Database Users

How To Flash hard Bricked Mi 5s/ Mi 5S Plus No edl No Fastboot No test Point

**************Flashing Hard Bricked MI 5s/ MI 5S Plus***********
New Fresh and Working Flash mi 5s 5s Plus, using Deep flash mod, No Fastboot, No Edl, No Test point, very easy and simple, Hit :good: if this helpful for you,
Instructions-
[*]First of all Prepare Deep Flash Cable using Below Guide
[*]Attached Both Coper Wire and then connect this cable with your pc
[*]Now connect your Device to usb [Make Sure Your phone is switched Off]
[*]On Pc go To Device manager and Look on port, {No Available] Don't Worry]
[*] Pull the attached Wire and look Device Manager a New port Is Available HS-USB Diagnostic 9008[ com5, com17 etc]
[*]Ok your Device is ready For Flashing
[*]Run mi Flash click on Browse and Load Fastboot Rom Folder
[*]Click Refresh and Then Flash Done, wait a few Seconds While flashing IS complete ,
[*]Done,

Just like that I freed my Mi5s 64GB version with shop ROM from uuonline and could unlock the bootloader to flash xiaomi.eu ROM....

XN Logos said:
watch Video-
unable to embed video/ playback id error, watch on Youtube
Click to expand...
Click to collapse
I do this on my mi 5s plus but when it starts up its stuck on the MI logo....with no way to shut the phone off. I can get to fastboot or recovery mode but those dont really do anything for me as i have a locked bootloader. Im trying to flash the latest global stable rom from the miui forums. Would you be able to help me?

umirza85 said:
I do this on my mi 5s plus but when it starts up its stuck on the MI logo....with no way to shut the phone off. I can get to fastboot or recovery mode but those dont really do anything for me as i have a locked bootloader. Im trying to flash the latest global stable rom from the miui forums. Would you be able to help me?
Click to expand...
Click to collapse
hey don't worry try same process again just replace unlockable appboot.mbn ang flash again if it say error after Bootloader flash then boot device into fastboot, use command
fastboot oem unlock-go to unlock bootloader and then flash fastboot rom via fastboot,
fastboot flash {partition name] {filename].file type
ex fastboot flash splash splash.img
fastboot flash boot boot.img
fastboot flash system system..img
flash all partitions and you are done, its work for you,

XN Logos said:
hey don't worry try same process again just replace unlockable appboot.mbn ang flash again if it say error after Bootloader flash then boot device into fastboot, use command
fastboot oem unlock-go to unlock bootloader and then flash fastboot rom via fastboot,
fastboot flash {partition name] {filename].file type
ex fastboot flash splash splash.img
fastboot flash boot boot.img
fastboot flash system system..img
flash all partitions and you are done, its work for you,
Click to expand...
Click to collapse
Thanks for the tip! i really hope this works
But a couple questions. Where do i replace unlockable appboot.mbn, and where do i get this from?
Also miFlash 2016.08.30.0 doesnt have the option to replace individual files... should i use an older version?

umirza85 said:
Thanks for the tip! i really hope this works
But a couple questions. Where do i replace unlockable appboot.mbn, and where do i get this from?
Also miFlash 2016.08.30.0 doesnt have the option to replace individual files... should i use an older version?
Click to expand...
Click to collapse
use fastbot to edl if you can't find this file on web, and then again flash Rom,

XN Logos said:
use fastboot to edl if you can't find this file on web, and then again flash Rom,
Click to expand...
Click to collapse
EDL has been removed from Global 8.0.3.0 Build, be careful if you flash it. You better have unlocked BL if you do.
And i tried everything but can not gain EDL mode.
Second info, maybe it will be useful, don't flash this version now, wait for new one this has other problems also.

I just did this with my Xiaomi Mi 5S in order to flash Chinese ROM to the new Global Stable ROM. Since I did not have Unlocked bootloader I used your method, created myself a cable and it all went just like your manual said. Helped me plenty. So I confirm the guide it is great. I am even thinking of borrowing this post to post it as a Guide how to flash Chinese ROM to Global Stable which is actually an issue since, the Chinese ROM does not support flashing via Update method, so it would require unlock. OR Depp Flash If you wont mind.

error
it shows can not read from port . what to do now?

