Related
Hello guys !!
I just bought an S7 edge (please the device is not stolen I have the note)
*** It was in version 6.0, it appeared as soon as I connected the same on wifi, I received an update notification for 7.0
** After the update, my chip is showing "not registered on the network", but has signal, the imei is being recorded, until my number is detected in the settings.
but I can not make calls.
*** In order to recover the phone, I downloaded TW recovery here, and installed a 7.0 by recovery.
This: 935F-2DRC6_ver2.zip (I can not find the link from it, but it was downloaded from here right from xda) it has root.
even so, I can not make calls.
I tried to go back through Odin to 6.0, but when I select BL, the flash aborts with error, ("SW REV CHECK FAIL: [system] Fused 2> Binary 1")
And if I flash without BL, but adding all others, I have bootloop, and I no longer have recovery, not even the original.
I need to get it back to 6.0, please help me ...
==========================================================================================
I am in Brazil, I will leave the same text in Portuguese, if you help someone to better understand my problem.
"Eu acabei de comprar um S7 (nota fiscal, por favor, o aparelho não é roubado eu tenho a nota)
Ele estava na versão 6.0, apareceu assim que conectei o mesmo na wifi, recebi uma notificação de atualização para o 7.0
Após o update, meu chip está mostrando "não registrado na rede", mas tem sinal, o imei está constando, até o meu numero é detectado nas configurações.
mas eu não consigo fazer chamadas.
Na intenção de recuperar o telefone, baixei aqui TW recovery, e instalei uma 7.0 pelo recovery.
Esta: 935F-2DRC6_ver2.zip (eu não consigo encontrar o link dela, mas foi baixada daqui mesmo do xda) ela tem root.
mesmo assim, não consigo efetuar ligações.
Eu tentei voltar pelo Odin para a 6.0, mas quando seleciono BL, o flash aborta com erro, ("SW REV CHECK FAIL : [system]Fused 2 > Binary 1")
E se eu flash sem BL, mas adicionando todos os outros, eu tenho bootloop, e não tenho mais o recovery, nem mesmo o original.
eu preciso voltá-lo para a 6.0, me ajudem por favor..."
leonardoaraujo said:
Hello guys !!
I just bought an S7 edge (please the device is not stolen I have the note)
*** It was in version 6.0, it appeared as soon as I connected the same on wifi, I received an update notification for 7.0
** After the update, my chip is showing "not registered on the network", but has signal, the imei is being recorded, until my number is detected in the settings.
but I can not make calls.
*** In order to recover the phone, I downloaded TW recovery here, and installed a 7.0 by recovery.
This: 935F-2DRC6_ver2.zip (I can not find the link from it, but it was downloaded from here right from xda) it has root.
even so, I can not make calls.
I tried to go back through Odin to 6.0, but when I select BL, the flash aborts with error, ("SW REV CHECK FAIL: [system] Fused 2> Binary 1")
And if I flash without BL, but adding all others, I have bootloop, and I no longer have recovery, not even the original.
I need to get it back to 6.0, please help me ...
==========================================================================================
I am in Brazil, I will leave the same text in Portuguese, if you help someone to better understand my problem.
"Eu acabei de comprar um S7 (nota fiscal, por favor, o aparelho não é roubado eu tenho a nota)
Ele estava na versão 6.0, apareceu assim que conectei o mesmo na wifi, recebi uma notificação de atualização para o 7.0
Após o update, meu chip está mostrando "não registrado na rede", mas tem sinal, o imei está constando, até o meu numero é detectado nas configurações.
mas eu não consigo fazer chamadas.
Na intenção de recuperar o telefone, baixei aqui TW recovery, e instalei uma 7.0 pelo recovery.
Esta: 935F-2DRC6_ver2.zip (eu não consigo encontrar o link dela, mas foi baixada daqui mesmo do xda) ela tem root.
mesmo assim, não consigo efetuar ligações.
Eu tentei voltar pelo Odin para a 6.0, mas quando seleciono BL, o flash aborta com erro, ("SW REV CHECK FAIL : [system]Fused 2 > Binary 1")
E se eu flash sem BL, mas adicionando todos os outros, eu tenho bootloop, e não tenho mais o recovery, nem mesmo o original.
eu preciso voltá-lo para a 6.0, me ajudem por favor..."
Click to expand...
Click to collapse
Not sure why the update would knock you phone off the network. When you say " it doesn't show the number" are you talking about your IMEI or phone number? The error you are getting from odin maybe because you are a higher binary now, you cannot downgrade the binary.
