Need Help with OnePlus2 - OnePlus 2 Q&A, Help & Troubleshooting

Hi i need a bit help with my oneplus2 i want that when i connect my phone to my laptop with usb it should automictically boot into recovery(Not when i connect to wall to charge) as my hardware buttons are not working(both power and volume) so i am not able to boot when it turns off and also if my phone got stuck in bootloop i will be able to recover it please Help !
Thanks

Related

HP 6815 Cant Turn on :(

I have problem in my HP 6815rw, during update software my handset turned off because of my computer reboot and now it’s like a dead and not able to turn on and only red light appear when charging or usb cable switched is there possible that its loader reload again?? pls help me accordingly
Regards
Mani

Please help, can't understand what's happening

hi everybody.
Today I installed the miuiv7 from this site and everything was working good
I tried to install the gapps but when I tried to restart it again i was stucked at the mi logo screen
I tried to restart it, to access the recovery mode (TWRP) and reinstall the rom, but it gave no life signals...
litterally gone.
If I connect it to a power supply it makes no light or anything else
but if I connect it to my PC (running debian) it detect a lot of drives (I think it sees all of his partitions)
please help me...
thanks in advice.

Bricked d290n, not detected for PC - help needed

Hello everyone,
I think I've completely bricked my phone. I had a problem with security boot and after patching wrong "aboot.bin" it doesn't work Currently when i'm trying to turn it on, it only vibrates and nothing else happen. When I plug in the USB and connect it to the PC, phone also vibrates but isn't detected. When i put the battery off and connect the charger or usb it shows screen about not battery plugged.
Please help me and explain how to make it detected again.
nalif20 said:
Hello everyone,
I think I've completely bricked my phone. I had a problem with security boot and after patching wrong "aboot.bin" it doesn't work Currently when i'm trying to turn it on, it only vibrates and nothing else happen. When I plug in the USB and connect it to the PC, phone also vibrates but isn't detected. When i put the battery off and connect the charger or usb it shows screen about not battery plugged.
Please help me and explain how to make it detected again.
Click to expand...
Click to collapse
Unfortunately, there's nothing you can do at this point.. If you are still under warranty, just return the phone, they will probably change its motherboard or just change the phone itself. I have also been in the same situation as you, I tried everything, but nothing worked..
nalif20 said:
Hello everyone,
I think I've completely bricked my phone. I had a problem with security boot and after patching wrong "aboot.bin" it doesn't work Currently when i'm trying to turn it on, it only vibrates and nothing else happen. When I plug in the USB and connect it to the PC, phone also vibrates but isn't detected. When i put the battery off and connect the charger or usb it shows screen about not battery plugged.
Please help me and explain how to make it detected again.
Click to expand...
Click to collapse
Can you get into the download mode? Vol + and then plug a cable into your phone
And i have same problem,but no one dont know how to resolve this...
Are you install corect LG USB drivers ?

Bricked Galaxy S8 USB JIG?

Hello! Long story short I've tried to flash TWRP from Linux with a Windows VM using ODIN and ended up with a "hard-soft" bricked phone. Hard-soft because on the phone is just a brick with a fancy screen that displays only the logo. No recovery, no download mode, no $lsusb recognition by the PC. I'm hoping to be able to boot in download mode using a diy USB JIG that I am willing to create. Only small problem: I can't find any schematic or any guidance for the type-C connector. Does anybody know if the JIG method is still present, if so, where should I connect the resistor to? Also, if you have any suggestions on how I can bring my phone back, I would appreciate the help. Symptoms are as followed: The phone turns on, displays the Samsung logo and from there is an infinite bootloop. The key combos for recovery and download mode are not working. Can't even force reboot the phone. At this point I have opened up the device and removed the battery connector, reconnected the battery after ~12h and still the same problem. Also, there is no charging interface when I plug the phone into the charger. Now it's just a fancy brick. PS: It's the exynos version. Thank you!
EDIT: The volume rocker wasn't working. After securing the motherboard better the I was able to recover from download mode.

Bootloop after replacing the battery

Hi everyone,
I need help with an HTC U Ultra. It's been about 6 months since I didnt turned on because the battery was dead, it wouldn't turn on or charge. Today I just changed the battery but the phone doesnt boot at all. It reboots endlessly on the screen with the HTC logo. I wanted to flash the official firmware but since I didn't enable USB debugging before and can't do it now because the phone won't boot. Will it be recognized by fastboot if I connect it via USB to a computer while being on the bootloader screen? Thanks in advance

Categories

Resources