EDL method no longer works miui8.2.3
After the update miui8.2.3 the EDL method does not work anymore, now I am stuck, please if you have solutions thanks to help me my MI5s is bocked

abdo142 said:
After the update miui8.2.3 the EDL method does not work anymore, now I am stuck, please if you have solutions thanks to help me my MI5s is bocked
Click to expand...
Click to collapse
try deep flash

Tried with DFC but stuck at can't read from port com error. Mine is running Global 8.0.3.0 MAGMIDI.

Seehank said:
I just did this with my Xiaomi Mi 5S in order to flash Chinese ROM to the new Global Stable ROM. Since I did not have Unlocked bootloader I used your method, created myself a cable and it all went just like your manual said. Helped me plenty. So I confirm the guide it is great. I am even thinking of borrowing this post to post it as a Guide how to flash Chinese ROM to Global Stable which is actually an issue since, the Chinese ROM does not support flashing via Update method, so it would require unlock. OR Depp Flash If you wont mind.
Click to expand...
Click to collapse
Hi, have similar problem-ie. locked phone and still locked bootloader-would like to try the fun with deep flash cable. I got 7.5 /not 8.0.3/ by now.
Would it work afterwards? Would I have UNLOCKED bootloader afterwards? How to do this and not bricking the phone?
cheers,

Is this method outdated?
I'm trying to flash the natrium_global_images_V8.0.4.0.MBGMIDI_20161216.0000.00_6.0_global rom however I'm stuck while it says "flashing". I have waited 15 minutes but the progress is 0.

Corrupted recovery, no o/s, what to do now?

I have a Axon 7 A2017U, bootloader unlocked. My recovery is corrupted after attempting to flash a older version of TWRP in recovery. I can no longer reboot into TWRP via recovery, it hangs at the ZTE powered by screen. I can't boot into the o/s, it too was corrupted while attempting to restore to stock using the DrakenFX's guide.
Booting into fastboot is a no go either, it just hangs at bootloader screen.
Any suggestions on where to go from here or how to fix the corrupted recovery?

You need to go into EDL mode and use MiFlash and flash a back to stock package. You can find a package here: https://androidfilehost.com/?w=files&flid=160532

Hello maybe i have same problem here. I have A2017G and maybe i have only woked unlocked bootloader. I dont think my EDL is working becouse i cant connect with ADB. Dont have any acces to recovery... i messed up step by step remember.
1. downloaded toolkit and woked fine - 2 installed drivers and working fine with EDL. 3 unlocked with no problems , 4 flashed TWRP with no problems and then i wanted to install lineage os. Downloaded last version lineage , and google apps and one file "A2017G_N_Modem.zip" and put all 3 files on my SD card. I wipe everything and then first installed modem file OK, but on second try with Lineage OS i have any errors and i just cant continue. After this i wanted to go back to original OS and i just locked my bootloader with axon toolkit and after restart i have acces only to Unlocked Bootloader. tryed everithing with axon7toolkit but nothing working. If i try to EDL mode when press volumeUP+volumeDOWN+power my phone have black screen and i thing is powered OFF.
OMFG i just typed "fastboot oem unlock" 5-6 time when i started phone to my bootloaders and now it unlocked and have acces to my TWRP.

Teet1 said:
You need to go into EDL mode and use MiFlash and flash a back to stock package. You can find a package here: https://androidfilehost.com/?w=files&flid=160532
Click to expand...
Click to collapse
Thanks, I flashed it with A2017U_B19-NOUGAT_FULL_EDL and was able to flashed twrp recovery. I was hoping the o/s would be fixed too but I get this error message as soon as o/s load "settings keeps stopping, close app". It appears it's a bad or incorrect stock file. I had to format data in TWRP recovery as the drive was encrypted. So now i'm back at square one.
Bad o/s but working recovery, so I attempted to flash these files to get back to stock but was unsuccessful. It would flash halfway and then just restarts and hung at the bootloader unlock screen.
A2017UV1.0.0B29_RollBackModded.zip
A2017UV1.1.0B32_bootstack_by_DrakenFX.zip
A2017UV1.1.0B32_StockSystem_by_DrakenFX.zip
Am I on the right track? Or should I be flashing with a different os variant?

