Related
Hi guys
I'm hoping to get some help from you with deciding head unit for my Ford S-Max. I'm doing a research about it but still a bit confused.
I have few units I'm looking at,
1. Ford specific Joying - JY-FL124N2 ( Android 5.1.1 Lollipop 2GB RAM Intel SoFIA 3GR , 4 Cores )
2. Universal Joying - JY-UL135N2 ( Android 5.1.1 Lollipop 2GB RAM Intel SoFIA 3GR , 4 Cores )
3. Ford specyfic Xtrons - PF75QSFAP-S ( Android 5.1 Lollipop 64 Bit Operating System Quad Core )
4. Ford specyfic Xtrons - PCD76QSFA-S ( Android 6.0 Marshmallow quad core Cortex A7 )
5. Ford specyfic Xtrons - PF70FSFS-S ( 800MHZ Cortex A7 Processor and latest WinCE6.0 )
I'm really into buying ford specific Joying with SoFIA, i was reading about it and plenty of people suggest to buy this one and all seems good but there is one big minus of it, there is no DVD slot (which isn't a problem) the problem is with 2 NOT working buttons 'eject cd' and 'dvd' which is very annoying and taking up the space... I've asked support if there is a chance to reuse (re-programme) those buttons for something else but got no response about that.
Anyway I like the Universal Joying unit the most, one volume knob, few buttons, looks much better then ford specific ones but there is a problem with wiring, its needed to get the harness etc from other source and whats worst connect all that to be working, steering wheels controls are the most stressful for me, and need to get some dash kit for installation. So I will end up with a frame in a frame (unit itself), so it will be very visible that this is a after market unit.
.
If you have any other suggestions please dont hesitate to say.
This will be used mostly for youtube, some movies for my kids, playing music from my phone (Xperia Z3), making calls, using internet from my phone or hotspots, navigation (probably google maps as i like them the most). I also want to get the rear camera with it
Any ideas welccome, thanks!
R
What year is your S-max? For the newer ones (post 2011or so) it's hard to change the OEM unit because the airco controls are integrated.
Johan
Verstuurd vanaf mijn SM-T580 met Tapatalk
JohanEe said:
What year is your S-max? For the newer ones (post 2011or so) it's hard to change the OEM unit because the airco controls are integrated.
Johan
Verstuurd vanaf mijn SM-T580 met Tapatalk
Click to expand...
Click to collapse
Hey Johan, thanks for asking...its 2006 Ford S-Max so its easy enough with those specific ones.
I was thinking about it and decided to use one of the specific ones, less hassle with installation and looks better, less after market. But Im not sure which one to pick, I dont have a big budget for this and would prefer to spend around € 200 on it but i dont want to be disappointed with how the unit works, i need it to work mostly with rear camera, playing music from my phone and simultaneously using navigation or playing videos in the back screens (when i finally buy them, plan for future), making calls, some youtube for kids during the trip...i just have enough of drained batteries in phones by 'wheels on the bus' songs lol
In my opinion, as a general rule you should pick up an unit with 2Gb of Ram and physical buttons.
A quad core is also recommended and to be honest I don't think that you need more then quad. There are some new units with octa but I haven't read more info and don't know if they worth the trouble.
Also I would pick a Ford specific unit because it fits perfectly in the dash compared to a standard 2DIN with various adapters that are not always up to standard most of the time.
Sofia looks like a good option, I am also interested in one... I began to read about it... I need to replace my 2 year old 3066 (KYD) unit.
I am mostly seeking it's instant on feature since I got tired of waiting for 30-40 seconds for my unit to boot each time I start my car.
Also I am not sure that you should opt for a CD unit since most don't use CD's anymore.... but that's up to you.
From my experience these aftermarket silver units are a different shade (brighter) of silver compared to the silver dash Ford elements.
nouserr said:
Hi guys
I'm hoping to get some help from you with deciding head unit for my Ford S-Max. I'm doing a research about it but still a bit confused.
