I have a 9" YT9213A running YT9213A_00009_V001_20200810
It says it's Android 10 but it's obviously fake
It has the usual bug where balance and fader don't work (and I don't care).
RDS used to work perfectly out of the box.
Then, playing around in the factory settings, I changed the radio setting from "FM inside" to "auto match". I know, I know, that was stupid of me. I just wanted to see if I could just disable the radio somehow.
Anyway. I lost sound from the radio and from ALL apps. The radio was completely mute.
I tried to go back to "FM inside" and to the other option (NXP6851) but no change. Of course I rebooted after every change.
In all this, the RDS function continued to work perfectly with all radio settings - only the sound was missing.
Wanting to get back sound I went for a factory reset from the android settings. I didn't have a backup because I thought I didn't have anything worth backing up. After the backup, the radio seemed exactly like when it was new.
After the factory reset (and a key off / key on cycle) I finally had sound back, from all apps.
But now no RDS .
Oddly enough, changing the "radio setting" option seems to have no impact whatsoever on sound or on RDS function.
I'd like to get back the RDS working again. Any ideas?
Related
I posted this in the BT thread, but no response. Maybe this will do. Hope someone can help me out
I read the same in a couple of posts for the new BT stack: I got the patch, installed it, request comes where to install, tried several places, nothing seems to happend (also after reset).
Also, sound is gone now. No ringtone, voice and music playback. There was a thead that discussed the same problem, but no solution other than hard-reset.
bt stack: BCHS_FOR_POCKET_PC_OZONE[1].ARMV4
I got the 1.13WWE/1.12R ROMs
tanx!!
Backup?
What about backups? the author recomended to backup your ppc bevor trying. I did so and was happy about that! This Stack did not work on my magician. nothing changes except the mentioned problems appeared...
But regarding your Question: I think there are two ways of getting rid of this porblem:
1) Hard Reset
2) Install a backup
I know this is not the answer you hoped to receive...but it is what i encountert :evil:
backups? what's that? :lol:
Yeah, I know, didnt make a recent one, so I'm the one to blame , but I read a post somewhere that restoring a registry backup did the job and the sound was back again. So, what's different between the faulty registry and the good one??
TCPMP problem with BT stack
wen u press the power button to go sandby mode the audio on tcpmp disappears
ronski said:
Also, sound is gone now. No ringtone, voice and music playback. There was a thead that discussed the same problem, but no solution other than hard-reset.
Click to expand...
Click to collapse
Go to the "Audio" tab in Bluetooth settings (manager) and uncheck the "Automute" checkbox. That should be enough.
I wish I could, but there isnt an extra tab which has that option
ronski said:
I wish I could, but there isnt an extra tab which has that option
Click to expand...
Click to collapse
Then your installation is probably faulty... I guess, the only option is to unistall and reinstall, which I think cannot be done without a HR. Sorry...
I'm afraid that is the only option left, the problem occurd after the installation of the new BT stack: BCHS_FOR_POCKET_PC_OZONE[1].ARMV4
it asks for an installation target, but none seems to work, though files are installed and registry is changed (I see the new files in some entries), I see no new options in the BT menu
PROBLEM SOLVED!
I solved the problem!!!!
First, I used this in registry to disable the installation target request of the CAB file which does the BT stack installation:
http://www.pocketpctweaks.com/pocketpc_tweaks/force_install_location_prompt.html
Second, I installed the BT stack again
Third, I have al the options!!!!! disabled the Automute, but still no sound
Fourth, I use my labtop as a headset, connected, dailed, and got sound on my labtop!! Disconnected, turned up the volume, AND VOILA!!! SOUND!!!
happy I am, no hard reset needed
& also see this
http://forum.xda-developers.com/viewtopic.php?t=29219
Just thought I'd bump this thread to say I had exactly the same problem, and could only resolve it by restoring from my weekly auto backup.
I have the aforementioned bluetooth stack installed, but I've had it installed for ages now. Automute was not checked. Checking and unchecking automute did not fix the problem.
Originally, the sound volume slider was moveable, but it would always return to the lowest setting whenever I clicked out of the volume box. I used the Bluesoeil switcher to change to the Microsoft stack, but this didn't fix the issue. Neither did switching the stack back.
It did change the fact that I was able to move the volume slider and not have it return back to the lowest setting immediately after changing. Despite this, sound still did not play, except via bluetooth.
Backing up and hard resetting fixes the issue. Last weeks backup is fine.
I can honestly say I didn't change anything. I woke up this morning and it was like that. Sound was working fine the night before.
Using a T-Mobile (USA) MDA, HTC Wizard, with the last official T-Mobile ROM, version 2.26.
