Database Users

High resolution pictures for contacts

Hello,
Does anyone knows how to have high resolution pictures for contacts without 3rd party software?
Thank you.

No one?
Thank you

You need to have the picture on the phone then select use contact icon-existing contact if they are already in the phone book and you should be all set. If you try to do it through Outlook on the computer they will look bad.

rsacipher said:
You need to have the picture on the phone then select use contact icon-existing contact if they are already in the phone book and you should be all set. If you try to do it through Outlook on the computer they will look bad.
Click to expand...
Click to collapse
This.
Or use Facebook contact pics!

my solution works with a little script (dont know if you can call that 3rd party app), but it works perfectly and fast, too:
found it a long time ago in these forums, but cant find the original thread anymore...
THIS IS NOT WRITTEN BY MYSELF, BIG THANKS TO THE ORIGINAL AUTHOR!!!
1) rename your high-res-contactpictures to firstname_lastname.jpg
2) place the exe and the contactpictures in a folder on your HD2
3) execute the .exe, follow the instructions
greetings, lauchi

lauchi said:
my solution works with a little script (dont know if you can call that 3rd party app), but it works perfectly and fast, too:
found it a long time ago in these forums, but cant find the original thread anymore...
THIS IS NOT WRITTEN BY MYSELF, BIG THANKS TO THE ORIGINAL AUTHOR!!!
1) rename your high-res-contactpictures to firstname_lastname.jpg
2) place the exe and the contactpictures in a folder on your HD2
3) execute the .exe, follow the instructions
greetings, lauchi
Click to expand...
Click to collapse
Hmm do i trust a small EXE file posted by someone with a post count of 13?

nobody forces you to run it....
btw...i registered in 2007, and waited 3 years to post a suspicious .exe that will harm you.....yeeeeessssss, that was my great plan....

[How To] New EM Diagnostic Menu - FW Updated DVP's

Folks, the hidden menu under the Dell EM app has been cracked open. Here is how to get to it. Its still stupid of Dell to have a convoluted way to get get to it.
1. GO to EM app on your DVP (dial ##634# - if u haven't done so to make the app appear under apps)
2. Open physical keypad
3. Double tap the blank dark area of the screen (below the MMS settings)
4. On the physical keyboard, press each of the first row buttons (qwertyuiop)
5. This should open up the advanced menu.
Same password to get to the RD Test and Protocol - *#6336#
Be careful when using the Chinese language menu's. It will make the app language as Chinese. You can always exit and come back to the app.
New features:
Nothing much except one important feature - File Browser (Windows Explorer)
Registry Editor - still doesn't work for writing and only good for reading.
How to Get to File Browser:
1. Go to RD Test. In the input box type *#6336#
This will open up RD test page.
2. Scroll to the bottom and click About EM. This will open up SORRY APPLICATION.
3. In the empty input box, type 983. This will open up the file browser.
The Explorer is so slow and might crash the app.
Note:The above steps only works for the DVP's that have the new EM App and updated FW version - 2250.1800.7355.205 and beyond or close to that.
If you try to load the new EM App in the current DVP's, it will not work for the new features.

--deleted. wrong post

Does any of this allow the DVP to backup SMS, for example if they are stored in a data file?

efjay said:
Does any of this allow the DVP to backup SMS, for example if they are stored in a data file?
Click to expand...
Click to collapse
Will need to investigate on that front...Might take some time.

notebookgrail said:
Will need to investigate on that front...Might take some time.
Click to expand...
Click to collapse
Thanks, fingers crossed!

Built-in file explorer
Thanks for the info on the built-in file explorer.
One thing I have noticed is it shows more files and directories than other methods of looking at the files (like using the web server app).
I can see files in the root as well as many other directories.
For example, when I open the file explorer I see:
Storage Card\
Windows\
Temp\
Application Data\
mxip_notify.vol
Applications\
mxip_system.vol
My Documents\
Program Files\
Wallpapers\
DOCFILE\
and more...
I am not sure that it is helpful, but it is different.

Joelh1 said:
Thanks for the info on the built-in file explorer.
One thing I have noticed is it shows more files and directories than other methods of looking at the files (like using the web server app).
I can see files in the root as well as many other directories.
For example, when I open the file explorer I see:
Storage Card\
Windows\
Temp\
Application Data\
mxip_notify.vol
Applications\
mxip_system.vol
My Documents\
Program Files\
Wallpapers\
DOCFILE\
and more...
I am not sure that it is helpful, but it is different.
Click to expand...
Click to collapse
anyone else thinking this looks similar to windows mobile 6.1 file explorer directories (save from doc file)
keep us posted. Shame not everything works

Let me write a quick app that writes the read file to a isolated storage and we can dump the file from there.

