Database Users

ZE500KL Can't access fastboot or recovery mode PLEASE HELP, URGENT

Please help, I need proffessional help.
Android Phone: ASUS Zenfone 2 Laser 5.0 (ROOTED)
Android Firmware: 5.0.2 Lollipop
Aim: To enter into Fastboot mode and Recovery Mode without problems
Situation: Recently installed TWRP Recovery in-app and through software, but when I try to enter in Fastboot Mode (HOLD POWER & VOLUMEUP) or even Recovery Mode (HOLD POWER & VOLUMEDOWN), I just end up in a hanged out ASUS Logo. I can't do anything except pulling out the battery myself and putting it back then booting the device through power button to boot it normally. I don't know if it's the problem with the model, or the phone's system itself, or it's just a bug, or a problem when I rooted my device through ADB.
(Note: When I rooted the device, I wasn't even able to see the blue "FASTBOOT MODE" when I tried it, I only saw the ASUS logo as well.)
For anyone who has any idea on what's going on with my device, please reply and help me. I really want to have the benefits of a rooted phone completly and I'm a new root user so I need assistance.

For anyone who has an idea on what I've done or on what should I do, please help me. Someone told me that I flashed the recovery and locked the bootloader, so it got damaged. If so, would Unlocking the Bootloader (from Wiki.CyanogenMod's Site) help my case?

CrimsonShade09 said:
For anyone who has an idea on what I've done or on what should I do, please help me. Someone told me that I flashed the recovery and locked the bootloader, so it got damaged. If so, would Unlocking the Bootloader (from Wiki.CyanogenMod's Site) help my case?
Click to expand...
Click to collapse
Do you can acesse to twrp recovery on your device

Same problem.....waiting for helping, please

mohamedelkholy said:
Do you can acesse to twrp recovery on your device
Click to expand...
Click to collapse
I think I have "access" to TWRP recovery. However, I can only access it through booting it up from ADB. I used the command "adb reboot bootloader" to boot it to fastboot mode, however only the ASUS screen appears but I treated it as the fastboot mode itself. Then I checked if it was really on fastboot mode through "fastboot devices" and it showed my serial number. I can only enter into TWRP using "fastboot boot twrp.img" . I don't know if I already installed it because although I opened it, I can't do it from the phone (POWER+VOLUMEDOWN)

Ok now boot twrp and then flashamodified zip or cm13 and your phone should eork you dhould to have unlockrd bootloader

Hi to all, i'd re-open this 3d for the same problem. After months I'm trying to re-sleep my ZE500KL. It was in "can't load invalid boot image" loop. I tried to force recovery mode and (wrongly) force to update from update.zip the stock fw stored in the uSD.
Since this time I can't enter in recovery mode more but fastboot only. The problem is that, in spite of the USB drivers are installed, fastboot does not recognize any connected device.
I've run Win 10 pro with a zenbook ux333fn laptop and I remembered android 6 on the phone, the last time I saw it alive.
I've tried also to install twrp 3.1, with no positive results.
Anyone can suggest me any solving way?
Thanks to all

...anybody?

Up.....

sh4d3_ said:
Hi to all, i'd re-open this 3d for the same problem. After months I'm trying to re-sleep my ZE500KL. It was in "can't load invalid boot image" loop. I tried to force recovery mode and (wrongly) force to update from update.zip the stock fw stored in the uSD.
Since this time I can't enter in recovery mode more but fastboot only. The problem is that, in spite of the USB drivers are installed, fastboot does not recognize any connected device.
I've run Win 10 pro with a zenbook ux333fn laptop and I remembered android 6 on the phone, the last time I saw it alive.
I've tried also to install twrp 3.1, with no positive results.
Anyone can suggest me any solving way?
Thanks to all
Click to expand...
Click to collapse
Up...

