Inglés traductor:
Hello good day. I tell you that I bought a new Chinese Android radio for my vw, but recently I am having trouble configuring the canbus, to adapt the commands to the steering wheel. I try to enter the "factory settings", I put the password "8888", then I try to access "protocol setting, and it bounces back.
Stereo information:
android: YT9218DH_ADH
system: 10.1
XY AUTO: 1.1 (8227L)
display: 1024 * 600
mcu1: 3.1 (8227L)
cpu: A7 1.3GHZ X4
flash:32G
DDR:2G
Can bus decoder: Raiser for: all vw, skoda, seat cars
aida 64:
Model: YT9260
brand: alps
Device: 8227L_demo
Español :.
Hola, buenos días. Les cuento que comprado una nueva radio china Android para mi vw, pero recientemente estoy teniendo problema para configurar el canbus, para adaptar los comandos al volante. Intento ingresar a la "configuración de fábrica", pongo la contraseña "8888", luego intento acceder a "protocol setting, y me rebota para atras.
Informacion del estereo:
android: YT9218DH_ADH
sistema: 10.1
XY AUTO: 1.1 (8227L)
display: 1024*600
mcu1: 3.1 (8227L)
cpu: A7 1.3GHZ X4
flash:32G
DDR:2G
Can bus decoder: Raiser for: all vw, skoda, seat cars
aida 64:
Modelo: YT9260
marca: alps
Dispositivo: 8227L_demo
View attachment 5255095
Demostración de lo que me sucede:
problem demonstration:
A alguien le ha pasado lo mismo? Cualquier sugerencia es bienvenida. Muchas gracias
Someone has been the same? Any suggestion is welcome. Thanks a lot
Is the canbus decoder plugged in right if so try and disconnect battery for a few seconds and reconnect if that doesnt help ask the seller if they can send you a new canbus decoder
I have the same problem and still can’t find an answer to it...
Extrucker11 said:
Is the canbus decoder plugged in right if so try and disconnect battery for a few seconds and reconnect if that doesnt help ask the seller if they can send you a new canbus decoder
Click to expand...
Click to collapse
Yes, everything is correctly connected. Everything was working fine, until I factory reset the android settings. after I restored the factory settings it stopped working.
Sí, todo está conectado correctamente. Todo funcionaba bien, hasta que restablecí la configuración de Android de fábrica. después de restaurar la configuración de fábrica, dejó de funcionar.
RichardBaldwin said:
I have the same problem and still can’t find an answer to it...
Click to expand...
Click to collapse
still haven't been able to solve it?
Nope, I’m at the point where I think the canbus box is knackered.
xenzoenzox said:
Yes, everything is correctly connected. Everything was working fine, until I factory reset the android settings. after I restored the factory settings it stopped working.
Sí, todo está conectado correctamente. Todo funcionaba bien, hasta que restablecí la configuración de Android de fábrica. después de restaurar la configuración de fábrica, dejó de funcionar.
Click to expand...
Click to collapse
This is literally what happened with mine.
Having same issue in mine MTK YT9216CJ after upgrade to 9.1, Reset multiple times but not able to access Canbus or protocol settings. Any suggestions would be helpful to fix. Removed and reconnected canbus wiring but no help.
I think it’s a case of getting updated software, but there isn’t an easy go to place for the software.
xenzoenzox said:
Traductor de ingles:
Hola buen día. Les cuento que compré una nueva radio Android china para mi vw, pero recientemente me cuesta configurar el canbus, para adaptar los comandos al volante. Intento ingresar a la "configuración de fábrica", pongo la contraseña "8888", luego trato de acceder a la "configuración del protocolo" y se recupera.
Información estéreo:
Android: YT9218DH_ADH
sistema: 10.1
XY AUTO: 1,1 (8227L)
pantalla: 1024 * 600
mcu1: 3,1 (8227L)
CPU: A7 1.3GHZ X4
flash: 32G
DDR: 2G
Can bus decodificador: Raiser para: todos los coches vw, skoda, seat
aida 64:
Modelo: YT9260
marca: Alpes
Dispositivo: 8227L_demo
Español :.