Go to settings, about phone and signal, do you see your phone settings populated in there?
Fear_The_Fluff said:
Not sure why the update would knock you phone off the network. When you say " it doesn't show the number" are you talking about your IMEI or phone number? The error you are getting from odin maybe because you are a higher binary now, you cannot downgrade the binary.
Go to settings, about phone and signal, do you see your phone settings populated in there?
Click to expand...
Click to collapse
yes!!
I see my phone number, I see my correct imei, and when I select to search for networks, he finds them all.
but when I select my carrier, or any other, I have the information:
"Not registered on the network, please try again later"
thanks!!
sound estrange
Does anyone confirm something for me?
when I rock my G935f back and forth, I hear a noise, like a disconnected connector, I need someone to test me, I think the antenna connector is disconnected ..
please..
I found that the device is foreign, it is not the version that comes to Brazil, I need help, please,
Does anyone guide me how to back my smartphone to 6.0 via odin?
I tried several but I do not have the original recovery anymore, after I installed twrp, no rom stock (via odir), boot, and I can not access the original recovery anymore, being forced to install twrp again and install a custom one. .
help me.....
I'm from Brazil as well, and I have the same problem. I even paid people on the web from places like like "Mercado Livre" (Brazilian eBay) to do a fix, but nothing worked, still have the phone not working with me....
So sad....
Download z3x pro cracked and root then patch cert on box and enjoy
Hello,
i got this unit yesterday from the seller autoradio-1001.
It is equipped with a dvd drive above the screen.
SO far it is working, but getting high temperatures by stock cooling (45°C inside / 100°C cpu in idle) whilst having 32°C outside temp.
The board is soldered and not changeable.
It is labeled RD-F1.8-MB-1.5FD+1.5GD-V00.
MFD is 2017-10-28
Attached are some pictures of the board (took from outside through fan opening), and the "Raise" canbus adaptor.
Second post will be some pictures of "about" in settings.
Please note - it is for honda civic hatchback 2015.
Maybe you can help me identify which rom i can try and which root should work (risky, as i dont have any stock rom backup / full nand backup)
?
Best regards,
hashtowent
Here are some photos of the settings/about tab of my unit:
Regarding factory settings, i tried most known passwords: 3387 - 3386 - 126 - 0000 - 00000 - 000000 - 123456 - 8888 -
i would be glad for further hints on possible passwords or ways to enter without entering the password. (shortcut master doesnt work, just canbus setting did work with it)
thank you all!
Interestingly, there is a seller (MotorOne) here in South America using this MCU too. It's using Android 8.1. Had you tried any 9 version?
Hello,
Looks like I have unit with same board. It is made by XRROSS , my model number is X7510A8P5S4-UP.
i cant find password to access factory settings. I was thinking about changing firmware but I don't want to brick this unit.
Did you guys had any luck with this
Had you tried 13248756 ?
Sorry it didn't work
rael_gc said:
Curiosamente, há um vendedor (MotorOne) aqui na América do Sul usando este MCU também. Ele está usando o Android 8.1. Você tentou alguma versão 9?
Click to expand...
Click to collapse
Tenho uma unidade com essa MCU M1 também. A minha fica travada no boot da logo android. Já tentei de tudo e até agora nada.
Wiharlley said:
Tenho uma unidade com essa MCU M1 também. A minha fica travada no boot da logo android. Já tentei de tudo e até agora nada.
Click to expand...
Click to collapse
Também estou com esse mesmo problema!!!
Does anyone have the TP69EA MCU files
Inglés traductor:
Hello good day. I tell you that I bought a new Chinese Android radio for my vw, but recently I am having trouble configuring the canbus, to adapt the commands to the steering wheel. I try to enter the "factory settings", I put the password "8888", then I try to access "protocol setting, and it bounces back.
Stereo information:
android: YT9218DH_ADH
system: 10.1
XY AUTO: 1.1 (8227L)
display: 1024 * 600
mcu1: 3.1 (8227L)
cpu: A7 1.3GHZ X4
flash:32G
DDR:2G
Can bus decoder: Raiser for: all vw, skoda, seat cars
aida 64:
Model: YT9260
brand: alps
Device: 8227L_demo
Español :.
Hola, buenos días. Les cuento que comprado una nueva radio china Android para mi vw, pero recientemente estoy teniendo problema para configurar el canbus, para adaptar los comandos al volante. Intento ingresar a la "configuración de fábrica", pongo la contraseña "8888", luego intento acceder a "protocol setting, y me rebota para atras.
