Stuck on the download not ... I tried everything but it always comes back in download do not run ... but without the writing in the upper left in Odin mode Thanks for the suggestions
if i use odin i get stuck here without moving forward
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1401)..
<ID:0/008> File analysis..
<ID:0/008> Total Binary size: 2902 M
<ID:0/008> SetupConnection..
Related
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
that happened twice while trying to flash stock nougat firmware after some buggy custom roms.
smart switch from samsung for drivers on windows 10 installed, com 4 connected, whenever i try to flash the 4 parted firmware (cl, bl, ap,csc) it gives me a fail after some time with log above.
thanks for any help how to get back to stock
device wants me to use emergency recovery from smart switch but end of month small bandwith left i would have liked to prevent downloading another 4gb through smart switch as i have the nougat stock files on hdd.
thanks!
I installed twrp, it worked fine other than data mount thing, tried to reinstall twrp but doing something different to try and get around the data mount, still no data mount, but twrp installed fine and my phone booted like normal except nothing from google would work, couldn't even add an account, it would just go to a black screen
So tried wiping dalvik and cache (found the data mount fix) that didnt work so figured at least try and flash a new rom as it seems to be an issue with my rom, well I tried flashing a rom, it said it installed correctly in the set up but then it sat for over 10 minutes on the black samsung galaxy s8 screen
So figuring it wasnt working I decided to try and flash stock rom, I downloaded it, followed the Odin guide, do I only need to flash the AP file?
This is Odin's log
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img.lz4
And it just sits there, right now at 20+ minutes, no indication that anything is being done on phone of within odin
Any help you can offer?
Im on latest 2CRED May firmware and downloaded the right file for that from updato (sammobile is too slow to wait on those downloads)
Should I just suck it up and download from sammobile?
Thanks
Well I figured I needed to flash all four things and that seems to have helped some, but now its stuck at Set Partition
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin.lz4
NVM Im an idiot, I wasnt on the most recent odin
Hello guys.
So yesterday i tried to root my chinese qualcomm variant of s7 edge with the help of this site https://www.the***********.com/root-qualcomm-galaxy-s7-edge-nougat/ ..
I enabled usb debugging, enabled oem unlock, unlocked bootloader with the help of the link i found in xda ,set up samsung drivers and adb in my pc and proceeded with the steps mentioned..
i flashed the .tar file and it did succeed but after it rebooted i got stuck in the samsung logo
... it showed warranty bit : kernel on the top left
After that i panicked and searched up xda and stubled upon this thread https://forum.xda-developers.com/s7-edge/help/s7edge-g9350-qualcomm-english-hk-rom-t3429535
I did all the mentioned steps but it showed failed in odin
then i tried to install https://www.teamandroid.com/2018/07...0-china-galaxy-s7-edge-g9350-oreo-firmware/2/ but to no avail
after this i got this in odin
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4948 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
....
And now it is stuck in a boot loop i can only access the download mode.. i cannot go to recovery mode at all
every time i press the power button or try to go to recovery mode it says recovery booting , set warranty: recovery and then disappears within a second
Is my device hard bricked ? Please help me I really dont know what to do next .. thanks in advance
DOES UR ISSUE RESOLVED
Hello everyone, today i wanted to try the new lineage rom for android 9 on my SM-G900M
But while i was backuping my files, i had a problem with WhatsApp, it was basically filling my entire internal memory space, so i had to move this for external sd card to be able to create and upload the backup file to Google Drive.
So i rooted my phone and installed Foldermount, created the link and it was moving my whatsapp files and when it was 16% of the progress bar, my cellphone just rebooted and didn't get back to the OS on the normal time it used to, i had a very long loading screen and when i finally could access my phone it worked for 10~20secs only and rebooted again.
I've tried to hard reset but when i bootup the phone, i have the green screen of reset and when it hits the last stage, the "installing apps" one, and the installing apps bar get near the end, the cellphone just restart like before and get into a very long loading screen.
When i try to upload a rom from Sammobile i got stuck on <ID:0/004> aboot.mbn
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
And when i try to upload a full repair rom with " BL / AP / CP / CSC " i got stuck in <ID:0/004> DO NOT TURN OFF TARGET!! (With Set Partition)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
Any one could help me getting my S5 back to life? :/
Thx if you spent your time reading this all <3
I'm not sure about what i've done to solve this but i could upload the room after changing Cabble/usbport and Ignoring CSC, useing PIT and flaging NAND ERASE on ODIN 3.13.1
Now I have this problem with my galaxy s8 SMG950FD
When it tryes to turn on it gets the following message: "Custom binnary blocked by FAP Lock."
I can't go in the TWRP, It just turn on with thee menssage above every time.
When I tryed Entering the Download mode to flash the original ROM, it enters, but when I upload the files and press start, Odin show a "FAIL!"
Odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> param.bin
<ID:0/006> userdata.img
<ID:0/006> Home Binary Download
<ID:0/006> Total Binary size: 4162 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> up_param.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And apear the flowing message on the phone: SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 6, BINARY:5
I'm stuck, someone please help me!!
Sasuke1013 said:
Now I have this problem with my galaxy s8 SMG950FD
When it tryes to turn on it gets the following message: "Custom binnary blocked by FAP Lock."
I can't go in the TWRP, It just turn on with thee menssage above every time.
When I tryed Entering the Download mode to flash the original ROM, it enters, but when I upload the files and press start, Odin show a "FAIL!"
Odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> param.bin
<ID:0/006> userdata.img
<ID:0/006> Home Binary Download
<ID:0/006> Total Binary size: 4162 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> up_param.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And apear the flowing message on the phone: SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 6, BINARY:5
I'm stuck, someone please help me!!
Click to expand...
Click to collapse
Your flashing a firmware with an older bootloader! Device 6 binary 5. Flash the latest firmware, one with U6 bootloader and it will work