Related
Hi,
Can anyone please tell me why my Omnia II (i8000) is not detected by ActiveSync or Windows Mobile Device Center? I'm tired of trying and very close to giving up hope.
Can you please help me with the issue?
First try on another computer. Then you know more and you can search this site.
I tried with 5 computers. Do I need more?
well i have the opposite case ... everytime a connect mine it detects a new phone .....
In win xp just a one time installation of activesync 4.5 then reboots afterwards then install pc studio that came with a cd or download the latest one.
i had this kind of problem with WMDC running in win 7 ultimate.
what i did was
1. install the pc studio sw (use compatibility mode as win vista sp1) then reboot
2. when u plug the O2 it will try to find the driver but will fail to install.
3. uninstall WMDC thru add/remove programs
4. when u go to dev mgr u will see I8000 with "Question Mark" meaning driver doesnt install properly( pretty much obvious..)
4. try to update the driver manually it says to search driver thru internet select that option if u miss it.. ur next option is to run windows update
5. win update will try to find the latest patch and driver update for ur system. (ur phone shuld be connected to pc at this moment) so that it will find the hardware update available for your pc.
6. go to "hardware option" on the windows update, if u see the "MIT USB Sync" thats the driver for your omnia 2, select that and install it right away..once finish reboot while phone are still connected.
7. if it doesnt find the hardware update on first run..reboot and try it again..( it took me several hrs before it finds the mit usb sync.. patience it s must here)
8. WMDC will run on startup automatically.
hope this will help..
and the bad part is Samsung did not make any driver/software for Windows 7
My i8000 works without a hitch on my Win7 system (x64 and x86). Check if your device's USB option is set to ActiveSyn or USB Mass Storage.
ishtangli said:
My i8000 works without a hitch on my Win7 system (x64 and x86). Check if your device's USB option is set to ActiveSyn or USB Mass Storage.
Click to expand...
Click to collapse
the same here, works without any issues on x86/x64.
help with omnai 2 i8000
hi friends..
i bought an omnia 2 i8000 8gb 2 weeks back..i bought it from india..
i want to know weather i can upgrade my winmo 6.1 professional to winmo 6.5..
the shop told free upgrade is possible..but not available in india till now..
so i want to know is there a way to upgrade it from internet..
pda--I8000DDII3
CSC--I8000NUII3
these are the details in version..can anyone get me a solution..
i read from internet that i could go to samsung site of a country and upgrade it from that site if my phone was manufactured in that country..im not sure if thats right..
pls tell me from which place my phone was made..
and also is it possible for me to upgrade to winmo 6.5 from samsung site...
PHONE--I8000XXII4
Just to share ... Spent abt 6hrs figuring out why my omnia 2 would always hang when i needed to set it up for partnership in order to sync in WMDC (OS = Win7). Been searching wif different keywords in google and realised my problem is not common which convinces me that there is something funky with my set up that is preventing the sync.
Got lucky today ... did a wild google on "omnia 2 wmdc driver" ... and on 1 of the threads, discovered that it is important that the Windows in-built Windows Media Player had to be "installed", which i didnt do since i'd been using other media players. And voila ... issue resolved.
MS sucks! Especially when you get humiliated by such problems that seems so easily fixed. =D
enjoycool said:
I tried with 5 computers. Do I need more?
Click to expand...
Click to collapse
Try a 6th PC for good luck
okay so i cant find a solution to this one, if you can help me, id really apreciate it.
okay so im trying to connect my hd2 to my windows 7 laptop. whenever i connect the two. nothing happens except my phone starts charging!
I tried it on 4 computers, all didn't work
i did the "turn off faster sync thing, that didn't work
ii JUST got this usb cord, so its not broken or anything
i also hard reseted my phone a while back if that helps
thanks in advance
What OS are you running on your HD2?
Windows Mobile 6.5 requires Active Sync to be installed on your machine and should prompt you to do so the first time you connect via USB.
Android should be effortless by just selecting the USB connectivity from the drop down alert menu.
WP7 requires that you have installed the latest version of Windows Mobile Device Center, which can be found by online search. You must download the appropriate x86 or x64 version, as is appropriate to your version of Win7.
Is there a scenario that I've missed?
Thank you for posting!!
my phone runs on windows 6.5.
do i download activesync to my phone or computer? i tried doing it on my computer but it gives me an error :
" This Program is blocked due to compatibility issues"
"previous versions of Active sync cannot be installed on windows vista or later."
i was trying to download Activesync 4.5
PaigeLovesU said:
Thank you for posting!!
my phone runs on windows 6.5.
do i download activesync to my phone or computer? i tried doing it on my computer but it gives me an error :
" This Program is blocked due to compatibility issues"
"previous versions of Active sync cannot be installed on windows vista or later."
i was trying to download Activesync 4.5
Click to expand...
Click to collapse
You are Windows 7 so require WMDC 6.1
are you 32 bit or 64 bit W7 ? they require different WMDC 6.1 installs ...
