Database Users

fastboot flashable boot.img

Hi !
I might have erased the boot partion. I still got the unlocked bootloader screen, and can still get in fastboot, but that's it. I can't boot in TWRP. I've tried to flash the boot.img from the stock zip, but it doesn't work... anyway to fix this ? It's the A2017G model. All i need is to get into TWRP.

Exnocte said:
Hi !
I might have erased the boot partion. I still got the unlocked bootloader screen, and can still get in fastboot, but that's it. I can't boot in TWRP. I've tried to flash the boot.img from the stock zip, but it doesn't work... anyway to fix this ? It's the A2017G model. All i need is to get into TWRP.
Click to expand...
Click to collapse
can't you flash recovery? I think someone made a flashable TWRP somewhere

Choose an username... said:
can't you flash recovery? I think someone made a flashable TWRP somewhere
Click to expand...
Click to collapse
I've tried to flash TWRP several time, but it won't boot...

Exnocte said:
I've tried to flash TWRP several time, but it won't boot...
Click to expand...
Click to collapse
you can try getting into EDL and using MiFlash to flash one of the zips on the Russian page 4pda. Go to the debrick page (the one with the phone carnage pictures inside), find the links for the chinese full recovery package. it will get you to the 4pda page. from there find a package that suits your needs (there is one with aboot and fbop) and flaah with MiFlash
Otherwise download the full B10 recovery package and flash it with MiFlash. you won't lose data but it might conflict if you were on Nougat

I'm in this situation for some days...
No EDL, No recovery, only fastboot and FTU modes are accessible.
And we can't flash via Miflash. It sees the phone only in fastboot mode, and can't flash it.
 @op : 2 ways to recover :
- Test points method to force EDL and flash via miflash
- Return to ZTE
If any1 has other solutions ...
FYI : My tests so far :
- Flash boot / reboot / flash recovery : Stuck on ZTE logo, red led on permanently
- Hot load recovery (fastboot boot twrp.img): Command unknown
- Format userdata/cache : No work
- Flash via Miflash in fastboot : "Can't find Eraseall except Data.bat"
- Change drivers by some others one : No luck

Sn8K said:
I'm in this situation for some days...
No EDL, No recovery, only fastboot and FTU modes are accessible.
And we can't flash via Miflash. It sees the phone only in fastboot mode, and can't flash it.
@op : 2 ways to recover :
- Test points method to force EDL and flash via miflash
- Return to ZTE
If any1 has other solutions ...
FYI : My tests so far :
- Flash boot / reboot / flash recovery : Stuck on ZTE logo, red led on permanently
- Hot load recovery (fastboot boot twrp.img): Command unknown
- Format userdata/cache : No work
- Flash via Miflash in fastboot : "Can't find Eraseall except Data.bat"
- Change drivers by some others one : No luck
Click to expand...
Click to collapse
I don't know what you mean with FTU mode, but if FTM is meant you should be able to send a "reboot edl" command to activate the EDL mode.

tron1 said:
I don't know what you mean with FTU mode, but if FTM is meant you should be able to send a "reboot edl" command to activate the EDL mode.
Click to expand...
Click to collapse
Humm ... Early morning for me ... i meant DFU. Vol+ & - while powering the phone Result on a black screen, and driver is recognized as Handset Diagnostic Driver (DFU COm port x)
Ind in that kind of brick, FTM is not accessible either.

tron1 said:
I don't know what you mean with FTU mode, but if FTM is meant you should be able to send a "reboot edl" command to activate the EDL mode.
Click to expand...
Click to collapse
Yeah that pretty much sums it up. If you get ZTE handset diagnostic driver on Ports COM&LPT you'll have to take your device apart and use the test point. If it is recognized as Qualcomm HS-USB QDLoader 9008 it means that you're on EDL. I'd reccomend trying to use miflash like i described, if it doesn't work return it or take it apart

Maybe a bit late for a reply, but I was able to get out of a similar situation (from DFU) by holding power and volume down for a long time. That got me to FTM and then I could reboot into edl via "adb reboot edl". Then I used the Axon7toolkit to flash fastboot and from there I could get to twrp and back in business. Any questions, let me know.

@Piet : How long for the PWR+DWN ? I've tried for something like 40/45 seconds, without success.

Sn8K said:
@Piet : How long for the PWR+DWN ? I've tried for something like 40/45 seconds, without success.
Click to expand...
Click to collapse
From what I read you have to let the device discharge totally, then you can get ftm. I had my battery fully charged when i bricked so i just did the 4th categ unbricking process

LeEco Le Pro 3 Elite bricked...

Hi Guys,
unfortunately I bricked my device. I tried to install the Original ROM, because before this I got the Shopping ROM from Geekbuying. First I unlocked the Bootloader and turned on USB Debugging in Developer options. All worked fine, I did everything like from the manual. TWRP workes fine, too. After I flashed the ROM it restarted and it stucks in Boot Logo (Not EUI, that before!). Showy is that it still looks like the old EUI (The words are still on chinese and not english like in 5.9.0.26S - if it is in english in this version :silly. EUI Version was 5.8.0.20S to the newest (5.9.0.26S). I only can reboot in Fastboot Mode. If I try to boot in Recovery it instant restarts. I don't know if USB-Debugging and unlock oem is still on because I did a factory reset before the flashing. Also ADB says that it couldn't unlock the bootloader (See Screen). Only in fastboot mode in can see the Device in Device Manager, also I could install the correct driver for the device (See in Screenshot).
I really hope somene can help me and thanks for all answers.