QFIL or AFT can be the solution.
I have a similar problem, a hard bricked Z00ED (ZE500KL) not able to get into fastboot or recovery.
after reading some thread here an there. that are Processor / Chipset specific flash tools that help flash bootloaders and repartition hard bricked device.
For mobiles with MediaTec devices, there is a tool called SP Flash Tool. I wasted a whole day with it. then understood that Z00ED (ZE500KL) has a Qualcomm Processor MSM8916
Therefore we need a Qualcomm Flasher here (QFIL )
But nos I am stuck with getting firmware for ZE500KL that can be used by QFIL tool, It should have a firehouse*.mbr file that is the programmer (dependent on CPU of the phone) and a rawprogram*.hex file that I don't know where to get from.

Thanks... It seems a bit less wild, but in any case no solving, yet

Up! ...anyone?

Up!

LeEco Le Pro 3 Elite bricked...

Hi Guys,
unfortunately I bricked my device. I tried to install the Original ROM, because before this I got the Shopping ROM from Geekbuying. First I unlocked the Bootloader and turned on USB Debugging in Developer options. All worked fine, I did everything like from the manual. TWRP workes fine, too. After I flashed the ROM it restarted and it stucks in Boot Logo (Not EUI, that before!). Showy is that it still looks like the old EUI (The words are still on chinese and not english like in 5.9.0.26S - if it is in english in this version :silly. EUI Version was 5.8.0.20S to the newest (5.9.0.26S). I only can reboot in Fastboot Mode. If I try to boot in Recovery it instant restarts. I don't know if USB-Debugging and unlock oem is still on because I did a factory reset before the flashing. Also ADB says that it couldn't unlock the bootloader (See Screen). Only in fastboot mode in can see the Device in Device Manager, also I could install the correct driver for the device (See in Screenshot).
I really hope somene can help me and thanks for all answers.

Hello
could try to download this link and try -- I see is a file from 2017-08-05 11:10
http://jingyan.baidu.com/article/618...52ff1536d.html
Requires Chinese proxy seems.
here is another version x722 android 6.1 .
Try to do it on a pc windows that do not use, because it seems to have malware the program to flash.
version stock, and root.
http://www.xianshuabao.com/rom/letv/22820.html
http://www.xianshuabao.com/course/letv/22820.html

try booting TWRP with fastboot - 'fastboot boot <path/to/twrp.img>' Although if your bootloader has got relocked the only way you'll be able to get it going is by getting the phone in EDL mode and using QFIL to flash a factory rom
You can boot to EDL from Fastboot using the modified fastboot application below.
https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292

http://www.xianshuabao.com/rom/letv/22820.html is ROM, not QFIL, there is no QFIL for X722 (elite).

evlo said:
http://www.xianshuabao.com/rom/letv/22820.html is ROM, not QFIL, there is no QFIL for X722 (elite).
Click to expand...
Click to collapse
That ROM is x720.
WAXCNFN ... => x720
WIXCNFN ... => X722
Greetings.

I also have a x722 from gearbest, when you flash a twrp on vendor 020s from geek is it working ok?
Can you then boot from rom to twrp and back to rom?

Zupy1 said:
I also have a x722 from gearbest, when you flash a twrp on vendor 020s from geek is it working ok?
Can you then boot from rom to twrp and back to rom?
Click to expand...
Click to collapse
i suggest you flash to 020S rom , it is bootloader unlock, don't update to 026S , it will bootloader lock , can not root and install twrp.

I already (long time ago) flash twrp - i dont need to flash another rom because i flash twrp over 020 from geek.

QFIL to Leeco le pro 3 (Lex722)

Hello everyone!
my problem is the next: I tried install a rom of MIUI but fail in my device, after, I tried to install differents roms but nothing work, just showed me the logo Leeco and no more, no avance from the logo.
But I still had recovery with TWRP and I thinked I can install official rom 26s, It was my error.
Now follow with the same problem but now I not have recovery mode (show me recovery with logo Leeco but it instantly turns off ) and bootloader is block.
My only hope, is QFIL to recover recovery mode o any rom, Does anyone have it or tell me how to create one?..
Please anybody will can help me, I have this problem 3 days ago.
Sorry for my bad english, I am learning.
PS. I tried with post of tora33 but no work
FlashOne2.0\le_zl1_qfil_ufs\prog_ufs_firehose_8996_ddr.elf"
22:00:34: ERROR: function: rx_data:247 Error occurred while reading from COM port
22:00:34: ERROR: function: sahara_main:854 Sahara protocol error
22:00:34: ERROR: function: main:265 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
Click to expand...
Click to collapse

Are you sure you got Qualcomm drivers installed and your phone is in 9008 mode? Also try rebooting and re-enter 9008 mode. But the biggest problem that there is no qfil restoration files for x722 if I remember correctly, chances to boot with x720 ones are quite low.