Download: WMDC6.1 32bit
Download: WMDC6.1 64bit
hello!
i have a 64 bit
link above, good luck
Hey,
My LG E900 is the OS version: 7.10.8107.79. And I want to unlock it take to install applications and games XAP. I used the method by MFG, I put XAP in a Tom XAP Installer to install, and gives me this error when installing:
-Please Make sure your phone was unlocked !
-Please Make sure you connected device to PC and Zune launched
Try again?
What happening? This method does not it? You can get the original ROM and remain the ChevronWP7 up to this latest version? I have another way?
Thanks in advance and sorry my english!
On my cell, the Tom xap says the same, but the app is found in the app list. Check your app list
On my phone it does not happen!
I can put original Rom, install ChevronWP7 and remain to Last Version (7.10.7740/7.10.8107, or other)?
If you're sure your phone is developer unlocked, you might want to try the Microsoft Application Deployment program. You can download it on Microsoft's site. It's a part of Windows Phone Developer Tools.
I have same problem here. I have installed Microsoft Application Deployment ,and same problem at tom XAP installer.
Whats problem?
Sorry for by bad english,i am from poland and 15years old ^^
I have an optimus 7(MFG unlocked) too and I have no problems with installing xaps! In fact I installed the whole Windows Phone SDK to get the application deployment....
But I I´m using it with admin rights, maybe that´s the problem for some users?
But VERY IMPORTANT is that you unlock the Lockscreen and start zune before opening toms xap installer or application deployment! If you dont do that, no xap installation method will work.
You have to:
- unlock your device (developer unlock is minimum)
- install Windows Phone SDK
- download eg Windows Phone Power Tools wptools.codeplex.com
- connect device to pc
- start zune
- start Windows Phone Power Tools
- unlock screen (go to your live tiles screen)
- check if in connection drop down list "Windows Phone Device" is selected
- click Connect
and that's all
Lg e900 installing xap failure
Good morning guys I recently acuired Lg Optimous e900,I have installed Zune witch doesn't
Detect my device alltough my windows 7 on my I computer had installed drivers etc.
Unlocked my device via mfg,then I installed Windows Phone SDK,run the windows phone emulator,had my
phone's screen unlocked & run Zune,after these I run Tom xap installer with administrator preveleges
Entered a xap file and then I pressed install and all I got was an error with a code & a message that said that
I haven't unlocked my phone or I don't run zune.
Please help me I've wasted many hours with no result
1. "Unlock" phone through MFG
2. Install latest MS Windows Phone SDK
3. Install latest ZUNE
4. Connect phone with PC, ZUNE rise up automatically, wait for ZUNE to fully recognise phone,
5. In phone stiings set Lock Screen to Never and back to Start screen,
6. Run Application Deployment from MS folder previosly installed, as Target set Windos 7 Phone Device and for XAP click Browse to navigate to your wished .xap, click Deploy and wait to do job.
7. Voila, thats it and should work except something wrong with drivers or with WIN on PC.
Work extra fine on my E900 with WP 7.8 latest Update .
P.S. After all, put back Lock Screen to desired state.
Dude,thanks for your rely,the first thing I must make happen is to make my pc detect my
phone in zune in driver manager my phone is desplayed as "LGE Mobile Composite USB Device"
I updated my chipset drivers no luck so far,and tried different usb ports.Anywayz my last hope is to
try today on a lap top that has windows xp :/
Eurika!!!
I FOUND IT!!! the problem solved I had to
I had to open MFG
enter the password 277634#*#
Port setting--> Usb Swithing and I think I put MS Comosite option
then restart,then zune detected my phone
:fingers-crossed:
Help
Hi
My Optimus 7 has been unlocked via the provider Orange and no would like to install Nokia drive.
Do I just add the XAP to the phone or what should I do?
How can I check the phone is unlocked as I have not used MFG or Chevron and how to install drive as I have downloaded the unlocked version.
Thanks
Joonoflight
Hello!
I'd really like to use SideSync 3 from Samsung with my Note 4, because I work on my computer alot and it would be very handy to operate my phone via comp.
I had it set up on my ex personal PC via USB, but I can't get it to work on my ASUS laptop.
Problem: I install SideSync 3 from http://www.samsung.com/us/sidesync/ and after I start the program nothing happens. It's like it freezes on opening and doesn't start. I was looking in the running processes but can't find any clue that is actualy running nor anything. I tried running as admin, tried system compatibility with win 8, 7, xp, dpi changes, admin rights... nothing works.
Any idea?
I'd be really happy if someone helped me out! =)
Sorry this won't help much. But it's working fine on WiFi. 8.1 Windows. Check you have latest version from Samsung on your note
try turning on USB debugging from developer options menu
raveenf said:
try turning on USB debugging from developer options menu
Click to expand...
Click to collapse
tried usb debugging, nothing help because app doesn't start on windows. It's like it hangs..
i tried it on another laptop - lenovo.. same problem...
again:
1. i install sidesync 3.0 from samsung webpage
2. i start it
3. nothing happens
4. i try to run as admin
5. nothing
6. restart
7. notthign
8. run the program
9. nothng
i'm loosing my mind really =(
Anyone with any idea??
As I said... I'm loosing my mind =(
Same problem here on Asus laptop with Windows 8.1
Same problem here.