Hello
could try to download this link and try -- I see is a file from 2017-08-05 11:10
http://jingyan.baidu.com/article/618...52ff1536d.html
Requires Chinese proxy seems.
here is another version x722 android 6.1 .
Try to do it on a pc windows that do not use, because it seems to have malware the program to flash.
version stock, and root.
http://www.xianshuabao.com/rom/letv/22820.html
http://www.xianshuabao.com/course/letv/22820.html

try booting TWRP with fastboot - 'fastboot boot <path/to/twrp.img>' Although if your bootloader has got relocked the only way you'll be able to get it going is by getting the phone in EDL mode and using QFIL to flash a factory rom
You can boot to EDL from Fastboot using the modified fastboot application below.
https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292

http://www.xianshuabao.com/rom/letv/22820.html is ROM, not QFIL, there is no QFIL for X722 (elite).

evlo said:
http://www.xianshuabao.com/rom/letv/22820.html is ROM, not QFIL, there is no QFIL for X722 (elite).
Click to expand...
Click to collapse
That ROM is x720.
WAXCNFN ... => x720
WIXCNFN ... => X722
Greetings.

I also have a x722 from gearbest, when you flash a twrp on vendor 020s from geek is it working ok?
Can you then boot from rom to twrp and back to rom?

Zupy1 said:
I also have a x722 from gearbest, when you flash a twrp on vendor 020s from geek is it working ok?
Can you then boot from rom to twrp and back to rom?
Click to expand...
Click to collapse
i suggest you flash to 020S rom , it is bootloader unlock, don't update to 026S , it will bootloader lock , can not root and install twrp.

I already (long time ago) flash twrp - i dont need to flash another rom because i flash twrp over 020 from geek.

infinite boot loop.

for my unhappiness after using a rom for a short time on my handset locked and hung alone.
now the device is in infinite loop, only the logo of the leeco and restarts all the time.
recovery mode does not start, only in fastboot mode.
I tried the full rom by fastboot, tried mode any HSM with QDLoader 9008, and none worked.
Can someone help me?

it looks like my device is without bootloader, or with a different one.
How to fix this?

https://forum.xda-developers.com/showpost.php?p=73810875&postcount=226

Unfortunately, it did not work.

Thanks in advance for all those who tried to help me more
my device does not start in recovery mode, only in fastboot.
I have already performed all the procedures I knew and it was indicated here, only the logo of the leeco appears and restarts.
attempts:
1 - Here we go:
1. Download .zip containing files from Mega: https://mega.nz/#!5boxDYrL!_O-oD05yh...hV5LKwyHa39bWM
2. Extract files to path where you are able to flash them using fastboot (ie. Same folder with fastboot)
3. Boot your phone to bootloader (Vol- & Power)
4. Flash everything:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot format data <- THIS WILL WIPE YOUR PHONE INCLUDING INTERNAL STORAGE
fastboot flash cmnlib64 cmnlib64.mbn
fastboot flash ddr ddr.mbn
fastboot flash cmnlib cmnlib.mbn
fastboot flash hyp hyp.mbn
fastboot flash pmic pmic.elf
fastboot flash tz tz.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash rpm rpm.mbn
fastboot flash devcfg devcfg.mbn
fastboot flash xbl xbl.elf
fastboot flash keymaster keymaster.mbn
fastboot flash modem NON-HLOS.bin
fastboot flash dsp adspso.bin
fastboot flash bluetooth BTFM.bin
fastboot flash devinfo devinfo.bin
it was no use.
2 - official recovery flash
3 - FlashOne2.0, qfil Flash. https://forum.xda-developers.com/le-pro3/how-to/guide-unbrick-le-pro3-tested-t3622340.
4 - FlashOne2.0 fastboot.
for my little knowledge some of these procedures should work.
Is there a solution? Can someone help me where I could get help?

Try it as I did:
- Flash TWRP.img in Fastboot mode
- Restart in Recovery : power and volume +
- Once in TWRP, Connect to PC mode MTP, copy a custom ROM
- Clean with wipe and install ROM

AGE1266 said:
my device does not start in recovery mode, only in fastboot.
I have already performed all the procedures I knew and it was indicated here, only the logo of the leeco appears and restarts.
Click to expand...
Click to collapse
Do you have any solution? I had the same problem last night

So there is no recovery on the phone and you can't load a recovery on it either? Don't tell me... the bootloader locked itself? Which stock ROM version were you on? Which model---x722, x720, x727? Apparently eUI 5.9 forcibly locks the bootloader and prevents all bootloader unlocks. So if this is the case, then there's no way to unlock the bootloader, unfortunately.
Otherwise it's an internal partition issue. The internal partition is messed up and you have to rebuild it manually which is close to impossible unless you're a coder used to Linux filesystems with access to your phone's exact model's partition setup. I doubt this is the case though.
Keep trying OP. Don't give up. You might as well try everything--heck, go and post on those Chinese forums using Google Translate and you will likely get a response.