I have few units I'm looking at,
1. Ford specific Joying - JY-FL124N2 ( Android 5.1.1 Lollipop 2GB RAM Intel SoFIA 3GR , 4 Cores )
2. Universal Joying - JY-UL135N2 ( Android 5.1.1 Lollipop 2GB RAM Intel SoFIA 3GR , 4 Cores )
Click to expand...
Click to collapse
edit said:
In my opinion, as a general rule you should pick up an unit with 2Gb of Ram and physical buttons.
A quad core is also recommended and to be honest I don't think that you need more then quad. There are some new units with octa but I haven't read more info and don't know if they worth the trouble.
Also I would pick a Ford specific unit because it fits perfectly in the dash compared to a standard 2DIN with various adapters that are not always up to standard most of the time.
Sofia looks like a good option, I am also interested in one... I began to read about it... I need to replace my 2 year old 3066 (KYD) unit.
I am mostly seeking it's instant on feature since I got tired of waiting for 30-40 seconds for my unit to boot each time I start my car.
Also I am not sure that you should opt for a CD unit since most don't use CD's anymore.... but that's up to you.
From my experience these aftermarket silver units are a different shade (brighter) of silver compared to the silver dash Ford elements.
Click to expand...
Click to collapse
Hey
Thanks for spending time to reply.
Yes i also decided to go with a Ford specific, i know the shade might be different but it will still look better then universal unit with frames...The only thing that is annoying is those 2 not working buttons...
It would be good enough if we can programme them but probably those are just blank covers without a button.
nouserr said:
Hey
Thanks for spending time to reply.
Yes i also decided to go with a Ford specific, i know the shade might be different but it will still look better then universal unit with frames...The only thing that is annoying is those 2 not working buttons...
It would be good enough if we can programme them but probably those are just blank covers without a button.
Click to expand...
Click to collapse
Glad I could help, I have a Mondeo (oval shape headunit unit) myself and exchanged quite a lot of headunits, I had 2 x 2DIN units and 2 x Ford specific ones. With the 2 DIN I had a hard tine finding adapters that fit perfectly but never got one with the right shade of silver or the perfect shape to accommodate the dash and the 2DIN unit... So I gave up on 2DIN units based on the adapters headache and overall look.
I mentioned that thing about the silver shade because you don't have this problem if you buy it black
Some people are bothered if it's not the same shade.
Yes, those 2 dummy buttons annoys me as well but there's nothing we can do... Overall the buttons layout is not for my liking. I would have preferred the standard android buttons on one side (back, home...) and multimedia buttons on the other side (play, stop...). But they tried really hard to cut the costs this time using old parts and completely cutting out the CD/DVD unit. For me the CD/DVD is useless because with all the streaming services I haven't touched an CD in the last 3 years. The DVD player in the car is also useless for me... when I drive I need waze/gmaps/igo/here and PlayerPro/XiiaLive Pro.
The Sofia unit needs a little modding from what I have read... you definitely need to stop the killing app service, install Viper4Android because the 3 band default EQ is really poor in general... and probably many more... still reading on the problems the unit has and the workarounds.
One thing I can say for sure.. if it weren't for the XDA forum and all these great people I would never consider buying an Chinese unit because out of the box it's pretty poor software wise.
nouserr said:
I'm really into buying ford specific Joying with SoFIA, i was reading about it and plenty of people suggest to buy this one and all seems good but there is one big minus of it, there is no DVD slot (which isn't a problem) the problem is with 2 NOT working buttons 'eject cd' and 'dvd' which is very annoying and taking up the space... I've asked support if there is a chance to reuse (re-programme) those buttons for something else but got no response about that.
Click to expand...
Click to collapse
Hi all.
I've recently bought the Joying EU-JY-FL121N2 model, so it fits for a bit newer Modeo/S-max/Focus. In my model there is a dvd slot but it's blanked (not as in the pictures of the hu on the Joying website). The most important thing for you may be the fact that the 'dvd' and 'eject' buttons do work, they just don't do nothing on default. With the
Joying 2GB - Steering wheel key customization - V4 (NO KILL)
mod I am able to use them. I can't be 100% sure that there is the same situation with the other models but I suppose that in fact it is.