freeb0rn said:
Hello maybe i have same problem here. I have A2017G and maybe i have only woked unlocked bootloader. I dont think my EDL is working becouse i cant connect with ADB. Dont have any acces to recovery... i messed up step by step remember.
1. downloaded toolkit and woked fine - 2 installed drivers and working fine with EDL. 3 unlocked with no problems , 4 flashed TWRP with no problems and then i wanted to install lineage os. Downloaded last version lineage , and google apps and one file "A2017G_N_Modem.zip" and put all 3 files on my SD card. I wipe everything and then first installed modem file OK, but on second try with Lineage OS i have any errors and i just cant continue. After this i wanted to go back to original OS and i just locked my bootloader with axon toolkit and after restart i have acces only to Unlocked Bootloader. tryed everithing with axon7toolkit but nothing working. If i try to EDL mode when press volumeUP+volumeDOWN+power my phone have black screen and i thing is powered OFF.
OMFG i just typed "fastboot oem unlock" 5-6 time when i started phone to my bootloaders and now it unlocked and have acces to my TWRP.
Click to expand...
Click to collapse
So you didn't read all of the hurdles and warnings about locking the bootloader with non-stock firmware?
Plus you also didn't find out about the Universal Bootloader? Did you even read the installation steps???
You had an error 7, which is that you forgot to install the Universal Bootloader. Do so this time.
EDL has nothing to do with ADB. You can access it with the phone completely off... (volume up and down, and insert usb)

QFIL to Leeco le pro 3 (Lex722)

Hello everyone!
my problem is the next: I tried install a rom of MIUI but fail in my device, after, I tried to install differents roms but nothing work, just showed me the logo Leeco and no more, no avance from the logo.
But I still had recovery with TWRP and I thinked I can install official rom 26s, It was my error.
Now follow with the same problem but now I not have recovery mode (show me recovery with logo Leeco but it instantly turns off ) and bootloader is block.
My only hope, is QFIL to recover recovery mode o any rom, Does anyone have it or tell me how to create one?..
Please anybody will can help me, I have this problem 3 days ago.
Sorry for my bad english, I am learning.
PS. I tried with post of tora33 but no work
FlashOne2.0\le_zl1_qfil_ufs\prog_ufs_firehose_8996_ddr.elf"
22:00:34: ERROR: function: rx_data:247 Error occurred while reading from COM port
22:00:34: ERROR: function: sahara_main:854 Sahara protocol error
22:00:34: ERROR: function: main:265 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
Click to expand...
Click to collapse

Are you sure you got Qualcomm drivers installed and your phone is in 9008 mode? Also try rebooting and re-enter 9008 mode. But the biggest problem that there is no qfil restoration files for x722 if I remember correctly, chances to boot with x720 ones are quite low.

Does your fastboot work volume and power down same time??
Sent from my LEX727 using xda premium
---------- Post added at 11:09 AM ---------- Previous post was at 10:53 AM ----------
worked on the phone i got off amazon. thanks!
[quote name="wpbear" post=71566961]This works on lastest USA update Stock (21s).
Have ADB/Fasboot tools on your computer
Make sure you have enabled the developer tools, turned on USB debugging, and authorized your computer on your device
Put emmc_appsboot.mbn from this zip (Download: x727-5.8.019s_bootloader-unlock.zip) in your adb directory on your PC
Put twrp.img from this zip (Download: TWRP) in your adb directory on your PC
On PC open admin CMD prompt
go into fastboot mode on phone (hold power and VOL -)
on PC type:
fastboot devices
fastboot flash aboot emmc_appsboot.mbn
after flash force reboot using Power button. It will ask for a password, just ignore it and reboot back to fastboot by forcing power down then reboot to fastboot (hold power and VOL -)
on PC type:
fastboot devices
fastboot oem unlock-go
fastboot flash recovery twrp.img
boot into twrp (force power down, then hold POWER and VOL +)
TWRP will boot, choose modify system. Choose wipe - then swipe to factory reset, when that is done - then advacned then format data
In TWRP ensure MTP is enabled. In Windows File Explorer the phone should be visibile. Drag and Drop your new ROM.zip, gapps.zip, SU.zip etc...
In TWRP INSTALL new ROM and other zips; choose wipe/dalvik/cache
If you unlock bootloader push power off until it goes off then put it back into fastboot flash twrp .img them power off again power on when phone vibrate volume down you see stock recovery then twrp.
Reboot System.
DONE![/QUOTE]
Sent from my LEX727 using xda premium