Just very recently, Bluetooth often stops working, and I cannot get it back on again.
I try various ways of turning it back on. For instance:
1) The BT icon in the tray using the "Battery Status Today plug-in. (Actually I have the newest one, now called "Home Screen Plus Plus".)
2) An app called "Bluetooth Toggle, an icon to click that should switch BT ON and Off.
3) Comm Manager
4) Settings, Connections Tab, Bluetooth settings.
None of those work. In any of them, when I click where ever one should to turn on BT, the screen freezes there, only to be resolved by a soft reboot.
Sometimes on rebooting, BT is working again, but other times not. In fact, for the last several hours today, I have not been able to turn BT on again at all, despite reboots.
Does this sound like a hardware problem, or could it be something that could be resolved through software?
Any suggestions, registry tweaks, etc.?
I guess I could try a hard reset or reflash. But before trying something that drastic, which would require reinstalling all my apps, reconfiguring, etc., I'm wondering if there is something else I can try.
Or, if it's an irrepairable hardware problem, then I should perhaps look for another phone as soon as possible, as I want to have BT. I was waiting though, for a good new 3G WM phone to come out on T-Mobile in the next months. So, I would rather fix the MDA to use for a couple more months, rather than getting a Dash or Shadow now. (Wouldn't get the Wing, as I would prefer my next phone to be smaller and lighter than the MDA.)
Any suggestions on what to try, to see if I can get BT working again?
The change often seems to occur on re-booting. BT is working fine. On re-booting the MDA, BT is off, and I cannot turn it back on, as described above.
However, sometimes on rebooting again, it turns back on.
Any explanation for this?
-I have weird problem with my unit, manufacturer - Joying, obviously suggests wrong connection or some problems with canbox (checked with other units - it's ok) so I decided to ask You for help cause I think this may be software related.
My unit out of nothing, suddenly stopped turning off screen, there is no way to turn screen of using "blank screen funtion" it does not react. backlight stays on.
When I turn off my car take the key out music stops playing, it disconnects bluetooth etc. but the screen remains on, sometimes even for 15 minutes then it gets dark.
I obviously tried restoring defaults, tried installing software update, nothing helped. Other units (same Joying, Parrot Asteroid Smart) works fine so I'm sure that it's connected the right way.
Do You have any idea what may cause such behaviour?
mkikill said:
-I have weird problem with my unit, manufacturer - Joying, obviously suggests wrong connection or some problems with canbox (checked with other units - it's ok) so I decided to ask You for help cause I think this may be software related.
My unit out of nothing, suddenly stopped turning off screen, there is no way to turn screen of using "blank screen funtion" it does not react. backlight stays on.
When I turn off my car take the key out music stops playing, it disconnects bluetooth etc. but the screen remains on, sometimes even for 15 minutes then it gets dark.
I obviously tried restoring defaults, tried installing software update, nothing helped. Other units (same Joying, Parrot Asteroid Smart) works fine so I'm sure that it's connected the right way.
Do You have any idea what may cause such behaviour?
Click to expand...
Click to collapse
What is MCU and Firmware/ROM versions, please list to provide context to issue.
marchnz said:
What is MCU and Firmware/ROM versions, please list to provide context to issue.
Click to expand...
Click to collapse
It's Android 5.1.1 and MCU Version is:
2016-08-29 15:46:12 JY_(NOR)__90_C9_7706_5009_CAN(GX)_Newlap
there should be newer versions available, try a software upgrade
Hi all,
Long story short, I messed up my headunit by fiddling with some settings. I selected Spotify to be a navigation app accidentally and now the system changed the Spotify sound behaviour to work only on the navigation-volume channel. As this is inconvenient when using navigation software next to spotify, it also changes the system (overall) volume when spotify is not active. It's just messed up.
So, I truly hope that I someone can help me, or show me how to reset the spotify audio settings back to default. I already tried:
- Uninstalling Spotify and reinstalling.
- Going through all the settings everywhere, there is nothing I can change it with.
- Reset (apparently this only resets some CAR menu settings and app shortcuts on the homescreen but it doesn't really reset to factory default.
As an alternative, how can I reset to factory default? I tried to find it but I can't, looked everywhere even in the secret system menu.
Tried to reset it with the reset button on the front panel but this only seems to reboot the device.
Your help is greatly appreciated. Thanks!
Ben
Device specs:
Hizpo Android Head Unit for Astra H.
Android 8.1
The Android part is heavily modified so it is lacking some standard options and has a CAR menu with some additional options.