[email protected] said:
Hi all.
I've recently bought the Joying EU-JY-FL121N2 model, so it fits for a bit newer Modeo/S-max/Focus. In my model there is a dvd slot but it's blanked (not as in the pictures of the hu on the Joying website). The most important thing for you may be the fact that the 'dvd' and 'eject' buttons do work, they just don't do nothing on default. With the
Joying 2GB - Steering wheel key customization - V4 (NO KILL)
mod I am able to use them. I can't be 100% sure that there is the same situation with the other models but I suppose that in fact it is.
Click to expand...
Click to collapse
Can you please take a picture of your unit and show us how it looks... the pictures from the website are old renderings that had the CD slot removed in Photoshop. I would like to see a real picture if possible.
Let me get straight you managed to remap those buttons to do something else with the help of the mod "Joying 2GB - Steering wheel key customization - V4 (NO KILL)"?
Thank you !
edit said:
Can you please take a picture of your unit and show us how it looks... the pictures from the website are old renderings that had the CD slot removed in Photoshop. I would like to see a real picture if possible.
Click to expand...
Click to collapse
Here you go. The whole unit first:
drive.google.com/open?id=0B7ILN8lhPUkFLWxMcVdyNDZQUGM
And now the picture of the "dvd slot". I shot it with flash so you can see there is no hole:
drive.google.com/open?id=0B7ILN8lhPUkFYXFCNEQxbGZyckk
Let me get straight you managed to remap those buttons to do something else with the help of the mod "Joying 2GB - Steering wheel key customization - V4 (NO KILL)"?
Click to expand...
Click to collapse
That is exactly what I did. In my unit I've got the following codes:
31 - DVD button
32 - EJECT button
33 - MEDIA button
34 - RADIO button
[email protected] said:
Here you go. The whole unit first:
drive.google.com/open?id=0B7ILN8lhPUkFLWxMcVdyNDZQUGM
And now the picture of the "dvd slot". I shot it with flash so you can see there is no hole:
drive.google.com/open?id=0B7ILN8lhPUkFYXFCNEQxbGZyckk
That is exactly what I did. In my unit I've got the following codes:
31 - DVD button
32 - EJECT button
33 - MEDIA button
34 - RADIO button
Click to expand...
Click to collapse
Thank you VERY much for the feedback. The pictures are great. They differ a lot from what they posted ... Surprise! the DVD slot is still there... only that is blocked... hmm.....
I pictured that they at least get rid of the slot and the side lights (that I presume that they still lit the fake cd slot)... kinda sloppy decision.... eh... whatever....
The unit looks good... I am definately getting one.
1. Since I have an Mondeo and I will be getting the exact same unit I gotta ask if everything went fine as for some units there are problems with steering wheel buttons (vol up and down, next, prev) especially the M button in the middle (you can't configure it to do anything)? Do they work ok?
2. Did you encounter problems at start (the unit start command, power on, is sent through CAN and actually interpreted and enable by the chinese CAN decoder) ?
3. Does the instant power on feature works ok?
4. The unit hardware buttons backlight colour match the car dashboard?
5. Is the screen bright enough?
6. At night does it dimm enough or do you need to use some software to dimm it even more? (like I feed the need on my unit, if I turn down the brightness even if it goes prett down I still feel the need to make my screen even darker for those white background apps like Google Play Music)
Thank you !
edit said:
1. Since I have an Mondeo and I will be getting the exact same unit I gotta ask if everything went fine as for some units there are problems with steering wheel buttons (vol up and down, next, prev) especially the M button in the middle (you can't configure it to do anything)? Do they work ok?
Click to expand...
Click to collapse
I was able to get the steering wheel buttons work. I only use those on the left side, but all of them work: vol up/down, next/prev and the 'M' button. In my case the wheel buttons work with connecting 'KEY2' wire - sorry but I don't remember details right know - it is described in the manual from Joying (which is included with the HU). At start after cutting some wire I connected it from the wrong side with the KEY2 one, but then I've noticed a youtube clip
youtube.com/watch?v=QaJqWy9Tk24
and did the same way, but I had to stay with the canbus decoder connected (the only difference from the method shown above).
