Database Users

[Q] ## Codes Programming

I am looking for the ## codes for the fascinate. I am sure that someone is able to find them. I have searched the web for hours and not found any that will work with the fascinate. I am only looking, because I am sure that just like my incredible I can change the IP settings and use the wifi tethering for free on the fascinate too.
I appreciate any and all help to get these codes.

Have you tried the codes that work on the international I9000, Samsung's first Galaxy S model?

Thanks for the link. I tried about half of those and none of them work. I think their must be a set of codes specific to the CDMA version.

I was able to get a few codes out of a verizon represenative, but not everything.
This code enables the ability to use the second code I got.
*#22745927
you then enter 000000 for the spc
and change to Hiddenmenu Enable and press ok.
the type **772
you then enter 000000 for the spc
This will enable you to manually program the NAM.
Now I just need the code to modify the network settings for the data portion of the phone.

candrist said:
I was able to get a few codes out of a verizon represenative, but not everything.
This code enables the ability to use the second code I got.
*#22745927
you then enter 000000 for the spc
and change to Hiddenmenu Enable and press ok.
the type **772
you then enter 000000 for the spc
This will enable you to manually program the NAM.
Now I just need the code to modify the network settings for the data portion of the phone.
Click to expand...
Click to collapse
Verizon told me to do *228 option 2 to re-sync roaming towers to get a better signal.

[Q] rogers Unlocked samsung focus on bell - Data doesn't work

Hi,
I recieved a rogers samsung focus today.
Inserted my bell sim card, and booted. was asked for a code, i entered an unlock code i got and it was accepted.
I can send and receieve calls and text msgs, however i can not get an data on the phone, via web browser, live hotmail, or xbox app.
I accessed the diag app via ##634#, however when i try enter the root menu (*#197328640#) nothing happens
I suspect the issue is the network profile is not set to auto, and rogers manuelly configured the phone with there xml profile.
with the LG wp7 device i was using yesterday i could "SET ADC" :enable" or "set network profile", via the ##634# menu => factory menu => engineer menu => other settings
anyone have any suggestions?

apn
in settings add bells apn and it should work fine, stay out of the diagnostic menu, there shouldn't be anything there to change, I can't remeber where in settings it is but there is a spot to add an apn,

WOW that was pretty easy.
APN location: settings/cellular/add APN
Bell lists the info on their site, for reference the APN settings are;
APN: pda.bell.ca
Proxy server: web.wireless.bell.ca
Port: 80
I've added the APN to the focus and browsing and xbox live work, i wonder if adding the proxy server would make things faster/better signal? and if so, how?
On another note, when i renegotiated my plan last week MMS was added, and i was using it on my LG WP7 Device. How do i change the MMS setting on the focus?
From bell's site;
Enter the following in the Message Centre/MMS gateway field:
MMSC URL: htp://mms.bell.ca/mms/wapenc

I'm on Bell and thinking about getting a focus as well.
How is it? Is everything working correctly?
How do you go about getting an unlock code?

1. Go to the phone app
2. Dial ##634# and click Send
3. When prompted for a password type 277634#*#
4. You should now be at "Factory Menu"
5. Choose "Engineer Menu"
6. Choose "Other Setting"
7. Verify that "Set ADC" is set to Enable
8. From the "Other Setting" page, choose "Set network profile"
9. You should now be on the "Set network profile" page and in the bottom half of the window you should see a list of *.xml files. These appear to be the network configuration files.
10. Look at the filenames for the config files and take your best guess at which one to choose for your provider. I'm on AT&T and I fixed the MMS problem by choosing "_PROV_ATT_US_310_410.xml"
After you choose that *.xml profile, your MMS should be working."
The changes they are making are the ones to change the MMS capability as this can be carrier locked – outside of the phone lock/unlock status.