Gynlemon said:
Try it as I did:
- Flash TWRP.img in Fastboot mode
- Restart in Recovery : power and volume +
- Once in TWRP, Connect to PC mode MTP, copy a custom ROM
- Clean with wipe and install ROM
Click to expand...
Click to collapse
I've tried all methods with fastboot, including the complete rom!

thacvu said:
Do you have any solution? I had the same problem last night
Click to expand...
Click to collapse
unfortunately I have not solved anything yet, if you have any solutions please advise here!

sk8223 said:
So there is no recovery on the phone and you can't load a recovery on it either? Don't tell me... the bootloader locked itself? Which stock ROM version were you on? Which model---x722, x720, x727? Apparently eUI 5.9 forcibly locks the bootloader and prevents all bootloader unlocks. So if this is the case, then there's no way to unlock the bootloader, unfortunately.
Otherwise it's an internal partition issue. The internal partition is messed up and you have to rebuild it manually which is close to impossible unless you're a coder used to Linux filesystems with access to your phone's exact model's partition setup. I doubt this is the case though.
Keep trying OP. Don't give up. You might as well try everything--heck, go and post on those Chinese forums using Google Translate and you will likely get a response.
Click to expand...
Click to collapse
is X720 and was using the 18S version, I installed the Rom JUI 15-09-17 for X720 modified by Bahuy2003, after 2 days after using the device it froze and had to restart the force, but after that it never worked again!

use flashone 2.0 method
AGE1266 said:
is X720 and was using the 18S version, I installed the Rom JUI 15-09-17 for X720 modified by Bahuy2003, after 2 days after using the device it froze and had to restart the force, but after that it never worked again!
Click to expand...
Click to collapse
google flashone restore for your phone.

Ab20000 said:
google flashone restore for your phone.
Click to expand...
Click to collapse
believe me if you want, I've spent more than once FlashOne2.0 and still not solve! worst of all is that there is no one with the same status as me, that is impossible. Would someone buy my device to take advantage of?

my leeco le 3 pro restarted alone after installation of Rom JUI, is in infinite bootloop, but the device is very new and little time purchased, can anyone tell me how can I sell it to someone else to enjoy the components?

r u using real pro3 files or not?
---------- Post added at 04:21 PM ---------- Previous post was at 04:20 PM ----------
AGE1266 said:
believe me if you want, I've spent more than once FlashOne2.0 and still not solve! worst of all is that there is no one with the same status as me, that is impossible. Would someone buy my device to take advantage of?
Click to expand...
Click to collapse
AGE1266 said:
my leeco le 3 pro restarted alone after installation of Rom JUI, is in infinite bootloop, but the device is very new and little time purchased, can anyone tell me how can I sell it to someone else to enjoy the components?
Click to expand...
Click to collapse
r u using real pro3 files or not? this method even fixes phones which are dead. u need to reinstall drivers or do this on some other pc.

I had the same problem like AGE1266, but I installed OmniRom + Blackscreen 3.6 kernel. It worked well for 2-3 days, and suddenly it restarted and restarted several times but not successfully. It can't boot to recovery too. I've flashed with FlashOne2.0, everything seems fine, but it still can't boot. Does anyone have solution for that case? Thank you (and sorry for my English).

Too many problems with le pro 3 and its versions :/

I have the same problem as bootloop, when boot to logo then reboot, when boot to recovery then rebootม even though install twrp in fastboot mode(fastboot mode just find).
I found this as similar problem.
If we found the kernel that can turn off big-core or similar, may be we can solve the problem, but we cant. T-T

First thing what is your model you have?
Sent from my LEX727 using xda premium
http://forum.xda-developers.com/showthread.php?p=69627992
Go here if you 727 you can try but if you read all before trying it.

AGE1266 said:
for my unhappiness after using a rom for a short time on my handset locked and hung alone.
now the device is in infinite loop, only the logo of the leeco and restarts all the time.
recovery mode does not start, only in fastboot mode.
I tried the full rom by fastboot, tried mode any HSM with QDLoader 9008, and none worked.
Can someone help me?
Click to expand...
Click to collapse
and Now I have the same problem
I think its hardware related so :crying:

Axon 7 A2017 problem

Hi, i'm domenico, i read everyday your forum from italy. I decided to write here becouse i don't know how to solve this damage.
I have the same problem reported here
https://forum.xda-developers.com/axon-7/help/signal-update-a2017gv1-2-0b02-t3602415
I read around that is needed to do a backup of modem and other file but i dont and now i can't use a sim card it says no network connection and when i try to call tell me airplane mode on.
Anyone please know if there is something i can do? i tried to run fastbot for use miflash and restore the original image but it doesn't work can't go in EDL mode

AmilDK said:
Hi, i'm domenico, i read everyday your forum from italy. I decided to write here becouse i don't know how to solve this damage.
I have the same problem reported here
https://forum.xda-developers.com/axon-7/help/signal-update-a2017gv1-2-0b02-t3602415
I read around that is needed to do a backup of modem and other file but i dont and now i can't use a sim card it says no network connection and when i try to call tell me airplane mode on.
Anyone please know if there is something i can do? i tried to run fastbot for use miflash and restore the original image but it doesn't work can't go in EDL mode
Click to expand...
Click to collapse
Flash universal bootloader and the modem for A2017 from the lineage os thread. Then you should get radio signal again.

