okay so i cant find a solution to this one, if you can help me, id really apreciate it.
okay so im trying to connect my hd2 to my windows 7 laptop. whenever i connect the two. nothing happens except my phone starts charging!
I tried it on 4 computers, all didn't work
i did the "turn off faster sync thing, that didn't work
ii JUST got this usb cord, so its not broken or anything
i also hard reseted my phone a while back if that helps
thanks in advance
What OS are you running on your HD2?
Windows Mobile 6.5 requires Active Sync to be installed on your machine and should prompt you to do so the first time you connect via USB.
Android should be effortless by just selecting the USB connectivity from the drop down alert menu.
WP7 requires that you have installed the latest version of Windows Mobile Device Center, which can be found by online search. You must download the appropriate x86 or x64 version, as is appropriate to your version of Win7.
Is there a scenario that I've missed?
Thank you for posting!!
my phone runs on windows 6.5.
do i download activesync to my phone or computer? i tried doing it on my computer but it gives me an error :
" This Program is blocked due to compatibility issues"
"previous versions of Active sync cannot be installed on windows vista or later."
i was trying to download Activesync 4.5
PaigeLovesU said:
Thank you for posting!!
my phone runs on windows 6.5.
do i download activesync to my phone or computer? i tried doing it on my computer but it gives me an error :
" This Program is blocked due to compatibility issues"
"previous versions of Active sync cannot be installed on windows vista or later."
i was trying to download Activesync 4.5
Click to expand...
Click to collapse
You are Windows 7 so require WMDC 6.1
are you 32 bit or 64 bit W7 ? they require different WMDC 6.1 installs ...
Download: WMDC6.1 32bit
Download: WMDC6.1 64bit
hello!
i have a 64 bit
link above, good luck
Related
First post so be gentle
I've searched past posts and found similar questions but not many answers
I was happy using my mda vario 2 via usb to my mce laptop
I purchased vista ultimate on release date and since then haven't been able to connect via usb.
I'm currently using it via bluetooth but would prefer my usb back
Has t-mobile released an updated usb driver for vista yet ?
I take it that you have downloaded the Active Sync for Vista 4.5
Once you have this downloaded, when you first connect your device it will install all the new drivers and carry out the process of setting up the syc data.
I hope that this will help you in some way
D
P.S. Search Microsoft.com for active sync for vista
djstegges said:
I take it that you have downloaded the Active Sync for Vista 4.5
Once you have this downloaded, when you first connect your device it will install all the new drivers and carry out the process of setting up the syc data.
I hope that this will help you in some way
D
P.S. Search Microsoft.com for active sync for vista
Click to expand...
Click to collapse
Vista uses WMDC, not activesync.......
You don't need Active Sync 4.5 in Vista, you need Windows Mobile Device Center, its already available thru Windows Update or website
will WMDC allow you to run RUU programs from this forum, or do I still need to figure out the whole usbser.sys thing? I'm pretty savvy, but I'm still a bit confused on this point.
i have the Windows Mobile Device Center software.
I'm wanting to use the mda as a modem on my laptop so i need a usb driver.
The usb driver included on the install disc is for xp only and isnt compatible with vista.
Is that correct or have people have got it working ?
thanks in advance for any help
I can't even get my device to be reconnized by Vista anymore. WMDC doesnt detect it at all...
To install the modem drivers for vista, edit the usbmdm file like so adding
"include=mdmcpq.inf" in these three sections.
[Modem1.NT]
DriverVer=05/13/1999
include=mdmcpq.inf
CopyFiles=FakeModemCopyFileSection
AddReg = All, MfgAddReg, Modem1.AddReg, Voice, EXTERNAL, MDMGL007.V90_Voice,MDMGL004.ExtraCID,MDMGL001.TerseResp
[Modem1.NT.Services]
include=mdmcpq.inf
AddService=usbser, 0x00000000, LowerFilter_Service_Inst
[Modem1.NT.HW]
include=mdmcpq.inf
AddReg=LowerFilterAddReg
For the RUUs, you have to replace the WMDC drivers with the old ActiveSync ones; there's a thread on that somewhere. As for the USB modem, I would recommend switching to a WM6 ROM - it no longer uses the weird modem drivers, it just appears as a network device automatically, at least in XP, but I would assume Vista has that driver built in because XP does.
Hi, i had problems syncronizing my phone and laptop. When i plugged in the laptop failed to install drivers and recognize the phone as "Generic RNDIS". I solved it by unticking "advanced functions" on my phone. Now i can sync it with windows mobile center. Unluckily when i try to use internet sharing it gives me the same problem. The laptop doesn't install the correct drivers (remote NDIS based internet sharing device) and recognize the phone as Generic RNDIS. I already installed windows mobile device center 6.1 and every kind of drivers.
Any help?
Thank you.
Active scync
Hey bro u need to install active scyn on ur laptop hear is the link download & install
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-download.mspx
thanks for answering. Active Sync works only with windows XP or earlier. I have windows 7 and i have windows mobile center. By the way, i can't connect to internet.
Any other idea?
It might have been a failed driver install... Go to device manager and un-install the driver but make sure the "DELETE DRIVER" box is UNCHECKED. Once it is uninstalled, reboot PC and plug the phone back in. Happened to me once and this fixed it.
