Hello everybody,
As i was flashing the new Acer Liquid E 1.100.05 rom, the process stopped from responding, i tried to unplug and plug the usb nothin happened, then i restarted the phone, it boot to the old rom but without usb connectivity, i can access to the recovery mode but either the phone or the pc can detect each other it still can charge, i reinstalled drivers, changed pc, same problem, no usb detection even in recovery mode, i can see the sd from recovery though, is there a way to flash the original rom 1.6 from the sd.
thanks in advance.
Try booting in Bootloader (Camera + <), and install malez recovery from here :
http://code.google.com/p/acer-liquid-malez-recovery/
If you already have it, do it once again.
Reboot in recovery, and acer tool should recognize the phone.
Otherwise, check @modaco here : http://android.modaco.com/content/acer-liquid-liquid-modaco-com/308361/bricked-liquid-heeelp/
This should help
thx man, you are da man, it works
thx again.
Related
hello i have opad p10 oem version of advent vega after some market application install first my desktop window gone then i tried to restart in recovery mode but tablet is no screen cant inter in cwm only white circle with andriod robot with in upear micro second and gone pleas help i cant connect with my pc because usb problem any method to boot or flash with sdcard i have some knowledg about linux and lablet install 3.2 9n1 thanks sorry for my bad english
As far as i am aware the only way out is to reflash the stock firmware, without usb your a bit stuck. what is the problem with the usb connection?
i am trying 3 systems xp w7-64 w7-32 all are device not recognized error in device maneger is yellow mark unknown device
You need to install the usb recovery drivers. They are on the advent/pov websites. I assume there the same as your tab.
i cant access my tablet because i have usb not recognized error i want any alternat method to flash my tablet rom like sd card or usb drive thanks
no one solved my problem any idea if i use usb to serial cable or usb to lpt cable
You need to sort the usb driver issue. That will solve your problem. As far as i am aware flashing the stock rom with any other cable is not possible.
finaly i found a pc i install a nvidia driver audi sign green but run moddedstock its showing error nvflash uid read failed what this error and some time nvflash runing but blank screen nothing hapen
every time connect to pc masseg appear this device perform faster but connect to usb 1.1 and every time flash hang betwen system.img copying last file why is connect slow speed not full usb 2 speed there is cable problem or some thing else or driver problem ihave tried vega flash and modded stock v2 any help to try with linux ubuntu pleas help me thanks
any help to flash only system.img or only flash cwm to boot into cwm and then install modded rom in to opad
Can you boot in recovery mode?
SGS2-i9100; SGS3-i9300; Archos 101 Turbo (G9/250gb/512mb)
help me please my iconia just have cant start up nothing works seems like the Bootloade is dead, the Recovery mode, CWM Mode, Computer Connection as well. when i try to connect to pc with cable data just detect acer picasso usb boot recovery driver cant get the cpu id from the dview help me pls
Take a look at this.....
http://forum.xda-developers.com/showthread.php?t=1255519&page=2
There's a link in the posts that may help you.
I hope it helps you.
try getting a ROM, rename to update.zip, put on root directory on your External SD, put back in, boot to recovery, and try....
Edit: Wrong thread
Hello. Few months ago I installed unofficial Cyanogenmod 11 on my E610. After updating baseband it worked perfectly. After some time I decided to restore my phone to the state after installing CM11. It worked no problem. Today I wanted to do the same, and after installing SuperSU and Texdroider DPI I rebooted my cellphone, and it stucks on the cyanogenmod boot logo. If I try to get to recovery mode it stucks on the LG logo instead of CM. Hard reset is not happening at all. I tried to connect my phone via LG User Support Tool and install kdz firmware, but no luck. Although when I connect my phone without the battery to my PC i hear the "ding" windows sound, and phone exists in device manager. It also creates some disc drive in my computer, but unfortunately it's empty. I think textdroider has changed the build.prop file, so the cyanogenmod is not able to start at all. Is there any possibility to get to the build.prop file and change it, so phone will start? Or maybe somehow I can reset my phone or reinstall firmware using my USB cable without entering usb debug or recovery mode? Thanks in advance for any idea :crying:
Put your phone in Emergency Download Mode : switch it off, hold volume down button while plugging USB cable (already connected to the PC).
Then use the Support Tool to go back to LG ROM
mikesrike said:
Hello. Few months ago I installed unofficial Cyanogenmod 11 on my E610. After updating baseband it worked perfectly. After some time I decided to restore my phone to the state after installing CM11. It worked no problem. Today I wanted to do the same, and after installing SuperSU and Texdroider DPI I rebooted my cellphone, and it stucks on the cyanogenmod boot logo. If I try to get to recovery mode it stucks on the LG logo instead of CM. Hard reset is not happening at all. I tried to connect my phone via LG User Support Tool and install kdz firmware, but no luck. Although when I connect my phone without the battery to my PC i hear the "ding" windows sound, and phone exists in device manager. It also creates some disc drive in my computer, but unfortunately it's empty. I think textdroider has changed the build.prop file, so the cyanogenmod is not able to start at all. Is there any possibility to get to the build.prop file and change it, so phone will start? Or maybe somehow I can reset my phone or reinstall firmware using my USB cable without entering usb debug or recovery mode? Thanks in advance for any idea :crying:
Click to expand...