I don't know how to do It Can you give me more information please?

AmilDK said:
I don't know how to do It Can you give me more information please?
Click to expand...
Click to collapse
Is your bootloader unlocked? Do you have TWRP? If you do, go to the LineageOS thread (located over 'ROMs, Kernels, Recoveries') and download the 'A2017X Universal Bootloader' and 'A2017 Modem' from there (there should be a link to androidfilehost where the universal bootloader and modem files are located). Be sure that you download the A2017 modem file (NOT the A2017G or A2017U one!).
After that simply put them on your phone and flash them via TWRP

Choose an username... said:
Is your bootloader unlocked? Do you have TWRP? If you do, go to the LineageOS thread (located over 'ROMs, Kernels, Recoveries') and download the 'A2017X Universal Bootloader' and 'A2017 Modem' from there (there should be a link to androidfilehost where the universal bootloader and modem files are located). Be sure that you download the A2017 modem file (NOT the A2017G or A2017U one!).
After that simply put them on your phone and flash them via TWRP
Click to expand...
Click to collapse
Thx for the help, i do not have bootloader unlocked and not have TWRP.

I've installed TWRP but when i try to enter in recovery (Power + volume up) nothing happen. Just blackscreen

AmilDK said:
I've installed TWRP but when i try to enter in recovery (Power + volume up) nothing happen. Just blackscreen
Click to expand...
Click to collapse
What version did you install? 3.1.1-0?

Followed a guide and with minimal fastboot and adb tool put in the phone the 3.0.4-0-ailsa_ii.img successful After that can't go on with steps and if try to open recovery nothing happen

Install Stock ROM from EDL with MiFlash.

WesTD said:
Install Stock ROM from EDL with MiFlash.
Click to expand...
Click to collapse
i tried with twrp 3.1.1.0 same can't access to recovery
miflash doesn't recognise my phone in edl

AmilDK said:
i tried with twrp 3.1.1.0 same can't access to recovery
miflash doesn't recognise my phone in edl
Click to expand...
Click to collapse
Is your phone on edl mode?

Yes i think had a problem with drivers. I out the phone in edl from cmd with adb then opened miflash but can't see the device

AmilDK said:
Yes i think had a problem with drivers. I out the phone in edl from cmd with adb then opened miflash but can't see the device
Click to expand...
Click to collapse
Try 'adb reboot recovery' from cmd

I don't know where i miss, i tried with adb and axon 7 tool, adb edl reboot, axon7tool axon7tool -r gpt boot recovery*, then axon7tool -w recovery, with twrp-3.1.1-0-ailsa_ii.img renamed in recovery bin, but from here nothing happen, i can't go in recovery if i try nothing happen black screen if i put the old recovery.bin can reboot in recovery but can't flash modem file or unlock bootloader. Tried with miflash but nothing happen give me error "cannot receave the hello packet"
PS my buil now is ZTE A2017GV1.2.0B04, the original one was ZTE_A2017V1.0.0B15
Choose an username... said:
What version did you install? 3.1.1-0?
Click to expand...
Click to collapse
i found a post with exactly my situation
https://forum.xda-developers.com/axon-7/help/sim-airplane-offbut-turnd-t3698325
perchance have you the file you talk in this post https://forum.xda-developers.com/showpost.php?p=74386034&postcount=24

i don't know how, but i did it.. with axon7toolkit, restored original rom, then updated to V.2.0.0B13, now works good

