Widevine is currently L3, but I need it L1.
Oneplus 8 Pro IN2020, 11.0.4.4.IN11BA
Radioactive kernel 2.1.4
Magisk 22.0, manager is already hidden, reboot done. Widevine is still L3.
What am I missing?
Maybe something in this recent thread:
Drm downgrade
Hi, i have oxygen os 11.0.2.2 and a few days ago i realiesed that my drm level downgraded from l1 to l3 randomly, i also red that other users have been experiecing this. Do you have any solutions? Thank you
forum.xda-developers.com
galaxys said:
Maybe something in this recent thread:
Drm downgrade
Hi, i have oxygen os 11.0.2.2 and a few days ago i realiesed that my drm level downgraded from l1 to l3 randomly, i also red that other users have been experiecing this. Do you have any solutions? Thank you
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks man. I did a little read-up on the issue and it looks like a mess. There is basically no straightforward way to fix the DRM level. I've tried deleting data/cache, reinstalling Netflix, whatever possible solutions I found and they didn't work.
That method with rolling back to Android 10 could possibly work, but I'm not going that route. It's too much to do to fix a little issue, and even then it's not guaranteed to work.
It may be easier than you think. I'm on an Op8T 5G but the devices are similar. Install HideProps in Magisk https://forum.xda-developers.com/t/...safetynet-prop-edits-and-more-v5-4-0.3789228/ then from a terminal emulator (like Termux) type (separate lines are semicolons: su; props; then go through the list of approved uploaded fingerprints and select an EU one for your same device. Then reboot. Worked on my Op8T when my Widevine dropped to L3 after a BL unlock. Right back to L1 after. Good luck!
Use Magisk Hide Props config direct link here install in Magisk: https://forum.xda-developers.com/attachments/magiskhidepropsconf-v5-4-0-zip.5189681/
mslezak said:
It may be easier than you think. I'm on an Op8T 5G but the devices are similar. Install HideProps in Magisk https://forum.xda-developers.com/t/...safetynet-prop-edits-and-more-v5-4-0.3789228/ then from a terminal emulator (like Termux) type (separate lines are semicolons: su; props; then go through the list of approved uploaded fingerprints and select an EU one for your same device. Then reboot. Worked on my Op8T when my Widevine dropped to L3 after a BL unlock. Right back to L1 after. Good luck!
Click to expand...
Click to collapse
I've had a fingerprint installed for EU firmware, but it still doesn't help. I pass SafetyNet, but Widevine is always L3. I'm starting to think this has something to do with the fact that I flashed EU firmware onto Chinese (IN2020) phone, in order to get faster updates, than for International firmware. Anyways, I think I can live without Netflix
Hi Everyone -- I have had a OP8 Pro rooted for a long time on L1, and just noticed it got changed to Widevine CDM System ID 8159 and L3 with the latest OTA updated. I am familiar with props config and tried switching to EU firmware all to no avail -- nothing changes.
Since the OP8 Pro are so cheap now, I bought a new one and will just use the MSM tool to flash this back to it's original state, and give it to the wife / sell it etc.
The magic question is this -- OnePlus said this only happened with some devices -- so if I unlock and root the new one is it going to go to L3, or does no-one have any idea?
BTW -- I contacted support and they said I could either send it in now for a flash, or wait for an update that will fix the issue?
No-one seems to know what the root cause is.
Also, I guess a new update is coming out any day for IN2025...? Maybe that will fix it?
Thanks for any info
MW.
I should say that the latest update (11.0.5.5) has changed Widevine to L1. OnePlus fixed it without my intervention!
enjoy_life said:
I should say that the latest update (11.0.5.5) has changed Widevine to L1. OnePlus fixed it without my intervention!
Click to expand...
Click to collapse
I've lost my widevine L1 certification after 11.0.1.1 update. PLEASE HELPPP
enjoy_life said:
I should say that the latest update (11.0.5.5) has changed Widevine to L1. OnePlus fixed it without my intervention!
Click to expand...
Click to collapse
is it still L1 on latest 11.0.7.7? im having issues on 6.6 and 7.7 global. gonna install eu 5.5 now... btw, mine is also IN2020.
also how did you flash it? ota? fastboot?
gsser said:
is it still L1 on latest 11.0.7.7? im having issues on 6.6 and 7.7 global. gonna install eu 5.5 now... btw, mine is also IN2020.