Any of you headed to Mix next week?

notebookgrail said:
Let me write a quick app that writes the read file to a isolated storage and we can dump the file from there.
Click to expand...
Click to collapse
keep us posted
btw when is mix?

domineus said:
keep us posted
btw when is mix?
Click to expand...
Click to collapse
Mix is Apr 12-14.
Are you handing over Chris a dvp?

He won't be getting mine to keep, but if anyone smarter than I feels like they can do something with the registry after having access to a device, I'm game.

notebookgrail said:
Mix is Apr 12-14.
Are you handing over Chris a dvp?
Click to expand...
Click to collapse
I can't
remember the samsung focus I got from here? yeah its sitting nice in a repair center in plano...screen issues up the wazoo. Plus some more things I'll PM...trust me never has my tech been so broken at a time I can't pay for it =/

Do any of the new menus allow tethering without the HTC driver hack?

seaephpea said:
Do any of the new menus allow tethering without the HTC driver hack?
Click to expand...
Click to collapse
Not until we get hold of Qisda Driver similar to HTC.

How bout write access to the file explorer? Everything I find says it's for HTC products only.

Is there a way to permanetly change the touch sensitivity of the phone or will it always reset to the default of 40 after a power cycle?

I love the LED flash light option this gives us now! Sweet!

theusername said:
I love the LED flash light option this gives us now! Sweet!
Click to expand...
Click to collapse
This is a nice app that i put together earlier for the flashlight.
http://forum.xda-developers.com/showthread.php?t=956063&highlight=flashlight
For those of you with the new updated FW, let me if this app isn't working. I will upload the updated one.

AWESOME thanks !
How did you figure this out..?
Anyway.. any idea if the NEW firmware update coming soon, is going to be NEW to us as well ? Camera still isnt fixed, and radio seems worse than old phone.

MTK2502C Development

I just bought an Apple Watch clone purely out of curiosity. It was £60 delivered and YouTube reviews seemed good enough, so I thought I'd give it a go.
Whilst it's perfectly usable, I feel like they could have done a much better job on the OS. Everything is fixed in terms of colours and styles (minus 2x UI options and a few rubbish clock faces) and generally it feels a bit 'basic' and rushed.
I've been searching for ages trying to find out if there's a way of somehow 'opening up' the OS (using an SDK?) and changing some simple things like colour codes, and then maybe learning more and tweaking watch faces etc. I'm new to that kind of thing but I do programming on other devices.
I can't find anything at all on MTK2502C development. There's a few bits on MediaTek's website, a couple of Russian forums with files that go to dead links, and that's about it.
Does anyone know of any options with devices like this? The chip is reasonably popular in Asian markets it seems, as I've seen it on Moto 360 clones and other Chinese watches - so I figured it would have some info somewhere?
Thanks

Yes man, I have worked on a rebranding (changing watchfaces according to the store profile)
So yes, I've made kind of development

Wow really? I expected no response to this at all!
I want to say "How do you do it" but I fear that's too much of a blanket question. Do you have any links/advice in getting started with this, even if it's just dipping in and changing colour codes etc? Any resources you can share would be really helpful.
Thanks

sav25 said:
Wow really? I expected no response to this at all!
I want to say "How do you do it" but I fear that's too much of a blanket question. Do you have any links/advice in getting started with this, even if it's just dipping in and changing colour codes etc? Any resources you can share would be really helpful.
Thanks
Click to expand...
Click to collapse
Calm down, man, I'm not a brain killer I have created a relative simple algorithm so that ANYONE having minimum interest to be able to create / insert any watch skin they want
First thing first, I have to make sure that your watch is compatible with the firmware project I have developed because I don't want brick out your item, your watch has a chinese brand or something?
Tell it loudly!