My EU HD2 is running MAGLDR 1.13 which I installed from my Windows 7 PC, but I threw it away because it was too slow. I installed Windows for Parallels on my MacBook running Lion. I put my HD2 in USB Flasher mode, and it says "wait USB" but it doesn't say "USB" after that. On my computer it says "the device driver was not successfully installed". I tried installing the Google USB driver but it didn't install properly. I also tried following this thread, but I didn't understand it much. Can someone help me out? Thanks.
Problem Solved
Dear All,
I was facing the same Issue. And I know this thread is very old and Issue may be resolved. Just in case somebody like me searching for resolution can do the following :
1. for XP => Install Active Sync
2. for Win Vista / Win 7 => Install Windows Mobile Device Center
me_malik said:
Dear All,
I was facing the same Issue. And I know this thread is very old and Issue may be resolved. Just in case somebody like me searching for resolution can do the following :
1. for XP => Install Active Sync
2. for Win Vista / Win 7 => Install Windows Mobile Device Center
Click to expand...
Click to collapse
@me_malik: Are you sure this way it will help?
As far as I remember, Active sync/WMDC is for devices running on windows mobile up to version 6.5.5 and are discontinued afterward. The USB drivers installed for MAGDLR or CLK are different and can be found in the AndroidSDK folders.
I am responding because I am also facing the same issue and WMDC is already installed on my computer for the other HTC phone still running on Windows Mobile 6.5.5.
Thanks for the response though.
Hey There!
Hope i'm i the right section to post my problem.
I got a HTC HD2 and flashed Windows Phone 7 on it -> This Rom: http://forum.xda-developers.com/showthread.php?t=1356833
I installed Zune and wanted to connect my device to sync it, but it isnt recognized.. All drivers are installed (Windows Phone Usb, HTC HD2 and so on.) Theres no Error in Device Manager.
When i connect my Device to the USB-Port, Zune starts but it doesnt recognize my HD2. I tried it 1000 times.. installed WMDC, reinstalled Zune, added local service, installed the drivers while beeing in bootloader-menu and so on.
Is there a chance to get my HD2 connected with Zune? I'm using Windows 7 Pro 64bit. But even on WinXp the same probs. Tried 3 cables also)
Thanks in advance,
Andreas
//pls help ;\
x64 windows sometimes make problems... try uninstall Windows Mobile Device Center and install it again but if this not help only way is to use x86 windows...
Hi, is it possible connect WIN CE with WIN 10(1909)?
I use Riftek PDA(Railway Wheel Profile Gauge IKP,IMR, IDK) with WIN CE 6.x...but problem is with connection via WMDC. PC just ignoring connection. I try WIN 7 in VB, but no lucky too. Please, can somebody help me with this? I need connection with PC for download and back up data from measuring.
https://riftek.com/eng/products/~show/instruments/railway-devices/railway-wheel-profile-gauge-ikp
erik.aragorn said:
Hi, is it possible connect WIN CE with WIN 10(1909)?
I use Riftek PDA(Railway Wheel Profile Gauge IKP,IMR, IDK) with WIN CE 6.x...but problem is with connection via WMDC. PC just ignoring connection. I try WIN 7 in VB, but no lucky too. Please, can somebody help me with this? I need connection with PC for download and back up data from measuring.
https://riftek.com/eng/products/~show/instruments/railway-devices/railway-wheel-profile-gauge-ikp
Click to expand...
Click to collapse
Don't use a usb 3.0 port, try a 2.0.
Did you try to run WinMo device manager in compatibility mode for Win7?
Mik-el said:
Don't use a usb 3.0 port, try a 2.0.
Did you try to run WinMo device manager in compatibility mode for Win7?
Click to expand...
Click to collapse
Problem is still continue. I try USB 2.0.
In windows 10 it was once connect with HTC Touch 2, what I try. But Riftek PDA still nothing. And HTC have too problem, after PC restart.
Win 7 in VirtualBox have problem too, with WIndows Mobile and CE connect. It wrote me error with USB sync driver, code 10. But driver install was from MS Update.
erik.aragorn said:
Problem is still continue. I try USB 2.0.
In windows 10 it was once connect with HTC Touch 2, what I try. But Riftek PDA still nothing. And HTC have too problem, after PC restart.
Win 7 in VirtualBox have problem too, with WIndows Mobile and CE connect. It wrote me error with USB sync driver, code 10. But driver install was from MS Update.
Click to expand...
Click to collapse
I've never had problems connecting my WinMo device to my computers.
Before WinMo device manager there was Active Sync, if I'm not wrong it works on Win XP only.
I don't use virtual machine very often, if I insert a usb pendrive to my pc I can't see it on my virtual machine obliviously, you need to change settings for the virtual machine and so on. In the worst case I suggest you to install a lite version of Win7 alongside the main Windows installation on your computer
Mik-el said:
I've never had problems connecting my WinMo device to my computers.
Before WinMo device manager there was Active Sync, if I'm not wrong it works on Win XP only.
I don't use virtual machine very often, if I insert a usb pendrive to my pc I can't see it on my virtual machine obliviously, you need to change settings for the virtual machine and so on. In the worst case I suggest you to install a lite version of Win7 alongside the main Windows installation on your computer
Click to expand...
Click to collapse
Yes I have not problem too, but last 2 update make big problems with WMDC under Windows 10. Only solution what I see is, found old NB and run Windows 7/8 on it.
Or is it possible run Win CE 6.x app from this PDA on WIndows Mobile device with WIndows 6..1/6.5? I try it, but i got error. But I think it with little editing it is possible run it. But how?
https://riftek.com/eng/support ->Railway Wheel Profile Gauge -> IKP-5 Software for PDA (from 2016) (2MB)