Click to expand...
Click to collapse
Yes, still L1 on 11.0.7.7. Try EU firmware.
gsser said:
also how did you flash it? ota? fastboot?
Click to expand...
Click to collapse
MSM tool
enjoy_life said:
MSM tool
Click to expand...
Click to collapse
can you give a link of the one you used please?
gsser said:
can you give a link of the one you used please?
Click to expand...
Click to collapse
instantnoodlep_15_E.34_210201.zip | by Some_Random_Username for OnePlus 8 Pro
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
This is the latest tool with the firmware 11.0.4.4. After installing just update to 11.0.7.7 via OTA.
enjoy_life said:
instantnoodlep_15_E.34_210201.zip | by Some_Random_Username for OnePlus 8 Pro
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
This is the latest tool with the firmware 11.0.4.4. After installing just update to 11.0.7.7 via OTA.
Click to expand...
Click to collapse
but you said you were on 4.4, didnt have L1. Then updated to 5.5 and it fixed L3? so shouldnt i flash 5.5 over 4.4?
can you say what did you do exactly?
flashed 4.4 eu via fastboot msm, ota update to 5.5 and fix widevine?
gsser said:
can you say what did you do exactly?
flashed 4.4 eu via fastboot msm, ota update to 5.5 and fix widevine?
Click to expand...
Click to collapse
I booted into EDL mode and flashed 11.0.4.4 EU firmware via MSM tool. This essentially overwrites any previous software on your phone.
After flashing, you need to unlock bootloader again via developer settings. And also update to 11.0.7.7 via OTA. Most likely, the DRM-level will be fixed after all these manipulations.
enjoy_life said:
I booted into EDL mode and flashed 11.0.4.4 EU firmware via MSM tool. This essentially overwrites any previous software on your phone.
After flashing, you need to unlock bootloader again via developer settings. And also update to 11.0.7.7 via OTA. Most likely, the DRM-level will be fixed after all these manipulations.
Click to expand...
Click to collapse
okay. started flashing 4.4 now.
enjoy_life said:
I booted into EDL mode and flashed 11.0.4.4 EU firmware via MSM tool. This essentially overwrites any previous software on your phone.
After flashing, you need to unlock bootloader again via developer settings. And also update to 11.0.7.7 via OTA. Most likely, the DRM-level will be fixed after all these manipulations.
Click to expand...
Click to collapse
also did you open bootloader right after 4.4 or update it via ota, and then unlock?
Related
Hi guys. I've a Huawei Nova L01 with CAN-L01C02B331 and CUSTC02D002 firmware. I want to try the lineageos build published by grarak on his twitter account but some weeks ago i risked to brick the phone (i was already on nougat). Anyone know a safe and effective guide for that? Thanks to those who will help me
pasmadferit said:
Hi guys. I've a Huawei Nova L01 with CAN-L01C02B331 and CUSTC02D002 firmware. I want to try the lineageos build published by grarak on his twitter account but some weeks ago i risked to brick the phone (i was already on nougat). Anyone know a safe and effective guide for that? Thanks to those who will help me
Click to expand...
Click to collapse
Don't know what to say, I have Android nougat and tried to flash lineage by Grarak but I'm stuck at patching system image unconditionally....
It gaves me the same problem..
pasmadferit said:
It gaves me the same problem..
Click to expand...
Click to collapse
You can talk with Grarak on Twitter and ask him how to solve this issue and if it's possible to go back on marshmallow from emui5
already done so, zero response
Asked huawei for rollback link
Same problem here, so I emailed huawei for a rollback link. I'm on NRD90M so normally should be able to revert to original MM... No response so far...
Fierens said:
Same problem here, so I emailed huawei for a rollback link. I'm on NRD90M so normally should be able to revert to original MM... No response so far...
Click to expand...