Golem_ said:
Calm down, man, I'm not a brain killer I have created a relative simple algorithm so that ANYONE having minimum interest to be able to create / insert any watch skin they want
First thing first, I have to make sure that your watch is compatible with the firmware project I have developed because I don't want brick out your item, your watch has a chinese brand or something?
Tell it loudly!
Click to expand...
Click to collapse
Cool sounds interesting.
My watch is from this listing which suggests it's made by Goophone (however I haven't seen it on Goophone's website):
http://www.dhgate.com/product/new-goophone-smart-watch-mtk2502c-1-54-inch/165103941.html
The watch is discussed here in this Russian forum, and it seems to also come under the name as IWO watch, MOWatch and GWatch:
http://4pda.ru/forum/index.php?showtopic=682981
On the watch itself it gives the Version number in the 'About' section which may or may not be useful:
W300GG_02C_WATCH_INT_UV_02_151121
There's also this link which...well I have no idea what he's saying or doing but it might make more sense to you:
https://www.youtube.com/watch?v=Qrks1jdoboU
Cheers

sav25 said:
Cool sounds interesting.
My watch is from this listing which suggests it's made by Goophone (however I haven't seen it on Goophone's website):
http://www.dhgate.com/product/new-goophone-smart-watch-mtk2502c-1-54-inch/165103941.html
The watch is discussed here in this Russian forum, and it seems to also come under the name as IWO watch, MOWatch and GWatch:
http://4pda.ru/forum/index.php?showtopic=682981
On the watch itself it gives the Version number in the 'About' section which may or may not be useful:
W300GG_02C_WATCH_INT_UV_02_151121
There's also this link which...well I have no idea what he's saying or doing but it might make more sense to you:
https://www.youtube.com/watch?v=Qrks1jdoboU
Cheers
Click to expand...
Click to collapse
The series "it may be" the most important detail yes you have exactly the watch we are talking about. First of all, for any case you have to do a firmware extraction from your own phone, just to avoid all kind of unwanted events (if you speak about index table of colors makes me believe you already got over "readback breaktrough")
So the project consists in a firmware matrix having instead watch faces some markers (markers for main watches as well as for preview ones), you get it, start a small app (Mtk Res) where, by loading ROM file you become able to insert instead markers 240x240 gifs for main skins and 150x150 gifs for preview, save, flash the resulted firmware and tada
check here the stuff - link -
feel free to ask for any kind of clarifications

Golem_ said:
The series "it may be" the most important detail yes you have exactly the watch we are talking about. First of all, for any case you have to do a firmware extraction from your own phone, just to avoid all kind of unwanted events (if you speak about index table of colors makes me believe you already got over "readback breaktrough")
So the project consists in a firmware matrix having instead watch faces some markers (markers for main watches as well as for preview ones), you get it, start a small app (Mtk Res) where, by loading ROM file you become able to insert instead markers 240x240 gifs for main skins and 150x150 gifs for preview, save, flash the resulted firmware and tada
check here the stuff - link
feel free to ask for any kind of clarifications
Click to expand...
Click to collapse
Not sure I totally understand but I'll have a play and let you know how I get on. Thanks very much :good:

Ok I got stuck pretty fast. I downloaded the files but I don't really know how to extract my current smartwatch software, or how to load new things in. Am I missing something?
I'm guessing there's some software I need? Do you know of any good tutorials on the web?
Thanks

sav25 said:
Ok I got stuck pretty fast. I downloaded the files but I don't really know how to extract my current smartwatch software, or how to load new things in. Am I missing something?
I'm guessing there's some software I need? Do you know of any good tutorials on the web?
Thanks
Click to expand...
Click to collapse
Ah, I'm sorry, reading the main post in thread I thought you already was playing with Flash Tool and so on
So, you have need of Flash Tool and drivers (attached), install drivers, TURN OFF your watch start flashtool under xpsp3 compatibility as administrator, go add scatter file (the one you find in firmware you got from me) after press memory test /(ONLY) ram test, press start and connect the phone, if the phone got connection will show a report of your NOR flash, whatever, good made the link, disconnect the phone, get here - http://forum.xda-developers.com/sma.../readback-extractor-mtk6260-firmware-t3289272 - and do first 5 steps (at third step instead 0x01000000 you have 0x00800000) and after come to me with the 8MB file, I can rebuild your firmware. Now from this moment you can do flashing, means press download (which means in fact flash) and connect the phone

OK I got as far as the RAM test but it sits at "0% waiting". I'm guessing it hasn't picked it up on the COM ports. Any ideas how to get around this?

sav25 said:
OK I got as far as the RAM test but it sits at "0% waiting". I'm guessing it hasn't picked it up on the COM ports. Any ideas how to get around this?
Click to expand...
Click to collapse
do not tell me you have W10!!! and don't forget, a reboot makes the job