Hola buenos dias. Les cuento que comprado una nueva radio china Android para mi vw, pero recientemente estoy teniendo un problema para configurar el canbus, para adaptar los comandos al volante. Intento ingresar a la "configuración de fábrica", pongo la contraseña "8888", luego intento acceder a "configuración de protocolo, y me rebota para atras.
Información del estereo:
Android: YT9218DH_ADH
sistema: 10.1
XY AUTO: 1,1 (8227L)
pantalla: 1024 * 600
mcu1: 3,1 (8227L)
CPU: A7 1.3GHZ X4
flash: 32G
DDR: 2G
Can bus decodificador: Raiser para: todos los coches vw, skoda, seat
aida 64:
Modelo: YT9260
marca: alps
Dispositivo: 8227L_demo
[ATTACH = full] 5255095 [/ ATTACH]
Demostración de lo que me sucede:
demostración del problema:
[MEDIA = youtube] -1JGHe4Ex3I [/ MEDIA]
A alguien le ha pasado lo mismo? Cualquier sugerencia es bienvenida. muchas gracias
¿Alguien ha sido igual? Cualquier sugerencia es bienvenida. muchas gracias
Click to expand...
Click to collapse
friends, someone can help me, I have a radio that I buy, the microphone does not work, the microphone is listening too low, people do not hear me and I need an update and I don't know where to download the software or driver to update it, someone could help me this is the information I have
Stereo Information:
Android: YT9216BJ_00012_V001
system: Adroid 10.1
XY AUTO: J6.8 (X2)
CAN BUS: Hiworld Weichi-Old Cruze-v2.22.0-connect
DDR: 1GF Flash: 16G
MCU1: 4.0 (X2)
CPU: A7 1.3GHZ X4
amigos alguien me puede ayudar, tengo una radio que compre no me funciona el micrfono se escuvha demasiado bajo las personas no me escuchan y nesecito una actualización y no se donde descargar el software o driver para actualizarlo alguien podria ayudarme este es la informacion que tengo
Información del estereo:
Android: YT9216BJ_00012_V001
sistema: Adroid 10.1
XY AUTO: J6.8 (X2)
CAN BUS: Hiworld Weichi-Old Cruze-v2.22.0-connect
DDR: 1GF Flash: 16 G
MCU1: 4.0 (X2)
CPU: A7 1.3GHZ X4
Same problem any new help or solutation
I’ve bought a new canbus box and that hasn’t helped…
RichardBaldwin said:
I’ve bought a new canbus box and that hasn’t helped…
Click to expand...
Click to collapse
i think that the problem is software not a hardware problem ..
i'm looking for how to downgrade the software
I’m not sure, I’ve gone through various stages of software and it’s always the same case, even on the original it refused to work.
¿Habéis encontrado la solucion?, tengo el mismo problema
Mod translation: Have you found the solution? I have the same problem
I bought Chinese Android radio with version 11, the steering wheel key was working good, but after a factory reset stop working and I try to setup as before using the app and factory setup but not working, try enter in can setup and choose the car but still not working and then try different car brands but not look, anybody can point me what I have to do?
Related
Hi, I'm Jorge from Argentina, new in the forum. I arrived here because of the limited amount of information I find in Spanish, so I apologize for my English.
I recently acquired a Chinese stereo with android 5.1, as my car is a VW Jetta I also bought the canbus interface.
I connected everything and the stereo put the screen in black and to the second the symbol that I attached in the photo, I verified that Android starts because if I disconnect the interface canbus appears the screen and the stereo works well but without controls of steering wheel, illumination, etc.
Can you guide me to verify?
Thank you!
I can not upload the photo because I'm new, it's the black screen with a sign ¨!¨ In a triangle
Probe by cutting the cable of the canbus interface that corresponds to the camera of reversing and it works, but I do not have communication with the can bus.
Mods, please allow me to answer in spanish.