greener88 said:
I'm on Bell and thinking about getting a focus as well.
How is it? Is everything working correctly?
How do you go about getting an unlock code?
Click to expand...
Click to collapse
I got my unlock code through a local cellphone shop (gave him the IMBI #), downtown london(ont), not sure where he got it from, seems to have worked.
I can call and recieve text msgs but data is a bit of an issue.
You have to add APN for bell (proxy server would make things speed up unboudtably but no field for it).
It almost feel like you have to push or send a signal for data to turn on / start. usually the first time i try a webpage or bing search it doesn't work, get error " no network or wi-fi"
in terms of phone i like it better then LG optimum bell offers (had it for a week). didn't like the slide out keyboard, typing # was a pain (virtual keyboard pretty got and auto correct awesome). Also, larger screen and significantly lighter. Colours are more vivid as well, green is green not some yellow derivative.
be warned though, many many things that are lacking, january update will be interesting.
*****just tried sending picture txt no luck.....******
------- hopefully someone will figure out how to access the focus profile xml
on a side note:
after many many speedtests in London, Ont, and Hamilton,Ont; DL speed on bell caped at 3 mbps. (tests were on both LG optimum and SAMSUNG Focus)
I suspect that the $10 fee, Bell will be introducing in the next few weeks shale be to increase speed beyond this.
http://mobilesyrup.com/2010/10/18/bell-charging-an-extra-10month-for-upcoming-hspa-devices/

ManicDVLN said:
1. Go to the phone app
2. Dial ##634# and click Send
3. When prompted for a password type 277634#*#
4. You should now be at "Factory Menu"
5. Choose "Engineer Menu"
6. Choose "Other Setting"
7. Verify that "Set ADC" is set to Enable
8. From the "Other Setting" page, choose "Set network profile"
9. You should now be on the "Set network profile" page and in the bottom half of the window you should see a list of *.xml files. These appear to be the network configuration files.
10. Look at the filenames for the config files and take your best guess at which one to choose for your provider. I'm on AT&T and I fixed the MMS problem by choosing "_PROV_ATT_US_310_410.xml"
After you choose that *.xml profile, your MMS should be working."
The changes they are making are the ones to change the MMS capability as this can be carrier locked – outside of the phone lock/unlock status.
Click to expand...
Click to collapse
##634# on a focus brings up a different menu "diag" not "MFG"
anyone have any other ideas?

I live in London and have a Samsung focus to, can u tell me where is this shop?

Update?
Hey Reaver_Shadow, did you ever get your MMS to work on your phone?

ManicDVLN said:
1. Go to the phone app
2. Dial ##634# and click Send
3. When prompted for a password type 277634#*#
4. You should now be at "Factory Menu"
Click to expand...
Click to collapse
No dice - 277634#*# does nothing at the diagnostics menu. It just sits there looking at me. Are you sure this is the correct code?

the 277634#*# is for the LG MGF "app" you get installed when you dial ##634# on an LG WP7 phone it doesn't work on a samsung device. It doesn't work on mine, and i have yet to see anyne state that it works on theres.
The closest thing is a "app" that gets installed when you dial ##634# called "diag"
try entering in the diag program (found either by app menu or dialing ##634# again):
*#197328640#
and see if it works or just sits there and stares

Yeah still my biggest problem is MMS settings in the phone. Does anyone get a 3G+ symbol on the signal menu? Trying to understand why it doesnt say if HSPA is connected or not...

jessiethe3rd said:
Yeah still my biggest problem is MMS settings in the phone. Does anyone get a 3G+ symbol on the signal menu? Trying to understand why it doesnt say if HSPA is connected or not...
Click to expand...
Click to collapse
Yeah I get it all the time when downloading dada, wether its in the market place, emails or netflix...!

as for the data. I was having trouble too, then went into Settings>cellular>add APN>
and I noticed that when I was searching for a network there, it was coming up scan unsuccessful. So I deleted my APN, and scanned again, found the right network, which for me was EINSTEIN HOME, (IN WIS USA) and added internet.air.net with no password or username and now apparently Im on the data network.
Great! Now the Focus and the Quantum I have are data ready, just looking further into the MMS settings. Thanks to a link I found on here, I have the registry key that the settings are in, but unlike windows, I cant just type regedit and change the settings, so trying to find a windows phone 7 regeditor to change that and all set. Will post if I find one. Thanks again guys. ohh and I saw someone is on this, (the MMS settings already, if I see a solution there too Ill post it as well. Good luck!

