Whats the best ROM for USB audio to work flawlessly. My nexus 7 needs to be nothing but the head unit of my car hooked up to my fiio e10 USB DAC which will go to the amps of my car. Usb audio isn't working yet. Link me to the best ROM and kernel to do this please?
outputs
Is there such a thing? I thought that the nexus 7 had no outputs of any kind..
badge 214 said:
Is there such a thing? I thought that the nexus 7 had no outputs of any kind..
Click to expand...
Click to collapse
You need an otg cable. The only way it works is if I reboot the tablet with the otg hooked up to my Fiio E10 USB DAC. Ifni unplug the otg then my tablet freezes every time. It does that with my USB flash drive as well. I can't even access files on my flash drive. It sees the drive but it shows no files at all.
Bump. I need usb hot plug.
Hi, I have an asus TF300TL an I have a hdmi to rca cable to connect to my tv.
At my Tablet don't activate the hdmi out so i need to activate it manually. There are a way to do it on android?
Thx
What kind of an adaptor do I need to connect my nexus 10 to my TV (it's an older TV, not flat screen, not HD. I don't care about losing the HD, just the size.)
Thanks!
Micro HDMI to HDMI, DVI, or maybe even Component (not 100% sure on that). If the TV doesn't have any of that, then you'll likely need an Analog converter to go from HDMI to VGA, Composite, or RCA.
espionage724 said:
Micro HDMI to HDMI, DVI, or maybe even Component (not 100% sure on that). If the TV doesn't have any of that, then you'll likely need an Analog converter to go from HDMI to VGA, Composite, or RCA.
Click to expand...
Click to collapse
How can I find out which?
newperson1 said:
How can I find out which?
Click to expand...
Click to collapse
Check your TV. If it has HDMI, you want micro-HDMI to HDMI. If it doesn't have HDMI, but does have DVI, you'll want that.
If it has neither HDMI nor DVI, you'll need a new TV Or an HDMI to analog converter.
Nexus 10 to CRT TV connection
I have a nexus 10 tablet running stock 4.4.2. I bought an hdmi to rca converter from amazon.com and a micro hdmi to hdmi cable so that I could hook up the tablet to my old sharp crt tv. When I plug in the connections I am seeing a stripe coloured screen that says 'no signal ntsc'. when i turn the switch on the converter to pal it says 'no signal pal'. Could you tell me why this is happening and if anything could be done so that I can see the content from my tablet on my tv? Do I need any software/app installed to make this work? The only ports on the tv are the composite rca ones. I know the tv is old but its its 55 inches and in perfect working condition so I really don't want to purchase another so please if there is anything you know that would help I would be more than greatful.
My setup: the microhdmi to hdmi cable plugged into the micro hdmi port on the tablet, then the rca cable connects to the back of the tv and the rca ports on the converter. Should work?? Help me please. Thanks in advance.
I have a Google ethernet adapter from a Chromecast and I figured it should work with my Fire TV stick 4K (2018). It does not, the wired connection does not show up in the Fire TV stick settings. Not sure what the problem is.
Anyone had any luck using the Chromecast ethernet adapter with (any) Fire TV? From what I read the chipset is very common so the drivers should be there. Maybe the adapter doesn't provide enough power? It's spec'ed at 850mA.
I ended up getting the official Amazon ethernet dongle and that works fine. Was hoping to repurpose the Google ethernet adapter as I have no other use for it, but it doesn't seem to work.
i have the exact same issue.. im going to a try a usb-c docking station i have laying around before i bite the $15 bullet
Hi All,
Have you had any luck with OTG + Charge adapters?
Some back ground
The purpose for my Fire HD 8 is to be a multimedia device for my car.
I also got a CarLinkit device which (paired with an app) enables me to use the tablet as an Carplay/andorid auto device no root needed.
The only problem that i have atm is that after reading review on OTG+Charge adapters on Amazon it seems like the Tablet decides to either charge OR enable OTG, NOT BOTH (I'm assuming that its because the tablet has to output some voltage to the otg device to power it.)
Let me know if you had any luck and if you did perhaps some links to the adaper you are using?
Thanks.