Does your fastboot work volume and power down same time??
Sent from my LEX727 using xda premium
---------- Post added at 11:09 AM ---------- Previous post was at 10:53 AM ----------
worked on the phone i got off amazon. thanks!
[quote name="wpbear" post=71566961]This works on lastest USA update Stock (21s).
Have ADB/Fasboot tools on your computer
Make sure you have enabled the developer tools, turned on USB debugging, and authorized your computer on your device
Put emmc_appsboot.mbn from this zip (Download: x727-5.8.019s_bootloader-unlock.zip) in your adb directory on your PC
Put twrp.img from this zip (Download: TWRP) in your adb directory on your PC
On PC open admin CMD prompt
go into fastboot mode on phone (hold power and VOL -)
on PC type:
fastboot devices
fastboot flash aboot emmc_appsboot.mbn
after flash force reboot using Power button. It will ask for a password, just ignore it and reboot back to fastboot by forcing power down then reboot to fastboot (hold power and VOL -)
on PC type:
fastboot devices
fastboot oem unlock-go
fastboot flash recovery twrp.img
boot into twrp (force power down, then hold POWER and VOL +)
TWRP will boot, choose modify system. Choose wipe - then swipe to factory reset, when that is done - then advacned then format data
In TWRP ensure MTP is enabled. In Windows File Explorer the phone should be visibile. Drag and Drop your new ROM.zip, gapps.zip, SU.zip etc...
In TWRP INSTALL new ROM and other zips; choose wipe/dalvik/cache
If you unlock bootloader push power off until it goes off then put it back into fastboot flash twrp .img them power off again power on when phone vibrate volume down you see stock recovery then twrp.
Reboot System.
DONE![/QUOTE]
Sent from my LEX727 using xda premium

voron00 said:
Are you sure you got Qualcomm drivers installed and your phone is in 9008 mode? Also try rebooting and re-enter 9008 mode. But the biggest problem that there is no qfil restoration files for x722 if I remember correctly, chances to boot with x720 ones are quite low.
Click to expand...
Click to collapse
Yeah, that is the problem, I have the drivers and my computer recognize it, the problem, always show the error sahara.
And flash in fastboot no work because bootloader is block and not let me to do flash of anything.
Someone know how to create a qfil? I am developer and I could try but I not found tutorial how to do and I do not have it clear.

zeckAlexs said:
Yeah, that is the problem, I have the drivers and my computer recognize it, the problem, always show the error sahara.
And flash in fastboot no work because bootloader is block and not let me to do flash of anything.
Someone know how to create a qfil? I am developer and I could try but I not found tutorial how to do and I do not have it clear.
Click to expand...
Click to collapse
Every so often the same questions and the same answers.
You should read more. The X722 subforum is for something.
There is no qfil for X722, and there are no magic solutions of X720 / X727. This is an X722, it is locked and NOTHING of X720 / X727 is going to fix it.
Read this:
https://forum.xda-developers.com/le...velopment--and-mods/try-unbrick-x722-t3686191
Greetings.

