Help - Samsung Galaxy S7 Edge Questions and Answers

Hello guys !!
I just bought an S7 edge (please the device is not stolen I have the note)
*** It was in version 6.0, it appeared as soon as I connected the same on wifi, I received an update notification for 7.0
** After the update, my chip is showing "not registered on the network", but has signal, the imei is being recorded, until my number is detected in the settings.
but I can not make calls.
*** In order to recover the phone, I downloaded TW recovery here, and installed a 7.0 by recovery.
This: 935F-2DRC6_ver2.zip (I can not find the link from it, but it was downloaded from here right from xda) it has root.
even so, I can not make calls.
I tried to go back through Odin to 6.0, but when I select BL, the flash aborts with error, ("SW REV CHECK FAIL: [system] Fused 2> Binary 1")
And if I flash without BL, but adding all others, I have bootloop, and I no longer have recovery, not even the original.
I need to get it back to 6.0, please help me ...
==========================================================================================
I am in Brazil, I will leave the same text in Portuguese, if you help someone to better understand my problem.
"Eu acabei de comprar um S7 (nota fiscal, por favor, o aparelho não é roubado eu tenho a nota)
Ele estava na versão 6.0, apareceu assim que conectei o mesmo na wifi, recebi uma notificação de atualização para o 7.0
Após o update, meu chip está mostrando "não registrado na rede", mas tem sinal, o imei está constando, até o meu numero é detectado nas configurações.
mas eu não consigo fazer chamadas.
Na intenção de recuperar o telefone, baixei aqui TW recovery, e instalei uma 7.0 pelo recovery.
Esta: 935F-2DRC6_ver2.zip (eu não consigo encontrar o link dela, mas foi baixada daqui mesmo do xda) ela tem root.
mesmo assim, não consigo efetuar ligações.
Eu tentei voltar pelo Odin para a 6.0, mas quando seleciono BL, o flash aborta com erro, ("SW REV CHECK FAIL : [system]Fused 2 > Binary 1")
E se eu flash sem BL, mas adicionando todos os outros, eu tenho bootloop, e não tenho mais o recovery, nem mesmo o original.
eu preciso voltá-lo para a 6.0, me ajudem por favor..."

leonardoaraujo said:
Hello guys !!
I just bought an S7 edge (please the device is not stolen I have the note)
*** It was in version 6.0, it appeared as soon as I connected the same on wifi, I received an update notification for 7.0
** After the update, my chip is showing "not registered on the network", but has signal, the imei is being recorded, until my number is detected in the settings.
but I can not make calls.
*** In order to recover the phone, I downloaded TW recovery here, and installed a 7.0 by recovery.
This: 935F-2DRC6_ver2.zip (I can not find the link from it, but it was downloaded from here right from xda) it has root.
even so, I can not make calls.
I tried to go back through Odin to 6.0, but when I select BL, the flash aborts with error, ("SW REV CHECK FAIL: [system] Fused 2> Binary 1")
And if I flash without BL, but adding all others, I have bootloop, and I no longer have recovery, not even the original.
I need to get it back to 6.0, please help me ...
==========================================================================================
I am in Brazil, I will leave the same text in Portuguese, if you help someone to better understand my problem.
"Eu acabei de comprar um S7 (nota fiscal, por favor, o aparelho não é roubado eu tenho a nota)
Ele estava na versão 6.0, apareceu assim que conectei o mesmo na wifi, recebi uma notificação de atualização para o 7.0
Após o update, meu chip está mostrando "não registrado na rede", mas tem sinal, o imei está constando, até o meu numero é detectado nas configurações.
mas eu não consigo fazer chamadas.
Na intenção de recuperar o telefone, baixei aqui TW recovery, e instalei uma 7.0 pelo recovery.
Esta: 935F-2DRC6_ver2.zip (eu não consigo encontrar o link dela, mas foi baixada daqui mesmo do xda) ela tem root.
mesmo assim, não consigo efetuar ligações.
Eu tentei voltar pelo Odin para a 6.0, mas quando seleciono BL, o flash aborta com erro, ("SW REV CHECK FAIL : [system]Fused 2 > Binary 1")
E se eu flash sem BL, mas adicionando todos os outros, eu tenho bootloop, e não tenho mais o recovery, nem mesmo o original.
eu preciso voltá-lo para a 6.0, me ajudem por favor..."
Click to expand...
Click to collapse
Not sure why the update would knock you phone off the network. When you say " it doesn't show the number" are you talking about your IMEI or phone number? The error you are getting from odin maybe because you are a higher binary now, you cannot downgrade the binary.
Go to settings, about phone and signal, do you see your phone settings populated in there?