[guide] how to fix totally dead redmi note 4 | stuck in bootloop | qfil flashing

Hello everyone, in today's guide I will tell you all how to fix bootloop problem in Redmi note 4
NOTE: THIS FIX IS FOR THOSE WHOSE PROBLEM DIDN'T GET FIXED EVEN AFTER FLASHING WITH MIFLASH
QFIL is a tool which is used to flash stock firmwares in Qualcomm smartphones.
Prerequisites:
1)Bricked Redmi note 4 (lol I guess you have that already if you are reading this)
2) Working USB cable (You really dont want yourself smashing your head and then finding out faulty cable)
3) QPST Version 2.7.438.3 (Google it)
4) Unlocked bootloader
5) Platform Tools (For passing OEM EDL command)
6) Stock fastboot MIUI ROM (IMPORTANT: Use V8.1.10.0.MCFMIDI from here: http://bigota.d.miui.com/V8.1.10.0....DI_20161228.0000.00_6.0_global_7557bfe334.tgz)
7)QDLoader HS-USB Driver for Redmi Note 4X
Note: I'm not responsible if you mess up your device the mentioned process helped me and others in fixing our devices. You yourself are responsible!
Steps:
1) Open QFIL tool from C:\Program Files\Qualcomm\QPST\bin or wherever you installed it. Run as administrator!
Note: Don't use older version QPST, because you will get an error message when writing userdata section.
2) In QFIL choose Flat Build option.
3) Make sure you you have extracted the above ROM file onto desktop
4) In QFIL tool browse and locate .mbn file
(Named like: prog_emmc_firehose_8953_ddr.mbn)
5) Click on Load XML and select rawprogram0.xml and patch0.xml inside your Fastboot ROM folder.
6) Now turn off your phone and enter Fastboot mode by pressing ans holding power button+vol down button. After that open platform tools folder downloaded above and right click opening cmd in that folder and write following command:
fastboot oem edl
And hit enter (The above command does require your bootloader to be unlocked so kindly keep that in mind before passing the command)
7) Your phone will exit Fastboot mode and red led will start blinking and your phone will be detected as COM port in QFIL tool.
8) At last hit download button, if you did everything right process should begin and end saying download complete.
9) You can now remove your phone and keep holding power button till it boots up. First boot will take some time.
Optional step 10) If you loose your IMEI in flashing process then you can flash your IMEI using Qualcomm IMEI tool (If you face problem in this then comment and i will come up with another guide regarding IMEI flashing)
Hope it helps, if yes be sure you hit that thumbs up button it gives me good feeling lol ?
Reply if you face any problem
Peace!

addymishra said:
Hello everyone, in today's guide I will tell you all how to fix bootloop problem in Redmi note 4
NOTE: THIS FIX IS FOR THOSE WHOSE PROBLEM DIDN'T GET FIXED EVEN AFTER FLASHING WITH MIFLASH
QFIL is a tool which is used to flash stock firmwares in Qualcomm smartphones.
Prerequisites:
1)Bricked Redmi note 4 (lol I guess you have that already if you are reading this)
2) Working USB cable (You really dont want yourself smashing your head and then finding out faulty cable)
3) QPST Version 2.7.438.3 (Google it)
4) Unlocked bootloader
5) Platform Tools (For passing OEM EDL command)
6) Stock fastboot MIUI ROM (IMPORTANT: Use V8.1.10.0.MCFMIDI from here: http://bigota.d.miui.com/V8.1.10.0....DI_20161228.0000.00_6.0_global_7557bfe334.tgz)
7)QDLoader HS-USB Driver for Redmi Note 4X
Note: I'm not responsible if you mess up your device the mentioned process helped me and others in fixing our devices. You yourself are responsible!
Steps:
1) Open QFIL tool from C:\Program Files\Qualcomm\QPST\bin or wherever you installed it. Run as administrator!
Note: Don't use older version QPST, because you will get an error message when writing userdata section.
2) In QFIL choose Flat Build option.
3) Make sure you you have extracted the above ROM file onto desktop
4) In QFIL tool browse and locate .mbn file
(Named like: prog_emmc_firehose_8953_ddr.mbn)
5) Click on Load XML and select rawprogram0.xml and patch0.xml inside your Fastboot ROM folder.
6) Now turn off your phone and enter Fastboot mode by pressing ans holding power button+vol down button. After that open platform tools folder downloaded above and right click opening cmd in that folder and write following command:
fastboot oem edl
And hit enter
7) Your phone will exit Fastboot mode and red led will start blinking and your phone will be detected as COM port in QFIL tool.
8) At last hit download button, if you did everything right process should begin and end saying download complete.
9) You can now remove your phone and keep holding power button till it boots up. First boot will take some time.
Optional step 10) If you loose your IMEI in flashing process then you can flash your IMEI using Qualcomm IMEI tool (If you face problem in this then comment and i will come up with another guide regarding IMEI flashing)
Hope it helps, if yes be sure you hit that thumbs up button it gives me good feeling lol
Reply if you face any problem
Peace!
Click to expand...
Click to collapse
Hi,
after your manual, download success, the device restarts, but it then gets stuck with the MI logo?
What can I do?
sieg

sieg01 said:
Hi,
after your manual, download success, the device restarts, but it then gets stuck with the MI logo?
What can I do?
sieg
Click to expand...
Click to collapse
Hello there,
First of all make sure that you are flashing the fastboot rom which I mentioned in the thread.
Now coming to your problem, open QFIL tool and open configuration panel. You will see many options, check for 'Erase before Download' option and make sure its unchecked then try flashing again. If the problem persist then send me screenshot of QFIL tool along with configuration.
All the best!

addymishra said:
Hello there,
First of all make sure that you are flashing the fastboot rom which I mentioned in the thread.
Now coming to your problem, open QFIL tool and open configuration panel. You will see many options, check for 'Erase before Download' option and make sure its unchecked then try flashing again. If the problem persist then send me screenshot of QFIL tool along with configuration.
All the best!
Click to expand...
Click to collapse
Hi again,
I have flashed again and in the " download configuration " I set " Erase before Download", please see the Attachment, unfortunately the same device restarts, but it then gets stuck with the MI logo?