Click to collapse
And how can we go back to mm, is there a tool to do it? I have tried to flash mm but I'm not able because system and cust partition are bigger on stock mm firmwares, so once installed nougat we are not able to go back on mm. Basically they have to release a tool witch will automatically repartition system and cut partitions or release a mm firmware with smaller partitions....Oh sorry they didn't respond, I'm curious about they're response, if they will ever replay to you e-mail.
mArIuS% said:
And how can we go back to mm, is there a tool to do it? I have tried to flash mm but I'm not able because system and cust partition are bigger on stock mm firmwares, so once installed nougat we are not able to go back on mm. Basically they have to release a tool witch will automatically repartition system and cut partitions or release a mm firmware with smaller partitions....Oh sorry they didn't respond, I'm curious about they're response, if they will ever replay to you e-mail.
Click to expand...
Click to collapse
Well, thats whats the NRD90M build is made for, so you would be able to return to MM Its a build that should give the opportunity to have a rollback... However, what I have learned is that you need a specific updatefile to do this... This updatefile, does not exist (?)
Hi everyone
I bought ZTE Axon 7 (A2017G) from Italy Amazon
it is running MM 6.0.1 (Mifavor 4.0 version B11)
there is no OTA updating
so I want to manual update to Nougat last version for my region
then getting TWRP, Magisk, Xposed
but there's alot of guides here with a lot of roms with deference regions confuse me!
so what guide should I use, and what rom should I use
is there need to unlock bootloader , is that will losing me any feature like dolby ?
am2006 said:
Hi everyone
I bought ZTE Axon 7 (A2017G) from Italy Amazon
it is running MM 6.0.1 (Mifavor 4.0 version B11)
there is no OTA updating
so I want to manual update to Nougat last version for my region
then getting TWRP, Magisk, Xposed
but there's alot of guides here with a lot of roms with deference regions confuse me!
so what guide should I use, and what rom should I use
is there need to unlock bootloader , is that will losing me any feature like dolby ?
Click to expand...
Click to collapse
The guide from Controllerboy works perfect ( advice read it more than once ) , the axontoolkit works too.
If you decide to go with custom rom you will loose ZTE Dolby,
but viper works good, but there are debloated stock roms which you can use with Dolby and root.
Unlocking the bootloader is always helpful, if you decide to use custom recovery and root, because if you mess up anything you're mostly lost with a locked bootloader.
Unlocking the bootloader will completely wipe your phone, better you copy your important stuff to PC.
If you just want to update your phone copy the latest official
firmware to the external SD card and use the update function.
coremania said:
The guide from Controllerboy works perfect ( advice read it more than once ) , the axontoolkit works too.
If you decide to go with custom rom you will loose ZTE Dolby,
but viper works good, but there are debloated stock roms which you can use with Dolby and root.
Unlocking the bootloader is always helpful, if you decide to use custom recovery and root, because if you mess up anything you're mostly lost with a locked bootloader.
Unlocking the bootloader will completely wipe your phone, better you copy your important stuff to PC.
If you just want to update your phone copy the latest official
firmware to the external SD card and use the update function.
Click to expand...
Click to collapse
thanx, I red it, but it's said i must be on MM B10 at most, and I am on MM B11, also there is no guide for downgrade, also there is no guide for upgrade , in present, I just want to try stock rom on last Nougat version with twrp, magisk & xposed, so Am I need to unlock bootloader on MM 1st?, or I can upgrade to N then doing all of it?
am2006 said:
thanx, I red it, but it's said i must be on MM B10 at most, and I am on MM B11, also there is no guide for downgrade, also there is no guide for upgrade , in present, I just want to try stock rom on last Nougat version with twrp, magisk & xposed, so Am I need to unlock bootloader on MM 1st?, or I can upgrade to N then doing all of it?
Click to expand...
Click to collapse
This is a bit outdated, you can follow the guide on mm or n, doesn't matter. No need to down or upgrade before.
---------- Post added at 18:55 ---------- Previous post was at 18:49 ----------
After you did the unlock, the twrp update and flashed the Los thread bootloader + modem you can use this rom, guess this is what you want:
https://forum.xda-developers.com/axon-7/development/rom-slim-version-t3669355
coremania said:
This is a bit outdated, you can follow the guide on mm or n, doesn't matter. No need to down or upgrade before.
Click to expand...
Click to collapse
OK, but which last Nougat version for my region?, which rom can I use
am2006 said:
OK, but which last Nougat version for my region?, which rom can I use
Click to expand...