voron00 said:
Are you sure you got Qualcomm drivers installed and your phone is in 9008 mode? Also try rebooting and re-enter 9008 mode. But the biggest problem that there is no qfil restoration files for x722 if I remember correctly, chances to boot with x720 ones are quite low.
Click to expand...
Click to collapse
Yeah, that is the problem, I have the drivers and my computer recognize it, the problem, always show the error sahara.
And flash in fastboot no work because bootloader is block and not let me to do flash of anything.
Someone know how to create a qfil? I am developer and I could try but I not found tutorial how to do and I do not have it clear.

zeckAlexs said:
Yeah, that is the problem, I have the drivers and my computer recognize it, the problem, always show the error sahara.
And flash in fastboot no work because bootloader is block and not let me to do flash of anything.
Someone know how to create a qfil? I am developer and I could try but I not found tutorial how to do and I do not have it clear.
Click to expand...
Click to collapse
Every so often the same questions and the same answers.
You should read more. The X722 subforum is for something.
There is no qfil for X722, and there are no magic solutions of X720 / X727. This is an X722, it is locked and NOTHING of X720 / X727 is going to fix it.
Read this:
https://forum.xda-developers.com/le...velopment--and-mods/try-unbrick-x722-t3686191
Greetings.

How do people keep ending up with bricks? Guess I'll have to find a mod to contact them about stickying a thread about the x722 here about stock 26s. It's a bad idea. Never update your x722 to stock 26s, because your bootloader will get locked when you try to flash TWRP. The only way to get out of 26s is to flash Batyan's 01D ROM (in the x722 Development section here), and then unlock your bootloader and flash TWRP. Flashing TWRP over stock 26s will cause a permanent brick because there's absolutely no QFIL file available for this device. Even in China.

sk8223 said:
How do people keep ending up with bricks? Guess I'll have to find a mod to contact them about stickying a thread about the x722 here about stock 26s. It's a bad idea. Never update your x722 to stock 26s, because your bootloader will get locked. The only way to get out of 26s is to flash Batyan's 01D ROM (in the x722 Development section here), and then unlock your bootloader and flash TWRP. Flashing TWRP over stock 26s will cause a permanent brick because there's absolutely no QFIL file available for this device. Even in China.
Click to expand...
Click to collapse
You know I don't really know how they keep doing it but I seen a lot new ones getting this phone and not really studying how to do this stuff and their not paying attention to what model this have this a solid phone.
Sent from my LEX720 using xda premium

This is true ?
https://dc5.androidfilehost.com/dl/...40/818070582850488404/le_zl1_qfil_ufs_fix.zip

paiktaras said:
This is true ?
https://dc5.androidfilehost.com/dl/...40/818070582850488404/le_zl1_qfil_ufs_fix.zip
Click to expand...
Click to collapse
ZL1 its x720/x727 not x722, it's a fix for ppl thata not work the normal qfil rom.

I stuck on Boot Logo

I was trying to flash modified recovery image using magisk after that my phone is dead almost.
My phone don't boot in to android. I can't charge my phone because I get message on the beginning
my system is moddifyed my phone shut down automatically after 5 seconds, also i can't unlock bootloader via fastboot i get information "unlock operation is not allowed" .
I have Leeco 650x with mtk helio x27.
I only flashed modified recovery in magisk after that I disabled usb debug and oem unclock. after restart my phone I can't unlock my bootloader and I can't continue bootup to android.All I need to do is restore somehow original recovery.
But how to do that without unlocked bootloader in my situation?
I try to flash new Rome using flash tool but I have error 0xC0030003
Is here any powerful person to solve the problem.

