I used so flash tool and installed files on this site
Worked fine until I started the device.
Clicked begin 3 times then goes to camera?
Push back goes to begining of start ?
What did I do wrong
update after first screen went to vision settings. large display. went back then it came on and all works great! now time to put it in the fixed box and on to the next
love this site!!!!!
Related
Hello. I bought second hand o2 atom life few days ago, and it worked fine. It worked perfect! then i didn't like the sound of the speakers and i saw that it has been opened before and I decided to open it and see if the speakers are on their places. everything was fine, i tightened all the screws and i turned it on and voala! It entered automaticaly into boot loader mode and shows the typical text when u want to change the ROM. I downloaded few roms tried to install them, everything starts perfect goes to 100% reboots and repeats the same... what should I do?? I just opened it and put it all together again! HELP! 10x
speedermarto said:
Hello. I bought second hand o2 atom life few days ago, and it worked fine. It worked perfect! then i didn't like the sound of the speakers and i saw that it has been opened before and I decided to open it and see if the speakers are on their places. everything was fine, i tightened all the screws and i turned it on and voala! It entered automaticaly into boot loader mode and shows the typical text when u want to change the ROM. I downloaded few roms tried to install them, everything starts perfect goes to 100% reboots and repeats the same... what should I do?? I just opened it and put it all together again! HELP! 10x
Click to expand...
Click to collapse
You have to use a "EMPTY FAT FORMATTED MINISD CARD" to flash the rom.
try format you card again and and put in only 1 ROM image and do it again.
Hi,
I bought HTC HD2 TMOBILE from ebay and got it delivered yesterday. When i checked the phone it was working fine and it was a locked piece. Today morning i got the unlock code and the phone started working fine. I was just going through the features and checked the setting and stuff. Suddenly in 15-20 mins the phone restarted itself to the white pink screen of stick together. I thought its normal and gave it like 10-15mins to boot. Nothing happened. Had to take off the battery and tried booting it n still no response. I did a hard reset. Still the white n pink screen forced me to see the lame stick together msg. after a few resets the phones booted up and gave me the windows first time usage screen. I set it up and then bam! again it restarted to the stick together screen. i noticed tht it doesnt even shows the rom etc etc info on tht screen like it used to the first time.
Steps i have already tried...and none worked
1) hard reset
2) soft reset
3) reset with no sim mem card
4) flash tmobile latest rom from their own website ( tht screwed things even more as update failed at 8% and then the stick together screen disappeared and SOFTWARE UPDATE FAILED screen poped up )
5) Tried the HSPL3 to changed it to 2.08 HSPL ( tht got the stick together screen and nothing else )
6) flashed custom rom ( after multiple attempts it allowed me to complete update and after successful update the stick together screen appeared )
7) now i have reverted back to 2.08 thru hspl3. got back the stick together screen.
What can be done and why did this happen when i was just checking the settings?
IMPORTANTLY how can i fix this...
Check the battery contacts. My friend had a similar thing where only the wirth boot screen showed and it ended up being the battery contacts.
jaszek said:
Check the battery contacts. My friend had a similar thing where only the wirth boot screen showed and it ended up being the battery contacts.
Click to expand...
Click to collapse
+1
This is a very common occurence on this phone...the little gold pins get bent easily and the constant rebooting is one of the main symptoms when that happens.
hmmmmmmmmmm i will try tht now... was keeping myself away from it as it has already eaten up half of my only holiday in this week...
you are a genius
my girlfriend thought she bricked her phone cuz it was stuck on the stick together screen......see was about to try to flash thr original stock rom when i happened upon this post and it saved us alot of time ......so i just want to say thank you so much
So my screen has a colourisation problem - everything appears yellowish. I originally tought this was a contact issue, though now I'm not so sure.
I can sort of live with it, as I mainly use it to mess around with. Anyway, last night I took the phone back to stock, HSPL'd (2.08 iirc) installed a radio, installed cLK, then Clockworkmod, then Cyanogenmod. When I was messing around in CyanogenMod I noticed that the Google search widget flashed the right colour (White as opposed to yellow. On further inspection, I found that if i went into the browser and viewed the Page Info, the browser window turned white. I flashed back to the latest stock via SD card. I booted up into WinMo6.5 and the colour issue was still there. I went into the browser, pressed the menu button and sure enough, the window in the back ground when to the colours it should be. Anyone have any idea?
PS. I'll post a video this afternoon.