Click to collapse
Linked in last post
@am2006 it seem strange that you don't receive OTA update. It is seem that the seller had done something with the phone (properly install A2017G on A2017 chinese model). Before doing anything, you must know you model, cause A2017G brick is pretty hard to fix
tamahouse02 said:
@am2006 it seem strange that you don't receive OTA update. It is seem that the seller had done something with the phone (properly install A2017G on A2017 chinese model). Before doing anything, you must know you model, cause A2017G brick is pretty hard to fix
Click to expand...
Click to collapse
No I think the last update in Italy is MM, but I'm not sure, the device is new and I check the model and SN on the mobile and its cartoon, it is matching
am2006 said:
No I think the last update in Italy is MM, but I'm not sure, the device is new and I check the model and SN on the mobile and its cartoon, it is matching
Click to expand...
Click to collapse
I recommend using stock Nougat. Stock ROM has pretty good camera, Dolby, DAC which you will missing when using custom ROM. (Stock MM is bit crappy, ZTE has fix a lot after several update).
Beside, RR is very good custom ROM.
Official Xposed does not support Nougat yet, there is an unofficial one but not work with stock Nougat, I haven't try on RR
tamahouse said:
I recommend using stock Nougat. Stock ROM has pretty good camera, Dolby, DAC which you will missing when using custom ROM. (Stock MM is bit crappy, ZTE has fix a lot after several update).
Beside, RR is very good custom ROM.
Official Xposed does not support Nougat yet, there is an unofficial one but not work with stock Nougat, I haven't try on RR
Click to expand...
Click to collapse
thanx, what about LineageOS, is it support Dolby, magisk?
am2006 said:
thanx, what about LineageOS, is it support Dolby, magisk?
Click to expand...
Click to collapse
There are multiple iterations of Dolby made as a Magisk module. Magisk works perfectly on both LineageOS and Stock rom.
Hello guys,
Im using an ZTE Axon 7 with unkocked bootloader, rooted, and using a custom ROM and twrp. I **** to try the original and latest version of the official ROM to see how well the performance are. Is there a package for this that can be installed using TWRP and after it has been installed, my phone is in the original state again?
I saw an update on the ZTE website from 25/07/2018. (Version B35) Is this Android 8?
https://www.zteusa.com/axon-7
Can I install this package by using TWRP aswell?
Flash a zip package in twrp. But flash an twrp image after the rom. The stock rom overwrites the twrp with stock recovery.
Thanks! So, no matter wich bootstock Im using, I can just install the zip from te ZTE website using TWRP and that's it?
EDIT: on the website, there is only A2017U model. No G or A. Does this matter?
powermarcel10 said:
Thanks! So, no matter wich bootstock Im using, I can just install the zip from te ZTE website using TWRP and that's it?
EDIT: on the website, there is only A2017U model. No G or A. Does this matter?
Click to expand...
Click to collapse
It does matter.
Flash this instead so you keep TWRP.
https://forum.xda-developers.com/axon-7/development/rom-slm-dfnr-t3761277
P.S: wrong forum and also answered a million times
bornlivedie said:
It does matter.
Flash this instead so you keep TWRP.
https://forum.xda-developers.com/axon-7/development/rom-slm-dfnr-t3761277
P.S: wrong forum and also answered a million times
Click to expand...
Click to collapse
Thanks.
That is also an option. But I still prefer the latest version from te website as I hope that this is Android 8 and want to really have it at factory stock again.
powermarcel said:
Thanks.
That is also an option. But I still prefer the latest version from te website as I hope that this is Android 8 and want to really have it at factory stock again.
Click to expand...
Click to collapse
The B35 (U-version) is 7.1.1
Try this : https://forum.xda-developers.com/axon-7/development/rom-slm-dfnr-t3744388
It's totaly stock or at least derived from the B35 that you want.
Or make your day and try this 8.0.0 : https://forum.xda-developers.com/axon-7/how-to/official-beta-android-8-0-0-v2-10b12-t3797085
Beta, U version based but definitely worth a try
Or go back to factory with the @djkuz EDL Tool. The B35 is in the OP. https://forum.xda-developers.com/axon-7/development/axon-7-edl-tool-flash-backup-restore-t3750759
https://androidfilehost.com/?fid=962187416754472312
powermarcel said:
Thanks.
