Database Users

help with beaming contacts from HD2 to car system

Hi, when I had TyTn II, at least I could send contacts to my car one by one. I cant seem to find a way to do that with HD2. Is this option missing and is there a way to achieve that?
I did search the forum, but did not find anything. I dont want to type 500 contacts into my car. Your gyus help would be wery appreciated

Settings > Menu > All Settings > Bluetooth > Right-most Tab > BT Send Object > Menu > Change Type > Contacts > Menu > Select All > Send
There you go. Well hidden eh!

Jim Coleman said:
Settings > Menu > All Settings > Bluetooth > Right-most Tab > BT Send Object > Menu > Change Type > Contacts > Menu > Select All > Send
There you go. Well hidden eh!
Click to expand...
Click to collapse
wow. that least to say, well hidden !!! You saved my day, o rto say life mate. Thanks a lot

Samsung Intercept Dialer Codes

Found this over in SDX while doing research on a co-workers phone, and thought you guys would appreciate it.
Oh and there is a great app on the market for reading you MSL code called "MSL Reader."
Good Luck.
*#0*# - Test Utility - SAFE TO PLAY WITH
##UPST# - modem directory
##DATA# - Data Programming Menu (User Name, Advanced, Restore, Enable HFA, DSA Server, MMSC URL)
##RTN# - Status Menu
##DEBUG# - Debug Menu � (Debug Screen, Test Calls, RC Data, HDR/1X Selection, Voice Privacy, DTMF Set, Korea Mode Set)
##AKEY# - Data A key menu � not sure what it does
##GPSCLRX# - Reset the GPS
##SCRTN# - changes DSA back to Factory
##TTY# - enables TTY
*#DATA*727336*# - Current Data State
*#0842# - Vibration test - SAFE TO PLAY WITH
*#0673# - Melody Test - SAFE TO PLAY WITH
*#7780# - Factory Reset
*#232331# - Bluetooth RF Test Mode
*#0289# - Melody Test again?
*#2664# - Touchscreen Firmware Version
*#2663# - Touchscreen Accuracy Test - SAFE TO PLAY WITH
*#3264# - RAM Version
*#2664# - Main Firmware Update
*#0283# - Receiver Packet Loopback
*#767*3855# - Factory Format � CRAP!! WARNING!!!
*#197328640# - service menu
*#0011# - service menu
*#0228# - Battery Status - NUMUS will like this screen. Tongue
*#32489# - service menu
*#2580# - service menu
*#0782# - RTCTimeRead - displays time (and seconds)
*#0011# - service menu
*#9090# - service menu
*#7284# - service menu
*#4238378# - service menu
*#745# - Sec_RIL_Dump - allows you to copy to phone memory, clear ril log, (greyed out copy to SDcard and view RIL log), exit
*#9900# - SysDump - copy logcat/dumpstate/dumpsys, enable debug log, copy watchdogdumpstatelog)
*#2263# - ? force closes
*#1575#- service menu
*#6984125*#- service menu
*#2886# - nothing
*#2767*2878# - service menu
*im not responsible for anything that happens to your phone while trying this,i stated above to be careful*

question
roaming only? how do I do? can or not?

henrydcc said:
roaming only? how do I do? can or not?
Click to expand...
Click to collapse
You would have to edit your PRL. Since I do not actually have this phone, and was just doing research for a friend on rooting and such I am not entirely sure how that would work on this phone. I have an EVO and have found sites that tell you how to edit your PRL for the EVO to force your phone onto Verizon Towers without roaming charges, but I'm not sure if that would help you.
This is for the EVO not the intercept, but maybe you can find a workaround for your phone: http://forum.xda-developers.com/showthread.php?t=696073

any word on how to do a Virgin OTA activation (normal mode is enter menu ##VIRGIN# then select option through menu items). However, this must initiate a dialer code somehow, normally of the form *228 (for verizon for example)

Reprogram phone codes
Most important, if you lose 3G Data or Need to reactivate phone:
##847446#
You need to know your original MDN and MSID.
Home -> Menu -> Settings -> About phone -> Status
Write down your MSID and MDN (your phone number).
Use ##847446# in dialer to edit MSID and MDN to 1111111111 ( both values).
and then phone reboots.
Use ##847446# in dialer to edit MSID and MDN to original values that you wrote down
and then phone reboots.

no connect 4G-LTE GRA-L09

Good, friends have a P8 model GRA-L09, when I received had android 5 EMUI3 not build number I remember, 4G-LTE network was perfect, after you upgrade to the compilation B321, started the trouble connecting to the 4G-LTE network not to the automatic 3G and 4G and conversely, I was no data, then update via ota to B370 and since the latter does not connect me to 4G-LTE networks

Try checking, then manually setting / resetting the following if necessary:
Settings > More > Mobile Network > turn on Mobile data
Settings > More > Mobile Network > Preferred network type > set to 4G/3G/2G auto
Settings > More > Mobile Network > Access Point Names > access the Menu (near the bottom) > Reset to default
Settings > More > Mobile Network > Access Point Names > access the Menu (near the bottom) > New APN
For the last one, you'll need to get the APN settings from your network provider - for example, if you had a Google Nexus 6, was situated in the US with T-Mobile, these are the APN settings.

GaT7 said:
Try checking, then manually setting / resetting the following if necessary:
Settings > More > Mobile Network > turn on Mobile data
Settings > More > Mobile Network > Preferred network type > set to 4G/3G/2G auto
Settings > More > Mobile Network > Access Point Names > access the Menu (near the bottom) > Reset to default
Settings > More > Mobile Network > Access Point Names > access the Menu (near the bottom) > New APN
For the last one, you'll need to get the APN settings from your network provider - for example, if you had a Google Nexus 6, was situated in the US with T-Mobile, these are the APN settings.
Click to expand...
Click to collapse
Thanks friend, but now that you mention and did nothing, just connects me to 3g networks and H +

Did you try creating a new APN with settings from your network provider?

I have huawei p8 , i Switch on it ,after 1 Minute Switch off unexpectedly.......what is wrong???????

I 'm testing down to the B170 version and apply the custom update to remove the carrier.
pd.
not work, turn to B170 and apply the update custom, and still does not connect to the 4G network

YotaPhone 2 - Service Menu

In order to get into the service menu you need to dial the code below. You can check for example, the battery temperature , etc...
Code:
*#*#4636#*#*

this is no Yotaphone Service menu but its normally Android service menu
https://forum.xda-developers.com/yo...otaphone-2-signal-boost-trick-unlock-t3531682

SOLVED: Enabling Caller ID in Nokia 6

I have the TA-1000 and I couldn't find the option to enable my Caller ID on the phone. It's disabled by default for my number and I always have to enable it manually if I change or factory reset my phone. All my other phones have an "Additional Settings" menu under "Settings" of the Phone app to enable/disable the "Caller ID" for outgoing calls.
But if you have a multi SIM Phone, the Settings for the Caller ID have moved into the SIM Card Settings. So in Android 7.1.1. it's located at:
Settings > Call settings > Select UIM/SIM Card > GSM call settings > Additional Settings > Caller ID
This setting is also accessible from the Phone App itself:
Phone > Settings > Select UIM/SIM Card > GSM call settings > Additional Settings > Caller ID

nokia 6
not seeing that

Useful! Thanks!