Hi, I had that problem 6 months ago. The screen turned yellowish sometimes but not always. I tried deinstalling & reinstalling stuff but it didn't help. Restarting the phone helped but for a short time. A few weeks later it went worse, blue horizontal lines started to appear now & then. I went back to the shop where I bought it for repair and 2-3 weeks later I had it back. They told me that the main circuit board had to be replaced.
So if you see the same blue lines appear, you know it's a hardware problem.
Hope this helps.
Sent from my HTC HD2 using XDA App
1) It started black screen when I was upgrading to Mango with Zune.
When restart phone and the phone could not boot up ,just into black screen.
2)The phone can enter into Download Mode(Vol up + Camera + Power).
Even I tried to flash I8700XENJK1 with Downloader 7.03, everything looks good , processing bar, success message. The only things was when finished flashing, the phone restarted and booted up into black screen and nothing could be done then.(Downloader 7.14 also tried)
3)trying Device_Update_Support_Tool_for_OMNIA7_KC3_Ver1.2.exe which runs well and no error but when came to restart phone, it still went into black screen.
4)In the black screen, I can not access Download Mode except putting out of the battery and put in again which probably means power is on in black screen.
I am not sure which problem causes this, Flash, CPU or other things. Please help me out of these troubles.Thanks.
How long did you leave it out of interest?
Mine sat at a black screen when rebooting for a good 5 minutes or so...
Freypal said:
How long did you leave it out of interest?
Mine sat at a black screen when rebooting for a good 5 minutes or so...
Click to expand...
Click to collapse
I think when I used the Downloader 7.03 tools, there was a message of waiting for several minutes after flashing.
Beside I wait more than 10 minutes, and nothing changed.
Thanks anyway
benaustin said:
I think when I used the Downloader 7.03 tools, there was a message of waiting for several minutes after flashing.
Beside I wait more than 10 minutes, and nothing changed.
Thanks anyway
Click to expand...
Click to collapse
Sorry dude, hope you get it sorted though!
Hoping for someone can help me.
When I went RTM from NoDo, I got a black screen that seriously was there for like half an hour..I put it down to my laptop being like 7 years old and nearly dead, and just left it alone, done nothing else on it and it eventually finished the update.
When I flashed on my mates computer back to NoDo, it was the quikest thing I had ever seen - updated back to mango and the black screen was there for like a minute.
The problem is, when you pulled it the first time, you really should have left it, I would have for at least an hour. I hope you haven't completely bricked your phone
Spookidoodles said:
When I went RTM from NoDo, I got a black screen that seriously was there for like half an hour..I put it down to my laptop being like 7 years old and nearly dead, and just left it alone, done nothing else on it and it eventually finished the update.
When I flashed on my mates computer back to NoDo, it was the quikest thing I had ever seen - updated back to mango and the black screen was there for like a minute.
The problem is, when you pulled it the first time, you really should have left it, I would have for at least an hour. I hope you haven't completely bricked your phone
Click to expand...
Click to collapse
First, thanks for sharing your update experience.
I have updated the phone several times without black screen once.So when black screen came out, I noticed there are something wrong.
Atfer this happen, I tried flash different version ROM, waiting for a long time.
Now I am hopefulless except some new flashing tools or new rom.
Hey everyone,
last week my s10+ screen turned half white when i was outside with my dog.
It started a couple months ago with a black spot on the left of my screen. I thought it wasn't a big problem as it wasn't in the middle of the screen.
Last week I was taking a walk with my dog, I checked my phone for a football match kickoff time and put the phone back in my pocket. I later checked my phone again and noticed half of my screen was white.
The screen did react to swiping and even the fingerprint scanner worked. I went to KPN (which is the phone carrier I use) and explained the whole situation. They told me I had to reset my phone to factory settings. When I got home I tried to reset my phone however when I pressed the reset button my phone would just restart without deleting anything. So after a bit of googling I tried flashing stock firmware. I made sure it was the latest one and made sure it was for my phone. The flashing finished but now my screen doesnt work at all. I tried the booting into download mode methods however I cant get any screen output ever since I flashed that stock firmware. The phone does vibrate when I start it up and it does connect to my pc.(S10 folder pops up, but its empty) I also tried ADB however the phone doesnt show in the devices list. (probably because USB-Debugging has somehow turned off). I did root my device with magisk a couple months ago and i'm afraid I somehow bricked it when i tried flashing stock firmware on it.
Is there any way for me to get into download mode to try another stock firmware?
Note: I dont have any screen output at all, so I have to do everything blindly.