hi everybody.
Today I installed the miuiv7 from this site and everything was working good
I tried to install the gapps but when I tried to restart it again i was stucked at the mi logo screen
I tried to restart it, to access the recovery mode (TWRP) and reinstall the rom, but it gave no life signals...
litterally gone.
If I connect it to a power supply it makes no light or anything else
but if I connect it to my PC (running debian) it detect a lot of drives (I think it sees all of his partitions)
please help me...
thanks in advice.
Related
Hello everybody,
As i was flashing the new Acer Liquid E 1.100.05 rom, the process stopped from responding, i tried to unplug and plug the usb nothin happened, then i restarted the phone, it boot to the old rom but without usb connectivity, i can access to the recovery mode but either the phone or the pc can detect each other it still can charge, i reinstalled drivers, changed pc, same problem, no usb detection even in recovery mode, i can see the sd from recovery though, is there a way to flash the original rom 1.6 from the sd.
thanks in advance.
Try booting in Bootloader (Camera + <), and install malez recovery from here :
http://code.google.com/p/acer-liquid-malez-recovery/
If you already have it, do it once again.
Reboot in recovery, and acer tool should recognize the phone.
Otherwise, check @modaco here : http://android.modaco.com/content/acer-liquid-liquid-modaco-com/308361/bricked-liquid-heeelp/
This should help
thx man, you are da man, it works
thx again.
Hello. Few months ago I installed unofficial Cyanogenmod 11 on my E610. After updating baseband it worked perfectly. After some time I decided to restore my phone to the state after installing CM11. It worked no problem. Today I wanted to do the same, and after installing SuperSU and Texdroider DPI I rebooted my cellphone, and it stucks on the cyanogenmod boot logo. If I try to get to recovery mode it stucks on the LG logo instead of CM. Hard reset is not happening at all. I tried to connect my phone via LG User Support Tool and install kdz firmware, but no luck. Although when I connect my phone without the battery to my PC i hear the "ding" windows sound, and phone exists in device manager. It also creates some disc drive in my computer, but unfortunately it's empty. I think textdroider has changed the build.prop file, so the cyanogenmod is not able to start at all. Is there any possibility to get to the build.prop file and change it, so phone will start? Or maybe somehow I can reset my phone or reinstall firmware using my USB cable without entering usb debug or recovery mode? Thanks in advance for any idea :crying:
Put your phone in Emergency Download Mode : switch it off, hold volume down button while plugging USB cable (already connected to the PC).
Then use the Support Tool to go back to LG ROM
mikesrike said:
Hello. Few months ago I installed unofficial Cyanogenmod 11 on my E610. After updating baseband it worked perfectly. After some time I decided to restore my phone to the state after installing CM11. It worked no problem. Today I wanted to do the same, and after installing SuperSU and Texdroider DPI I rebooted my cellphone, and it stucks on the cyanogenmod boot logo. If I try to get to recovery mode it stucks on the LG logo instead of CM. Hard reset is not happening at all. I tried to connect my phone via LG User Support Tool and install kdz firmware, but no luck. Although when I connect my phone without the battery to my PC i hear the "ding" windows sound, and phone exists in device manager. It also creates some disc drive in my computer, but unfortunately it's empty. I think textdroider has changed the build.prop file, so the cyanogenmod is not able to start at all. Is there any possibility to get to the build.prop file and change it, so phone will start? Or maybe somehow I can reset my phone or reinstall firmware using my USB cable without entering usb debug or recovery mode? Thanks in advance for any idea :crying:
Click to expand...
Click to collapse
in these cases emergency mode should work
removing battery sim sd etc... connect your phone to the pc throught us cable pressing vol- it automatically boot into download mode and you can easily use kdz.
make sure you have the last driver from lg websites else kdz wont find your phone, and set emergency option in kdz everything else it similar to a normal flash
Ok so I was trying to install CM13, so i read something on a forum (I think XDA), and installed this zip that I downloaded from the website then installed the zip from my custom recovery, and then restarted, and I could boot into CM13, but then I lost my custom recovery! (TWRP). When I try to go to the factory reset screen when the phone is off, I select all the Yes delete data stuff, because that's how I got into my custom recovery, but now it says secure boot error, certification error, etc. and just boots into a black screen. So the only option that I am stuck with, is i figured how to get it into the firmware update mode (download mode), but no custom recovery, and when I connect it to the LG Mobile Support tool, It doesn't say it is connected, I have installed the drivers like 3 times, and my phone keeps connecting and disconnecting from my computer (I can hear the ding sound each time it disconnects randomly and connects randomly. I have no idea what to do. Am I out of luck? Pleeeeaseee help!!!!
LG model D803 Canadian version, was running 5.1 CM12 just fine before until i decided to update and this crap started happening
Have you tried different USB cables and different USB ports?
audit13 said:
Have you tried different USB cables and different USB ports?
Click to expand...
Click to collapse
Yes I have, still doesn't work but thanks anyways
So yesterday I installed TWRP alongside CM13.
After that I got some problems with the ROM (rebooting, slow charging) so I decided to return to stock. To flash the stock .kdz I needed to go into download mode, that however did not work my phone just booted normally into CM when I tried to use the method to get into download mode (vol+ & USB). I even tried to force download mode through adb on PC however that also only rebooted the phone.
Then I did a wipe in TWRP (everything except Internal Storage) and shut off the phone.
Now I have the problem that I can not boot (because I obviously have no ROM installed anymore) but I also can't get into recovery anymore.
Also my phone seems to be in "only charge" mode from CM so my PC does not even recognize it correctly. I can't even see it in device manager and neither adb, nor the flash tool nor anything recognizes it.
When I connect my phone to the PC it just shows the CM battery icon that you see when you charge your phone while it's turned off and the LED is glowing yellow.
All of this are things that were new with CM so I guess there is still something left from CM that does prevent my G2 from acting as MTP.
Please tell me there is still hope...
Hi everyone,
I see this is an issue that is being extensively talked about but after trying many solutions proposed by many users I am still out of luck, there is no way I can connect my device to a PC. USB debugging is on, USB config is set to MTP, USB drivers are installed.... but still, no luck, won't connect.
This means that I cannot even unlock the bootloader the official way since the phone goes undetected. I am on MIUI 7 Global Stable MALCNDE and I cannot upgrade to MIUI 8.... because if I reboot to stock recovery from Updater, the phone will reboot to a fancy diagram advising me to plug in a USB cable. Also, if I try to reboot to recovery by holding power/vol +, the phone boots in some terrifying recovery in chinese, with only four options that are translated. One of them is recovery and if I click on it.... I get that fancy looking diagram.
So please, any advice on this would be much appreciated.
Thanks.
Did you tried the official MiFlash app? http://api.bbs.miui.com/url/MiFlash