sieg01 said:
Hi again,
I have flashed again and in the " download configuration " I set " Erase before Download", please see the Attachment, unfortunately the same device restarts, but it then gets stuck with the MI logo?
Click to expand...
Click to collapse
Dear, you DON'T NEED TO SELECT "ERASE BEFORE DOWNLOAD" !!! Now listen carefully what to do-:
1) Download mi flash tool and mi unlock tool
2) Your bootloader must be locked now so unlock it with mi unlock (Don't worry just use your mi account it will unlock successfully)
3) Once unlocked flash the fastboot rom in fastboot mode using mi flash tool. IMPORTANT: MAKE SURE YOU SELECT "CLEAN ALL" OPTION
4) Now when flashed your device will restart. Dont let it boot up. Press and hold power+volume down button till you enter into fastboot
5) From fastboot enter EDL mode using "fastboot oem edl" command. Red light will blink
6) Open QFIL and make sure "Erase before download" IS *NOT* SELECTED
7)Click download and you should be good to go
All the best

addymishra said:
Dear, you DON'T NEED TO SELECT "ERASE BEFORE DOWNLOAD" !!! Now listen carefully what to do-:
1) Download mi flash tool and mi unlock tool
2) Your bootloader must be locked now so unlock it with mi unlock (Don't worry just use your mi account it will unlock successfully)
3) Once unlocked flash the fastboot rom in fastboot mode using mi flash tool. IMPORTANT: MAKE SURE YOU SELECT "CLEAN ALL" OPTION
4) Now when flashed your device will restart. Dont let it boot up. Press and hold power+volume down button till you enter into fastboot
5) From fastboot enter EDL mode using "fastboot oem edl" command. Red light will blink
6) Open QFIL and make sure "Erase before download" IS *NOT* SELECTED
7)Click download and you should be good to go
All the best
Click to expand...
Click to collapse
1. My redmi is unlocked ( from Xiaomi )
2. MI flash tool don`t work, because I get error: can not found file flash_all.bat, so I dont`t use this tool

sieg01 said:
1. My redmi is unlocked ( from Xiaomi )
2. MI flash tool don`t work, because I get error: can not found file flash_all.bat, so I dont`t use this tool
Click to expand...
Click to collapse
In order to use mi flash correctly kindly place the fastboot rom in C: drive root directory then try flashing, it will work. Its a bug of mi flash

Hi I followed your all 9 steps in the first post. However, me too is stuck in 'mi' logo nothing happens waiting after 10 minutes
Then I followed the following steps, flashed by mi tool followed by QFIL. But my QFIL didn't have "ERASE BEFORE DOWNLOAD" option. I downloaded the exact QPST version 2.7.438.3 from gsmhosting forum.
Still the phone boots and stuck with 'mi' logo forever. I have tried flashing other ROMs like RR, lineageOS from TWRP but each of the ROM is stuck while booting . Only miuiPro "miuipro_v7.0_mido_v9.2.1.0_NCFCNEK.zip" manages to boot but keeps rebooting after every 2-3 seconds. My phone has been useless for 3 long days.
addymishra said:
Dear, you DON'T NEED TO SELECT "ERASE BEFORE DOWNLOAD" !!! Now listen carefully what to do-:
1) Download mi flash tool and mi unlock tool
2) Your bootloader must be locked now so unlock it with mi unlock (Don't worry just use your mi account it will unlock successfully)
3) Once unlocked flash the fastboot rom in fastboot mode using mi flash tool. IMPORTANT: MAKE SURE YOU SELECT "CLEAN ALL" OPTION
4) Now when flashed your device will restart. Dont let it boot up. Press and hold power+volume down button till you enter into fastboot
5) From fastboot enter EDL mode using "fastboot oem edl" command. Red light will blink
6) Open QFIL and make sure "Erase before download" IS *NOT* SELECTED
7)Click download and you should be good to go
All the best
Click to expand...
Click to collapse

biits1993 said:
Hi I followed your all 9 steps in the first post. However, me too is stuck in 'mi' logo nothing happens waiting after 10 minutes
Then I followed the following steps, flashed by mi tool followed by QFIL. But my QFIL didn't have "ERASE BEFORE DOWNLOAD" option. I downloaded the exact QPST version 2.7.438.3 from gsmhosting forum.
Still the phone boots and stuck with 'mi' logo forever. I have tried flashing other ROMs like RR, lineageOS from TWRP but each of the ROM is stuck while booting . Only miuiPro "miuipro_v7.0_mido_v9.2.1.0_NCFCNEK.zip" manages to boot but keeps rebooting after every 2-3 seconds. My phone has been useless for 3 long days.
Click to expand...
Click to collapse
Try downloading the lastest version from here:
https://androidmtk.com/download-qpst-flash-tool
Erase before download must be unchecked
And remember first boot does take some time so be patient a little. Hope it works!