KMKaine said:
Hi all,
Long story short, I messed up my headunit by fiddling with some settings. I selected Spotify to be a navigation app accidentally and now the system changed the Spotify sound behaviour to work only on the navigation-volume channel. As this is inconvenient when using navigation software next to spotify, it also changes the system (overall) volume when spotify is not active. It's just messed up.
So, I truly hope that I someone can help me, or show me how to reset the spotify audio settings back to default. I already tried:
- Uninstalling Spotify and reinstalling.
- Going through all the settings everywhere, there is nothing I can change it with.
- Reset (apparently this only resets some CAR menu settings and app shortcuts on the homescreen but it doesn't really reset to factory default.
As an alternative, how can I reset to factory default? I tried to find it but I can't, looked everywhere even in the secret system menu.
Tried to reset it with the reset button on the front panel but this only seems to reboot the device.
Your help is greatly appreciated. Thanks!
Ben
Device specs:
Hizpo Android Head Unit for Astra H.
Android 8.1
The Android part is heavily modified so it is lacking some standard options and has a CAR menu with some additional options.
Click to expand...
Click to collapse
I can't really speak to your problem but a word of caution, I just did the factory restore on my head unit and now the navigation that came with it is gone. Which is why I just registered to see if smarter folks than me can help me figure out how to get it back among some other issues.
Thanks for your note Hicksvilleshick, I send you a private message. I don't mind losing the 'default' navigation as I replace it with a different one. I hope someone can help me with this issue
Solution:
For those headunits without any apparent reset to factory default options in the menu here is the solution.
In my Hizpo Android 8.1 unit I could only reset settings in the 'Car info' menu, this resulted in resetting the car info menu and it's home screen items to default. It did not clear any other settings like wifi, bluetooth or other systeem deep settings. In my case it was not sufficient.
Also the reset button in the SD card slot did not seem to do anything initially when pressing this short or long or with other buttons combined.
Word of caution:
- Assume all data on the device gets wiped. Back-up important stuff.
- Remove de SD card for safety and otherwise the reset might hang on that.
- If it comes delivered with nav software, assume you will lose this install / application. There are other fine free alternatives (that are probably better too) like Navmii, Here (we go), both with offline map support (after downloading) or Waze, Google Maps with online map support.
- After the factory reset all settings, accounts and stuff have to be redownloaded, geconfigured and resetup.
And now the instructions:
- Remove SD card. (Otherwise the reset hangs on the card)
- Press RST button shortly with a paperclip for instance (Behind SD card slot cover in my case).
- Keep tapping the screen with 5 fingers. In the upperleft corner in small text you can see the status.
- It will eventually switch to a sort of round halo with the text; 'resetting'
- After a longer boot it will come back as a factory fresh device.
Hope that helps anyone.
Cheers!
I’m new to this formus, and I’m not sure if I should post here or not, so sorry in advance.
I just purchased and installed my 10inch android 10 head unit (system version v11.1.1)
MCU: Ts9.4.3
I managed to install it on my Honda Civic 2018 and it works great. However I noticed one issue, when ever I turn on the light, or change the gears, it shows a notification that doors are open even though its closed.
I tried everything in the setting but I couldn’t find something that turns off this.
I was wondering if its possible to fix this issue or just turn it off the feature completely.
thanks in advance!
Not MTCD/E, requested mod moves to Android head units forum.
Try searching for your MCU version, or part of it to find appropriate threads, they may also hold your answer.
I managed to fix the issue after I played with the setting.
I believe this issue happened because when I installed the screen, the doors were open, and it stored this information.
To fix this issue for Android 10, Ts9. You have to delete the “stored info”.
This can be done by going to the setting> Car Setting>extra setting (passcode 123456) - this worked for my screen > app memery (click on system apps memery)
I changed more setting on that menu but I think this one that fixed it.
I turned the car off for about 3 hours then when I turned it on it was fixed.
Snake9999 said:
I managed to fix the issue after I played with the setting.
I believe this issue happened because when I installed the screen, the doors were open, and it stored this information.
To fix this issue for Android 10, Ts9. You have to delete the “stored info”.
This can be done by going to the setting> Car Setting>extra setting (passcode 123456) - this worked for my screen > app memery (click on system apps memery)
I changed more setting on that menu but I think this one that fixed it.
I turned the car off for about 3 hours then when I turned it on it was fixed.
Click to expand...
Click to collapse
-- Update --
I managed to fix the door option. however, for some reason I caused the bluetooth app to stop working, I can play music anymore on the headhunt through bluetooth. It seems like it deleted the information everything I close the app.
I tried resetting factory setting but it didn't fix it.
---Dont do the steps I did above. ---
Hello!
Same problem with the doors. Did you solve that?