Hola Jorge, proba entrar en el menu de configuracion de fabrica. En mi equipo la contraseña es 126. En el item CanBus podes probar otro modo hasta que encuentres uno que responda bien.
Yo tengo el equipo en un fiat bravo, y si bien me toma los controles de volante y la camara trasera (detecta la marcha atras del canbus), no me muestra en pantalla la apertura de puertas o otra info tipica presente en el canbus.
Creo que depende del modulito decoder que tengas y del modo que setees en la configuracion.
Mods, please allow me to answer in spanish.
Hola Javi, eso hice, intenté con varias configuraciones pero ninguna funcionó. Además apenas conecté la cajita can bus daba la señal de marcha atrás sin siquiera estar puesta. No se si viste que al estereo le llegan 3 cables de alimentación, batería, acc y masa. El canbus tiene que manejar el cable de acc para permitir al estereo prender, sin embargo ni eso hace la cajita, será que está fallada?
---------------------------------------------------
Hi Javi, I did, I tried with several configurations but none worked. Also as soon as I connected the box can bus gave the signal of reverse without even being put. I do not know if you saw that to the stereo you get 3 power cables, battery, acc and ground. The canbus has to handle the cable of acc to allow the stereo to ignite, however nor does that make the box, is that it is failed?
Genérico YT-FY6307 - 6.95 "HD Pantalla táctil capacitiva Car WIFI Reproductor estéreo
tengo esta unidad y no arranca solo se que este es el modelo y que usa intel sofia 3gr
Hello, I would like to update my browser from the brand isudar android 9 to Android 10. I don't know if it can be done, if there is any information on how to do it I would like you to comment, I am Spanish and my English is not very good, I hope to understand , greetings and thanks
Hola, me gustaría actualizar mi navegador de la marca isudar android 9 a Android 10. No sé si se puede hacer, si hay alguna información de cómo se hace me gustaría que comentaras, yo soy español y mi ingles no es muy bueno, espero entenderme, saludos y gracias
Buenas,
The official website from Isudar actually explains how to do it.
Not all the radios are compatible, so far it works for px3 and px5 https://www.isudar.com/blogs/download/how-to-update-px30-android-9-to-android-10
Not Android Auto.
Hello everyone,
I bought this box: https://a.aliexpress.com/_mOaTBl9 and update the version of it after that we cant connect the wifi, when I try to connect any wifi I type the password and touch connect button it show wifi search screen and cant connect.
anyone can help me?
My car is Citroen C5 Aircross 2019
the version I use:
PC new firmware download link: https://drive.google.com/drive/folders/1AlJ5FpCTPq47nx24q8DxJismK57x1GkW?usp=sharing
PC upgrade guide:
Ai Box PC.pdf
drive.google.com
U disk upgrade, new firmware download link:
upgrade_pkg.zip
drive.google.com
U Disk Upgrade Guide:
Ai Box upgrade guide.pdf
drive.google.com
System version number: 20210310
Release Notes:
1. Add Turkish
2Optimize google login
3.21 Audi models support
4. Nissan car-machine connection support
5. Optimize the display number of Bluetooth phones in third-party applications
6. Porsche 21 taycan connection support
7. Skoda 21 connection support
Yusufcivirr said:
Hello everyone,
I bought this box: https://a.aliexpress.com/_mOaTBl9 and update the version of it after that we cant connect the wifi, when I try to connect any wifi I type the password and touch connect button it show wifi search screen and cant connect.
anyone can help me?
My car is Citroen C5 Aircross 2019
the version I use:
PC new firmware download link: https://drive.google.com/drive/folders/1AlJ5FpCTPq47nx24q8DxJismK57x1GkW?usp=sharing
PC upgrade guide:
Ai Box PC.pdf
drive.google.com
U disk upgrade, new firmware download link:
upgrade_pkg.zip
drive.google.com
U Disk Upgrade Guide:
Ai Box upgrade guide.pdf
drive.google.com
System version number: 20210310
Release Notes:
1. Add Turkish
2Optimize google login
3.21 Audi models support
4. Nissan car-machine connection support
5. Optimize the display number of Bluetooth phones in third-party applications
6. Porsche 21 taycan connection support
7. Skoda 21 connection support
Click to expand...