2. Did you encounter problems at start (the unit start command, power on, is sent through CAN and actually interpreted and enable by the chinese CAN decoder) ?
Click to expand...
Click to collapse
I don't quite understand what you've wrote in brackets - I haven't noticed any weird behaviour with starting the unit.
3. Does the instant power on feature works ok?
Click to expand...
Click to collapse
Yes, it does actually. I don't know much about the battery drain - I've got the unit for a week only. But I've seen somewhere in the forum statistics of the processor activity during the night and it was almost 100% deep sleep so I'm hoping it's ok.
4. The unit hardware buttons backlight colour match the car dashboard?
Click to expand...
Click to collapse
Essentially, yes. In more details: I've set up the red colour (the option of changing colour is visible only with car's lights on - not that much obvious to me) and in the daylight it looks a bit pale - you can see it on the pictures I gave. But when it's dark they look very nice to me - the same or almost the same colour as on the dashboard.
5. Is the screen bright enough?
Click to expand...
Click to collapse
We haven't had many sunny days during the last week, so I may only say - I can see what's on the screen, but I don't think I'm going to use it to watch movies - radio, music, bluetooth, maps - for now it's all I need.
6. At night does it dimm enough or do you need to use some software to dimm it even more? (like I feed the need on my unit, if I turn down the brightness even if it goes prett down I still feel the need to make my screen even darker for those white background apps like Google Play Music)
Click to expand...
Click to collapse
I can't tell anything about that to be honest, this is to check yet. I'm not very sure but I think that the 28 march update brought some more options for backlight of the screen (but it may have been there before also).
I ordered it just now, hope it goes well !
Thank you for all the feedback !
---------- Post added at 12:47 PM ---------- Previous post was at 12:09 PM ----------
[email protected];71748303
Yes said:
Did it start instantly each day or there were days when it booted slowly?
Click to expand...
Click to collapse
edit said:
Did it start instantly each day or there were days when it booted slowly?
Click to expand...
Click to collapse
I didn't notice the last question, so maybe the answer is for other people right now - I haven't got any cold boot yet.
Sent from my D5803 using XDA-Developers Legacy app
[email protected] said:
I didn't notice the last question, so maybe the answer is for other people right now - I haven't got any cold boot yet.
Sent from my D5803 using XDA-Developers Legacy app
Click to expand...
Click to collapse
That is nice to know... I am hoping that my unit will be here in the next 2-3 days... and then it's mod time... lots of work
Have you hard moded yours to add additional cooling to the unit (heatsinks or fans) or did you let it stock? Have you noticed cpu throttling ? Have you checked the CPU temp? (not sure how users checked it out, probably with an app)
Don't know if I will mod my unit, I am not ready to give up the warranty from day 1.
edit said:
Have you hard moded yours to add additional cooling to the unit (heatsinks or fans) or did you let it stock? Have you noticed cpu throttling ?
Click to expand...
Click to collapse
AFAIK people here have got some throttling during cpu stress (some benchmarks I think) - I use the unit for listening to the radio, music, phone calls and navigation, for now at least. I don't think those actions will stress the hu at all or maybe in some small amount - I hope so at least...
Have you checked the CPU temp? (not sure how users checked it out, probably with an app)
Click to expand...
Click to collapse
I haven't done this with the unit, but in my phone I've used cpuz. I think there are plenty of such kind of apps in Play store which even don't need root.
Don't know if I will mod my unit, I am not ready to give up the warranty from day 1.
Click to expand...
Click to collapse
Right now I'm not ready to do any hardware mod and surely I don't feel I need one.
[email protected] said:
AFAIK people here have got some throttling during cpu stress (some benchmarks I think) - I use the unit for listening to the radio, music, phone calls and navigation, for now at least. I don't think those actions will stress the hu at all or maybe in some small amount - I hope so at least...
I haven't done this with the unit, but in my phone I've used cpuz. I think there are plenty of such kind of apps in Play store which even don't need root.
Right now I'm not ready to do any hardware mod and surely I don't feel I need one.
