Database Users

How to cardflash with hareld?

Hi
does anyone know how in need to call the "ARTEIMG.nbh" with the hareld when I am using this manual:?
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it from your computer using a card reader (in some cases format doesn't work).(not necessary, do it only if 1st attemt fails)
Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
Rename the .NBH file to ARTEIMG.nbh and copy it to the root folder of your microSD card.
With microSD card inserted on the phone, start the bootloader (The bootloader is invoked by pressing down the Record button and using the stylus at the same time to press the RESET button at the left side).
You should see the screen pictured on the left, confirm flashing on screen by pressing the volume slider down.
Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
SuperCID devices are able to flash any NBH image using this method.
Click to expand...
Click to collapse

some few more question
witch of these files do I need to give the name???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

does nobody has experience with this???
I really need to do this so I can send it to repair...

haha problem solved.
In someway my phone was able to connect with my pc with a broken usb. haha
In bootloader mode it just worked

Why do you want to update your rom this way?
It is much easilier with the HARD-SPL or USPL.
Look a bit around the herald forum and you will find these methods!!!

Yes I know but my usb connection in my phone broke down, so i need to send it to repair.
But i had the touchit rom on it, so with that rom I didnt had any garantee

Stock US rom anyone?

Has a anyone received a copy of the Stock rom (update.app) yet? Waiting for it so I can bootloader unlock and dig in.
Sent from my ONEPLUS A3000 using Tapatalk

I have just ordered this tablet from China, I might need this rom in the next few days. It would be grateful if anyone can upload this rom.

As far as I know there has not been an update released for the US tablet. It's just a matter of time, I hope.
@avocadopat I would say you are better off to leave what you have on the tablet you bought and select English as your language. US software disables 5GHz wifi and no telling what else.

OTA, not full in firmware finder but......
If I put the c128b003 OTA(us version wifi?) update.app in a dload folder on the root directory and did the Vol up, vol down, power button press and it seems to update but the about screen does not reflect this. Any ideas why? Is there a way to flash the update.zip without extracting the update.app from it?

tdamocles said:
If I put the c128b003 OTA(us version wifi?) update.app in a dload folder on the root directory and did the Vol up, vol down, power button press and it seems to update but the about screen does not reflect this. Any ideas why? Is there a way to flash the update.zip without extracting the update.app from it?
Click to expand...
Click to collapse
If you look at the content of the update.zip archive, you'll see that it contains a number of .patch files and update.app. These .patch files are actualy the modifications for system and other partitions (patch file name corresponds the partition). They contain only differences between the new version of firmware and your current. Moreover, these patch files can be applied only to a certain version of firmware (the one they're made for). The last question is what is the update.app made for? It is made for updating other partitions, like modem, oeminfo, etc. I think the reason for this is that patch files are made with android build system and other partitions have no relation to it, so they're built somehow else. So, if you say you succeded updating, you actually had updated only service partitions, not the system itself (or maybe you actually had updated even nothing, because we don't know how smart Huawei recovery is).

Well then, I do have the btv-w09c128 and the ota is the c128. How do you update with the full zip then?
My version now is c128b002.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Stock rom MediaPad M3 BTV-W09 (WiFi) version US
tdamocles said:
Has a anyone received a copy of the Stock rom (update.app) yet? Waiting for it so I can bootloader unlock and dig in.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
---------------
I need Stock rom MediaPad M3 BTV-W09 (WiFi) version US 32GB.

Try this app
Try this app see if it identifies your firmware and you can update to a new one:
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder.donate

can someone give me BTV-W09C128B002 stock firmware? Can't find it anywhere.

Need this ROM as well.

hard bricked!

hi there,
i was using miui 9 7.10.12(ported) , all was fine until an update came that was miui 9 7.11.16. I downloaded the firmware using the updater app and rebooted to recovery for installation from the updater app itself. and from that time nothing is workling. only thing which is working is that the mobile is being detected in the device manager as desired that is qs hsb qdloader etc etc. tried all the methods which are qfil,downloader and miflash. the screenshots are below given. any help would be appreciated especially from sasukay or any other senior members. Thanks in advance :fingers-crossed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Just insert battery and then connect your mobile to pc by hoding both vol+ and vol- buttons and click download
u can use anyone Qfil or lenovo downloader.
rest u can take help of me with another option of opening yout phone then shotting pins to get qualcom port in pc.
fb:[email protected]
whatsapp:-+919803235381

Lenovo problems
hey , if your phone is working position
1 . take backup of contacts
2. reset to factory /original mode - hard reset - format all things wipe !
thanks
Jarvis_official said:
hi there,
i was using miui 9 7.10.12(ported) , all was fine until an update came that was miui 9 7.11.16. I downloaded the firmware using the updater app and rebooted to recovery for installation from the updater app itself. and from that time nothing is workling. only thing which is working is that the mobile is being detected in the device manager as desired that is qs hsb qdloader etc etc. tried all the methods which are qfil,downloader and miflash. the screenshots are below given. any help would be appreciated especially from sasukay or any other senior members. Thanks in advance :fingers-crossed:
Click to expand...
Click to collapse

Jarvis_official said:
hi there,
i was using miui 9 7.10.12(ported) , all was fine until an update came that was miui 9 7.11.16. I downloaded the firmware using the updater app and rebooted to recovery for installation from the updater app itself. and from that time nothing is workling. only thing which is working is that the mobile is being detected in the device manager as desired that is qs hsb qdloader etc etc. tried all the methods which are qfil,downloader and miflash. the screenshots are below given. any help would be appreciated especially from sasukay or any other senior members. Thanks in advance :fingers-crossed:
Click to expand...
Click to collapse
Don't panic. Copy the ROM/Firmware files to C:\Qualcomm\QPST\bin\ - Next is restart QFIL, re-select the required files with the new "LOCATION/PATH" which is the one you copied.
Now, remove your phone from computer and then click on Download in QFIL. Connect your phone by pressing Volume up and down.
Good luck!

