Ts9,4gb/64gb android 10, Opel insigna - Android Head-Units

Helo guys
I bought an vertical screen for Opel insignia ts9,android 10 and i Have a problem
Canbus box do not work;the canbus îs not View in ts9
Steering whel controls also not work
În the menu fiind only Astra j,seler was sent my an update and after update soft also canbus box not work, steering whel controls not work...
Any canbus box setting not work..
Any sollution pleasse?

I have same problem, with same HU and Canbus in ford fiesta... Any solution please

Related

Joying VW Unit (Sofia) with universal Steering wheel controller

Hi there
I have a Joying VW Unit with Sofia and GTX Rom. It has the canbus option, but my car doen't have factory steering wheel buttons.
I ordered the joying universal steering wheel controller (not the bluetooth version).
This one:
https://www.youtube.com/watch?v=odnEb-1b310
In the comments they say it's not possible to add this controller to a vw canbus unit.
Is it just software? Any way to bring the unit to "universal" unit? Or any way to skip the canbus option?
Regards
ch_swat_89
ch_swat_89 said:
Hi there
I have a Joying VW Unit with Sofia and GTX Rom. It has the canbus option, but my car doen't have factory steering wheel buttons.
I ordered the joying universal steering wheel controller (not the bluetooth version).
This one:
In the comments they say it's not possible to add this controller to a vw canbus unit.
Is it just software? Any way to bring the unit to "universal" unit? Or any way to skip the canbus option?
Regards
ch_swat_89
Click to expand...
Click to collapse
They are correct, in units that use canbus, the key1 and key2 wires are used to talk to the canbus module. You need the Bluetooth version.
... and if i don't need the canbus module? Actually it's just to show door open. i really don't need it.
Or is it hardware based and i have to do soldering work?

Wanqi HU - Steering Wheels Buttons Problem

Hi there:
Car is 2016 Nissan Qashqai J11 TS. I have installed a Wanqi HU Android 8 and after installing my steering wheels buttons stopped working. I changed the Canbus protocol to Xtrail/Qashqai but still unable to make the buttons working. Can anyone recommends me a way to solve this problem?
Best Regards
Contact the reseller?

[Help] PX6 RK3399 Steering Wheel Controls & Dash Board 2013 Ford Fiesta ST

Hi all,
Recently had an Android 10 PX6 RK3399 Head Unit installed into my 2013 Ford Fiesta ST. Everything works great on the HU itself, however, the buttons on my steering wheel for volume up/down and skipping tracks do not work. Also, the physical buttons on the Sony System (also volume up and down etc) under the screen do not work either.
I have checked all my Canbus settings and they are the correct ones for my CanBus decoder. I have also checked with the supplier and they said that it is the correct decoder for my vehicle. I am unable to map these buttons because they are not registering in any mapping program. I have checked factory settings and nothing there seems to change anything.
Any ideas on how to fix this? Could it possibly be that the Canbus decoder is not working?
CanBus Decoder: FD-SS-05A
Model: PX6
Android Version: 10
Build Number: RK3399
MCU Version: MTCE_MX_V3.57_2
Images: https://imgur.com/a/OA86sVR https://imgur.com/a/12ks1gN
Thank you

Bosion PX6 SWC not working with Connects2 CTUAR01 interface Alfa Romeo Giulietta

Hi, I have a Bosion PX6 HU with DSP and I am trying to set the SWC properly on my car i use a Connects2 CTUAR01 interface (Alfa Romeo Giulietta) to convert the canbus signals to the Bosion HU. At the moment only 3 steering wheel buttons work, what is the correct setting? do I need to change the radio's canbus setting?

Sinosmart android head unit steering wheel buttons not working

Hi all just fitted a Sinosmart head unit for a Nissan quashqui j10 but the steering wheel buttons will not program any ideas how to fix this ? Purchased from Ali Express. Info supplied not great.
What does seller suggest
what has been tried
what is head unit - post android system head unit including MCU version
Said they are sending ma a new cable but not sure that’s going to work as canbus not recognising
Have you connected to power to the canbus unit. Mine hasa separate power connector. Took me weeks to realise I had not connected it.
Mike Tigerman said:
Hi all just fitted a Sinosmart head unit for a Nissan quashqui j10 but the steering wheel buttons will not program any ideas how to fix this ? Purchased from Ali Express. Info supplied not great.
Click to expand...
Click to collapse
Hii, first check canbus if connected right, then when in Androisd go to car settings / infotainment - info of device and enter factory settings with pin 123456 or 8888, find canbus menu for updating (not system !) and update online (choose your model of your car and year, canbus name must be exact as says at the background of the canbus box - raise, general, hiworld etc.) or offline (via USB DRIVE if seller sent you to import correct files into unit).
When downloaded correct settings for canbus , updated and restarted with correct settings car functions will work.

Categories

Resources