It looks like you flashed firmware for wrong device. Settings say x650 instead of x720 (I am assuming you have x720). I think your best bet is probably the QFIL restore.
https://www.google.com/amp/s/forum....to/guide-unbrick-le-pro3-tested-t3622340/amp/
If you do not have an x720, please disregard this post.

I have 650x with mtk processor 100 procent. I only flashed modified recovery in magisk after that I disabled usb debug and oem unclock. after restart my phone I can't unlock my bootloader and I can't continue bootup to android.All I need to do is restore somehow original recovery.
But how to do that without unlocked bootloader in my situation?
I try to flash new Rome using flash tool but I have error 0xC0030003

LucasNoob said:
I have 650x with mtk processor 100 procent. I only flashed modified recovery in magisk after that I disabled usb debug and oem unclock. after restart my phone I can't unlock my bootloader and I can't continue bootup to android.All I need to do is restore somehow original recovery.
But how to do that without unlocked bootloader in my situation?
I try to flash new Rome using flash tool but I have error 0xC0030003
Click to expand...
Click to collapse
You need to find the LETV X650 Scatter file. I do not know those phones very well. A X600 file may work, you will need to do a lot of research before attempting or you can damage your partitions.
Here is a link for the firmware. https://fapgem.com/video/4tnZoa0H9Q...-firmware-eui-5925s-install-via-fastboot.html
There is a chance that if you can get your PC to see the phone that you may be able to flash the stock firmware. It will not hurt to try it. Again , read extensively before doing anything.
There is a website called Android brick. They have an article on unbricking your phone but I could not access the link. Just Google, or use DuckDuck Go and search Letv X650 Scatter file unbrick.
I just now found this, which may be your solution: https://stephaniefulke.blogspot.com/2015/09/how-to-flash-unbrick-your-mediatek.html
Good luck

HELP! I Flashed a corrupted ROM and now I can not unbrick my phone

A few days ago I bought a Xiaomi Redmi Note 7, I unlocked its bootloader successfully and installed OrangeFox Recovery Project. After that, I installed xiaomi.eu ROM EMUI 12 - Android 10, the latest version of the weekly ROMs for this phone. Since it was a beta ROM, I found some bugs, so I downloaded the stable rom with EMUI 11, but I didn't notice that the zip was corrupted so OrangeFox return an error and I made the mistake of restarting the phone. It was stuck in boot logo and when I enter into fastboot mode, the PC doesn't recognize it. Also, the phone can not enter into recovery mode, it stucks in boot logo.
I have the drivers installed because I tested with another xiaomi en fastboot mode and this one is recognized.
I don't know what to do
Sorry for my english, but I am desperate to fix it. I would really appreciate if someone could help me, please.

it's ok , try format data from orangefox and flash a different zip/rom

EgyBob said:
it's ok , try format data from orangefox and flash a different zip/rom
Click to expand...
Click to collapse
The phone can not enter into recovery mode. :/

Can you enter into fastboot with poder off bottom + volume down ?
If you can then flash a fastboot ROM with mi flash
Check out not relock bootloader
Check "flash all" option https://update.miui.com/updates/v1/fullromdownload.php?d=lavender_global&b=F&r=global&n=

its easy
just unlock bootloader again with miflash unlock then flash any rom you like

uriel cruzitho said:
Can you enter into fastboot with poder off bottom + volume down ?
If you can then flash a fastboot ROM with mi flash
Check out not relock bootloader
Check "flash all" option https://update.miui.com/updates/v1/fullromdownload.php?d=lavender_global&b=F&r=global&n=
Click to expand...
Click to collapse
The problem is that since that happened my cell phone is no longer recognized by the computer.

Phone is not recognized by the PC
My phone is connected now and it is not recognized in fastboot mode.

Dont worry, just put in the commands into fastboot. My device dont get recognized too and i can flash everything.

hi my friend.
sry for my bad english.
i had a redmi 4 prime , and had same problem.
thats get unbricked with a shoke on the phone board.
on the main board of the phone , you have 2 little steel circle and named test points and must connect their to each other .
its easy if you can open the phone. if you cant , you must going to a phone repairer.
like this video
youtu.be/7KyYp_lTR0k
i hope can help you

If your phone can still boot up. Just try to fastboot mode power+vol down. Install latest usb driver for PC. Then try one by one usb port you have on your PC. Because I experienced some usb port doesn't work. And if connected try to reinstall TWRP again.