addymishra said:
Try downloading the lastest version from here:
https://androidmtk.com/download-qpst-flash-tool
Erase before download must be unchecked
And remember first boot does take some time so be patient a little. Hope it works!
Click to expand...
Click to collapse
Hi, Thank you very much, I managed to boot the ROM using QFil , however in setup wizard I can't get past the getting device security info in mi account setup. Besides, dialogues for lots "app stopped working" keeps coming. and also there are frequent reboots

addymishra said:
In order to use mi flash correctly kindly place the fastboot rom in C: drive root directory then try flashing, it will work. Its a bug of mi flash
Click to expand...
Click to collapse
Hi,
II managed to flash successfully with MIflash tool, but after switching it on
do I have permanent boot loop with MI logo? Andere Fastboot ROM`s will MIflash nicht machen. Please look my Screenshot.
Greating

biits1993 said:
Hi, Thank you very much, I managed to boot the ROM using QFil , however in setup wizard I can't get past the getting device security info in mi account setup. Besides, dialogues for lots "app stopped working" keeps coming. and also there are frequent reboots
Click to expand...
Click to collapse
Strange :/ you can try miflash tool for that case. Download the lastest mi flash tool, enter into EDL mode using "fastboot oem edl" command then in mi flash drop down menu in left corner select "flash_factory.bat" and click flash. It will take around 400 seconds. Make sure you are in edl mode with red blinking light otherwise it will wipe your IMEI. Hope it works!

sieg01 said:
Hi,
II managed to flash successfully with MIflash tool, but after switching it on
do I have permanent boot loop with MI logo? Andere Fastboot ROM`s will MIflash nicht machen. Please look my Screenshot.
Greating
Click to expand...
Click to collapse
Are you able to enter into setup wizard? If not then try the procedure I posted above using factory flash. After flashing with mi flash once again try flashing with QFIL. It's sometimes hit or miss :/

addymishra said:
Are you able to enter into setup wizard? If not then try the procedure I posted above using factory flash. After flashing with mi flash once again try flashing with QFIL. It's sometimes hit or miss :/
Click to expand...
Click to collapse
Hi,
I don`t able to enter into setup wizard, because boot-loop, so I done following:
1. mi flash factory flash-successfully
2. mi flash flash once again-successfully
3. flashing with QFIL- successfully
After switch-on again boot loop every 22 seconds with mi-logo
Do you have any more tips for me?
Greating
sieg

sieg01 said:
Hi,
I don`t able to enter into setup wizard, because boot-loop, so I done following:
1. mi flash factory flash-successfully
2. mi flash flash once again-successfully
3. flashing with QFIL- successfully
After switch-on again boot loop every 22 seconds with mi-logo
Do you have any more tips for me?
Greating
sieg
Click to expand...
Click to collapse
Man, I think its some sort of hardware issue then. Or maybe your messed up your blobs or your partitions real bad and corrupted them. QFIL helped in my case. Got no more tips, maybe its time to visit service center brother One last shot you can give is to try flashing with QFIL first then with Mi Flash. That's last hope! All the best!

flash failed in QFIL please help

sohanaw said:
flash failed in QFIL please help
Click to expand...
Click to collapse
Which version of QFIL and which ROM are you flashing with? I managed to flash the said version in OP through QFIL without any error. However, other official versions like 9.xx fail to be flashed by QFIL

A solution that worked after all these troubles
Hi everyone,
This post is for those who are still struggling with 'cool' bootloop in Redmi note 4x irrespective of stock, custom ROMS, you are flashing.
Before all these steps I flashed "mido_global_images_V8.1.10.0.MCFMIDI_20161228.0000.00_6.0_global_7557bfe334.tgz" using QFIL first, then miFlash tool. I was greeted by "can't decrypt phone".
Refer to the OP
Then I flashed lazy_flasher and managed to boot into the stock ROM but couldn't get past the Mi account setup. Even my Keyboard app keeps stopping, so annoying.
The the below Steps I followed redeemed me of this agony powered by xiaomi:
1. Downloaded this firmware==>"global-mido-firmware-7.12.14.zip"
Mokee ROM==>"MK71.2-mido-201803080920-NIGHTLY"
open gapps arm-64, 7.1, pico
open gapps arm-64, 7.1, nano [BOTH] from gapps
2. flashed TWRP=3.1.1-0[official version] from the xda
Code:
fastboot flash recovery [name_of_recovery_image_of_twrp]
3. Entered into Recovery==>WIPE=>Advanced WIPE=> select all partitions==>WIPE[can leave Internal storage unchecked]
4. Then Format Data==>yes
5. Copied firmware, Mokee ROM, pico and nano gapps [4 items] to internal storage
6. Flashed downloaded firmware, then MOKEE ROM, then gapps-nano
7. Reboot to recovery
8. After entering Recovery, Reboot to system
Hopefully we will see mi logo, then Mokee robot animating soon enough. It will take you to setup wizard within 5-10 minutes, If you see any Google apps [Gboard in my case] stopping,
it may mean that google Play services were not installed properly[Don't know why]. In my case I couldn't set up Google account/framework first time. If it happens, go to settings,
enable developer options tapping BUILD version==>then enable USB debugging.
Then reboot to Recovery
Flash gapps-pico.
Do factory reset from Recovery, simple wipe.
Then reboot to System.[DON'T install TWRP as system app etc]
For me, this time I was able to setup google account from the setup wizard. Google service framework has been working without any issues. [ Again Don't know why]
This time I have been able to install my desired apps from playstore
Few more words:
Firstly, I tried flashing only pico, but I couldn't set up the google account, no matter how many times I reboot to recovery, wipe Dalvik-cache etc, then flash pico.
I described exactly what I did that worked out for me. There could be many possible orders, combinations, but I don't have time for that.
I tried to flash Alexy's "RR-N-v5.8.5-20180121mido_alexy.zip" ROM in combination with this firmware but it just will hang TWRP while flashing. only this MOKEE ROM worked with this firmware for me.
I wasted full 3 days for fixing this device. And no intention to tinker with it anymore, my communication has been in a mess!.
While in stock MIUI 'google *apps keeps stopping" just annoyed me as hell, so decided to switch, and after 3 days of disgusting 'Waiting period for bootloader UNLOCK' I couldn't even install a working stock
MIUI ROM now, maybe cheap hardware issue offered by Xiaomi. They have just made everything complex. This is my first and last device from them. My previous Moto G3 was amazing and would be with me had it not been stolen
Will be happy to help regarding this issue, and thank you the OP of this thread, who helped me realize that this device is still able to boot.
Wishing everyone in this note 4x trouble good luck!!