I got it to work on my Focus Bell Canada using the following thread:
http://forum.xda-developers.com/showthread.php?t=924497
Very very happy

CDMA DIALER CODES (Sprint)

Confirmed working Dialer Codes for Nexus S 4g-Sprint:
*#*#3282#*#* Data Programming(Data Profile, DDTM, Roaming Orig. Vocoder, EVRC-B, Home SID, USB Charging, RTSP/HTTPPD ports & addresses, Browser Gateway, MMSC URL)
*#*#33284#*#* Debug Menu(1x/EVDO Engineering, , Data Status,Debug Screen, Test Calls, RC Data, HDR/1x Selection, Voice Privacy, DTMF Set, Korea Mode Set)
*#*#786#*#* Hard Reset(Wipes/Resets Data/Profile & internal storage!)
*#*#(your msl)#*#* Service Menu(Phone Number Change)
*#*#8778#*#* Phone Utility(UART/USB Modem & PDA Selection)
*#*#4772579#*#* GPS clear(reset)
*#*#4636#*#* Testing menu(Phone, Battery & Wifi Info, Usage Statistics)
*#*#8255#*#* Gtalk Monitoring(Monitor Gtalk Activity)
*#06# MEID number(Display's your IMEI)
*228 Phone activation(Activate your phone)
*#*#2432546#*#* Checkin(Manually check for System Updates)
*#*#72786#*#* SCRTN(Factory default value for DSA selection)
Keywords: dialer codes, hidden codes, epst codes
Thanks Joeykrim, jp22382

anyone know any more to post for others?

*#*#4636#*#* - Testing menu (Phone info, Batt info, Usage, Wifi info)

OP updated
Uncle Jimmy Says Hello

snandlal said:
These are dialer codes confirmed working:
*#*#3282#*#* -Data Programming
*#*#33284#*#* -Debug Menu
*#*#786#*#* -Hard Reset
*#*#(your msl)#*#* -Service Menu
*#*#8778#*#* -USB Modem Mode
*#*#4772579#*#* -GPS clear (reset)
*#*#4636#*#* -Testing menu
*#*#8255#*#* -Gtalk Monitoring
*#06# -MEID number
Thanks Joeykrim, jp22382
Click to expand...
Click to collapse
saaa-weeet

Is there any way I can manually update my Prl with this?
Sent from my Nexus S 4G using XDA App

taappel said:
Is there any way I can manually update my Prl with this?
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
Do you mean from a file? I don't think so. That seems to be something only htc puts in their phones. Qpst or cdma workshop might do the job.

Can we get something in the OP that explains what each of them does or what we can do with each of them?

I wish there was a way to change the vocoder for aosp roms on the sprint network. If there is can anyone please instruct?
ropodope
Sent from my Vaelpak GB AOSP Preview Edition v0.2.1 for evOG. No bricks here.

Bump. I found this very useful. I know it was here I just couldn't find it.

for faster access.. use the Any Cut app to create shortcuts to whatever hidden menus you use the most. gpsclear, debug and usb modem are the 3 i use the most personally.

OP updated with code for checkin System Updates manually.

OP updated for DSA default

OP updated with code for activation and additional warnings

8778 not working
I'm trying to perform the hybrid prl hack and *#*#8778#*#* is not working on newest stock rooted rom. Anybody else having difficulties? Has this code changed?