Uses the previous version of twrp, try connecting the phone to another computer. Use xiaomi usb cable.

228as091215t said:
Dont worry, just put in the commands into fastboot. My device dont get recognized too and i can flash everything.
Click to expand...
Click to collapse
Could you explain to me how you did the Flashing using commands? please

Always you can to made test point and flash with miflash . search in google
:good:
01MaxMarvin said:
A few days ago I bought a Xiaomi Redmi Note 7, I unlocked its bootloader successfully and installed OrangeFox Recovery Project. After that, I installed xiaomi.eu ROM EMUI 12 - Android 10, the latest version of the weekly ROMs for this phone. Since it was a beta ROM, I found some bugs, so I downloaded the stable rom with EMUI 11, but I didn't notice that the zip was corrupted so OrangeFox return an error and I made the mistake of restarting the phone. It was stuck in boot logo and when I enter into fastboot mode, the PC doesn't recognize it. Also, the phone can not enter into recovery mode, it stucks in boot logo.
I have the drivers installed because I tested with another xiaomi en fastboot mode and this one is recognized.
I don't know what to do
Sorry for my english, but I am desperate to fix it. I would really appreciate if someone could help me, please.
Click to expand...
Click to collapse

01MaxMarvin said:
A few days ago I bought a Xiaomi Redmi Note 7, I unlocked its bootloader successfully and installed OrangeFox Recovery Project. After that, I installed xiaomi.eu ROM EMUI 12 - Android 10, the latest version of the weekly ROMs for this phone. Since it was a beta ROM, I found some bugs, so I downloaded the stable rom with EMUI 11, but I didn't notice that the zip was corrupted so OrangeFox return an error and I made the mistake of restarting the phone. It was stuck in boot logo and when I enter into fastboot mode, the PC doesn't recognize it. Also, the phone can not enter into recovery mode, it stucks in boot logo.
I have the drivers installed because I tested with another xiaomi en fastboot mode and this one is recognized.
I don't know what to do
Sorry for my english, but I am desperate to fix it. I would really appreciate if someone could help me, please.
Click to expand...
Click to collapse
If you can put your phone in fastboot mode it's easy, 1) download stock rom. 2 ) unzip the file 3) open it ,and copy all files 3) open the file with ( xiaomi drivers ADB ) than : paste. From the files of the ROM you'll see
" flash all " connect your phone in fastboot mode double click "flash all " and flashing process will start immediately, don't remove your phone until it stops, done.

01MaxMarvin said:
A few days ago I bought a Xiaomi Redmi Note 7, I unlocked its bootloader successfully and installed OrangeFox Recovery Project. After that, I installed xiaomi.eu ROM EMUI 12 - Android 10, the latest version of the weekly ROMs for this phone. Since it was a beta ROM, I found some bugs, so I downloaded the stable rom with EMUI 11, but I didn't notice that the zip was corrupted so OrangeFox return an error and I made the mistake of restarting the phone. It was stuck in boot logo and when I enter into fastboot mode, the PC doesn't recognize it. Also, the phone can not enter into recovery mode, it stucks in boot logo.
I have the drivers installed because I tested with another xiaomi en fastboot mode and this one is recognized.
I don't know what to do
Sorry for my english, but I am desperate to fix it. I would really appreciate if someone could help me, please.
Click to expand...
Click to collapse
01MaxMarvin said:
The problem is that since that happened my cell phone is no longer recognized by the computer.
Click to expand...
Click to collapse
Dude , Try Chinese Version on MI PC Suit. That will recognise your phone for Sure. My phone was also in same situation.
Here is the link of Chinese MI PC Suit with English Translation
miui.blog/ any-devices/china-mi-pc-suite-english-translation/ (Remove Space before 'any')
Chinese MI PC Suit has much more features then Global Version. Like Wiping Your Device , Directly Installing Stock ROM, Etc
Contact Me at +918824712945 (WhatsApp Only - If Any Help Needed)
(Try it Once)