Golem_ said:
do not tell me you have W10!!! and don't forget, a reboot makes the job
Click to expand...
Click to collapse
Yeah I'm on W10...is that a bad thing?
Do you mean I should reboot? (the PC or watch?)

sav25 said:
Yeah I'm on W10...is that a bad thing?
Do you mean I should reboot? (the PC or watch?)
Click to expand...
Click to collapse
Man, the watch has to be TURNED OFF, i hope you didn't forget it, maximum you get off battery and put it back. As about W10, I wasn't able to tame yet a flash tool make working in W10, maybe you know it better (switching off certificate check and all that stupid stuff), you don't have around an old good laptop with xp or w7?

Ah that explains it. I only have Windows 10. Let me look into disabling certificates. Thanks

sav25 said:
Ah that explains it. I only have Windows 10. Let me look into disabling certificates. Thanks
Click to expand...
Click to collapse
Hope that before anything you load a scatter (cfg) file

Golem_ said:
Hope that before anything you load a scatter (cfg) file
Click to expand...
Click to collapse
Ok so I managed to disable driver signature checks and run the RAM test, it worked! here's a screen shot. I'll now work on the next part.

I've got to the next step re the 5 steps on the link you shared, but the address that defaults in FlashTool is not what was expected:
Shall I just go ahead with these settings?

Ok I had a go anyway. I did one file without changing the setting, and the next file changing the second address field to 0x00800000.
I have attached a zip of both files. ROM_DZ is the first one (no address change) and ROM_DZ_2 is with 0x00800000 entered.
(I know my phone isn't a DZ model but wanted to follow instructions :laugh
What happens now?
Thanks

sav25 said:
Ok I had a go anyway. I did one file without changing the setting, and the next file changing the second address field to 0x00800000.
I have attached a zip of both files. ROM_DZ is the first one (no address change) and ROM_DZ_2 is with 0x00800000 entered.
(I know my phone isn't a DZ model but wanted to follow instructions :laugh
What happens now?
Thanks
Click to expand...
Click to collapse
You did very well man! now wait for me to confirm you have a solid ROM dump and to rebuild from it your original firmware. Then I will check if your firmware is primary compatible with the project and if everything is ok you can start change watch faces by your taste in the matrix file and flash it in your phone

So, everything is fine, here - link - you get your original firmware, extracted from the ROM dump you made, keep it somewhere in safe, if anything goes wrong in your flashing adventure you come back to this firmware and your watch will be like new
Now get back to the first files I gave you, the project firmware (hope you got them already) W300GG_02C_WATCH - MOD WF FULL, for the beginning flash it in your watch (choose scatter file from project firmware, press download and connect the phone), in this way you'll understand what's the catch, instead watch faces and preview watch faces you'll find markers. Now, that you understood the trick go back to computer, open Mtk_Res V1.3 ( here you find a brief tutorial about) and start to change the markers you find with watchfaces from mobile plus - full set new watch skins archive I've sent you initially, be attentive, 240x240 are for watchfaces and 150x150 are for preview ones. Once you think is ready save it as in tutorial and after flash it in your watch - and TADA! New watchfaces for your watch!
Before anything, do a copy of W300GG_02C_WATCH - MOD WF FULL firmware and keep it in safe, you'll have need for next time when you'll want another set of watchfaces on your phone!
Keep me informed about how things are going

no.1 d6 android 5.1 new smartwatch

i thought that they will upgrade the D5 but this one is not even looks like the D5.
http://en.001phone.cn/product-no-1-d6-smart-watch-122.html
https://www.youtube.com/watch?v=jr_yibcKoYs&feature=youtu.be
the straps look removable.
1gb ram and 8gb storage that is nice.
micro sd card slot - yes
i got used to round display but i said that if a new no.1 watch will come out i will consider it. it is just too many great watches :\

Looks very attractive. Will keep my eyes on it

soniasophie9697 said:
i thought that they will upgrade the D5 but this one is not even looks like the D5.
http://en.001phone.cn/product-no-1-d6-smart-watch-122.html
https://www.youtube.com/watch?v=jr_yibcKoYs&feature=youtu.be
the straps look removable.
1gb ram and 8gb storage that is nice.
micro sd card slot - yes
i got used to round display but i said that if a new no.1 watch will come out i will consider it. it is just too many great watches :\
Click to expand...
Click to collapse
Most of the companion watches have removable straps

cyrux75 said:
Most of the companion watches have removable straps
Click to expand...
Click to collapse
i have'nt noticed that it does'nt have 3g and gps:\ that is like the i3, not for me.