Fear_The_Fluff said:
Not sure why the update would knock you phone off the network. When you say " it doesn't show the number" are you talking about your IMEI or phone number? The error you are getting from odin maybe because you are a higher binary now, you cannot downgrade the binary.
Go to settings, about phone and signal, do you see your phone settings populated in there?
Click to expand...
Click to collapse
yes!!
I see my phone number, I see my correct imei, and when I select to search for networks, he finds them all.
but when I select my carrier, or any other, I have the information:
"Not registered on the network, please try again later"
thanks!!

sound estrange
Does anyone confirm something for me?
when I rock my G935f back and forth, I hear a noise, like a disconnected connector, I need someone to test me, I think the antenna connector is disconnected ..

please..
I found that the device is foreign, it is not the version that comes to Brazil, I need help, please,
Does anyone guide me how to back my smartphone to 6.0 via odin?
I tried several but I do not have the original recovery anymore, after I installed twrp, no rom stock (via odir), boot, and I can not access the original recovery anymore, being forced to install twrp again and install a custom one. .
help me.....

I'm from Brazil as well, and I have the same problem. I even paid people on the web from places like like "Mercado Livre" (Brazilian eBay) to do a fix, but nothing worked, still have the phone not working with me....
So sad....

Download z3x pro cracked and root then patch cert on box and enjoy

Related

IMEI NULL / baseband desconhecida

Deixei meu celular carregando e quando fui olhar ele estava sem imei, ai ja instalei outras rooms ja fiz de tudo e o imei dele não volta e não tenho backup da efs oq eu faço?
nicolaslepe2 said:
Deixei meu celular carregando e quando fui olhar ele estava sem imei, ai ja instalei outras rooms ja fiz de tudo e o imei dele não volta e não tenho backup da efs oq eu faço?
Click to expand...
Click to collapse
Translation of the quote above: "I left my cell phone on charge, and when I went to look at it the phone was missing its IMEI. Unfortunately I've already installed other ROMs. I've done everything and the IMEI does not come back. I have no backup of my EFS partition. What do I do?"
Well, the first thing to do is to follow the site rules. All posts must be in English.
If you haven't tried it already, install a stock Android 5.x ROM via Odin and see if that restores your IMEI. If it doesn't, you'll have to take the S4 in to the service center, since you made no backup of the IMEI and EFS.
Bem, a primeira coisa a fazer é seguir as regras do site. Todas as mensagens devem ser em Inglês.
Se você ainda não tentou fazê-lo já, instale uma ROM estoque 5.x Android via Odin e ver se que restaura o seu IMEI. Se isso não acontecer, você terá que tomar o S4 para o centro de serviço, desde que você não fez backup do IMEI e EFS.

Does anybody have an official 6.0.1 backup for Latin America xt1563 DS?

Hey, I have a PureNexus 7.1.2 ROM and I want to go back to an official 6.0.1, but I don't have any backup and I don't know how to install the only official ROM I found for LATAM (I'm a new user so I can't share links, but surely you know that GitHub motoxplay file, I found it there) since it can't be installed via twrp, and it doesn't have the right format to be installed by fastboot commands either.
I would appreciate if anybody knows how to install that ROM (file_delta-ota-Blur_Version.24.61.52.lux_retla_ds.retla.en.01) or has a Latin America backup they could share.
check post #2:
https://forum.xda-developers.com/moto-x-play/general/rom-xt1563-brasil-stock-6-0-twrp-t3272979
it's not retla, but comes from latin america
Check this post too, there are lots of stock ROMs.
Metagesa said:
Hey, I have a PureNexus 7.1.2 ROM and I want to go back to an official 6.0.1, but I don't have any backup and I don't know how to install the only official ROM I found for LATAM (I'm a new user so I can't share links, but surely you know that GitHub motoxplay file, I found it there) since it can't be installed via twrp, and it doesn't have the right format to be installed by fastboot commands either.
I would appreciate if anybody knows how to install that ROM (file_delta-ota-Blur_Version.24.61.52.lux_retla_ds.retla.en.01) or has a Latin America backup they could share.
Click to expand...
Click to collapse
Instala via RSD Lite, voltar pra stock não é tão fácil a ponto de voltar pelo TWRP hehehe... enfim, baixa o firmware mais novo no Github, baixe os drivers certos do seu celular em seu computador, extraia o firmware em uma pasta vazia, no RSD Lite vá onde há 3 pontinhos e leve até o arquivo que você extraiu, conecte seu moto x play no computador depois de coloca-lo em modo fastboot, espere que seu dispositivo tenha sido reconhecido pelo programa e comece a instalação, rápida e simples! há um modo mais chato e complicado... mas creio que não vai ser necessário, a não ser que tenha dado erro neste!