Which one lets u roam only
Sent from my Nexus S 4G using XDA App

1. *#*#debug#*#*
2. Enter msl
3. Select "others"
4. Select "HDR/1x selection"

*#*#3282#*#* Data Programming(Data Profile, DDTM, Roaming Orig. Vocoder, EVRC-B, Home SID, USB Charging, RTSP/HTTPPD ports & addresses, Browser Gateway, MMSC URL)
^---- not working for me, the dialer just clears but no menu, any ideas? Sprint NS4g

amosher13 said:
*#*#3282#*#* Data Programming(Data Profile, DDTM, Roaming Orig. Vocoder, EVRC-B, Home SID, USB Charging, RTSP/HTTPPD ports & addresses, Browser Gateway, MMSC URL)
^---- not working for me, the dialer just clears but no menu, any ideas? Sprint NS4g
Click to expand...
Click to collapse
Go to applications-->manage applications-->hit the "all" tab and see if "com.android.sprintmenu" is listed. If it is not there install Sprintmenu.apk and try again.

snandlal said:
Go to applications-->manage applications-->hit the "all" tab and see if "com.android.sprintmenu" is listed. If it is not there install Sprintmenu.apk and try again.
Click to expand...
Click to collapse
strange, thanks for the tip. it doesnt show in manage applications > all either as com.android.sprintmenu or SprintMenu.apk but it is in the /system/app folder. i'll try to replace it with a different one to see if that helps. i'm on the stock grj90 deodexed from http://forum.xda-developers.com/showthread.php?t=1078213.
still no, pulled the sprintmenu.apk from here http://forum.xda-developers.com/showthread.php?p=16714907#post16714907 and replaced the one in system/app with the ACS one, still nothing. once i complete the code it just clears out and no menu.