That is also an option. But I still prefer the latest version from te website as I hope that this is Android 8 and want to really have it at factory stock again.
Click to expand...
Click to collapse
B35 (from that site) is Nougat, not Oreo.
Oreo was not released officially so you won't find it in the ZTE website.
The current release (B12) is a -buggy- beta and missing some features. It's really not worth it. Battery life is atrocious (probably less than 2hs SoT).
You're better off with B10 (latest for A2017G) or B35 (latest for A2017U).
Those are the latest official firmwares for the phone and both are Nougat 7.1.1. Pay no attention to the numbers, as B10 is identical (update wise) to B35. Flash whatever you like. There's really no other option.
If you prefer the original stock experience with nothing touched or removed/added, you will have to flash a firmware via EDL mode. But that way you lose TWRP unless you replace recovery.img with a compatible TWRP version before flashing with Xiaomi Flash and your device is completely erased.
Forget about Oreo for the moment.
According to recent posts on Chinese Lenovo forums, ZUI development for ZUK Z2, Z2 pro, Edge has stopped.
https://club.lenovo.com.cn/thread-5433851-1-1.html
The Final official version of Chinese ZUI for Z2 Plus is also released - 4.0.199 dated 2 Feb 2019
The QSTP flashable version is available on baidu server, Link in below page
https://club.lenovo.com.cn/thread-4777766-1-1.html
^ Can anyone with a Baidu account download and share the file on Google Drive or somewhere else?
Where to find the download link ?
Debu_013 said:
...
The Final official version of Chinese ZUI for Z2 Plus is also released - 4.0.199 dated 2 Feb 2019...
Click to expand...
Click to collapse
What then for the release in this thread?
[ROM][8.0.0][ZUI 4.0.199] Zuk Z2 [Gapps Preinstalled][GCam Working]
Debu_013 said:
According to recent posts on Chinese Lenovo forums, ZUI development for ZUK Z2, Z2 pro, Edge has stopped.
https://club.lenovo.com.cn/thread-5433851-1-1.html
The Final official version of Chinese ZUI for Z2 Plus is also released - 4.0.199 dated 2 Feb 2019
The QSTP flashable version is available on baidu server, Link in below page
https://club.lenovo.com.cn/thread-4777766-1-1.html
^ Can anyone with a Baidu account download and share the file on Google Drive or somewhere else?
Click to expand...
Click to collapse
I downloaded the rom, and it's not for qfil. The highest ZUI version for qfil is still 3.5.389
pipyakas said:
I downloaded the rom, and it's not for qfil. The highest ZUI version for qfil is still 3.5.389
Click to expand...
Click to collapse
Could that be some kind of OTA update (the ones to rename update.zip and flash on top of version 3.5.389)?
Nordicus said:
What then for the release in this thread?
[ROM][8.0.0][ZUI 4.0.199] Zuk Z2 [Gapps Preinstalled][GCam Working]
Click to expand...
Click to collapse
ZUI 4.0.199 BETA for Z2 has been in circulation since Oct-Nov 2018. Most of the available modified ROMs are based on these beta builds.
According to the lenovo forum post the FINAL version of ZUI 4.0.199 was released after optimizations on 2nd Feb 2019.
pipyakas said:
I downloaded the rom, and it's not for qfil. The highest ZUI version for qfil is still 3.5.389
Click to expand...
Click to collapse
The post says this version is QPST compatible.
Even on 4pda ZUI 4.0.186 QPST flashable version exists.
I thought QPST and QFIL were basically same, are they different?
If you have it downloaded, could you please share it on GDrive or any other way?
pipyakas said:
I downloaded the rom, and it's not for qfil. The highest ZUI version for qfil is still 3.5.389
Click to expand...
Click to collapse
Debu_013 said:
The post says this version is QPST compatible.
Even on 4pda ZUI 4.0.186 QPST flashable version exists.
I thought QPST and QFIL were basically same, are they different?
If you have it downloaded, could you please share it on GDrive or any other way?
Click to expand...