Help please! Por favor me ajudem

Olá galera do XDA, por bastante tempo venho baixando e flasheando roms daqui, eu amo esse site! Mas ainda sou novato nessa área e hoje eu encontrei um problema que fez eu quebrar a cabeça na internet e não consigo uma solução, eu estou tentando fazer downgrade do bootloader e o modem 6.0.1 pro 5.0 mas tá dando Failed no odin, vale ressaltar que o Bootloader e o Modem que eu estou usando é o do G900F e meu celular é o G900M mas eu já fiquei sabendo que as coisas do G900F tem compatibilidade com o G900M, e a rom que eu estou tentando usar é 5.1.1 mas com o bootloader e o modem do lolipop eu já consigo né? Eu uso o bootloader e modem da rom stock do meu celular e rom fica bugada, fica sem wi-fi e os botões de voltar e aplicações recentes ficam inutilizáveis. E eu já não sei mais o que fazer. Se vocês poderem e ajudar eu ficaria muito feliz!
Esperam que entenda o que eu escrevi
Hello XDA, I have been downloading and flashing roms for a long time, I love this site! But I'm still new to this area and today I found a problem that caused me to break my mind on the internet and I can not find a solution, I'm trying to downgrade the bootloader and the modem 6.0.1 pro 5.0 but it's giving Failed odin, That the Bootloader and the Modem I'm using is that of the G900F and my cell phone is the G900M but I already knew that the things of the G900F have compatibility with the G900M, and the rom I'm trying to use is 5.1.1 but with The bootloader and lolipop modem I already can, right? I use the bootloader and modem of the rom stock of my cell phone and rom gets bogged down, runs out of wi-fi and the back buttons and recent applications are unusable. And I no longer know what to do. If you can help me I would be very happy!
I don't speak english guys, sorry
it happens to me it's all about the modem and bootloader
you should have a lolipop bootloader and modem to run lolipop and kitkat perfectpy.
if you have mm bootloader and modem and flash the kk or lp rom the navigation hardware bottons won't work.
If you flash a STOCK lollipop ROM it should fix your bootloader issue.

flaha Remote Failure no Moto g4 plus xt1640.

pessoal, estou tendo muitos problemas ao tentar restaurar a rom do meu xt1640, tudo começou depois de uma atualização o aparelho simplesmente desligou e morreu, ainda consegui ressuscitar mas não consigo reinstalar a rom dele, mostra falha em todos os comandos e não sai da tela de fastboot já tentei muita coisa ate paguei para um programador tentar restaura-lo, mas sem sucesso até agora, o erro que mostra é (FAILED (REMOTE FAILURE)) se alguém já passou por isso e conseguiu resolver, dá uma ajuda aqui por favor, eu já não sei o que fazer pra conseguir meu aparelho de volta e sinceramente estou sem condições de comprar outro. já baixei várias Roms para saber se tinha alguma compatível com meu aparelho mas até agora nada. por favor preciso muito de ajuda, desde já agradeço a qualquer um que se disponibilizar e ler esse post e tentar me ajudar. obrigado.
I'm having a lot of problems trying to restore the rom of my xt1640, everything started after an update the device simply shut down and died, I still managed to resuscitate but I can not reinstall the rom of it, it shows failure on all the commands and it does not leave the screen I have tried a lot of stuff until I paid for a programmer to try to restore it, but without success so far, the error that shows is (FAILED (REMOTE FAILURE)) if someone has already gone through this and managed to solve it, please help here , I no longer know what to do to get my device back and I'm honestly unable to buy another. I already downloaded several Roms to see if I had any compatible with my device but so far nothing. Please, I need a lot of help, thanks in advance for anybody who makes themselves available and read this post and try to help me. thank you.
@alanpereira hello and welcome, please be so kind and edit your post and add at least an English translation cause it's an English forum(see forum rules) :good:
I'm sure you'll receive help faster
Can you please confirm if you also get an error of security version downgrade???
If yes, It seems you are flashing old firmware on your device..
Try this, if you have not.. https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
Flash the ROM and bootloader from above link..
For gpt.bin, go here https://forum.xda-developers.com/moto-g4-plus/how-to/ota-february-2018-npjs25-93-14-15-t3770286
Download this file and extract only gpt.bin and flash it...
Flash gpt.bin first and then bootloader, then reboot to bootloader and then flash stock rom!
I'm having quite the same issue... first, I tried to root my xt1640 and it has bricked.. I was able to install stock rom nougat, then I did an OTa update and it has bricked again, this time I couldn't even enter bootloader, then I followed this guide forum.xda-developers.com/mot...guide-t3657761
I entered some kind of a bootloader with "start", then, when I try to flash gpt.bin, I get an error with the warning "Security version downgrade" and after that, a failed message... I tried lots of gpt's with no success!
estou com o mesmo problema alguem conseguiu resouver?
gabriel-puglisi said:
estou com o mesmo problema alguem conseguiu resouver?
Click to expand...
Click to collapse
You are trying to flash an older version of Stock ROM.
Use the latest fastboot Stock ROM from here: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138