HowTo: Activate TruPhone SIM on Verizon Prepaid Moto E Instructions

Long time reader first time poster, hopefully this is helpful to others.
These are my notes on how I activated a TruPhone sim on the PrePaid Verizon Moto E (which goes on sale for ~$50 periodically).
These instructions will _likely_ also work for AT&T, TMO, and their MVNOs (but I haven't tested).
Extra notes added that may be helpful to some.
My notes are in a fixed width font so...
Code:
[SIZE="2"]
not sure if necessary but i did:
- before initial power up install non verizon sim
if did not, reset device to factory after installing non verizon sim
.
go through initial setup using wifi
- phone activation, this sim not vzw, <use wifi>
- setup wizard, <next>
- select wifi ..
- about privacy <accept>
- add account, <skip>, <skip anyway>
- google svcs, unchk helpx2, <next>
- summary, <done>
- welcome
.
optional:
- settings/display/sleep after 5mins of inactivity (30secs is a real pain)
- settings/security screenlock=none (again a real pain)
- create a new gmail address for phone if desired
.
getting verizon moto e to be a gsm+lte phone instead of cdma+lte
- currently must be on 5.0 android for network app to work (see below)
- google play store:install "network" app by phillip mangelow
- turn off wifi (settings/tapOnWifiIcon)
- run network app
- tap turn off radio btn
- set preferred network type
- tap radio select drop down (found just above turn off/on radio btn)
- select lte/gsm auto (prl)
- tap turn on radio btn
- quit out of network app (showAllApps/swipeAway - all done with it now)
- go into phone settings (swipe down from top)
settings/more/cellularNetworks/prefferedNetType
select 4G (recommended)
settings/more/cellularNetworks/networkOperators
choose att (or tmo if available)
note you will get a notification saying No Service on ATT since you
haven't activated yet
- now you are ready to activate service on truphone
.
truphone sim activation (follow procedures in manual shipped with your sim
- goto truphone.com
- click consumer
- click activate your sim
- enter sim id,next (id found on card that held sim
- open myaccount link in new tab, login to myAccount to get activation code
- copy/paste activation code into prior tab,next
- power off phone, power back on (so phone sees newly active sim)
or you can try this (thought of later so not sure if it'll work)
settings/more/cellularNetworks, search and choose ATT or TMO
- make a call and receive a call to confirm it is working
- remember incoming calls are free in US so test delay/quality on incoming
(quite large for me: about 1sec, I can say "one-one-thousand" on
my landline completely before I hear it exit the cell phone)
- you will get notifications stating "sim card not verizon", simply ignore
- done!
.
data use prevention
- data on truphone can be expensive when roaming out of country,
$4.50/MB in Canada vs 9c/MB in US, i prefer to leave cell data disabled
and rely only on wifi for data for this rarely used phone
- settings/dataUsage, flip switch to off
- the above apparently will not disable the smaller amt of
background data happening. to disable background data:
settings/dataUseage, view list of apps scrolldwn, chk restrict bkgnd data
for those apps you wish only to have wifi (which 4me is all of them)
(note i had an empty list after reboot. so YMMV)
- a kid/senior safe way to do this is to NOT add APNs under the section
settings/more/cellularNetworks/networkOperators
or to ensure that the APN info is modified with DONTUSE_originalAPname
to prevent access, BUT APN info is locked out on truphone sim
- verify cannot connect to google play store then turn wifi back on
- playstore/menu/settings/general/autoUpdateApps = over wifi only
(is usually the default setting)
- settings/more/cellNetworks/globalDataRoaming = deny
.
icons top of screen
- see moto manual:
google "moto e 2nd gen manual" and should be the first link
- initially on top left will see phone icon and lock icon
that are reflections of what is under notifications instructing you
to set up lost phone features and security pin
- icons on right will show ATT with R for roaming and possibly a H with
a crossed out circle beside it indicating hotspot disabled
.
update notifications disabled
- accidental install of the android 5.1 update will currently (June2015)
disable the network app from working preventing selection
of LTE/GSM vs LTE/CDMA
- if android update is downloaded already it will continue to show up
so longpress the notification, select "i", then it will
bring up MotorollaOTA app, enable "Block"
or alternatively simply go into
settings/apps/all, select MotorollaOTA, uncheck notifications
(reverse this if you want the update notifications back)
- settings/apps/all/googlePlayServices uncheck show notifications
this will disable all update notifications but is important to prevent
accidental install by senior parents and their "helpful" friends for now
see: forum xda-developers com moto-e-2015 general how-to-verizon-moto-e-2015-gsm-network-t3098953
google: "xda-developers moto-e-2015 general how-to-verizon-moto-e-2015-gsm-network"
.
verizon apps disabled
- verizon apps are all red icons
- enter apps drawer (6 dots in white circle)
- press and hold on each red icon app/app info
you wont be offered the option to uninstall if it is a core component
like a verizon app
tap force stop/ok, tap disable/ok, uncheck notifications/ok
note this will remove from app drawer but they can still be found
under settings/apps/disabled
list:
backup+contacts (use google to backup your settings and contacts
(note backupAssistant will still run in bkground
message+ (use google hangouts instead)
. my verizon mobile (login to your providers website)
. mobile hotspot (pretty sure this is verizon version)
vz navigator (use mapfactorGPS free, offline maps no data use
nfl mobile (more vzw bloatware
- default messaging app should now be google hangouts check via
settings/more/defaultSMSapp -> set to hangouts if not already that
- now shut down those that are not in the app drawer:
settings/apps/all
tap force stop/ok, tap disable/ok, uncheck notifications/ok
verizon login
vzw apn
.
google hangouts dialer installed
- this allows you to make calls for free via wifi
- google play store search "hangouts dialer", install (free)
- call to USA and to Canada free from USA/Canada/HangoutsCountries
"Almost all calls to the U.S. and Canada are free from all countries where
Hangouts calling is available."
List of countries where calling-from is unavailable:
google: "support google com hangouts answer 1267644
.
senior citizen tweaks
- keep it simple for the parents
- move everything off other panels so just on one home panel
(only one dot shown above app drawer's 6dot icon)
- add calc into empty slot beside phone (note that you
can access messaging now through hangouts dialer icon)
- put hangouts dialer app at top right near google bar (far away
from regular cell phone calling app)
- put maps in top right corner (my parents have sworn off GPS but Dad
likes to lookup his route before he leaves home - otherwise consider
installing mapfactor but note it has a crappy UI)
- remove google apps folder and remove google play store
and get at these through the app drawer when needed
- left with:
--google bar----------------------
hangoutsDialer maps
.. ..
.. ..
phone calc appDrawer chrome camera
.
Verizon prepaid Moto E LTE notes
- can be bought for $50 on sale (Walmart/BestBuy)
- can be used on ATT & TMO and their MVNOs
- verizon moto e prepaid = US moto e LTE but replaces GSM 900/1800(Europe)
with CDMA 800/1900 (see fcc sar report)
google: fccid net document php id=2514233
specs of motoE sold by verizon xt1528 MOTXT1528PP
google: fccid.net number php fcc=IHDT56QC8&id=918760
exhibits tab/testReportSarSupplemental
page3 of google: fccid net document php id=2514280
- most Canadian majors are UMTS and above only (3G GSM), no CDMA, no 2G GSM
this phone _should_ work well in Canada (haven't tested)
- remove side band to access sim, use fingernail in notch on corner
next to the usb/charge port
- stay on android 5.02 for now, cannot run network app after upgrading
(as of June2015)
you have to specifically okay the update it won't do it without your ok
see xda-developers link above for the latest on this issue
see how to turn off notifications above also
- see moto e 2ndgen manual for the minimum info you should know:
google "moto e 2nd gen manual" and should be the first link
- perhaps if you have a previously activated sim you can avoid installing
the network app YMMV (didn't try activating sim first on truphone
website, but it might be worth trying, report back if you do this)
.
truphone notes
- truphone minutes never expire as long as you make a 9cent call or text
once every 6months, so the $15 on your sim can last you a long time
great for a rare/emergency use phone
google: www truphone com row consumer Rate-checker
(note difft tabs for sim vs app)
Canada voice in/out 40c/min, US voice out 9c/min, US voice in free!
- i am in a att-only serviced area, truphone uses tmo first then att
but activation procedure still works even in the att only scenario
- truphone now ships a combo standard/micro/nano sim card independent
of what sim you order but you want a micro for moto e, carefully
break out the micro portion without breaking out the nano portion
- google "Truphone SIM Critical Information Summary"
google: www truphone com au Legal Critical-Information-Summary Truphone-SIM-Critical-Information-Summary
(Australian summary of T's&C's written in plain English)
This is a Prepaid plan with no minimum term. Prepaid credit does not
expire, so long as you continue to use the service every 180 days, the term
will continue.
- T's & C's
google: www truphone.com us Legal Ts--Cs Truphone-SIM
see sect 2, sect 7.10
.
more notes
- tapping settings/more/mobile plan, then CANCEL!
caused me to drop off of ATT, to get back onto network you can
reboot or simply go to
settings/more/cellularNetworks, search and choose ATT[/SIZE]