Click to collapse
A QPST rom is for using with QFIL
I never used ZUI and do any OTA updates on it, but I downloaded the rom, open the zip file and inside is the normal structure for a regular rom (META-INF, boot.img, system.img files)
I didn't know that there's a QPST version of ZUI 4.0.186 for use with QFIL (downloading rn to check out)
As for the ZUI 4.0.199, sorry I deleted it after finding out it's not qpst version
Edit: the ZUI 4.0.186 qpst I found is an older version patched up with the newest boot.img and system.img files from the newer ota release
The newest official ZUI QPST version I can find is 3.5.386, and it's from an official lenovo cdn server
http://cdn.zui.lenovomm.com/downloa...SER_Q00030.1_O_ZUI_3.5.389_ST_180525_qpst.zip
pipyakas said:
A QPST rom is for using with QFIL
Edit: the ZUI 4.0.186 qpst I found is an older version patched up with the newest boot.img and system.img files from the newer ota release
The newest official ZUI QPST version I can find is 3.5.386, and it's from an official lenovo cdn server
Click to expand...
Click to collapse
Hey thanks. So I guess OTA can be used to upgrade to the latest 4.0.199 after flashing the 3.5.386 QPST version.
I am currently on the ZUI 2.5 (Nougat) Indian version, and as far as I understand, to make Oreo and Pie Custom ROMs work properly on my phone I need to upgrade to the latest ZUI to enable the treble support due to the new bootloader and other partitions. Please correct me if I am wrong.
pipyakas said:
A QPST rom is for using with QFIL
I never used ZUI and do any OTA updates on it, but I downloaded the rom, open the zip file and inside is the normal structure for a regular rom (META-INF, boot.img, system.img files)
I didn't know that there's a QPST version of ZUI 4.0.186 for use with QFIL (downloading rn to check out)
As for the ZUI 4.0.199, sorry I deleted it after finding out it's not qpst version
Edit: the ZUI 4.0.186 qpst I found is an older version patched up with the newest boot.img and system.img files from the newer ota release
The newest official ZUI QPST version I can find is 3.5.386, and it's from an official lenovo cdn server
http://cdn.zui.lenovomm.com/downloa...SER_Q00030.1_O_ZUI_3.5.389_ST_180525_qpst.zip
Click to expand...
Click to collapse
Could you still please reupload the new file posted in the OP on a different server? Thank you!
Debu_013 said:
Hey thanks. So I guess OTA can be used to upgrade to the latest 4.0.199 after flashing the 3.5.386 QPST version.
I am currently on the ZUI 2.5 (Nougat) Indian version, and as far as I understand, to make Oreo and Pie Custom ROMs work properly on my phone I need to upgrade to the latest ZUI to enable the treble support due to the new bootloader and other partitions. Please correct me if I am wrong.
Click to expand...
Click to collapse
That's true, although I did face a strange problem that /vendor didnt mount when I first flash the new TWRP (the newest one that support /factory) but now everything's fine.
VMat21 said:
Could you still please reupload the new file posted in the OP on a different server? Thank you!
Click to expand...
Click to collapse
you can follow the guide with this chrome extension to download the file
https://github.com/Kyle-Kyle/baidudl/
pipyakas said:
That's true, although I did face a strange problem that /vendor didnt mount when I first flash the new TWRP (the newest one that support /factory) but now everything's fine.
Click to expand...
Click to collapse
How did you overcome this problem with new twrp?
bhushan2k said:
How did you overcome this problem with new twrp?
Click to expand...
Click to collapse
None of the vendor2factory zip files worked for me, so I ended up flashing ZUI via qfil. Even then, there could still be issues, so definitely ymmv on this one
you can follow the guide with this chrome extension to download the file
https://github.com/Kyle-Kyle/baidudl/
Click to expand...
Click to collapse
Could you share the baidu link?
pipyakas said:
None of the vendor2factory zip files worked for me, so I ended up flashing ZUI via qfil. Even then, there could still be issues, so definitely ymmv on this one
Click to expand...
Click to collapse
Sorry what is ymmv?
Also I have read in other parts of the forum that Chinese ZUI OTA updates don't show up, if you do not use a Chinese VPN and/or setting the location to China. Is that true?
Debu_013 said:
Sorry what is ymmv?
Also I have read in other parts of the forum that Chinese ZUI OTA updates don't show up, if you do not use a Chinese VPN and/or setting the location to China. Is that true?
Click to expand...
