Hi all, I get this phone recently, but I didn't find any drivers for my old Windows XP to access fastboot and others features. File transfer mode is ok, but no fastboot and co when debugging is on
Thanks a lot
Time to update
Yes think so, but I hope someone was in same situation and found a way to flash note 7 on XP, so I still hope
Related
Hi All,
I accedently flashed the wrong ROM in my HP 614c so I think I bricked it.
I was trying to flash this ROM and only after it was not able to boot anymore i noticed that it was for the 9xx series.
I have tried this but i cant seem to get into download mode also I dont know if this will work with a x64 based PC.
Does anyone have a solution i might try so I will be able to use my HP again? As an emergancy solution im now using a Nokia 3310
Greetings,
Soulslayer
first you need x86 Windows! (there is no x64 drivers), either real x86 windows or running x86 windows in virtual box/vmware player in x64 windows or windows xp mode in win7.
2nd did you make sure you press the right combination of buttons to get into download mode? the button combinations are the 2 side buttons (ok + voice command) and then power button. dnw is the only way to restore as far as i know if sdloader failed
Thnx for the idea and the hints. I tried them all but no of them seem to work. My x86 windows XP is not detecting my HP in download image mode. When I try to add the driver manually i get the following error message: "The specific driver does not have the information about the hardware youre installing."
So it was not possible to download the image for there I decided that I bricked my IPAQ. I already orderded a new phone which is a Sony Experia X1.
Thanks again for all the tips and support!
So I have figured how to do this, YAY, finally. without reinstalling OS.
You will need:
VMWare
WinXP installation disc (or image does not matter)
Artemis_USPL.zip archive
Activesync installation
Okay Install VMWare, make new virtual computer then install Windows XP on this computer.
Transfer all needed files to this computer.
Install Activesync
Connect phone, then connect it to virtual pc
run CID unlock
This should bypass problems with usb drivers in WIN 7 (VISTA) - 260 CONNECTION PROBLEM
I think it given a hardware problem
Scavender said:
So I have figured how to do this, YAY, finally. without reinstalling OS.
You will need:
VMWare
WinXP installation disc (or image does not matter)
Artemis_USPL.zip archive
Activesync installation
Okay Install VMWare, make new virtual computer then install Windows XP on this computer.
Transfer all needed files to this computer.
Install Activesync
Connect phone, then connect it to virtual pc
run CID unlock
This should bypass problems with usb drivers in WIN 7 (VISTA) - 260 CONNECTION PROBLEM
Click to expand...
Click to collapse
This USB driver for windows 7 ..
Hakim Rahman said:
This USB driver for windows 7 ..
Click to expand...
Click to collapse
Thanks alot for sharing that driver! I didn't want to install a virtual computer only because of a not working driver. Finally my problem is solved.
But with Win 7 64 bit I still had to overcome the problem with the unsigned driver. I tied lots of things and finally got your unsigned driver working using this program:
"Driver Signature Enforcement Overrider 1.3b" you can find it on ngohq.com
Note: Read the installation instructions from the link above, it explains how to enable the Windows Test Mode and how to sign a system file.
Now ROM updating using Windows 7 x64 isn't a problem anymore.
Thys stuff should be pinned.
Cause said:
Thys stuff should be pinned.
Click to expand...
Click to collapse
will do, ill add this to the uspl rom upgrade tricks and tips thread.
btw Cause might be worth checking the thread dude, click the link in my signature...
GOOD WORK Hakim! - i will quote your entire post for my thread, keep it up dude!!!
done...
ive quoted you both and added the quotes to the first post here
FYI - if you notice anything that you think should be added to my tips and tricks thread, let me know and ill see to it that it will be done..
i have a newer device now so i am not always viewing the artemis section, however if you send me a PM ill get it done asap
Rn
Update: I did a factor reset and that still didn't work. This really sucks...PLEASE HELP ME!!!
I recently installed Android 2.3.4 manually to my Nexus S (I9020T). Now I can no longer get USB connection to my computer. It charges fine, just no USB. I've manually installed multiple times and this is the first time I've had a problem. I searched through the forums and no one else seems to be having this issue. Without USB connection I can't even reinstart the ROM and all my files and pics are trapped on the phone...PLEASE HELP!!!
If you're using Windows 7 x64, you'll need to install 64bit drivers (if you haven't already).
aerobahn said:
If you're using Windows 7 x64, you'll need to install 64bit drivers (if you haven't already).
Click to expand...
Click to collapse
My notebook at home is Windows 7 64 bit, my work PC is Windows XP. I was able to mount the USB on both of them before this update. Where would I get drivers for this update that would make it work on both computers?
struggling on what i thought was a fairly basic concept.
trying to unlock using davinci/simlock.
i've tried various drivers but nothing will install-
the abd drivers from the simlock website;
from the se developers website;
from a couple of forums where people confirm they work;
pc companion;
letting windows find and download.
everytime i get error message:
Windows was unable to install your SEMC USB Flash.
Windows could not find driver software for your device.
help! please
It is really strange. My win7 x64 has installed the drivers without any question. Have you got SP1?
Sent from my heart using a brain )
i did a system restore and rolled it back a couple of days and it installed first time. guess i messed something up somewhere. anyhoo now my X8 is unlocked
Asycid said:
It is really strange. My win7 x64 has installed the drivers without any question. Have you got SP1?
Sent from my heart using a brain )
Click to expand...
Click to collapse
Sp1???????? There's no WIN 7 SP2!!
as the title says i can't find and install a fastboot driver for my htc magic in windows 8. I tried a several but without sucess. I hope that someone can help me with this because i want to install a recovery and without fastboot i can't do it :/
further information adb drivers work
stiker said:
as the title says i can't find and install a fastboot driver for my htc magic in windows 8. I tried a several but without sucess. I hope that someone can help me with this because i want to install a recovery and without fastboot i can't do it :/
further information adb drivers work
Click to expand...
Click to collapse
I have win 7 x64. htc sync + official android sdk for win x64 made it right for me.
It is possible that my system downloaded drivers from the Internet also.
Did you try that (htc sync + official android sdk for win x64) ? You can do a online search for drivers (from the device manager).
superbob56 said:
I have win 7 x64. htc sync + official android sdk for win x64 made it right for me.
It is possible that my system downloaded drivers from the Internet also.
Did you try that (htc sync + official android sdk for win x64) ? You can do a online search for drivers (from the device manager).
Click to expand...
Click to collapse
the problem was that i was using USB 3.0 port lol