Informacion del estereo:
android: YT9218DH_ADH
sistema: 10.1
XY AUTO: 1.1 (8227L)
display: 1024*600
mcu1: 3.1 (8227L)
cpu: A7 1.3GHZ X4
flash:32G
DDR:2G
Can bus decoder: Raiser for: all vw, skoda, seat cars
aida 64:
Modelo: YT9260
marca: alps
Dispositivo: 8227L_demo
View attachment 5255095
Demostración de lo que me sucede:
problem demonstration:
A alguien le ha pasado lo mismo? Cualquier sugerencia es bienvenida. Muchas gracias
Someone has been the same? Any suggestion is welcome. Thanks a lot
Is the canbus decoder plugged in right if so try and disconnect battery for a few seconds and reconnect if that doesnt help ask the seller if they can send you a new canbus decoder
I have the same problem and still can’t find an answer to it...
Extrucker11 said:
Is the canbus decoder plugged in right if so try and disconnect battery for a few seconds and reconnect if that doesnt help ask the seller if they can send you a new canbus decoder
Click to expand...
Click to collapse
Yes, everything is correctly connected. Everything was working fine, until I factory reset the android settings. after I restored the factory settings it stopped working.
Sí, todo está conectado correctamente. Todo funcionaba bien, hasta que restablecí la configuración de Android de fábrica. después de restaurar la configuración de fábrica, dejó de funcionar.
RichardBaldwin said:
I have the same problem and still can’t find an answer to it...
Click to expand...
Click to collapse
still haven't been able to solve it?
Nope, I’m at the point where I think the canbus box is knackered.
xenzoenzox said:
Yes, everything is correctly connected. Everything was working fine, until I factory reset the android settings. after I restored the factory settings it stopped working.
Sí, todo está conectado correctamente. Todo funcionaba bien, hasta que restablecí la configuración de Android de fábrica. después de restaurar la configuración de fábrica, dejó de funcionar.
Click to expand...
Click to collapse
This is literally what happened with mine.
Having same issue in mine MTK YT9216CJ after upgrade to 9.1, Reset multiple times but not able to access Canbus or protocol settings. Any suggestions would be helpful to fix. Removed and reconnected canbus wiring but no help.
I think it’s a case of getting updated software, but there isn’t an easy go to place for the software.
xenzoenzox said:
Traductor de ingles:
Hola buen día. Les cuento que compré una nueva radio Android china para mi vw, pero recientemente me cuesta configurar el canbus, para adaptar los comandos al volante. Intento ingresar a la "configuración de fábrica", pongo la contraseña "8888", luego trato de acceder a la "configuración del protocolo" y se recupera.
Información estéreo:
Android: YT9218DH_ADH
sistema: 10.1
XY AUTO: 1,1 (8227L)
pantalla: 1024 * 600
mcu1: 3,1 (8227L)
CPU: A7 1.3GHZ X4
flash: 32G
DDR: 2G
Can bus decodificador: Raiser para: todos los coches vw, skoda, seat
aida 64:
Modelo: YT9260
marca: Alpes
Dispositivo: 8227L_demo
Español :.
Hola buenos dias. Les cuento que comprado una nueva radio china Android para mi vw, pero recientemente estoy teniendo un problema para configurar el canbus, para adaptar los comandos al volante. Intento ingresar a la "configuración de fábrica", pongo la contraseña "8888", luego intento acceder a "configuración de protocolo, y me rebota para atras.
Información del estereo:
Android: YT9218DH_ADH
sistema: 10.1
XY AUTO: 1,1 (8227L)
pantalla: 1024 * 600
mcu1: 3,1 (8227L)
CPU: A7 1.3GHZ X4
flash: 32G
DDR: 2G
Can bus decodificador: Raiser para: todos los coches vw, skoda, seat
aida 64:
Modelo: YT9260
marca: alps
Dispositivo: 8227L_demo
[ATTACH = full] 5255095 [/ ATTACH]
Demostración de lo que me sucede:
demostración del problema:
[MEDIA = youtube] -1JGHe4Ex3I [/ MEDIA]
A alguien le ha pasado lo mismo? Cualquier sugerencia es bienvenida. muchas gracias
¿Alguien ha sido igual? Cualquier sugerencia es bienvenida. muchas gracias
Click to expand...
