Hi i have followed this guide (https://krispitech.com/how-to-root-the-galaxy-s10-series-on-android-11-load-magisk-on-boot/) made sure i done everything correct once the flash finishes and everything is fine the phone reboots and im stuck in a bootloop where just keeps booting back to the screen that says you have an unlocked bootloader.
i have reset it and tried again and its doing the same thing. i have tripped the knox so it must of done something. any help would be appreciated as i want to get this phone rooted now i have tripped the knox counter and voided my warranty.
Did you find a way to solve it? my s10+ is in the same state.
Related
Hi,
Been having issues with the phone and am planning to rma it. I have rooted/unlocked it and tripped knox. What is the best way to restore it to stock as much as poss? Is it just a case of flashing the stock rom?
Cheers
Wipe data from CWM or Twrp before running triangle away...Check and make sure your model is supported, not sure if I ran triangle away for the Note 3 or the S4 to get all the "custom" back to "official" in download mode. Then reflash phone with stock rom, a bit hard if you're on KK and your region doesn't have it yet, then factory reset...
You won't get Knox trigger back to 0x0 but just play dumb....
Best advice I can give if there's a problem with the hardware...
Basically,
I have an unrooted device(I had it rooted but quickly re-flashed it with stock firmware later)and ever since that(not sure,maybe even had it before)my s5 keeps freezing and glitching when rapidly locking and unlocking lock screen.
It takes like 3 or 4 times to lock and unlock fast-ish to make it freeze up for 20 secs.Another thing that happens is instead of freezing on lockscreen it stops asking to unlock,and I get t see the homescreen ,and sometimes when I see it I cant tap or do anything on it,usually if I see the home screen no matter if I can or cant do anything my device will lock itself again in 30 seconds and if I unlock it again immediately it will show me the homescreen ,but I wont be able to do anything on it.To avoid this I just unlock and lock my device slowly.
How do I fix this bug.Should I flash stock firmware again?I have already done factory reset.
GioXmen123 said:
Basically,
I have an unrooted device(I had it rooted but quickly re-flashed it with stock firmware later)and ever since that(not sure,maybe even had it before)my s5 keeps freezing and glitching when rapidly locking and unlocking lock screen.
It takes like 3 or 4 times to lock and unlock fast-ish to make it freeze up for 20 secs.Another thing that happens is instead of freezing on lockscreen it stops asking to unlock,and I get t see the homescreen ,and sometimes when I see it I cant tap or do anything on it,usually if I see the home screen no matter if I can or cant do anything my device will lock itself again in 30 seconds and if I unlock it again immediately it will show me the homescreen ,but I wont be able to do anything on it.To avoid this I just unlock and lock my device slowly.
How do I fix this bug.Should I flash stock firmware again?I have already done factory reset.
Click to expand...
Click to collapse
When you rooted your device did you trip knox? Go into download mode and check if knox is 0×0 or 0×1 if its 0+1 then you tripped it and that's not that good. Tripping knox can give you problems coz of security reasons.if you tripped knox already then just flash another rom with knox removed that will solve the problem but only flash another rom if knox has been tripped .if it hasn't been tripped then take it to Samsung they wouldn't know if you did it because knox isn't tripped
whlzibos said:
When you rooted your device did you trip knox? Go into download mode and check if knox is 0×0 or 0×1 if its 0+1 then you tripped it and that's not that good. Tripping knox can give you problems coz of security reasons.if you tripped knox already then just flash another rom with knox removed that will solve the problem but only flash another rom if knox has been tripped .if it hasn't been tripped then take it to Samsung they wouldn't know if you did it because knox isn't tripped
Click to expand...
Click to collapse
Yes,knox is 0x1 sadly,it probably is not possible to return it to 0x0,but is there any way to keep the official samsung rom?I want to keep it as stock GS5 as possible,and with the ability to update
So i rooted my sm-g30w galaxy grand prime with a apk app of kingroot. im not too versed in rooting but i do not bad. i had no idea the effect that knox had on rooting my phone. so now it keeps rebooting over and over again. i wiped that partrition cache, i wiped and reset the phone took out the battery and it still keeps rebooting. im currently trying an update and intialization through the kies 3 program. my phone says knox warranty 0x0 which i believe is a good thing. please help ugh im so discouraged.
Got my S7 yesterday, played around with root, and decided to go with a stock experience for the time being so I can use Samsung Pay and MST (blasphemous, I know). I used ODIN to restore back to stock, verified KNOX counter wasn't tripped, and went on setting everything up.
I installed Samsung Pay and launched, only to run into the access denied message you would see if you were attempting to open it with a rooted device. Any thoughts as to what could be happening?
Song0330 said:
Got my S7 yesterday, played around with root, and decided to go with a stock experience for the time being so I can use Samsung Pay and MST (blasphemous, I know). I used ODIN to restore back to stock, verified KNOX counter wasn't tripped, and went on setting everything up.
I installed Samsung Pay and launched, only to run into the access denied message you would see if you were attempting to open it with a rooted device. Any thoughts as to what could be happening?
Click to expand...
Click to collapse
I would make sure you followed the return to stock instructions in psouza4 thread (http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039). I flashed through odin yestererday and took the pf2 update that was available when I was done. I am able to install and access Samsung pay. What all did you flash in ODIN?
thefirst__noel said:
I would make sure you followed the return to stock instructions in psouza4 thread (http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039). I flashed through odin yestererday and took the pf2 update that was available when I was done. I am able to install and access Samsung pay. What all did you flash in ODIN?
Click to expand...
Click to collapse
Resolved! Actually, it was my strict adherence to the instructions that led to the issue - the instructions only tell you to flash AP, CP, and CSC back down to PE1. Which was fine and dandy, but my BL remained at PF2, which is the reason why I had issues loading Samsung Pay. I was afraid that I had either tripped the mythical physical e-fuse somehow, or my phone was blacklisted from Samsung Pay servers - fortunately this was not the case! Once I updated everything back to PF2, Samsung Pay was able to load.
Help Galaxy s7
Hello friends, I made the root process in my S7 GALAXY, but the direct method cf self root, now my knox is 0x1. Is this with your method, I can return to the original state knox 0x0 and able to use the Samsung pay ???
[email protected] said:
Hello friends, I made the root process in my S7 GALAXY, but the direct method cf self root, now my knox is 0x1. Is this with your method, I can return to the original state knox 0x0 and able to use the Samsung pay ???
Click to expand...
Click to collapse
Sorry but there's no method at this time to reset Knox back to 0x0. The method of root that was posted here wouldn't trip Knox which is why when flashing back to stock they are able to use Samsung Pay again.
how to trip that knox again? and how to check knox state? I had installed stock samsung s7 edge India ROM latest but now smart tutor apps is gone (that i intalled from playstore) and samsung pay is not working
Hi I have a S7 Edge SM-G935F and I followed the TWRP and Root guide here on XDA, but i still got dm-verity triggered and I cant boot into Android without that motherf%&king error popping up about resetting. I am running the Latest stock Android 8 update, cause I just got the phone a couple of days ago so I havent tampered with it, but as soon as I try to tamper, it softbricks...
I have never had a phone with dm-verity before so yeah does anyone know a method without wiping to factory?