biits1993 said:
Hi everyone,
This post is for those who are still struggling with 'cool' bootloop in Redmi note 4x irrespective of stock, custom ROMS, you are flashing.
Before all these steps I flashed "mido_global_images_V8.1.10.0.MCFMIDI_20161228.0000.00_6.0_global_7557bfe334.tgz" using QFIL first, then miFlash tool. I was greeted by "can't decrypt phone".
Refer to the OP
Then I flashed lazy_flasher and managed to boot into the stock ROM but couldn't get past the Mi account setup. Even my Keyboard app keeps stopping, so annoying.
The the below Steps I followed redeemed me of this agony powered by xiaomi:
1. Downloaded this firmware==>"global-mido-firmware-7.12.14.zip"
Mokee ROM==>"MK71.2-mido-201803080920-NIGHTLY"
open gapps arm-64, 7.1, pico
open gapps arm-64, 7.1, nano [BOTH] from gapps
2. flashed TWRP=3.1.1-0[official version] from the xda
Code:
fastboot flash recovery [name_of_recovery_image_of_twrp]
3. Entered into Recovery==>WIPE=>Advanced WIPE=> select all partitions==>WIPE[can leave Internal storage unchecked]
4. Then Format Data==>yes
5. Copied firmware, Mokee ROM, pico and nano gapps [4 items] to internal storage
6. Flashed downloaded firmware, then MOKEE ROM, then gapps-nano
7. Reboot to recovery
8. After entering Recovery, Reboot to system
Hopefully we will see mi logo, then Mokee robot animating soon enough. It will take you to setup wizard within 5-10 minutes, If you see any Google apps [Gboard in my case] stopping,
it may mean that google Play services were not installed properly[Don't know why]. In my case I couldn't set up Google account/framework first time. If it happens, go to settings,
enable developer options tapping BUILD version==>then enable USB debugging.
Then reboot to Recovery
Flash gapps-pico.
Do factory reset from Recovery, simple wipe.
Then reboot to System.[DON'T install TWRP as system app etc]
For me, this time I was able to setup google account from the setup wizard. Google service framework has been working without any issues. [ Again Don't know why]
This time I have been able to install my desired apps from playstore
Few more words:
Firstly, I tried flashing only pico, but I couldn't set up the google account, no matter how many times I reboot to recovery, wipe Dalvik-cache etc, then flash pico.
I described exactly what I did that worked out for me. There could be many possible orders, combinations, but I don't have time for that.
I tried to flash Alexy's "RR-N-v5.8.5-20180121mido_alexy.zip" ROM in combination with this firmware but it just will hang TWRP while flashing. only this MOKEE ROM worked with this firmware for me.
I wasted full 3 days for fixing this device. And no intention to tinker with it anymore, my communication has been in a mess!.
While in stock MIUI 'google *apps keeps stopping" just annoyed me as hell, so decided to switch, and after 3 days of disgusting 'Waiting period for bootloader UNLOCK' I couldn't even install a working stock
MIUI ROM now, maybe cheap hardware issue offered by Xiaomi. They have just made everything complex. This is my first and last device from them. My previous Moto G3 was amazing and would be with me had it not been stolen
Will be happy to help regarding this issue, and thank you the OP of this thread, who helped me realize that this device is still able to boot.
Wishing everyone in this note 4x trouble good luck!!
Click to expand...
Click to collapse
will try this tonight, thanks bhai

sohanaw said:
will try this tonight, thanks bhai
Click to expand...
Click to collapse
Let me know bro what happens, hope it works for you
I wanted to use RR rom though, but in the end no ROM worked for me except this one. So I'm just happy with it.