Click to expand...
Click to collapse
What is your CAN bus settings? I am really struggling with my CAN bus. My S-Max headlights are blinking when parked. I would love to know what settings you are using.
Iscariot76 said:
What is your CAN bus settings? I am really struggling with my CAN bus. My S-Max headlights are blinking when parked. I would love to know what settings you are using.
Click to expand...
Click to collapse
What kind of headlights do you have? In my car there are h1/h7 bulbs and I can't see any kind of blinking.
I managed to solve my issue by cutting the wire on the alarm sensor pin in the plug between my car and HU.
So I had a Joying MTCB Android car head unit, was originally 4.4 but I had upgraded it to 5.0. Its the RK3188 quad core originally with 1GB of RAM but upgraded to 2GB. I had done a few other hardware mods too (MTC Sound and some FM sound enhancements by changing some caps).
Anyway long story short ribbon cable failure led to smoke and dead headunit.
So I am now looking for a replacement, any suggestions? About my only real requirement are a physical volume knob and as shallow a mounting depth a possible (well I need 4 channel preamp outputs and also reverse camera input but I think those are a given).
I always found the radio reception crappy (well compared to the OEM and even my old Ouku unit) so something with a good radio reception would be good, but again I assume between all the Chinese units its about the same (but if someone has a personal experience of a good one I'm all ears).
I was looking at one of the Eanon 7.1 8core 32GB/2GB ones, looks like it has a shallower depth 131mm than most plus it seems to be up there spec wise. How does the 8 core All Winner compare to like the 4 core Intel? It has the volume knob and everything else I need, though I'd prefer the knob in the top left vs center left but it appears the one in the corner has a larger depth?
jakejm79 said:
So I had a Joying MTCB Android car head unit, was originally 4.4 but I had upgraded it to 5.0. Its the RK3188 quad core originally with 1GB of RAM but upgraded to 2GB. I had done a few other hardware mods too (MTC Sound and some FM sound enhancements by changing some caps).
Anyway long story short ribbon cable failure led to smoke and dead headunit.
So I am now looking for a replacement, any suggestions? About my only real requirement are a physical volume knob and as shallow a mounting depth a possible (well I need 4 channel preamp outputs and also reverse camera input but I think those are a given).
I always found the radio reception crappy (well compared to the OEM and even my old Ouku unit) so something with a good radio reception would be good, but again I assume between all the Chinese units its about the same (but if someone has a personal experience of a good one I'm all ears).
I was looking at one of the Eanon 7.1 8core 32GB/2GB ones, looks like it has a shallower depth 131mm than most plus it seems to be up there spec wise. How does the 8 core All Winner compare to like the 4 core Intel? It has the volume knob and everything else I need, though I'd prefer the knob in the top left vs center left but it appears the one in the corner has a larger depth?
Click to expand...
Click to collapse
Just got this one for my wife's car (Eonon GA2167)- no DVD, so yes very shallow depth - I have an older Eonon 6.2" unit running stock 4.4.4. and there is a huge difference - much faster, better memory handling, obviously more room for apps (32GB) - it does take a hair longer to fully boot up compared to the 4.4.4., but interface, app handling good so far - screen also better (comes with a screen protector applied & a backup in the box) -
Install used similar cables, etc. but be aware that the power/speak leads do not match up to older unit - must rewire - as it's in my wife's car, will have to play with it more as I get the chance, but so far so good - definitely an upgrade from my older unit - I am quite jealous -
Jacklad said:
Just got this one for my wife's car (Eonon GA2167)- no DVD, so yes very shallow depth - I have an older Eonon 6.2" unit running stock 4.4.4. and there is a huge difference - much faster, better memory handling, obviously more room for apps (32GB) - it does take a hair longer to fully boot up compared to the 4.4.4., but interface, app handling good so far - screen also better (comes with a screen protector applied & a backup in the box) -
Install used similar cables, etc. but be aware that the power/speak leads do not match up to older unit - must rewire - as it's in my wife's car, will have to play with it more as I get the chance, but so far so good - definitely an upgrade from my older unit - I am quite jealous -
Click to expand...