How do people keep ending up with bricks? Guess I'll have to find a mod to contact them about stickying a thread about the x722 here about stock 26s. It's a bad idea. Never update your x722 to stock 26s, because your bootloader will get locked when you try to flash TWRP. The only way to get out of 26s is to flash Batyan's 01D ROM (in the x722 Development section here), and then unlock your bootloader and flash TWRP. Flashing TWRP over stock 26s will cause a permanent brick because there's absolutely no QFIL file available for this device. Even in China.

sk8223 said:
How do people keep ending up with bricks? Guess I'll have to find a mod to contact them about stickying a thread about the x722 here about stock 26s. It's a bad idea. Never update your x722 to stock 26s, because your bootloader will get locked. The only way to get out of 26s is to flash Batyan's 01D ROM (in the x722 Development section here), and then unlock your bootloader and flash TWRP. Flashing TWRP over stock 26s will cause a permanent brick because there's absolutely no QFIL file available for this device. Even in China.
Click to expand...
Click to collapse
You know I don't really know how they keep doing it but I seen a lot new ones getting this phone and not really studying how to do this stuff and their not paying attention to what model this have this a solid phone.
Sent from my LEX720 using xda premium

This is true ?
https://dc5.androidfilehost.com/dl/...40/818070582850488404/le_zl1_qfil_ufs_fix.zip

paiktaras said:
This is true ?
https://dc5.androidfilehost.com/dl/...40/818070582850488404/le_zl1_qfil_ufs_fix.zip
Click to expand...
Click to collapse
ZL1 its x720/x727 not x722, it's a fix for ppl thata not work the normal qfil rom.

I stuck on Boot Logo

I was trying to flash modified recovery image using magisk after that my phone is dead almost.
My phone don't boot in to android. I can't charge my phone because I get message on the beginning
my system is moddifyed my phone shut down automatically after 5 seconds, also i can't unlock bootloader via fastboot i get information "unlock operation is not allowed" .
I have Leeco 650x with mtk helio x27.
I only flashed modified recovery in magisk after that I disabled usb debug and oem unclock. after restart my phone I can't unlock my bootloader and I can't continue bootup to android.All I need to do is restore somehow original recovery.
But how to do that without unlocked bootloader in my situation?
I try to flash new Rome using flash tool but I have error 0xC0030003
Is here any powerful person to solve the problem.

It looks like you flashed firmware for wrong device. Settings say x650 instead of x720 (I am assuming you have x720). I think your best bet is probably the QFIL restore.
https://www.google.com/amp/s/forum....to/guide-unbrick-le-pro3-tested-t3622340/amp/
If you do not have an x720, please disregard this post.

I have 650x with mtk processor 100 procent. I only flashed modified recovery in magisk after that I disabled usb debug and oem unclock. after restart my phone I can't unlock my bootloader and I can't continue bootup to android.All I need to do is restore somehow original recovery.
But how to do that without unlocked bootloader in my situation?
I try to flash new Rome using flash tool but I have error 0xC0030003

LucasNoob said:
I have 650x with mtk processor 100 procent. I only flashed modified recovery in magisk after that I disabled usb debug and oem unclock. after restart my phone I can't unlock my bootloader and I can't continue bootup to android.All I need to do is restore somehow original recovery.
But how to do that without unlocked bootloader in my situation?
I try to flash new Rome using flash tool but I have error 0xC0030003
Click to expand...
Click to collapse
You need to find the LETV X650 Scatter file. I do not know those phones very well. A X600 file may work, you will need to do a lot of research before attempting or you can damage your partitions.
Here is a link for the firmware. https://fapgem.com/video/4tnZoa0H9Q...-firmware-eui-5925s-install-via-fastboot.html
There is a chance that if you can get your PC to see the phone that you may be able to flash the stock firmware. It will not hurt to try it. Again , read extensively before doing anything.
There is a website called Android brick. They have an article on unbricking your phone but I could not access the link. Just Google, or use DuckDuck Go and search Letv X650 Scatter file unbrick.
I just now found this, which may be your solution: https://stephaniefulke.blogspot.com/2015/09/how-to-flash-unbrick-your-mediatek.html
Good luck

Do I need to backup persist.img?

Hi. My phone says: <<Your device is corrupt. It can't be trusted and will not boot>>, bootloader is locked, I can access only fastboot and EDL. So, I'm going to use MSM tool to unbrick my phone, if I'm not going to switch, for example - from IN version to NA, do I need to backup persist.img? The problem is - I don't know how to backup it, when I even can't reach recovery, my device isn't rooted and I can go only to fastboot and EDL. Sorry for my English.