Click to collapse
YMMV = Your Mileage May Vary
No it's not, Im not in China and after flashing 3.5.386 via qfil I still got a notification about 4.0.199 ota update, even though I unlocked the bootloader which is kinda weird
pipyakas said:
YMMV = Your Mileage May Vary
No it's not, Im not in China and after flashing 3.5.386 via qfil I still got a notification about 4.0.199 ota update, even though I unlocked the bootloader which is kinda weird
Click to expand...
Click to collapse
Official zui OTA updates won't be successful on unlocked bl, everything needs to be stock.
Hello.
Hope you can help because I'm kinda confused atm
My device is redmi note 7 lavender, came stock with EEA (european global) rom.
I recently unlocked the bootloader, installed twrp, tried a few roms (xiaomi.eu, crdroid, phh-treble gsi, etc). Currently using crdroid without issues.
Previous to all this I was using stock EEA 10.3.2.0 firmware and then sideloaded ota for 10.3.3.0.
According to this post this phone has ARB
What I'm wondering is if I were to go back to stock firmware, would I brick my device? Because the only available fastboot version for EEA is 10.3.2.0 which is older I guess, but I'm not sure exactly how ARB works and it that would trigger it.
Thanks in advance
I recommend that you do not return to the previous version, sometimes the ota bring changes in the bootloader, and you can leave it hardbrick as it happened with several Motorola, even with devices that have a Qualcom processor. Expect that someone else has done it or that the software is released to an equal version.
start to investigate the changes that were added
I leave this link you fence to interest move from the EEA to the global version
https://forum.xda-developers.com/redmi-note-7/how-to/stable-rom-eea-to-global-stable-t3937896
ianxblog said:
Hello.
Hope you can help because I'm kinda confused atm
My device is redmi note 7 lavender, came stock with EEA (european global) rom.
I recently unlocked the bootloader, installed twrp, tried a few roms (xiaomi.eu, crdroid, phh-treble gsi, etc). Currently using crdroid without issues.
Previous to all this I was using stock EEA 10.3.2.0 firmware and then sideloaded ota for 10.3.3.0.
According to this post this phone has ARB
What I'm wondering is if I were to go back to stock firmware, would I brick my device? Because the only available fastboot version for EEA is 10.3.2.0 which is older I guess, but I'm not sure exactly how ARB works and it that would trigger it.
Thanks in advance
Click to expand...
Click to collapse
If you're asking specifically about turning back from 10.3.3 to 10.3.2, then there is no problem (I went from 10.3.3 to 10.3.2 to 10.3.3 again and everything is ok).
thunderteaser said:
If you're asking specifically about turning back from 10.3.3 to 10.3.2, then there is no problem (I went from 10.3.3 to 10.3.2 to 10.3.3 again and everything is ok).
Click to expand...
Click to collapse
My RN7 is global, came with 10.2.3.0 as stock, I updated via OTA to 10.3.5.0, and I was wondering if I try rolling back to 10.2.7.0 (As I didn't find any rom of 10.2.3.0 for global PFGMIXM) it will trigger the ARB? thanks in advance (both have lvl 4 in adb query)
Don't. Just bricked my phone.
fox_xda2 said:
Don't. Just bricked my phone.
Click to expand...
Click to collapse
Sorry to bother but, did you bricked going from which-to-rom, using TWRP or the mi-flashtool?
BlackGarnett said:
Sorry to bother but, did you bricked going from which-to-rom, using TWRP or the mi-flashtool?
Click to expand...
Click to collapse
Rolling back firmware only through twrp, trying to get previous drivers for international version which bug less on proximity sensor.
As the phone is unlocked I might have found a way to restore from brick without physically opening the phone. Will keep you updated.
Edit/Update: yipeee!!
Need to completely flash the phone based on the procedure detailed here. And reflash whatever custom ROM afterwards as you get back to stock.
Just rolled back from Global 10.3.5.0 to 10.2.7.0 with MI Flash Tool (fastboot rom type). 0 problems, seems you can rollback from your MIUI 10 ROMS of the same version(EEA with EEA, Global with Global, etc, and of course that these roms have same ARB 4), at least worked for me, posting this future records.
Actually firmware tool (as opposed to twrp) is the way I reset ARB.