Prevent Update Nag Screen (without root)
If you are a little tech savvy you can install google's adb on a computer and perform the following commands on your device to prevent the annoying update reminders:
Code:
adb shell
am force-stop com.motorola.ccc.ota
pm hide com.motorola.ccc.ota
Note that for 5.0+ android os, the "hide" command is very similar to the old "disable" command. Rooting your phone (which gives the ability to become super user) is not required to "hide". Hide basically prevents these apps from starting after reboot (complete power off/on).
adb install/useage notes:
You have to put your phone into developer mode (settings/aboutPhone, tap build number 10X)
In my case I installed adb on a chromebook running crouton/ubuntu and it worked quite well.
Code:
sudo apt-get install android-tools-adb
sudo apt-get install android-tools-fastboot
downloaded ini file and put into: ~/.android/adb_usb.ini
google: github.com apkudo adbusbini
it takes a while (wait at least 60secs) after you plug in the cable for it to prompt you that phone wants to go into debug mode
i had a heck of a time since my usb cable which was fine for charging was a dud for data, changed the cable and all went smoothly.

YotaPhone 2 - Service Menu

In order to get into the service menu you need to dial the code below. You can check for example, the battery temperature , etc...
Code:
*#*#4636#*#*

this is no Yotaphone Service menu but its normally Android service menu
https://forum.xda-developers.com/yo...otaphone-2-signal-boost-trick-unlock-t3531682