Click to collapse
Thanks for the reply, I ended up pulling the trigger on a GA2167 (coupon on Amazon and a free camera too - which will just get sold since I already have a camera).
What was your older Eonon (3066, 3188 or something different, MTCB/D?) just for comparison sake. Nice to hear that it is a big step up, I am also looking forward to the shallow depth, it really was a squeeze before now I should have plenty of room.
Do you have SW controls hooked up? Do they work with 3rd party apps, i.e. Pandora, etc. I had to use some workaround on my previous one but other than that everything else pretty much worked the way I wanted on the stock ROM so hoping for the same.
Winca s190
CarNaviPlayer.com
Jstyants said:
Winca s190
CarNaviPlayer.com
Click to expand...
Click to collapse
Can you expand on that? Looks like it doesn't meet my size requirements (too deep), has significantly reduced specs (half the cores and half the storage) of the GA2167) is almost $150 more price wise, has only 2 preamp outputs not 4, so unless there radio reception is significantly better I see zero benefit in this product.
Just got my GA2167 and wow is it quick, compared to my RK3188 with 2GB RAM it boots up a bit quicker but also the Radio actually plays (if it was playing before) part way during boot up. Everything else works has expected, I think radio reception is a little better too, sound quality is good its quite a bit louder than my previous unit.
Install was easy, since my car uses standard ISO connectors. Loving the smaller depth, have to tweak my brackets now but I should get it to sit flush now, before it would stick out a mm or so just because the rear was so cramped.
USB OBDII reader worked with no problems and so did my SW controls.
jakejm79 said:
Can you expand on that?
Click to expand...
Click to collapse
Nah can't be bothered
My suggestion and it's brill, research, google does wonders
jakejm79 said:
Just got my GA2167 and wow is it quick, compared to my RK3188 with 2GB RAM it boots up a bit quicker but also the Radio actually plays (if it was playing before) part way during boot up. Everything else works has expected, I think radio reception is a little better too, sound quality is good its quite a bit louder than my previous unit.
Install was easy, since my car uses standard ISO connectors. Loving the smaller depth, have to tweak my brackets now but I should get it to sit flush now, before it would stick out a mm or so just because the rear was so cramped.
USB OBDII reader worked with no problems and so did my SW controls.
Click to expand...
Click to collapse
So have you had any issues with differing sound quality with the unit? On my current unit I can't use some apps because the sound quality is so poor compared to others. I cant use the Pandora or spotify app on the unit because they are so quiet and barely even push my sub, but if I use blue tooth and have it come from my phone it fixes. I'm wanting to upgrade to a unit that I can get consistent sound quality from on the apps and run front and rear channels from an external amp as well as sub and this unit does have the pre outs I need and the price is pretty good.
Jstyants said:
Nah can't be bothered
My suggestion and it's brill, research, google does wonders
Click to expand...
Click to collapse
unless i'm seeing something this still runs on the a9 and 2gb ram? curious what makes this better than the px3 px5 or sofia intel chips, some with 4gb.
snaggle2thtiger said:
unless i'm seeing something this still runs on the a9 and 2gb ram? curious what makes this better than the px3 px5 or sofia intel chips, some with 4gb.
Click to expand...
Click to collapse
**** knows
Jstyants said:
**** knows
Click to expand...
Click to collapse
Ok, thanks for the input.
snaggle2thtiger said:
Ok, thanks for the input.
Click to expand...
Click to collapse
Please use the "thanks" button in future, instead of creating new posts to say thanks
Enjoooyyy
I'll remember that for some one that actually helps out
snaggle2thtiger said:
So have you had any issues with differing sound quality with the unit? On my current unit I can't use some apps because the sound quality is so poor compared to others. I cant use the Pandora or spotify app on the unit because they are so quiet and barely even push my sub, but if I use blue tooth and have it come from my phone it fixes. I'm wanting to upgrade to a unit that I can get consistent sound quality from on the apps and run front and rear channels from an external amp as well as sub and this unit does have the pre outs I need and the price is pretty good.