Click to collapse
friends, someone can help me, I have a radio that I buy, the microphone does not work, the microphone is listening too low, people do not hear me and I need an update and I don't know where to download the software or driver to update it, someone could help me this is the information I have
Stereo Information:
Android: YT9216BJ_00012_V001
system: Adroid 10.1
XY AUTO: J6.8 (X2)
CAN BUS: Hiworld Weichi-Old Cruze-v2.22.0-connect
DDR: 1GF Flash: 16G
MCU1: 4.0 (X2)
CPU: A7 1.3GHZ X4
amigos alguien me puede ayudar, tengo una radio que compre no me funciona el micrfono se escuvha demasiado bajo las personas no me escuchan y nesecito una actualización y no se donde descargar el software o driver para actualizarlo alguien podria ayudarme este es la informacion que tengo
Información del estereo:
Android: YT9216BJ_00012_V001
sistema: Adroid 10.1
XY AUTO: J6.8 (X2)
CAN BUS: Hiworld Weichi-Old Cruze-v2.22.0-connect
DDR: 1GF Flash: 16 G
MCU1: 4.0 (X2)
CPU: A7 1.3GHZ X4
Same problem any new help or solutation
I’ve bought a new canbus box and that hasn’t helped…
RichardBaldwin said:
I’ve bought a new canbus box and that hasn’t helped…
Click to expand...
Click to collapse
i think that the problem is software not a hardware problem ..
i'm looking for how to downgrade the software
I’m not sure, I’ve gone through various stages of software and it’s always the same case, even on the original it refused to work.
¿Habéis encontrado la solucion?, tengo el mismo problema
Mod translation: Have you found the solution? I have the same problem
I bought Chinese Android radio with version 11, the steering wheel key was working good, but after a factory reset stop working and I try to setup as before using the app and factory setup but not working, try enter in can setup and choose the car but still not working and then try different car brands but not look, anybody can point me what I have to do?
I started this thread specifically for the K2001Q T3 models.
The T3/T3L has quite a few different firmwares and I am not sure if they can be exchanged and will work properly so I suggest to only load this only models that show K2001Q. The Q stands for Android 10. If you have any other K2001 models, this update will try but not work as changing Android versions can only be done using the .img file and I am not aware of any Android 10 .img file being available as yet.
If you radio shows K2001N but says Android 10, it is showing Fake Android 10 as N is Android 7. You can try this update but it will fail.
To confirm which model you have, go to Apps, Car settings, System settings, System Info. It must say K2001Q. MCUVersion doesn't matter.
I have attached a sample picture. It is also the latest firmware available for this model that I received from the manufacturer. I will post in this thread from now on as the previous thread has the T3 P1 model which this is but the K2001Q seems to be different firmware or has some different chips so might not be compatible with the other firmware. That model has the car settings in the Android settings menu which is completely different.
To update, download the zip file, rename it to update.zip, put it on the root of your flash.
Go to Apps, Car Settings, System settings, System Update. It should say there is an update available and you hit start. Unit will be reset back to factory once done. If the radio had DSP & Car Play, it will still be there when you update.
For changing the launcher (No aftermarket launcher is supported), do the following:
Apps -> Car Settings -> System Settings -> Factory Settings (Password is 16176699) -> Style Settings (Password is 111333). I prefer Style 3.
Car settings has a lot of new stuff. Like Desktop Settings. No idea what it is and I just received this firmware today to it will take time to figure it out. Factory settings -> Customized settings ... has a lot of options. Sleep, Voice control (never tested this), etc. If you need to change something, it will be there.
There are risks updating your radio so please do so at your risk. I did not write this firmware or own it or confirm it will work correctly for you. Try make sure you be as careful when updating as bricking your radio will
mean you will stuggle to fix it as no .img file is available to flash the radio directly.
Latest Stable Update (Given to me 09032023) with a software date of 15112022.
985.45 MB file on MEGA
mega.nz
Latest update now has ZLink5 for units with carplay which supports wireless android auto as well which is nice. And it runs well and fast. Still playing around with it.
Update (20211224):
811.96 MB file on MEGA
mega.nz
New update was given to me on 15/08/2022.
985.95 MB file on MEGA
mega.nz
I have just started testing the above and it will take a few weeks to see if there is any downsides to updating the radio. So far, Radio app is the different version with the circle but it now does save settings when closing and reopening the app.
**Do not update if your radio is not on 1024x800 resolution as the update will cause problems with the unit and it will not display correctly.
914.18 MB file on MEGA
mega.nz
thankyou kavirz!! you have helped many with your knoledge and skill.
can you resend the newest update?----the link is broken Thankyou!
update.zip
4pda.to
Hola, aquí tienes una actualización que tengo y está probada y funcionando bien.
Jose cx5 said:
Hola, aquí tienes una actualización que tengo y está probada y funcionando bien.View attachment 5502695
Click to expand...
