Hi everyone, I'm new to the group! I've been an Android user for a very long time and know my way around the phone, but still new to the head units! I've just bought myself a unit and it's great so far! The one thing that bugs me is the the display doesn't fit the screen on the left side by a few mm. When I check on CPU-Z it shows the display as 1280x720, as it also does when I go into the Android settings. The screen is 10.1" although shows in CPU-Z as 6.89"? I think my unit should be set at a different resolution as I've seen other very similar units sold online but with 1024x600 resolution. I'm running Android 10 currently and no root. Does the Android 10 firmware installed have a different resolution to my unit itself do you think? Let me know if you need any information from me! Any help is much appreciated. Thanks
Related
Dear all.
I'm Ramzi and I'm totally new in this type of technology so I urge you to help me.
I have Chinese unit dvd in my Hyundai Sonata 2013.
Brand : HITS car DVD, HYUNDAI SONATA LED10-11 / SUPER HIGH RESOLUTIONS 1024×600.
Modal: ANHY822 / 8913AG
Website: http://www.hicesan.com/?p=719
by mistake I flashed android MCU update to my unit white it's Wince, the dvd is still working but the screen is black.
full story
At beginning I tried to update it with last Android software for Middle East from HITS site,so I tried many time but it didn't read the Update from the SD card. So I thought that I should update the MCU first, so I flashed Android MCU update to my unit while it's Wince, so screen goes black and the dvd is still working with black screen. Because I wasn't aware that my unit is Wince not Android.
So now I urge you to help me, what should I do to get the screen back and if i can change from Wince to full android unit.
I'v Emailed HITS company, but unfortunately the r not helpful.
Please guide me with proper steps and software because there is no technical in Yemen for such unit.
Regards
Ramzi
Hello,
The same thing happened to me, i have a dsr-n 270 head unit.
i updated the MCU as the constructor's instruction but the screen stays black now.
When i power it on it writes android as if it will start normal then the screen becames white then black.
I detect the HU bluetooth and the buttons make sound when i press.
someonne can help us pls?
Sorry for my english....
No one to help us??
Sam9933 said:
No one to help us??
Click to expand...
Click to collapse
Have you tried contacting the manufacturer? Maybe they could point you in the right direction. My knowledge is limited, but I would look into something for reinstalling the MCU/Firmware from download/and or recovery mode. Sorry I couldn't be of any more help. But that is where I would start looking. Its not a pure Android unit, so it may be more difficult to do as from what I understand winCE units emulate the android OS from inside the winCE OS (not sure if this unit is only winCE or if it is both winCE/Android.)
Yes i tried to contact "pearl" the seller of this model, they asked me to sent it to them 35 euros diagnostic+shipping cost.
They are not willing to help because a lot of people got the same problem, they gived us an update that breacks the head unit.
yeah i looked for the recovery/donload mode buit found nothing.
THis brand are not helpful and they keep all information.
All people who want to buy an android head unit avoid Navgear...
Yeah, bud... I'm sorry you got the shaft. That really sucks man. I'm sorry I couldn't help you more.
Hi everyone, I'm new here. Please forgive me if this is covered already, but I've spent over an hour searching but can't find anything helpful. I recently installed a XTRONS PB65WRJP in my Jeep Patriot. It's an Android 6.0, 2GB RAM, MTCE, 8 core unit with an 800x480 resolution. I like the unit for the most part, it has snappy performance and most things work great. However, one big gripe I have with it is it's crappy low resolution screen. For most things it's fine, but for a few things it's not, most notibly Google Maps. On my phone Google Maps is great, but on my HU the buttons and everything is so large that you really can't see the map. I've tried Resolution Changer Pro, but it didn't seem to do anything. Is there another app that can help with this? Any help would be very greatly appreciated.
Hi guys,
So I got this 9" display installed in my Outlander (2010). Firstly, not that happy about the viewing angle.. Apart from that, the home screen is just really ugly and it feels a bit slowish.. I'm completely new to this side of Android (head units) so I'm looking for some help please.
Attached is all the info I could get:
Android 7.1.1
Quadcore T3
MCU Version: T5.3.19-150-10-C07101-180707
VW (T5.3.19, CONFIG, RDS, BC6, Color, NODVD, Rohm37XXX, TEF685X)
System Version: V8.3.2_20180112.162230_TW2-SP3
I would like to get a nicer looking home page and if I can get it to work a bit faster that would be awesome.
RenVilo said:
Hi guys,
So I got this 9" display installed in my Outlander (2010). Firstly, not that happy about the viewing angle.. Apart from that, the home screen is just really ugly and it feels a bit slowish.. I'm completely new to this side of Android (head units) so I'm looking for some help please.
Attached is all the info I could get:
Android 7.1.1
Quadcore T3
MCU Version: T5.3.19-150-10-C07101-180707
VW (T5.3.19, CONFIG, RDS, BC6, Color, NODVD, Rohm37XXX, TEF685X)
System Version: V8.3.2_20180112.162230_TW2-SP3
I would like to get a nicer looking home page and if I can get it to work a bit faster that would be awesome.
Click to expand...
Click to collapse
Hey there, were you able to update your unit?
I have the same one and I am having issues with Bluetooth. Phone calls via bluetooth are laggy and of bad quality. What about you?
Hi, Please i have same unit and mine is stuck on the boot logo, can somone please help me on this?
Hi all, I recently purchased a Bonroad 8.8" android head unit for a BMW 3 series.
Everything works great, except I cannot find where to enter the extra menu.
I'm having a few issues and their response time has been slow.
My car is a manual, but the head unit thinks its an automatic. The problem is when I shift into reverse I cannot get the reverse camera to appear on screen.
Second is i'm trying to change the screen resolution so the original BMW menu is not cut off.
It is currently running android 10.0. Does an MCU file exist anywhere that I can flash it to get access to the extra menu?
Thanks!
FLBimmer said:
Hi all, I recently purchased a Bonroad 8.8" android head unit for a BMW 3 series.
Everything works great, except I cannot find where to enter the extra menu.
I'm having a few issues and their response time has been slow.
My car is a manual, but the head unit thinks its an automatic. The problem is when I shift into reverse I cannot get the reverse camera to appear on screen.
Second is i'm trying to change the screen resolution so the original BMW menu is not cut off.
It is currently running android 10.0. Does an MCU file exist anywhere that I can flash it to get access to the extra menu?
Thanks!
Click to expand...
Click to collapse
hey im facing the same issue did you ever get this sorted out?
f32mick said:
hey im facing the same issue did you ever get this sorted out?
Click to expand...
Click to collapse
I got “instructions” from the seller on changing the resolution, but I cannot access the so-called advanced settings. I cannot see my oil level anymore on the iDrive! I don’t want to get a low oil warning. I cannot change from km to mph. I get BT warnings in Chinese as well (it is funny and not really an annoyance).
Wondering has anyone seen this problem, I have the bonroad android screen for f30. When I open the door a 3 series comes up but when I go into reverse camera a 1 series comes up?
Hi guys, I’m new to the forum so apologies if this is in the wrong section.
Im looking for a bit of help if possible please, I’ve got the PX5 running android 8 installed in my 2015 Vauxhall Astra J VXR.
When running the standard cd400 usually when I put it into VXR mode the instrument cluster turns to red from white however since installing this unit it stays white when in VXR mode.
I’m presuming it’s something to do with the canbus settings however I can’t find it, anyone got any ideas?
Pictures attached are of the software it’s running...