Click to expand...
Click to collapse
I haven't had any issues with sound quality (I know some people on some unit have an issue where some apps only play over the front two speakers at a lower quality - kind of like the system thinks its navigation audio - but I haven't experienced that). In all fairness though all I use is Pandora and FM Radio at the moment. I do plan on dumping my whole MP3 collection over and will see how that handles it and what player (default or other) I end up using.
The only quirks I have of right now is:
1. No way to change the car logo to a custom one - mine isn't listed, not that its a huge deal since the Car logo only shows for a second or two
2. Voice dialing, at the standard DPI the Google app thinks its a tablet adjusting the DPI fixes that but breaks other apps (FM Radio, etc). Also when it is working it doesn't parse the phone number to the BT app, other 3rd party dialers do.
3. I constantly get the prompt to select an app for a USB device when starting, I have an USB OBDII adapter, even when selecting Torque Pro has the default app it doesn't seem to remember and asks me at next boot.
4. I can't remove the default widgets on the stock launcher - not a huge deal but my car has a clock with date right above the radio, no need to show it on the launcher too, would rather put some torque widgets in its place.
But all in all I'm happy with it, definitely a lot more snappy than my RK3188 unit even with a 2GB and 5.0 upgrade, some quirks but they all have quirks and nothing deal breaking.
jakejm79 said:
I haven't had any issues with sound quality (I know some people on some unit have an issue where some apps only play over the front two speakers at a lower quality - kind of like the system thinks its navigation audio - but I haven't experienced that). In all fairness though all I use is Pandora and FM Radio at the moment. I do plan on dumping my whole MP3 collection over and will see how that handles it and what player (default or other) I end up using.
The only quirks I have of right now is:
1. No way to change the car logo to a custom one - mine isn't listed, not that its a huge deal since the Car logo only shows for a second or two
2. Voice dialing, at the standard DPI the Google app thinks its a tablet adjusting the DPI fixes that but breaks other apps (FM Radio, etc). Also when it is working it doesn't parse the phone number to the BT app, other 3rd party dialers do.
3. I constantly get the prompt to select an app for a USB device when starting, I have an USB OBDII adapter, even when selecting Torque Pro has the default app it doesn't seem to remember and asks me at next boot.
4. I can't remove the default widgets on the stock launcher - not a huge deal but my car has a clock with date right above the radio, no need to show it on the launcher too, would rather put some torque widgets in its place.
But all in all I'm happy with it, definitely a lot more snappy than my RK3188 unit even with a 2GB and 5.0 upgrade, some quirks but they all have quirks and nothing deal breaking.
Click to expand...
Click to collapse
Thank you! I'm happy to head about the Pandora sound that is how I'd prefer to listen but haven't been able to because of the issues on my unit and YouTube is tedious to use. When you say you can't change to a custom boot logo, does it still have some preloaded options? Or is it just the brand of the radio that boots?
snaggle2thtiger said:
Thank you! I'm happy to head about the Pandora sound that is how I'd prefer to listen but haven't been able to because of the issues on my unit and YouTube is tedious to use. When you say you can't change to a custom boot logo, does it still have some preloaded options? Or is it just the brand of the radio that boots?
Click to expand...
Click to collapse
Yes there are still about 20 or so Manufacturers to pick from, mine just isn't on the list.
Great, I think you just helped me make my decision
Just ordered the Eonon GA2167, should have it in next weekend. I'll let you know what I think of it. I was thinking about the XTRONS 4GB unit, but I just didn't see enough talk about it to feel comfortable. I'm replacing a EZTronics 1GB unit, so I'm sure I'll see a nice upgrade.
For those who have it, it says Micro SD compatible, but I don't see a slot for it?
breezeli said:
Just ordered the Eonon GA2167, should have it in next weekend. I'll let you know what I think of it. I was thinking about the XTRONS 4GB unit, but I just didn't see enough talk about it to feel comfortable. I'm replacing a EZTronics 1GB unit, so I'm sure I'll see a nice upgrade.
For those who have it, it says Micro SD compatible, but I don't see a slot for it?
Click to expand...