Click to collapse
I had similar box and wifi did not work exactly the same. Upon boot up, the wifi is off, you turn on and it searches forever. Wifi module must be bad as i checked and it was physically connected with wire to board.
Hola buenas tardes soy nuevo en el foro, Daniel es mi nombre! queria hacer una consulta haber si me pueden ayudar, el dia de hoy actualize mi ai box CP600 con ios 9 4/64 y tengo el problema que enciendo el vehiculo y muchas veces o la mayoria no me toma el carplay inalambrico donde me aparace en pantalla para volver a conectar o entrar en modo android. envio fotos. Espero me pueden ayudar
danidedoc said:
Hola buenas tardes soy nuevo en el foro, Daniel es mi nombre! queria hacer una consulta haber si me pueden ayudar, el dia de hoy actualize mi ai box CP600 con ios 9 4/64 y tengo el problema que enciendo el vehiculo y muchas veces o la mayoria no me toma el carplay inalambrico donde me aparace en pantalla para volver a conectar o entrar en modo android. envio fotos. Espero me pueden ayudar
Click to expand...
Click to collapse
Ios 9 . Speak english
yuri76 said:
Ios 9 . Habla
Click to expand...
Click to collapse
Hola, buenas tardes, soy nuevo en el foro, ¡me llamo Daniel! Quería hacerte una pregunta si puedes ayudarme, hoy actualicé mi ai box CP600 con ios 9 4/64 y tengo el problema de que enciendo el vehículo y muchas veces o la mayoría de las veces no me lleva el Carplay inalámbrico donde aparece en la pantalla para volver a conectarse o ingresar al modo Android. Envío fotos. Espero qu
yuri76 said:
Ios 9 . Speak english
Click to expand...
Click to collapse
Hello, good afternoon, I'm new to the forum, Daniel is my name! I wanted to ask a question if you can help me, today I updated my ai box CP600 with ios 9 4/64 and I have the problem that I turn on the vehicle and many times or most of the time it does not take me the wireless carplay where it appears on the screen to reconnect or enter android mode. I send photos. I hope you can help me
danidedoc said:
Hola, buenas tardes, soy nuevo en el foro, ¡me llamo Daniel! Quería hacerte una pregunta si puedes ayudarme, hoy actualicé mi ai box CP600 con ios 9 4/64 y tengo el problema de que enciendo el vehículo y muchas veces o la mayoría de las veces no me lleva el Carplay inalámbrico donde aparece en la pantalla para volver a conectarse o ingresar al modo Android. Envío fotos. Espero qu
Hello, good afternoon, I'm new to the forum, Daniel is my name! I wanted to ask a question if you can help me, today I updated my ai box CP600 with ios 9 4/64 and I have the problem that I turn on the vehicle and many times or most of the time it does not take me the wireless carplay where it appears on the screen to reconnect or enter android mode. I send photos. I hope you can help me
Click to expand...
Click to collapse
The CP600P is not a 4/64gb but a 4/32G. What update do you have?
alguien me puede ayudar enviandome la catualizacion mas reciente de android 10.1para este car audio patalla 1024 x 768 pantalla vertical, tengo problemas de audio y se reinicia solo y quiero reinstalar android 10.1 el radio se lo instale a mi chevy cruze 2012 si alguien sabe donde descargar el archivo para actualizar android le agradeceria compartiera ya sea el archivo o el link de la pagina donde lo pueda descargar al siguiente correo [email protected]
disculpen si el ingles no es perfecto ya que utilise untraductor pues solo hablo espanol.
Can someone help me by sending me the latest update of android 10.1 for this car audio patalla 1024 x 768 vertical screen, I have audio problems and it restarts by itself and I want to reinstall android 10.1 the radio install it to my chevy cruze 2012 if someone knows where download the file to update android I would appreciate if you share either the file or the link of the page where you can download it to the following email [email protected]
sorry if the English is not perfect since it uses a translator because I only speak Spanish.