Click to collapse
in these cases emergency mode should work
removing battery sim sd etc... connect your phone to the pc throught us cable pressing vol- it automatically boot into download mode and you can easily use kdz.
make sure you have the last driver from lg websites else kdz wont find your phone, and set emergency option in kdz everything else it similar to a normal flash
So yesterday I installed TWRP alongside CM13.
After that I got some problems with the ROM (rebooting, slow charging) so I decided to return to stock. To flash the stock .kdz I needed to go into download mode, that however did not work my phone just booted normally into CM when I tried to use the method to get into download mode (vol+ & USB). I even tried to force download mode through adb on PC however that also only rebooted the phone.
Then I did a wipe in TWRP (everything except Internal Storage) and shut off the phone.
Now I have the problem that I can not boot (because I obviously have no ROM installed anymore) but I also can't get into recovery anymore.
Also my phone seems to be in "only charge" mode from CM so my PC does not even recognize it correctly. I can't even see it in device manager and neither adb, nor the flash tool nor anything recognizes it.
When I connect my phone to the PC it just shows the CM battery icon that you see when you charge your phone while it's turned off and the LED is glowing yellow.
All of this are things that were new with CM so I guess there is still something left from CM that does prevent my G2 from acting as MTP.
Please tell me there is still hope...
Well. First things first. the root of the issue is probably a bad usb port i guess as it's very unstable it even sometimes reboots into download mode on its own when i plug my phone to charge or even gives a Not charging state until i replug it many times then it gives the normal charging (AC) so it's a really messy one.
that's the usual anyway i was rooted and flashed a lollipop rom normally then bugged some apps so i decided to reflash stock kitkat rom however like i said it's a bad usb connection so sometimes the flashing goes slowly and i have to replug the cable for it got smoothly again.
this time i noticed this at 15% and instead of staying in download mode stuck at that the phone rebooted and ofcourse this time only a black screen no download mode no recovery no nothing i guess a typical hard brick? this is my first time dealing with a hard brick so i didn't know what to do at all so i'm still figuring out stuff anyway i installed Qcomm drivers and checked the device manager it's the 9006 one not the 9008 and it shows many drives on my pc (windows 7 64-bit) but no partitions in windows xp 32-bit on another pc and on the laptop it gives no drives i think. i tried with SRK tools it says everything as it should but when it's done i unplug the cable then reboot however still shows many partitions and no download mode.
I don't use my phone alot however i don't own another one so i kinda need help fast please so if anyone has any ideas don't hesitate please.
Thanks in advance.:good:
Update: After following the linux method i now don't have a black screen only stuck on lg logo and still no download mode.
the phone isn't recognized by the pc at all not even 9006 or 9006
the recovery gets stuck at processing and it doesn't say fastboot either on the logo screen.
Croshio said:
Well. First things first. the root of the issue is probably a bad usb port i guess as it's very unstable it even sometimes reboots into download mode on its own when i plug my phone to charge or even gives a Not charging state until i replug it many times then it gives the normal charging (AC) so it's a really messy one.
that's the usual anyway i was rooted and flashed a lollipop rom normally then bugged some apps so i decided to reflash stock kitkat rom however like i said it's a bad usb connection so sometimes the flashing goes slowly and i have to replug the cable for it got smoothly again.
this time i noticed this at 15% and instead of staying in download mode stuck at that the phone rebooted and ofcourse this time only a black screen no download mode no recovery no nothing i guess a typical hard brick? this is my first time dealing with a hard brick so i didn't know what to do at all so i'm still figuring out stuff anyway i installed Qcomm drivers and checked the device manager it's the 9006 one not the 9008 and it shows many drives on my pc (windows 7 64-bit) but no partitions in windows xp 32-bit on another pc and on the laptop it gives no drives i think. i tried with SRK tools it says everything as it should but when it's done i unplug the cable then reboot however still shows many partitions and no download mode.
I don't use my phone alot however i don't own another one so i kinda need help fast please so if anyone has any ideas don't hesitate please.
Thanks in advance.:good:
Update: After following the linux method i now don't have a black screen only stuck on lg logo and still no download mode.
the phone isn't recognized by the pc at all not even 9006 or 9006
the recovery gets stuck at processing and it doesn't say fastboot either on the logo screen.
Click to expand...
Click to collapse
You must have flashed wrong version of the rom .
After trying the linux method, if you cant get into fastboot mode, recovery or not in download mode, then try this : http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
This requires you to open your phone so be cautious .
Thanks I followed that guide. Download mode after. Using the Windows tool instead of Linux then flash tool normally.