Any ideas?
hi ,
i noticed that you are trying to get SideSync 3 it to work on Win 8.1 (PC /USB .)
However ,i have Acer laptop Win 8 ( have not updated laptop to Win 8.1 ) SideSync 3 works fine. (No freezes or nothing, smooth, no problems at all )
Note 4 / USB connected .
Maybe you can " read " something into why it works on Win 8, since you " tried system compatibility with win 8" ?
Good luck
I have same problem. I tried on 3 different computers (Win 10, Win 8.1 and Win 7). To my suprise I can't run this app on any computer. It just will not start - at least it seams so. I also tried different compability modes and run it as administrator, but no success (it's same experience as miHah).
This is not a problem of phone (I use S6 Edge) - the phone is recognized when connected by USB (and I can browse/edit content on phone from pc). It just wont work with SideSync. BTW: I tried with SideSync version 3 and 4. Same results - doesnt run.
I have similar problem. I am unable to install samsung sidesync because it freezes my Windows 10 pc while installing samsung usb drivers for mobile devices. I am also unable to uninstall samsung usb drivers. Everytime I forced to reset my pc. Any ideas?
I have same issues and very confused
Admin rights requested on startup
At any time when I reboot, as Sidesync is started during boot sequence, when I login in, the Admin rights autorisation opened as I am not admin by default.
Any clue or advice for this ?
Thanks
jp
Same here
Do you guys also have keis 3 installed? I was able to start sidesync. I hadn't had any devices linked yet but I installed keis 3 and now it is doing the same (not even starting). I noticed when I downloaded sidesync from the Samsung website, it notified me I needed to update keis 3 and uninstalled it when I accepted the update. I wonder if it has something to do with both programs being installed or if you also need sidesync source on the computer as well. BTW I'm running acer win 7.
Hi, is it possible connect WIN CE with WIN 10(1909)?
I use Riftek PDA(Railway Wheel Profile Gauge IKP,IMR, IDK) with WIN CE 6.x...but problem is with connection via WMDC. PC just ignoring connection. I try WIN 7 in VB, but no lucky too. Please, can somebody help me with this? I need connection with PC for download and back up data from measuring.
https://riftek.com/eng/products/~show/instruments/railway-devices/railway-wheel-profile-gauge-ikp
erik.aragorn said:
Hi, is it possible connect WIN CE with WIN 10(1909)?
I use Riftek PDA(Railway Wheel Profile Gauge IKP,IMR, IDK) with WIN CE 6.x...but problem is with connection via WMDC. PC just ignoring connection. I try WIN 7 in VB, but no lucky too. Please, can somebody help me with this? I need connection with PC for download and back up data from measuring.
https://riftek.com/eng/products/~show/instruments/railway-devices/railway-wheel-profile-gauge-ikp
Click to expand...
Click to collapse
Don't use a usb 3.0 port, try a 2.0.
Did you try to run WinMo device manager in compatibility mode for Win7?
Mik-el said:
Don't use a usb 3.0 port, try a 2.0.
Did you try to run WinMo device manager in compatibility mode for Win7?
Click to expand...
Click to collapse
Problem is still continue. I try USB 2.0.
In windows 10 it was once connect with HTC Touch 2, what I try. But Riftek PDA still nothing. And HTC have too problem, after PC restart.
Win 7 in VirtualBox have problem too, with WIndows Mobile and CE connect. It wrote me error with USB sync driver, code 10. But driver install was from MS Update.
erik.aragorn said:
Problem is still continue. I try USB 2.0.
In windows 10 it was once connect with HTC Touch 2, what I try. But Riftek PDA still nothing. And HTC have too problem, after PC restart.
Win 7 in VirtualBox have problem too, with WIndows Mobile and CE connect. It wrote me error with USB sync driver, code 10. But driver install was from MS Update.
Click to expand...
Click to collapse
I've never had problems connecting my WinMo device to my computers.
Before WinMo device manager there was Active Sync, if I'm not wrong it works on Win XP only.
I don't use virtual machine very often, if I insert a usb pendrive to my pc I can't see it on my virtual machine obliviously, you need to change settings for the virtual machine and so on. In the worst case I suggest you to install a lite version of Win7 alongside the main Windows installation on your computer
Mik-el said:
I've never had problems connecting my WinMo device to my computers.
Before WinMo device manager there was Active Sync, if I'm not wrong it works on Win XP only.
I don't use virtual machine very often, if I insert a usb pendrive to my pc I can't see it on my virtual machine obliviously, you need to change settings for the virtual machine and so on. In the worst case I suggest you to install a lite version of Win7 alongside the main Windows installation on your computer
Click to expand...
Click to collapse
Yes I have not problem too, but last 2 update make big problems with WMDC under Windows 10. Only solution what I see is, found old NB and run Windows 7/8 on it.
Or is it possible run Win CE 6.x app from this PDA on WIndows Mobile device with WIndows 6..1/6.5? I try it, but i got error. But I think it with little editing it is possible run it. But how?
https://riftek.com/eng/support ->Railway Wheel Profile Gauge -> IKP-5 Software for PDA (from 2016) (2MB)