No1 D5 Smart Watch
Hi, can you please help me with my No1 D5. I have the standard watch faces the came with the watch. My question is: where can I get the download app or ask to download all the new watch faces e.g.: Rolex, Omega, Bulova Bulova etc: I have watched all Youtube No1 D5 Tutorials but none of them can tell you. Kind regards Rod. [email protected]

Superrod6 said:
Hi, can you please help me with my No1 D5. I have the standard watch faces the came with the watch. My question is: where can I get the download app or ask to download all the new watch faces e.g.: Rolex, Omega, Bulova Bulova etc: I have watched all Youtube No1 D5 Tutorials but none of them can tell you. Kind regards Rod. [email protected]
Click to expand...
Click to collapse
it is easy to do just go to : https://plus.google.com/u/0/communi...2/stream/19c30560-6623-434f-9e61-14edf6033b92
and also from here: http://forum.xda-developers.com/sma...es/clockskin-extracted-1-d5-firmware-t3295297
any qusetions you have you can ask there.

it seems that we have another watch which looks like the k8 (not the round)
http://www.aliexpress.com/item/Fino..._9&btsid=c70ec11b-dc5b-41df-9df6-c406a3682223
i think this watch has the capability to answer calls and messeges from the watch.

soniasophie9697 said:
it is easy to do just go to : https://plus.google.com/u/0/communi...2/stream/19c30560-6623-434f-9e61-14edf6033b92
and also from here: http://forum.xda-developers.com/sma...es/clockskin-extracted-1-d5-firmware-t3295297
any qusetions you have you can ask there.
Click to expand...
Click to collapse
Hi, I tried the first one and all I got was static watch faces. I am not that clever or am I doing something wrong. I downloaded the first watch faces and copied them to a folder called ClockSkins and the results were still pictures the I did the second and it was the same. Please help me through this frustrating thing. Rod.
---------- Post added at 12:08 PM ---------- Previous post was at 11:57 AM ----------
cyrux75 said:
Most of the companion watches have removable straps
Click to expand...
Click to collapse
Hi, can you please help me with my No1 D5. I have the standard watch faces the came with the watch. My question is: where can I get the download app or ask to download all the new watch faces e.g.: Rolex, Omega, Bulova Bulova etc: I have watched all Youtube No1 D5 Tutorials but none of them can tell you. Kind regards Rod Ps I do not want clockskins I just want clock faces.
from
Quote:
Originally Posted by soniasophie9697
it is easy to do just go to : https://plus.google.com/u/0/communit...1-14edf6033b92
and also from here: http://forum.xda-developers.com/smar...mware-t3295297
any qusetions you have you can ask there.
Hi, I tried the first one and all I got was static watch faces. I am not that clever or am I doing something wrong. I downloaded the first watch faces and copied them to a folder called ClockSkins and the results were still pictures the I did the second and it was the same. Please help me through this frustrating thing. Rod.

Superrod6 said:
Hi, I tried the first one and all I got was static watch faces. I am not that clever or am I doing something wrong. I downloaded the first watch faces and copied them to a folder called ClockSkins and the results were still pictures the I did the second and it was the same. Please help me through this frustrating thing. Rod.
Click to expand...
Click to collapse
you copy the zip to your pc and extract it and you create a clockskin folder on your watch and you copy only folders from the zip that have inside them only items and not more folders. zip - folder - items.
you copy the folder that has the items to the clockskin folder that you created on the watch.
if: zip - folder - folders - items -- than you copy the folders.

Hi, thanks for the email but I have the old first ones. I would like the Rolex, Omega ones which are the new 100+ones. Rod.

Superrod6 said:
Hi, thanks for the email but I have the old first ones. I would like the Rolex, Omega ones which are the new 100+ones. Rod.
Click to expand...
Click to collapse
look through the links i gave you and you'll find what you're looking for.

soniasophie9697 said:
you copy the zip to your pc and extract it and you create a clockskin folder on your watch and you copy only folders from the zip that have inside them only items and not more folders. zip - folder - items.
you copy the folder that has the items to the clockskin folder that you created on the watch.
if: zip - folder - folders - items -- than you copy the folders.
Click to expand...
Click to collapse
Hi, where are the zip files . Rod

Superrod6 said:
Hi, where are the zip files . Rod
Click to expand...
Click to collapse
https://plus.google.com/u/0/communi...2/stream/19c30560-6623-434f-9e61-14edf6033b92
every zip files are here just download them to your computer and follow the steps i've written.