@Jarvis_official, I think you are in good hands. It shouldn't be much of a problem if your device was detected. You only need to check directories correctly.

Test poin huawei p9 lite Dont Work

when I run the test point, my huawei p9 lite is detected as USB SER as I can solve? I have all the HiSuite drivers installed

The Huawei VNS-L21 phone when connected to a computer is defined as
USB -SER. (Fastboot not available, only black screen) Installed driver Huawei USB COM 1.0 Using the program DC-Phoenix 0.0.0.52 and the file VNS-L21 _MAA001027_Board Software_inc_testpoint.dgtks

PaShket said:
The Huawei VNS-L21 phone when connected to a computer is defined as
USB -SER. (Fastboot not available, only black screen) Installed driver Huawei USB COM 1.0 Using the program DC-Phoenix 0.0.0.52 and the file VNS-L21 _MAA001027_Board Software_inc_testpoint.dgtks
Click to expand...
Click to collapse
the drivers are not installed

Nozomi9090 said:
the drivers are not installed
Click to expand...
Click to collapse
In order for them to be installed, you need to disable the digital signature verification in Windows

Ok driver installed, Huawei usb COM 1.0 is visible!!!
My phone have black screen, use dc-phoenix?
NB: Dc-Unlocker :
DC - Unlocker 2 Client 1.00.1299
Detecting phone :
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Phone not found !

Nozomi9090 said:
Ok driver installed, Huawei usb COM 1.0 is visible!!!
Phone not found !
Click to expand...
Click to collapse
Click the Download button.
In the search field write VNS
And download VNS-L21 _MAA001027_Board Software_inc_testpoint.dgtks
In Advansed mode flash file
Not DC Unlocker. - DC_Phoenix_v52

PaShket said:
Click the Download button.
In the search field write VNS
And download VNS-L21 _MAA001027_Board Software_inc_testpoint.dgtks
In Advansed mode flash file
Not DC Unlocker. - DC_Phoenix_v52
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ok mate, and now? Help me please ç_ç
NEWS:
I have flashed firmware (VNS-L31C900B058) and block installing to 5%.

Can you manually switch to upgrade mode? (Press Powerbutton, Vol+ and Vol- simultaneously)
Also your OEM-Info seems to be corrupted (C900)...

Nozomi9090 said:
Ok mate, and now? Help me please ç_ç
NEWS:
I have flashed firmware (VNS-L31C900B058) and block installing to 5%.
Click to expand...
Click to collapse
how did you get to the fastboot mode screen on test point? was it different type of windows?
Becasue when i do it. its a blank black screen all the drivers are installed.
Can you may be share the software to google drive?

Brogotek MTK8667 Head Unit wont recover

Hi all
I have one of these https://www.ebay.co.uk/itm/384770479698 in my 2006 Merc. its a MTK8667 Android 11 based unit. FF_866X is the device name, i'm sorry I do not know the MCU
I was sent some update files from the seller https://we.tl/t-UeDC40i6Ul XRC-8667 升级软件 Q腾实UI多合一-国外-1280x720_v32_20220223
Upgrade steps
1) Unzip after downloading (only unzip once)
2) Copy the file to the U disk
3) Connect the U disk while the power is on
4) The machine will automatically upgrade
5) If the machine cannot be upgraded, you need to press RES and keep touching the display with two fingers
during the update process it copied the superimage ok but then something came up in red but it came up to a kind of recovery and said erasing... it then rebooted it gets to the car logo screen, before android screen then goes to a blank screen with the following in bottom left corner...FASTBOOT MODE and wont go any further
I have pressed RST then two fingers on screen until i get "detected" but all i get is the same fastboot mode again,
I have redownloaded and extracted the firmware and reformatted my usb drive to fat32 and tried the whole process again and tried in both usb slots but no sucess...what can I do?? is it broken??
I have obtained other mtk8667 firmware files 8667.bin and 8667.upd from this topic https://forum.xda-developers.com/t/firmware-junsun-v1-8667q-8g-128g-vhd-qled.4405475/ on this forum but I have tried many different ones and it just wont read the usb, still just goes straight to fastboot mode....is anyone able to help me I have messaged the seller but no reply
So far I have tried about 7 or 8 different firmware versions, the sellers own, some junsun versions, ossuret versions even xtrons versions(all in correct format of 8667.bin and 8667.upd on root of usb formatted to fat32 but it does not read the usb.
The usb slots are still working as I can plug my phone in and it charges but the unit does not seem to have a full recovery mode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have messaged the seller (brogotek) on ebay but no reply as yet which is strange as they have always replied very quickly.
Do you think it is fixable? it was bought in April and ebay advert states it comes with 12 months repair or replace warranty
There just seems no way to get into any kind of recovery mode