Click to collapse
Beneath the volume knob a door opens up and reveals a mSD card slot and mini USB port.
I have one f this units and I am experiencing problems with the apps sound Have infinity 6x9's and 6 1/2 PPI components in the front a 1000 watt dual amp, it takes a while for the sound to come in then is very distorted I have the gain on the amp matched to the unit on the apps the front speakers barely sound. it really sucks. any fixes? how is the internal amp?
Hi there,
My android head unity started to show some weird behavior, the middle section of the digitizer seems to not respond as expected.
Soon(I'm waiting for some subwoofer cables), I'll tear it down and clean the contacts but not sure if this gonna solve my issue. Are there any replacement digitizers that you know of?
My unit is a small dual core android unit(Android 4.4.2 stock, change it to 4.4.4 custom some time ago) with 1GB of ram(back then I've paid 538 USD for it! it was the highest model in 2014 - for Seat Ibiza 6J)
P.S. There are some units now I see with PX6, 4GB of ram that cost less than 200 USD for my ibiza. But I'd prefer to not go there as my android unit is fully functional except the middle section of the digitizer
P.S.2 Symptoms? well I press something in the middle and it's like I'm scrolling to the left or right instead of selecting what I need
Hi everyone,
first of all, my apologizes in advance for duplicating the thread, but I've got the feeling that the original HERE is not in the right place, and therefore I've got 0 comments since open.
Therefore, I transcribe the problem here.
After buying an android head unit for the Fabia mk3 from my wife and testing it at my workshop, I got mad because the front panel buttons were not working. I was almost giving up when I decided to install the radio anyway just to profit from the navigation by forcing us to use it only by the touchscreen, when I found out that the front panel buttons get activated only when the head unit receives the can-bus signals.
However, some days after the installation and the happiness of solving the issue, big surprise when we found the car with the battery dead. o after bringing it back to life, I removed the android radio and checked the current drainage. It was around 300mA for the car switched off. Too much for a car that is parked so long due to the COVID-19 quarantine.
After asking Google, I found out that in the new VAGs, included the Fabia mk3, there is no longer a "switched-off" power cable arriving to the radio. Only an "always-on" one. It seems that the original radio is being switched off by the can-bus signal, bringing the current drainage to a minimum. What is this minimum, I do not know as I haven't measured it.
This doesn't seem to be the case with my android radio which is sucking 300mA when turned off by the can-bus.
So I looked for a "switched-off" signal from the fuse panel and I brought it all the way up to the radio to force the total current shut-off when switching off the car.
Happy with the solution, my wife takes the car again some days after and and told me that the radio was not starting. I went to check it and I found the unit getting blocked at the "android" starting screen.
Sometimes it ends up just blocked there. Sometimes shows an alternating picture between the word "android" and a kind of arrow picture. I share here a couple of screenshots and a small video.
I've tried the reset button, even with the 15 seconds wait, and nothing happens, I get the same blocked starting screen...
Any ideas what can this be? It looks pretty damn bricked to me but I refuse to give up with the radio, it looked very well installed in the car and I was able to "taste" the capabilities right before the battery drainage and it was even sounding better than the ****ty original radio.
Here the head-unit specs:
Android 9.0 System
Capacitive Screen HD 1024*600 1080P HD Video
CPU Rockchip PX3 Cortex A9, 4 core 1.6GHz
2GB DDR3 RAM Memory
16 GB Nand Flash
Hi everyone, I'm new to the group! I've been an Android user for a very long time and know my way around the phone, but still new to the head units! I've just bought myself a unit and it's great so far! The one thing that bugs me is the the display doesn't fit the screen on the left side by a few mm. When I check on CPU-Z it shows the display as 1280x720, as it also does when I go into the Android settings. The screen is 10.1" although shows in CPU-Z as 6.89"? I think my unit should be set at a different resolution as I've seen other very similar units sold online but with 1024x600 resolution. I'm running Android 10 currently and no root. Does the Android 10 firmware installed have a different resolution to my unit itself do you think? Let me know if you need any information from me! Any help is much appreciated. Thanks