S10+ change a ROM from Paraguay to Brazil . Is that possible?

I bought a device from Paraguay. however, my Samsung pay does not work. I'm from Brazil, I would like to know if there is any way to change the Rom of the device to some that works. I already tested the rom of Brazil ZTO, but it did not work.
Rlimasts said:
I bought a device from Paraguay. however, my Samsung pay does not work. I'm from Brazil, I would like to know if there is any way to change the Rom of the device to some that works. I already tested the rom of Brazil ZTO, but it did not work.
Click to expand...
Click to collapse
What happened when you flashed the ZTO through oding? Here i maneged to change my original ZTO(claro) to ZTO, no problems at all.
uvitor said:
What happened when you flashed the ZTO through oding? Here i maneged to change my original ZTO(claro) to ZTO, no problems at all.
Click to expand...
Click to collapse
Eu usei o odin com a ROM ZTO. Ele faz todo o procedimento normalmente mas ao reiniciar para tela de idioma ele já volta em espanhol e quando vou verificar a versão do SW está como UPO e não ZTO. Já fiz com chip de operadora dentro e fora do aparelho, já dei factory reset várias vezes e não volta. Sempre dá a mesma coisa.
Um rapaz no YouTube disse que o CSC desses aparelhos do Paraguay são bloqueados, por isso não consigo mudar de ROM.
Alguém sabe me dizer se a informação procede?
I used odin with the ZTO ROM. It does all the usual procedure but when restarting to language screen it is already back in Spanish and when I will check the version of the SW is like UPO and not ZTO. I have already done with the operator chip in and out of the device, I have reset factory several times and not return. It always does the same thing.
A guy on YouTube said the CSC of these handsets from Paraguay are blocked, so I can not change ROMs.
Can anyone tell me if the information comes?
Rlimasts said:
Eu usei o odin com a ROM ZTO. Ele faz todo o procedimento normalmente mas ao reiniciar para tela de idioma ele já volta em espanhol e quando vou verificar a versão do SW está como UPO e não ZTO. Já fiz com chip de operadora dentro e fora do aparelho, já dei factory reset várias vezes e não volta. Sempre dá a mesma coisa.
Um rapaz no YouTube disse que o CSC desses aparelhos do Paraguay são bloqueados, por isso não consigo mudar de ROM.
Alguém sabe me dizer se a informação procede?
I used odin with the ZTO ROM. It does all the usual procedure but when restarting to language screen it is already back in Spanish and when I will check the version of the SW is like UPO and not ZTO. I have already done with the operator chip in and out of the device, I have reset factory several times and not return. It always does the same thing.
A guy on YouTube said the CSC of these handsets from Paraguay are blocked, so I can not change ROMs.
Can anyone tell me if the information comes?
Click to expand...
Click to collapse
He is correct.
UPO devices are region locked, and the normal CSC change method does not work on those devices.
MeltdownSpectre said:
He is correct.
UPO devices are region locked, and the normal CSC change method does not work on those devices.
Click to expand...
Click to collapse
so, is there any method to make Samsung pay work in these models of Paraguay?

Categories

Resources