Database Users

[SOLVED] Strange Wifi problem, need help

Hi
I have a problem about accessing internet using wifi. I connect to network, it's ok. But after nearly 30 seconds i cant access internet anymore. My phone says everything is ok, i am connected to my modem, my internet connection is ok but i cant use it on my HD before turning off- and on- my wifi. But i can only use internet for a short time again.
I tried hard reset but everythings is still the same. I am using BlackstoneHenge max stability&speed rom.
So what causes that problem? What should i do?

have you tried turning off your router and turning it back on after a few minutes ?

also try and set the wifi signal strength of the blackstone to performance and not battery. that way, the signal will be stronger and probably not drop. i had the same issue yesterday after flashing another rom, without setting it to full performance, the wi-fi would constantly drop signal and even when i was connected, it would not access the internet properly.

thanks chef_tony and mjuksel
i disabled power save mode of wifi and set to performance mode as you suggested. my problem looks solved now, thanks so much

Solved, thread closed

[Q] WiFi works fine but takes ages to reconnect after falling back to 3G data

Hi all
I've been running CM 10.2 for a while and had no problems with it, but wanted to upgrade to Kit Kat so I flashed CM 11 via the Installer apk. Everything works great except I'm finding that if I go out of WiFi range and the phone falls back to 3G data, it won't reconnect to WiFi when I come back within range (e.g. when I get home from being out). Further details:
- manually reconnecting through settings DOESN'T work... it sees the networks but hitting 'connect' does nothing
- disabling the modem entirely via flight mode and then re-enabling DOES work... WiFi reconnects automatically
- the phone WILL reconnect by itself without flight mode but only after quite a long while
Anyone else experienced this behaviour and know of a fix?
Thanks!

Slow WiFi connection after receiving August 2016 update

Hi All,
Need help on how to fix my wifi connection. I received the August 2016 update on my s7e and after installing it, seems that any app I open that needs wifi connection tooks forever to load like youtube and instagram. When I tried to switch on my LTE, everything is loading fine. And tried it also on office wifi, seems everything is fine also. Connection at home works well with other devices. its just slow on my phone after the update.
tried to change the channels on my ac router but still encountering the same. i tried also to forget the wifi on my phone and connect again, reset network settings and still having slow connection.
Please help what other things i need to try to restore the wifi connection. I'm avoiding the restore factory settings as it will took a while for me to restore everything on my phone.
Thanks!

Please Help!! 8227_demo wifi problem!

Hello guys. i have 8227_demo brand head unit. i have a problem with wifi.
I seem to be connected to wifi or hotspot, but I cannot receive any data. The page opens the you first connect. However, after that, ten seconds later the internet connection is gone (by the way it seems connect to wifi). Does anyone have a solution?
I tried different wifi points, but the result is the same.
Thanks for your help in advance.

Partly solutionI have now removed the GPS port and use it this way because internet c
As I mentioned in the previous post, I had a wifi connection problem. For now, I have solved the wifi problem in an interesting way. I have a YT9612c model device. I disassembled the device and checked all the connections. In the meantime, when I removed the GPS input, I noticed that the wifi works without any problems. However, the internet connection was lost again after connecting the GPS antenna input again. I have now removed the GPS port and use it this way because the internet connection is important to me.I have now removed the GPS port and use it this way because the internet connection is priority for me.
I reported the situation to the seller. Let's see how we will solve the GPS status.

Help! YT9213AJ Wifi drops connection without internet access

Hello,
I have a Wifi problem with a YT9213AJ unit.
I bought it to install in a boat and go fishing, I bought a SonarPhone SP200 transducer that connects via Wifi but there is no way to maintain the connection, with other mobiles it works well but what I want is to see it on the screen of the boat. Everything works perfect, except a problem in the WiFi when the connection does not provide internet access as is the case with this link. Constantly (every 30sec approximately) it drops the connection and reconnects automatically and then disconnect from the APP.
I have tried all the possible configurations of the WiFi and the versions that I could of the firmware for the YT9213AJ (until having to restore a dump by leaving it as a brick with no sound or button lights “thanks iceblue1980 for your post - [SOLVED] YT9213AJ and YT9216B - Full brick recovery / custom mods - ROOT, TWRP, VIPER4Android— “)
Are there any settings for that version that fix the problem and always keep the WiFi connection even if I don't have internet access?
Thank you very much in advance
Jesus

ansareo said:
Hello,
I have a Wifi problem with a YT9213AJ unit.
I bought it to install in a boat and go fishing, I bought a SonarPhone SP200 transducer that connects via Wifi but there is no way to maintain the connection, with other mobiles it works well but what I want is to see it on the screen of the boat. Everything works perfect, except a problem in the WiFi when the connection does not provide internet access as is the case with this link. Constantly (every 30sec approximately) it drops the connection and reconnects automatically and then disconnect from the APP.
I have tried all the possible configurations of the WiFi and the versions that I could of the firmware for the YT9213AJ (until having to restore a dump by leaving it as a brick with no sound or button lights “thanks iceblue1980 for your post - [SOLVED] YT9213AJ and YT9216B - Full brick recovery / custom mods - ROOT, TWRP, VIPER4Android— “)
Are there any settings for that version that fix the problem and always keep the WiFi connection even if I don't have internet access?
Thank you very much in advance
Jesus
Click to expand...
Click to collapse
This is a common problem with these units. The reason is that there is no WiFi antenna. All there is is a loose cable on the back. You can also see that your download speeds are probably around 1-3 Mbit/s instead of 40-50 mbit/s.
I'm afraid there isn't much you can do with software. You need to add antenna. You can check out the video in my signature for some tips and PM me if you want in-detail instructions but be prepared to open up the unit and solder.

iceblue1980,
Thank you very much for your quick response. That may be it, although normal internet connections work reasonably. However, I will try to follow your advice and increase the WIFI gain by improving the antenna. I have seen your signature, but I do not see details of how to do it, I am writing you a PM in case you can give me any indication for it, I thank you very much for your help.
Greetings

Fixed up!!!! Now the connection is stable, it was not because that connection did not have internet access, it was a gain problem in the Wifi signal.
Thank you so much for everything