
I was able to use the following instructions to get root.
ROOT Head unit 8227l
Hello, I´m newbie on this forum, so I need some hint or help with rooting this headunit. I´ve tryed kingroot apk, kingoroot apk, kingoroot pc version via usb debug without sucess. Last I´ve tryed this instructions for ownice, but still no...
forum.xda-developers.com
Note: before using the instructions above I had to enable developer mode and usb debugging.
I'm currently in the process of figuring out how to install TWRP using these instructions:
[ROOT][FLASH][TWRP] Josmile / Xonrich MTK 8227L VW Head unit Android 10
Hi, i'v bought this unit and share all information i can find here. The unit is very good, runs android 10 but i like to customize further. Updates: - Added Magisk install instructions (prefere) - Just created a TWRP to this unit! Links bellow...
forum.xda-developers.com
Hi all,
I am new to all of this and want to try my hand at getting root for my Eonon GA9453B.
Android 10
MTK 8227L 1.2GHz ARM A7 Quad-Core
2GB RAM
32GB ROM
I could only find one other post referencing MTK 8227L but not sure where to begin.
Many thanks in advance!
JPS
Also need to add Kingo root did not work
I have an Eonon GA9450B with the 8227L with the same processor
I was able to use the following instructions to get root:
ROOT Head unit 8227l
Hello, I´m newbie on this forum, so I need some hint or help with rooting this headunit. I´ve tryed kingroot apk, kingoroot apk, kingoroot pc version via usb debug without sucess. Last I´ve tryed this instructions for ownice, but still no...
forum.xda-developers.com
Note: before using the instructions above I had to enable developer mode and usb debugging.
I'm currently in the process of figuring out how to install TWRP using these instructions:
[ROOT][FLASH][TWRP] Josmile / Xonrich MTK 8227L VW Head unit Android 10
Hi, i'v bought this unit and share all information i can find here. The unit is very good, runs android 10 but i like to customize further. Updates: - Added Magisk install instructions (prefere) - Just created a TWRP to this unit! Links bellow...
forum.xda-developers.com
Best of luck.