Click to collapse
is this the update? the newest update from kavirz is k2001q_JYT
Es una actualización de los compañeros de 4pda. más antiguo. kavirz También estoy esperando un enlace.
descargué la actualización de kavirz y funcionó perfectamente.
Tengo la función de dormir cerrada. ¿Cómo lo haces?
Mandi karshmay said:
thankyou kavirz!! you have helped many with your knoledge and skill.
can you resend the newest update?----the link is broken Thankyou!
Click to expand...
Click to collapse
This is the direct link.
914.18 MB file on MEGA
mega.nz
It is the update dated 25112021 with JYT being the manufacturer.
Jose cx5 said:
descargué la actualización de kavirz y funcionó perfectamente.
Tengo la función de dormir cerrada. ¿Cómo lo haces?
Click to expand...
Click to collapse
So you want to enable sleep function?
Car Settings -> System Settings -> Factory Settings -> 16176699 -> Customized Settings -> Sleep (Have to scroll down quite a bit).
hello quick question.
I tried to connect a bluetooh OBDII to this HW, it is possible to use with apps like :dashcommand?
Srsuri said:
hello quick question.
I tried to connect a bluetooh OBDII to this HW, it is possible to use with apps like :dashcommand?
Click to expand...
Click to collapse
I have seen toolbox allowing the connection to the OBDII but I have only tested Torque Pro.
Yea in the tool box and it pair but doesn’t connect, even with torque pro, also I notice that my physical buttons ar not working :/
Los botones me funcionan, no creo que sea la culpa. Todavía no puedo conectar el obd con ningún apk, ni siquiera torque pro. Combínalo y nada más. Sin apk ni wifi.
Lo que me he dado cuenta es que pierde facilmente la señal del gps. a ti tambien te pasa?
Jose cx5 said:
Lo que me he dado cuenta es que pierde facilmente la señal del gps. a ti tambien te pasa?
Click to expand...
Click to collapse
No, uso CarPlay y si funciona, el tema de OBD no anda
Hi @kavirz, could you please confirm how many different UI's come with this firmware? thanks
Srsuri said:
Yea in the tool box and it pair but doesn’t connect, even with torque pro, also I notice that my physical buttons ar not working :/
Click to expand...
Click to collapse
Physical touch buttons can be programmed in factory settings. Can't remember which one but it can be done from there.
Jose cx5 said:
Los botones me funcionan, no creo que sea la culpa. Todavía no puedo conectar el obd con ningún apk, ni siquiera torque pro. Combínalo y nada más. Sin apk ni wifi.
Click to expand...
Click to collapse
Which version of Torque pro are you using? I use the one from elm327.com. Download the apk and install it. I started Torque pro, then minimized it and went to tool box. Then sync'd it there. Then went back to torque pro and it showed it under bluetooth in the settings. It then connected to the OBD2 and worked fine.
Jose cx5 said:
Lo que me he dado cuenta es que pierde facilmente la señal del gps. a ti tambien te pasa?
Click to expand...
Click to collapse
I have had no GPS issues since the update. I always mount it on the windscreen though and not inside the dash for better signal.
please I kindly request your help, you know that by mistake I uninstalled the miudrive screen application from my k2001n android radio which allows to project the mobile screen towards the radio, but I have not been able to find it for reinstall, I tried to reset to factory settings but the app was definitely deleted, what could I do??? many in advance
please I kindly request your help, you know that by mistake I uninstalled the miudrive screen application from my k2001n android radio which allows to project the mobile screen towards the radio, but I have not been able to find it for reinstall, I tried to reset to factory settings but the app was definitely deleted, what could I do??? many in advance
Paulof195 said:
please I kindly request your help, you know that by mistake I uninstalled the miudrive screen application from my k2001n android radio which allows to project the mobile screen towards the radio, but I have not been able to find it for reinstall, I tried to reset to factory settings but the app was definitely deleted, what could I do??? many in advance
Click to expand...
Click to collapse
Paulof195 said:
por favor peço sua ajuda, você sabe que por engano eu desinstalei o aplicativo de tela miudrive do meu rádio k2001n android que permite projetar a tela do celular em direção ao rádio, mas não consegui encontrá-lo para reinstalar, tentei resetar para as configurações de fábrica, mas o aplicativo foi definitivamente excluído, o que eu poderia fazer?? muitos com antecedência
Click to expand...
Click to collapse
So go into the system settings and check the carplay
Eso entrar nas configuracao sistema e marcar o car play