Broken Clock Skins
There are differences between the ClockEngine on round and square watches. I've posted this to the Square G+ community for discussion and resolution to help with overall watch face design:
https://plus.google.com/+SmartWatchTicks/posts/XLzy3C9CSVd
Your assistance would be appreciated.
Thanks

newbie
I'm a newbie here, coming over from android wear watches, and trying to learn about these full-android watches. I'm looking at the No. 1 D6 because of the screen real estate, but I'm not sure if there are any sites with watches designed for square android watches? Can anyone steer me to places to look for quality square watches? Also, will most round watch faces run on square watches? I know that some of the images that are named with a dot in front of the name won't show up, but I mean in general?

Display flickering
Hi ! I bought D6 in june 2016. I was using it for a while. One day I wanted to charged switched off watch, but it wasn´t responding. I ignored it, left if on my table... When I tried to charge it again after 2 weeks it works. BUT display sometimes flickers - slowly, then faster and faster and then screen goes black for a second or two without turning off. So the watch is active, but you can´t see anything... It is annoying. I found out that it happens more often when brightness of display is low. Pushing the power button helps, but not all the time - sometimes you just need to wait untill it comes back to normal or restart smartwatch.
I also tried this: Go to Developer options >> Drawing Section or Rendering Section >> Find "Turn off hardware overlays" or "disable hardware overlays" >> This will force the smartwatch to always use GPU for screen adjustments - no more flickering.
---it helped, but still there is f****** FLICKERING sometimes.
So I checked also "Force use of GPU for 2d drawing"
STILL FLICKERS... like damaged neon light...
I thought that it may be battery problem but It says that battery is loaded...
Do any of you know what the problem is ? PLEASE HELP. I dont have money to sent it back to China or wherever they want me to... Thanks.

Connect to pc,download the latest firmware re-flash it.http://en.001phone.cn/download-50.html

Display flickering
I did wireless update... it says now "my system is currently up to date". But when display brightness is low, flickering occurs anyways.

Smith 001 means that you flash the firmware completely new. If you downloaded you find inside flashtool and how to do it. Thats not the same as OTA.
Gesendet von meinem SM-N920C mit Tapatalk

rockabilly said:
Smith 001 means that you flash the firmware completely new. If you downloaded you find inside flashtool and how to do it. Thats not the same as OTA.
Gesendet von meinem SM-N920C mit Tapatalk
Click to expand...
Click to collapse
rockabilly fine... I did it today and it did not help at all. I mean, you can get used to this... but why would you ?
There is still flickering, mostly when brightness is low... but I want it low ! - battery last longer.... Thank you for advices... other ideas ?

I Need DT No.1 Face Design Program

Hi,
I am a DT NO.1 DT3 Pro user. (https://www.dtno1.com/business-smartwatch/dt3pro.html)
RTK8762D chip is used in this watch. Android app "WearPro". The faces are kept in files with the extension "bin". I want to design faces for this watch myself. How can I do that?

Hi,
I've a DT 79
I can't even install new watchfaces from the wearpro app the option is just not there.
Can you help me with that ?

I have a la10 with identical chip but under ffit app. but it have a ".bin" watchfaces too. I have a figure out how to make and upload watchfaces, m.b. it's compatible, but I need at least check any wf of your watch. link me any and I'll check it.

Of course, I am attaching *.bin files of some faces.

sorry, but structure is different.

As I know we can not direct add watchface to DTNO.1 smartwatch, but we can join their official facebook, share your watchfaces idea there.

vxsw said:
I have a la10 with identical chip but under ffit app. but it have a ".bin" watchfaces too. I have a figure out how to make and upload watchfaces, m.b. it's compatible, but I need at least check any wf of your watch. link me any and I'll check it.
Click to expand...
Click to collapse
I would like to try on my Chinese one

the_cipo said:
I would like to try on my Chinese one
Click to expand...
Click to collapse
ok. I'll post it https://forum.xda-developers.com/t/...face-structure-direct-connect-via-bt.4502303/

yerbakili said:
Of course, I am attaching *.bin files of some faces.
Click to expand...
Click to collapse
Please how to add this files to m'y DT3 pro max
And How to create bin watchfaces